5800 V50.0.005 FW Bug, Secure Widget Installer loo...

I installed the new firmware for my 5800, it b0rked. Basically a program called a SecureWidgetPreInstaller goes on a loop, it doesn't finish the installation procedure, rather uses all the available processing power of the cellphone and causes unresponsiveness of a major kind.
I'm not able to force the program to shut down and as such, the phone is unusable. Rebooting doesn't help as the program starts itself automatically during the boot-up.
Any ideas? Comments? Help? 
Cheers

Got no such system error. Did you update via NSU, FOTA or Ovi?
Please note that an existing corruption in the phone during an update may cause the update to go haywire, and as such I strongly advise to hard reset the phone before and after the update, which is why I probably do not get the error.
Now since you guys are having an error, I would suggest to hard reset the phone, reinstall the firmware via NSU or Ovi Suite, then do a hard reset again. The procedure for a hard reset is:
A hard reset (x6, 5800 and 5230 only) is done by the following (warning, this deletes all data on your phone):
1.) Turn off the phone and remove battery for 5min
2.) Reinsert battery
3.) Press and hold the green, red and camera buttons. DO NOT LET GO.
4.) While holding the three buttons, press the power key to boot the phone up.
5.) Keep on pressing until you see the country selection screen.
A correctly done hard reset would show you that everything on the phone (contacts, messages, calendar entries, etc) would be deleted. So it is advisable to back them up. Upon restoration, do not restore settings or files if possible.
If you find my post helpful please click the green star on the left under the avatar. Thanks.

Similar Messages

  • NOKIA 5800 V50.0.005. PROBLEM PLEASE HELP.

    HI everyone,
    I updated my NOKIA  5800 from v40 to v50 through over-the-air.
    I didn't got all the features like quickoffice, cherry 2.1, Ovi music, Lifecasting, Rihanna servicelauncher.....etc
    My update package was only of 9.8 MB.Now I too can't reinstall the update through my NSU or OVI updater as the latest version of NSU is not showing any option to reinstall or repair...Please help in solving the problem . I want all the features of v50.0.005 in my NOKIA 5800.THANKS..

    If the update is not available for you, then its not. Just wait for it
    Reasons why a phone cannot update:
    1. It is a country variant - country variants often get the updates later, or have updates skipped altogether. A Turkish country variant product code for example, skipped v40 and updated from v31 straight to v50.
    2. It is network branded - phones acquired from network providers or these providers' stores SIM free are branded, and will not get updates until the networks approve and modify the updates to their liking.
    3. Special editions - These special editions are chartered editions and may never get updates unless taken to a Nokia Care center.
    If you find my post helpful please click the green star on the left under the avatar. Thanks.

  • Nokia 5800XM V50.0.005 FW bugs!!!!

    Hi there,
    Today,Nokia sent to my mobile a message that it is a new update!
    Because we had many problems with the last update V40.0.005 I decided to make a new topic and when everybody find something wrong with his device will write here!
    Attention please: You must be carefull when you write here a "bug" because it could be a good idea to improve our phones!
    I would appreciate it if you had attached photo or video with your problem even if it is possible!
    Thanks.
    Solved!
    Go to Solution.

    i figured out that the aac format files cause the music library to endless refreshing
    the problem was solved after converting all my aac to mp3
    but what i wan is aac!!!
    mp3 takes much mmc spaces!!!
    what a stupid bug is tis
    Update:
    real problem detected
    aac file to cause music library endless refreshing is because of the ID3 tag being used
    b4 v50 all my aacs were saved using ID3v2
    i tried to convert them into earlier version ID3v1 just now , the music library refreshed without causing any trouble, but all the album arts inside the aac files were all gone = =
    taken frm symbian-freak forum

  • Bug in New Firmware V50.0.005 for Nokia 5800 Xpres...

