5800 Wlan Connectivity

Hi there all - there may already be an answer to this query somewhere on this forum but I've spent several days trying to get this sorted and its very annoying now
Anywhooo got myself a new phone last week (figured it was time as I had my last one almost 7 years!!) and I've been trying to set up up etc ever since. I'm now at the confused.com point I want to use my phone on the WLAN at home and I've added the service to the phone using the wizard etc however every time it connects its seems to use the futures bright internet and thus I incur download charges, ok they are only a few pence at a time but I don't know why it does this. I've set the phone to ask on connection and I pick the WLAN every time.
Can anyone help me please - fyi this phone has been unlocked and unbranded and is currently using PAYG, don't know if that makes any difference or not but thought I would share

Hey Keat thanks for your comments for now I have acutally removed the Orange Internet icon (as in deleted) because everytime I connect via my WLAN it was also using that connection as well and even tho its only a few Kbs they will add up over the month. I had changed all the priorities and connection yet the Orange Internet connection was still connecting, I was able to see it in the connection Manager even tho WLAN was active. As that didn't work I figured what the heck I'll remove it for now and I can always add it back in later if and when required but it was just so goddam annoying!! I just wondered if anyone else had similar issues and what they had done to stop it happening.

Similar Messages

5800,Wlan connection appears as 'unknown', however...

Hi to everybody!.
I have an issue with wlan connections. I defined a new access point in wireless connections, and I put it into the 'internet' destination. The access point is saved as WLAN_XX, and works perfectly.
As soon as I disconnect it, and click to find wireless connections, something rare happens. When there is high signal, the connection appears as 'known'. However if there is low signal, appears as 'unknown'. Therefore I have to configure it again as a new connection (retyping the wep password),which as a consecuence, is saved as 'WLAN_X01)'.
I updated the firmware from 31.0.101 to 40.0.005. A saved connection always showed as 'known' (even when i had not enough signal to connect) when i used the old firmware (31.0.101). I don´t know if it´s a new feature or a bug or how it´s solved, someone knows? Thanks.

angel_apm wrote:
Hi to everybody!.
I have an issue with wlan connections. I defined a new access point in wireless connections, and I put it into the 'internet' destination. The access point is saved as WLAN_XX, and works perfectly.
As soon as I disconnect it, and click to find wireless connections, something rare happens. When there is high signal, the connection appears as 'known'. However if there is low signal, appears as 'unknown'. Therefore I have to configure it again as a new connection (retyping the wep password),which as a consecuence, is saved as 'WLAN_X01)'.
I updated the firmware from 31.0.101 to 40.0.005. A saved connection always showed as 'known' (even when i had not enough signal to connect) when i used the old firmware (31.0.101). I don´t know if it´s a new feature or a bug or how it´s solved, someone knows? Thanks.
This is normal. You can delete this access point from the settings and re-save it.
If you want to thank someone, just click on the blue star at the bottom of their post

How to close 5800 wlan connection that's "already ...

plz help me with my nokia 5800Xm with this error: WLAN CONNECTION ALREADY ACTIVE, close it and try it again.. what should I do?? HELP ME..
5800xm
version : 21.0.025
where do i disconnect that unknown running WLAN connection
edit: topic added.
Message Edited by vandelay on 11-Aug-2009 11:17 AM

I fixed this problem yesterday it's so simple
1-you need to back up you device
2-remove the memory card
3- switch off the device
4- it's kinda tricky but you need two people to do this press the red,green,camera and power button
if you do it correctly you will feel vibration and then it will start once again .
And there you have it hope this information was useful

5800 wireless connection

5800 is not connecting to the wlan connection

- ABout what you have tried, what wifi accesspoint you got etc...

Multiple WLAN connections

Does anyone know of a way to get my PODCAST and Email applications to use multiple WLAN connections?
I spend most of my day in one of two places, each with a different WLAN, and I'd the phone to have the sense to change WLAN connection as they become available.
Thanks for your time.

