5800 V40 Firmware: Calendar Problem

Yesterday I updated my firmware to version v40 
This moring I had a reminder in my Calendar of my nokia 5800, when a reminder is show the screen it is different then before, Only one problem the touchscreen won't react, when i push stop nothing happens, when I push silence nothing happens, the reminders keeps going and the sounds keeps playing, I have to push the button to turn off my phone and then he comes back to the home screen.
Does anyone have the same problem? or a solution to this problem?
Solved!
Go to Solution.

Have u tried taking the battery and sim card out for 5 mins. Or reinstalling the firmware.
If not than try backing up your phone and reformat.
n97.

Similar Messages

  • 5800 V40 Music palyer problem

    I updated my 5800 to new v40 firmware, but now getting wired problem in Music player, its intermitently gets stuck in Music Player first screen where its displays 'Artists, Albums' etc. I am not even able to exit music player using 'Exit' option. I have to restart phone to get Music Player working again. Any advise regarding this would really helpful.
    Solved!
    Go to Solution.

    Google search 'Handy Taskman symbian' and you will find it... but remember, even after you kill the Radio task it will still not restart and operate normally until the phone is switched off/on anyway!
    I hope Nokia listens and updates the firmware again promptly - and adds the new Ovi Maps app to the firmware too (so we dont have to install it in precious phone memory! but maybe that's best stated in a new thread)
    Hit the Kudos if I helped, I could do with a little kudos in my life!
    Message Edited by ITEXNZ on 21-Jan-2010 07:05 PM
    If I've helped, please hit Kudos! I could do with a little kudos in my life.

  • 5800 alarm problems with v40 firmware

    After doing the update to v40 my alarm does not work properly (on both my 5800's), when the alarm goes off and the stupid orange and red bars come up saying snooz and stop they do nothing ! I hit them and the alarm just keeps going and going, I have to hit the red menu button and it goes to snooz mode, is there a way to revert back to v31 as I really do not like this newer v40 firmware.

    You have got to be kidding me. Everybody else was complaining about the keyboard not switching to full qwerty when rotated now you are complaining why it does that. Its not dumb, its called market request. And I like it better actually. I hate the landscape alphanumeric, and I know a lot would agree with me. Its not intuitive enough, the lansdscape alphanumeric.
    The connecting to wireless network is probably due to a messaging application your wife has on the phone. Its a normal thing since messaging applications like that do that since they are meant to be always connected to the web. 
    If you find my post helpful please click the green star on the left under the avatar. Thanks.

  • Creating calendar problems

    Spent a few hours last night making a calendar in iPhoto only to have it crash on the month of December. Any way to find the auto save file?
    Thanks

    wolfwill:
    Welcome to the Apple Discussions. I believe the calendar info is saved in the iPhoto6.library file. If there is a temp file it may be in the same folder that the pdf files get created for uploading and printing: /private/var/tmp/folders.501/TemporaryItems/iPhoto/. If you past that in the Go->Go to folder menu option in the finder it will take you there if that iPhoto folder has been created.
    If you haven't upgraded to 6.0.1 you might do so as that's supposed to have fixed the calendar problems.

  • Firmware update problem solved after Win XP SP3 -upd

    I'm one of the numerous victims of ZEN firmware updating problem. At the start I had Win XP SP2 and WMP. My player is ZEN Micro 5gb and after trying to update firmware it had firmware problem and stayed in the recovery mode. Firmware updater and ZEN Media Explorer couldn't recognize the player. So that's how I got it work again:
    1. Rolled back WMP to WMP9, updated it to WMP0.
    2. Removed ZEN Media Explorer and Jukebox driver (all Creative stuff) from Add/Remove programs in Control Panel.
    It didn't solve the problem. I also tried my player with couple of other computers, but it didn't help either.
    3. Installed Win XP SP3 -update.
    4. Reinstalled driver for ZEN Micro in Control Panel.
    5. Ran the firmware updater and this time it did recognize the player.
    (6. Updated WMP back to version and the player's still working.)
    Hope this will help you too.

    I can start the upgrading process, but at around 95% it stops, and says "firmware upgrade failed." I didn't uninstall WMP though, because I have Vista, and I hae no idea how to do it. I can only get my computer to recognize my 6G Zen when I go into recovery mode and choose 'reload firmware' then I connect it to the computer and I can start trying to upgrade it. If I dont go into recovery mode, its just a blank screen, the computer doesnt recognize it, and I can't even turn it off without reseting.
    ?I've tried so much, now when I try to upgrade, it loads a little bit and jumos to the end quckly and says "firmware upgrade fails" and nothing works. Do I have to try to do all the things you listed to fix this?