    Hi I am facing  some bug in new Firmware V50.0.005
    1) In the music library it is not showing any song.(i am having arround 500 songs in memory card)
    2) If i try to refresy the library, it will not complete the process. (i.e. continuesly it will show refreshing and i have manuly stoped after 1 hour). and still no songs in all songs list.
    3)While playing radio it will hang after some time.(After 15 min to half an hour). you have to restart  your phone to close that radio application. (no other go)
    If any Solution is there for this please let me know.
    Thanks in advance
    Ssandesh T S

    For the radio problem, You may have to try to reinstall your firmware, or failing that, you may have to do a reset.
    For the music library:
    1. Connect your 5800 to you PC in Mass Storage Mode
    2. On your PC you will need to have allowed to “Show” hidden files, do this from Explorer/Tools/ Folder Options/ View and select “Show hidden files and Folder”
    3. Open your SD memory card/Removable Disk in My Computer on PC
    4. Go to E:\ Private there you will see 3 folders 101f8857, 101ffca9 and 10281e17 .
    5. Go to Private\101f8857\Cache\E there you will see .dat files. Delete all the .dat file BUT NOT the E Folder. Shown above right
    6. Now go to Private\101ffca9 there you will see another .dat file, Delete the dat file NOT the folder.
    7. Finally go to Private\10281e17 There you should see 4 files 2 are Mp3 files other are Podcast files. Delete mpxv2_2.db & mpxv2_2.db-journal for Mp3 files list and Delete pcv6_1.db & pcv6_1.db-journal for Podcast files list. Shown above right
    8. Close all windows and disconnect your Phone. Go to Music Library and it should automatically start a refresh.
    If you find my post helpful please click the green star on the left under the avatar. Thanks.

  • 5800 orientation problem after V50.0.005 upgrade

    After upgrading the firmware on my Nokia 5800 to V50.0.005, it has become really difficult to get the phone to change from portrait to landscape display mode. It takes really long.
    Any thoughts on what the problem might be?

    Maddmatt is right. It seems that v50 introduced a number of files which proved to be incompatible with certain system files which were created as we use our phone, like app association files, playlist files, etc. This is due perhaps to a number of things like a new music player, RAM management (there are more free RAM now than v40 according to memcheck on my phone). A hard reset is in order.
    If you find my post helpful please click the green star on the left under the avatar. Thanks.

  • Firmware update V50.0.005

    Recently i've updated my Nokia 5800 xpressmusic to v50.0.005, but since then i can't no longer use the big keypad to input messages (only the small one and the alphanumerical one and handwriting). Also i can't no longer make connection with ovi suite. It says device not recognized. I've tried to reinstall the update, but wasn't able to.
    Some help please?

    It should automatically switch to full qwerty when you turn your phone sideways.
    You need Auto Rotation to be 'on'.

  • How to maintaing E-Business suite with latest product levels and bug/securi

    Hi All,
    How to maintaing E-Business suite with latest product levels and bug/security fixes?
    backup strataegies for database and E-BS suite?
    what is mean by gather user requirements?
    Please some one explain briefly...........
    Thanks

    Please post your question in the appropriate forum.
    E-Business Suite
    http://forums.oracle.com/forums/category.jspa?categoryID=3
    Thanks,
    Hussein

  • Nokia 5800XM V50.0.005 FW experiences

    New firmware release for Nokia 5800XM: V50.0.005
    info: http://symbian-freak.com/news/010/04/new_firmware_​for_nokia_5800_now_available_as_fota_update.htm
    Experiences?

    Sorry I know is in spanish I just make a screen shot
    but the problem it does't download
    Attachments:
    v50.xx.png ‏78 KB

  • Bad user experience/errors with Adobe Air widget installation

    I'm having a nervous breakdown at work (it's 10pm and I'm
    still in the office), an Adobe Air widget application I've built is
    somehow causing the client to panic (they can't install or run the
    Adobe Air installation or the widget and now they feel all their
    users are having the same problem). If anyone has a minute to try
    this out and let me know if the widget installs correctly of if you
    have any recommendations on a better user experience I'll greatly
    appreciate it. The client is receiving an error message when
    installing Adobe Air (error 0 or something).
    widget is on the bottom left (installs for PC and Mac). If
    the widget installs without any glitches please let me know. God
    bless.
    http://stayonhermind.com