Depends, on what your phone is.
If you're using an N97 or a 5800, or anything running on s60v5 for that matter, Go to Menu>Settings>Connectivity>Wireless LAN>Options>Settings>Show WLAN availability. Then you can also set how often it will set to scan for WLAN connections. This would allow the phone to scan for WLAN hotspots around you immediately. Be warned however that this will drain your battery faster.
On an s60v3 phone, I am not very familiar but from what I know its in Menu>Tools>Connectivity>Wireless LAN>Options>Settings>Show WLAn availability.
If you find my post helpful please click the green star on the left under the avatar. Thanks.

C3 wlan connection fail

greetings!! i've bought a brandnew nokia c3. ever since i tried connecting to our wifi at home, i always got a "wlan connection failed" message..i used to have a nokia 5800 and ecerything then worked fine with the wifi connection. what seems to be the problem???

Also had the same issue, just after entering the WiFi (WLAN) security code, I'd get the error message "WLAN connection failed". This was very frustrating, especially as it was a xmas present. The security code was fine as other devices would connect to the WLAN just fine with the same code.
Glad to say this is now fixed but it did involve a firmware upgrade of our Thomson TG585 v8 router, also see http://www.geekzone.co.nz/forums.asp?forumid=66&topicid=68585.
Good luck.

Thinkpad X220: bad wlan connection when docked and lid closed

Dear forum
I use a Lenovo ThinkPad X220. I have no trouble with the wlan connection when i use the notebook alone. The wlan connection is also stable when i use the notebook plugged in the dockingstation with the lid open. But when I use the notebook plugged in the dockingstation with the lid closed my wlan connection drops regularely to about 2 Mbps and gets very unstable.
The ThinkPad uses the Intel Centrino Advanced-N 6205 wlan network controller:
$ lspci | grep 6205
03:00.0 Network controller: Intel Corporation Centrino Advanced-N 6205 [Taylor Peak] (rev 34)
The network controller uses the iwlwifi driver, that comes with the current linux-firmware package:
$ pacman -Ss linux-firmware
core/linux-firmware 20150206.17657c3-1 [Installiert]
Firmware files for Linux
I didn't change any options of the kernel module, everything runs in default mode:
$ modinfo -p iwlwifi
swcrypto:using crypto in software (default 0 [hardware]) (int)
11n_disable:disable 11n functionality, bitmap: 1: full, 2: disable agg TX, 4: disable agg RX, 8 enable agg TX (uint)
amsdu_size_8K:enable 8K amsdu size (default 0) (int)
fw_restart:restart firmware in case of error (default true) (bool)
antenna_coupling:specify antenna coupling in dB (default: 0 dB) (int)
wd_disable:Disable stuck queue watchdog timer 0=system default, 1=disable (default: 1) (int)
nvm_file:NVM file name (charp)
uapsd_disable:disable U-APSD functionality (default: Y) (bool)
bt_coex_active:enable wifi/bt co-exist (default: enable) (bool)
led_mode:0=system default, 1=On(RF On)/Off(RF Off), 2=blinking, 3=Off (default: 0) (int)
power_save:enable WiFi power management (default: disable) (bool)
power_level:default power save level (range from 1 - 5, default: 1) (int)
fw_monitor:firmware monitor - to debug FW (default: false - needs lots of memory) (bool)
At first I thought, the problem could be caused by the KDE power saving settings. I changed the settings, so nothing happens when I close the lid (no hibbernation or screen lock or something like that), but without success (the wlan connection is still unstable under the described circumstances).
Also dmesg shows nothing that points out a problem (as far as I can see):
$ dmesg | grep iwlwifi
[ 19.688522] iwlwifi 0000:03:00.0: can't disable ASPM; OS doesn't have ASPM control
[ 19.688679] iwlwifi 0000:03:00.0: irq 31 for MSI/MSI-X
[ 19.696095] iwlwifi 0000:03:00.0: loaded firmware version 18.168.6.1 op_mode iwldvm
[ 19.718023] iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEBUG disabled
[ 19.718027] iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEBUGFS disabled
[ 19.718028] iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEVICE_TRACING enabled
[ 19.718029] iwlwifi 0000:03:00.0: Detected Intel(R) Centrino(R) Advanced-N 6205 AGN, REV=0xB0
[ 19.718145] iwlwifi 0000:03:00.0: L1 Enabled - LTR Disabled
[ 19.753757] iwlwifi 0000:03:00.0 wlp3s0: renamed from wlan0
[ 20.128443] iwlwifi 0000:03:00.0: L1 Enabled - LTR Disabled
[ 20.128652] iwlwifi 0000:03:00.0: Radio type=0x1-0x2-0x0
[ 20.403905] iwlwifi 0000:03:00.0: L1 Enabled - LTR Disabled
[ 20.404212] iwlwifi 0000:03:00.0: Radio type=0x1-0x2-0x0
[ 68.922975] iwlwifi 0000:03:00.0: L1 Enabled - LTR Disabled
[ 68.923192] iwlwifi 0000:03:00.0: Radio type=0x1-0x2-0x0
So I have no idea where this strange behaviour comes from (only wild guesses: buildfactor, antenna orientation,...).
Any help would be really appreciated.