  • Xcode and firmware update problem

    Hi all,
    i've been working on my app for a few month now and i have about two more weeks until i finally submit it. everything went very good during development.. untill -
    by ACCIDENT i've upgraded my firmware to 3.1.2
    since my OS is 10.5.7, as i understand, i must install xcode 3.2.1. but this version also needs mac OS 10.6
    so it's realy frustrating for me...
    do i need now to upgrade/purchase OS 10.6 and also my xcode environment in order to continue working ?
    can't i make a rollback to other firmware version supported by my current 3.1.2 xcode ?
    i've searched the net endlessly and just couldn't find anyway to downgrade my firmware (i have a 5.11.7 baseband and 6.2 bootloader)
    please...
    any help ?

    GRe: Zen 8G This device cannot start code 0 and firmware update problem?Hello Tbg99,
    Welcome to Creative forums!
    Try booting the player in the recovery mode.
    . While the ZEN is off, press and hold down the play/pause button.
    2. While holding down the play/push button, push the reset button slowly using a paper clip/pin. You should feel the "click" sound when press it.
    3. Slide the On/Off switch towards the power button and hold it down until the recovery boot screen appears.
    Choose Clean Up then Reboot. If problem still persists, you may need to format the ZEN but take note that formatting will delete the contents of the device. To format the ZEN, boot the ZEN in the recovery mode again and choose Format this time.

  • BB10 Calendar problem SOLVED!!!

    BB10 Calendar problem SOLVED!!!
    Step 1: DO NOT do a device switch using BB Link!
    Step 2: On your old device, do a device switch using an "SD Card' - this helped me big time since it copied everything!
    Step 3: On your BB10 device, insert the old SD card, and complete the device switch using the "SD Card" option.
    Step 4: Voila! All your calendar, phone book and personal data is all transferred on to your new BB10.
    All the best!

    I had a blackberry 9780 (now a Z10)  When I go to setup on the old BB the "device switch" icon is not there.
    Is there anyway I can get that as an option on the phone so I can try what you suggest

  • 3.1 upgrade- calendar problem- error mssg interpretaion

    I just did the 3.1 upgrade and the calendar won't sync- the message is "replace the calendar on the iphone from the info tab in the iphone preferences"
    Not to be an idiot- but, I can't find "preferences" in the settings or calendar- anywhere. Can someone tell me what I am missing here????
    Thanks-

    the 4.3.1 upgrade has had many calendar problems - I'm actually surprised you've only had timing issues. Many people have lost events, seen duplicate events, and no longer receive invitations to calendared events. I have not yet heard from Apple how they plan on fixing this. It's definitely causing big problems for me and many others.

  • Zen 8G This device cannot start code 10 and firmware update problem

    I have read the threads in the forums on the same problem that I am having. It seems that there are few solutions for this and the ones that have been posted I have tried. Basically the problem is this, I made the silly mistake of trying to update the firmware on my Zen 8G since it was listed as a critical update. I downloaded the firmware but it failed and took me to the recovery screen. Instead of working with this, again silly me, I tried to use the Creative recovery tool. This downloaded the firmwary and started rebooting the player. At this point it just hung. I left it on for about 3 hours and nothing happened and it wouldn't turn off so I hit the reset button on the player. Now when I connect it to the computer it recognizes it as a creative zen but if I try to download the firmware the software says the player is not connected when it is. When I check the device driver, even though it shows it as a creative zen it says "This device cannot start code 0"? I have the latest Microsoft device driver loaded and it still doesn't work.
    I have tried this on two different computers, one using XP and the other using Vista. I get the same problem with each. It appears to me that the problem is not really with the device driver but somehow with the firmware. However, I am not an expert at this stuff.
    If anyone could please help I would appreciate it. This was a gift for my wife for the Christmas of 2007 so it is just out of warranty and the service people won't help.

    GRe: Zen 8G This device cannot start code 0 and firmware update problem?Hello Tbg99,
    Welcome to Creative forums!
    Try booting the player in the recovery mode.
    . While the ZEN is off, press and hold down the play/pause button.
    2. While holding down the play/push button, push the reset button slowly using a paper clip/pin. You should feel the "click" sound when press it.
    3. Slide the On/Off switch towards the power button and hold it down until the recovery boot screen appears.
    Choose Clean Up then Reboot. If problem still persists, you may need to format the ZEN but take note that formatting will delete the contents of the device. To format the ZEN, boot the ZEN in the recovery mode again and choose Format this time.

  • Xpress Music 5800 new firmware (V51.0.006)problem

    guy, i have this problem after updating my phone.
    - my music player keep repeat song even i make repeat off
    - hang when try to change radio station channel
    those who have this problem and have the solve, hope can give me some advice. Thanks

    /t5/Software-Updates/Nokia-5800-firmware-update-v51-0-006/td-p/738756

  • 5800 V40 problem. Screen does not off after chargi...