    The application installed just fine for me. I'm running
    Windows XP SP2 and I already have AIR 1.1 runtime installed.
    I do have a few suggestions for improvement though! Just take
    or leave any or all of these! :)
    In your popup you say,
    "Before installing the 9IX Rules Widget verify that
    you’re running the latest version of Adobe Flash."
    Is this really a necessary requirement? If you are
    downloading the .air I think it would not matter whether or not you
    have Flash installed.
    Then you say,
    "After installing Adobe Air (link below), return to this page
    and re-install the 9IX Rules Widget. Install Adobe Air Now .
    Otherwise click on the button below (the widget install button)."
    I understand you are trying to make this easy for people but
    to me this seems confusing.
    <GENERAL AIR COMMENT>
    If someone does not have AIR runtime already installed I
    thought running a .air would trigger the download and install. If
    not this gets pretty complicated. How do you test if they have AIR
    or not? And since most will not at this early stage how dow we
    educate end-users to even know if they have it or not?
    </GENERAL AIR COMMENT>
    You should digitally sign your AIR app so it does not say
    Publisher: UNKNOWN with the big red "?" icon!
    I would recommend against using all caps in your messages.
    I would recommend choosing a better font (maybe a pixel font)
    since the message text is a bit blurry.

  • Norton security suite installation

    how long should the security suite installation take?

    That is likely for updating the databases and not for updating Norton components.
    It may take some time to get such updates from Comcast.
    Norton usually provides them for their software within one or two days, but Comcast provides a special branded version and is likely to take longer.
    You can contact them and ask if they have a schedule.

  • F-Secure SAFE installer will not execute (Windows 10)

    I just combated through Windows 10 upgrade from Windows 7 (64bit). However, now after upgrading F-Secure SAFE installer that I downloaded from mysafe-portal, will not execute. It simply appears to be doing nothing. Download looks successful and I re-downloaded the installer as well. What to do? Suggestions?

    Yes, I did reboot  Will the uninstall tool work for Windows 10 as well? It is not mentioned, or I am blind I will try it though.. The story is that I first started Win10 upgrade without removing anything. Then I ended up in a situation where explorer.exe crashed right after login. After some struggling with task manager and command line without being able to fix the crash, I reverted back to Windows 7. While back in Windows 7, I uninstalled F-Secure and some other software I thought might affect and re-upgraded. Then Windows 10 appeared to be working like a charm. Now, back in Windows 10, I installed my Dropbox app and then have been trying to re-install F-Secure SAFE. Thanks for all tips and ideas.

  • 5800 xm v40.0.005 WLAN bug

    Hi,
    Ever since I updated my firmware to v40.0.005 on 5800 XM, my phone automatically connects to the WiFi working in my home. Even after I have turned off all the settings to autodetect WiFi network.. It automatically connects to WiFi network as soon as I disconnect it manually. Earlier(v30 firmware), it used to connect only when I was using some application with WLan usage..
    Its annoying and also draining battery.. I can't switch WiFi router as other devices(laptops, PC) are using it..
    P.S. I installed Image Exchange software in new firmware?
    Kudos, If I Helped !!!
    Solved!
    Go to Solution.

    Your last statement may have provided the answer. Is Image Exchange set to look for a data connection? I have this problem initially with Nimbuzz and a couple of other apps.
    Take a look here:  http://imageexchange.nokia.com/help.jsp#faq_15
    Message Edited by patruns on 19-Jan-2010 03:37 PM
    If I have helped you with your problem in some way, please take a little time and hit the kudos button in my post. Without your feedback, I don't know if I am being helpful or should just be put out to pasture.

  • Nokia 5800 V40.0.005 now available in South Africa

    Just found out that V 40.0.005 is now available for South African Phones (0575950). On my way to download it now - - - Such a long wait!!!
    Nokia 5800 XpressMusic Red V52.0.007
    Hit the Kudos if I helped!

    brennbar67 wrote:
    i also noticed some problem on this new firmware version V40.0.005.
    Problem:
    1) It having difficulty to power up the phone... once it powering up, it will auto shut it down itself. I gotta retries many times only able to power up my phone. For old firmware, I didnt see this kind of problem
    2) when the phone is fully charging, the LCD backlight UNABLE to turn OFF itself. I tried to charging my phone overnight, and when i wake up the next day morning, I can see the LCD backlight still turning ON.. this is something wrong here. For old firmware, I didnt encounter this problem before.
    Nokia, please fix this bugs...
    thanks!
    WE ARE DOOMED! Looks like Nokia does not think the problem we faced is a firmware bug!
    I have email their customer support on this issue and this is the reply I got from them:
    SR# 1-10867639480
    Dear Mr. Wang,
    Thank you for emailing Nokia Careline.
    In response to your inquiry, you can first reboot the phone by turning it off and removing the battery. Wait for around 5 minutes before returning the battery and turning it on. Another option will be to restore the settings by going to Menu > Settings and Phone > Phone mgmt. > Factory settings > Lock Code (default is 12345).
    Alternatively, we suggest for you to make a backup of all important information.
    Kindly refer at the link below for an online guide:
    http://www.nokia.com.my/get-support-and-software/d​ownload-software/nokia-pc-suites/how-to/backup-and​...#
    Once done, you can format the phone.To format the Nokia 5800 Xpress Music, kindly dial the command *#7370# in idle mode > Lock Code (default is 12345).
    You may like to visit our website at www.nokia.com.my for more information and support for your Nokia device. If you have further enquiries, please write to us again or contact Nokia Careline at 1300 881600. We operate between the hours of 8.00am and 8.00pm, seven days a week.
    Kind regards,
    XXX XXX X.
    Nokia Careline
    WHAT SHOULD WE DO NOW???!