    Hi guys. I updated the firmware to V40 lately, but a serious problem appear. when i plug the phone to charge, the screen does not turn off unless i fiddle with the keylock switch. that's still acceptable, but when charging is complete, the screen turns on to say charging is complete, then refuses to turn off. i left my phone charging when i went to sleep and in the morning, the phone was hot from the screen left on the whole night. i can't possibly sit in front of my phone to wait for it to finish charging then take it out!
    I tried the following: soft reset with 7370, doesn't work. hard reset with green red camera button, problem still there. took out sd card and did another hard reset, still there. reinstalled the firmware, took out sd card, did a hard reset, and it still did not solve the problem. it is basically like a new phone with default settings and no data inside, but nothing seems to work.
    anyone out there have this problem too? it is just so irritating. even turning off the phone to charge does not work, the screen still shines nonstop....... grrrrrr...............

    You cant downgrade. Oftentimes the fix for these kinds of problems (update related) are as follows:
    1. Simple phone reset: Take out the battery for 10 minutes then power up again
    2. Reinstallation of firmware. Using Ovi Suite, reinstall the firmware.
    3. Reset: type in *#7370# and enter security code
    4. Hard Reset: hold the green, red and camera keys until the country selection menu comes up.
    If none of those work, then its time to go to the Care Point. Note that options 2 (may delete), 3, and 4 would delete all data on the phone and thus a back up is necessary.
    If you find my post helpful please click the green star on the left under the avatar. Thanks.

  • Nokia 5800 v40 updating problem!

    Hello
    So, I used NSU to my update my Nokia 5800 device, the code is on the list and both Ovi suite and NSU detect the new firmware, NSU downloads the update, then when it says " installing update" ( 15 minutes left ) it asks me to revome the USB connection, restart my device and connect it again, I did that, didn't work, removed the memory card and did it agian, didnt work. it showed the same message, so I used Ovi Suite, it did just the same thing, I thought my USB port has a problem, so I put the USB cable in another port ( I think that solved the ' conneciton has been lost with your device problem' but not for long, till I ran into another problem, " Iternal module error" I searchded for it, and this is what I  found /t5/Software-Updates/quot-Internal-module-error-quot-in-NSU-fix-offered-here/td-p/88351;jsessionid=5... I did what's mentioned there, it said "loadlibrary ("regsvr32 C:\WINNT\system32\msxml4.dll") failed - the specified module couldn't be found , any suggestions? Thanks.

    lol, sorry, "replying" for myself here,  the code is "regsvr32 C:\WINNT\system32\msxml4.dll" I use windows xp not NT, so  I changed it to "regsvr32 C:\WINDOWS\system32\msxml4.dll" which worked for me, now that my USB connection and Iternal Module problems are solved, I will try installing the new update using Ovi suite again, I will let you know what happens, bare with me

  • Nokia 5800 Firmware Update Problem

    Hey, My nokia phone has the V50.0.005 Firmware but i read that v52.0.007 is the newest, when i try to update the phone the OVI Suite and the Nokia Update won't find the new one and say that i already have the newst, why is that and how can i solve this problem?
    Solved!
    Go to Solution.

    I can not update my nokia 5800 xm code: 0575581 to the new firmware 52.0.002
    Please help me.

  • Nokia 5800 Updated Firmware - Problems with Alarms

    I have just updated to Custom Version 40.0.005.C01.01 and have a similar problem to other owners.
    When my phone is locked and a reminder comes on, linked to the Calendar, I have no way of Stopping the alarm.
    I have tried removing the battery, as suggested for other problems, but that doesn't work.
    Any advice welcome

    we answered it 10000000 times, if you did one single search here you would  find it
    it's an ARROW not a button .... SWIPE your finger in the same direction of colour movement
    it's the same in incoming calls while screen is locked
    watch this  :
    V.40 ... how to answer a call or stop an alarm
    -you can show appreciation to my posts if it helped or useful by pressing the green Kudo star beside my post that hepled
    -if my answer was the solution , so click accept as solution button
    Started From Nokia 3310 , Now with Nokia N97 v.22.0.110 + N900 PR1.2

  • Nokia 5800 and new V40 firmware

    Just updated the firmware on my phone and have a minor problem.
    When someone rings me and the phone is unlocked I can answer the call ok, but when the phone is locked and someone rings it says answer in green and unlock is blue, I am unable to answer the call until I unlock the the phone then tapping answer, answers the call, how can I answer the call without unlocking the phone?

    grschinon wrote:
    CONGRATULATIONS -- WE HAVE A WINNER!
    You're the first person I've seen to complain about this.
    Have you not noticed the following?:
    a) it's an arrow you're shown, pointing to the right, which implies movement.
    b) the arrow is animated in a left-to-right direction, also implying movement.
    The arrow is not a button, it is a suggestion. Next time, try swiping the screen in the same direction as the arrow and in the same direction as the animation: from left to right.
    There were dozens of threads about this when the feature first appeared on the N97 last year.
     You can also unlock the phone with the physical button on the right and it will take you to a more familiar view. It's like pressing the silence button, the call is still incoming but there's no ring.

Maybe you are looking for