  • Nokia 5800 31.0.008 CALL BUG

    Hi!
    Also with this firmware, occasionally, phone crash (freeze and reboot) during a call, when H3G netwok (3 Italy) is missed (0 antenna signal).
    In Italy, when H3G network (HSDPA, UMTS) is unavailable, the operator switch automatically in roaming mode (GPRS TIM).
    Maybe, in the 5800XM OS there's a bug in this switch management.
    A routine to close call, is better then a "crash and restart".
    Thx
    Bye

    i think it's not a bug, but a feature
    this behaviour is there since the first firmware version, but i also like to have text there, it can be small but icons only is not very usefull and there is also space for a small text!
    V21.0.025 » 04-09-2007 » RM-356 5800 XpressMusic » Language pack 01

  • Nokia 5800 V40.0.005

    I have updated my Nokia 5800 to V40.0.005.  It has worked fine however the home screen contacts bar is now a lot larger and i can not fit in all the contacts i wanted.  Is there anyway of making 4 fit accross the screen?
    Solved!
    Go to Solution.

    0575581: RM-356 Country Variant United Kingdom GB - MR
    as meentioned 10000 times before ...
    updating to new firmware depends on product code which represents your region of purchasing, language pack and if it's branded or not .... so NOKIA releases firmwares and release it for every product code depending on mentioned points
    you can check for updates @ :
    http://mea.nokia.com/support/download-software/dev​ice-software-update/can-i-update
    To find what the latest available device software is, you’ll need your device’s product code. The code is printed on the white label beneath the battery (e.g. CODE: 0520001).
    if your phone is branded with an operator, that means that you should go to the operator care center and ask them, not NOKIA
    some updates delay in some countries variant product code, as it requires more effort to add language pack to it like and in some certain countries "example. China Japan Korea" or it needs the country to approve it due to its policy
    -you can show appreciation to my posts if it helped or useful by pressing the green Kudo star beside my post that hepled
    -if my answer was the solution , so click accept as solution button
    Started From Nokia 3310 , Now with Nokia N97 v.22.0.110 + N900 PR1.2

Maybe you are looking for

  • Error opening PDF downloaded from Interactive Report

    hi -- I'm getting an error opening a PDF file downloaded from an interactive report. I've seen on the forum that this could be related to the size of the file, but I've tried this out on 10-row results (1k files) and it's still an issue. I save the f

  • Photoshop CS3 Not showing up in Tools--

    I upgraded Dreamweaver only from CS3 to CS4, of course, it installed Bridge CS4, and I like the interface much better than CS3, I have Photoshop CS3, and want to use the Tools-->Photoshop-->Batch and Web Photo Gallery. but, in Bridge CS4, Photoshop a

  • Call a program in my fronted.

    I need call a program ( test.bat for example) from my ABAP program. I create a destination RFC, in SM59, type T with Start on Front-End Station, but I don't know how to call it. Ana Maria

  • Error in JDBC

    I have got error message by JVM as follow Connection reset by peer: JVM_recv in socket input stream readThere are no recordsjava.sql.SQLException: Connection reset by peer: JVM_recv in socket input stream readProcess Exit... any body can tell when th

  • Reading Error Report

    Hi All, Since a few weeks/months, I have unclear restarts of my MacBook Pro [med. 2010 - 15"] and have some issues to read the report. Therefore I have gathered some error messages and hopefully you can help me out. https://dl.dropboxusercontent.com/