hmmm...
how about checking both your wired and wireless nic drivers in device manager to make sure that the "allow computer to turn off this device to save power" checkbox on the power management tab is deselected.
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество
Community Resources: Participation Rules • Images in posts • Search (Advanced) • Private Messaging
PM requests for individual support are not answered. If a post solves your issue, please mark it so.
X1C3 Helix X220 X301 X200T T61p T60p Y3P • T520 T420 T510 T400 R400 T61 Y2P Y13
I am not a Lenovo employee.

What is WLAN connectivity, how to use it for inter...

hi all
i have nokia n79, i have know about WLAN connectivity, i mean how to use it. i just check it in my office it shows WLAN network found, i opend it and select start web browsing, then it asked select WLAN network there it already shows hidden WLAN, then i connected it through hidden WLAN then it asked WLAN network name, what is WLAN network name and how to use WLAN network for internet browsing. pls suggest me
thanks/regards
Chandrakant Rajolkar

This will get you started.
http://en.wikipedia.org/wiki/Wireless_LAN
Check your user manual.
http://europe.nokia.com/get-support-and-software/product-support/nokia-n79/guides
‡Thank you for hitting the Blue/Green Star button‡
N8-00 RM 596 V:111.030.0609; E71-1(05) RM 346 V: 500.21.009

N95 WLAN Connection problems - Orange Livebox (UK)

I am trying to get the N95 to connect to the internet wirelessly through Orange Livebox (UK). I have run the WLAN wizard and the phone has identified it. I have input the WEP key and thats worked fine.......except everytime I try to connect to the net via this method I get a connection error. Has anybody else had WLAN connection problems? Can anybody help?

hi,
did you press "1" button at the back of the Livebox before pairing ?
what kind of error message do you get on the N95 ?
does it fail the same way when you go through the homescreen "WiFi scanning / Start Web Browsing" or through Tools / WLAN Wizard ?
Cheers,

Firefox with wlan connect on laptop gives no connect what I need to maake wlan connect, network is ok

have a bought a hp pavilion g series. had trouble with installation and updates. now problem that firefox with wlan has no connection. suse linux 12.1, wireless lan 802.11, FRITZ!Box Fon WLAN 7270, find no setup for wlaan in firefox that over the laptop wlan connection will work

In Firefox 3.6.4 and later the default connection settings have been changed to "Use the system proxy settings".
See "Firefox connection settings" in [[Server not found]]
You can find the connection setting here: Tools > Options > Advanced : Network : Connection
If you do not need to use a proxy to connect to internet then select ''No Proxy''

WRT54GL loses Wlan connection

Hi
I have a problem with an WRT54GL Router. It keeps losing the Wlan connection. Then I have to reboot the router to get it working again.
On some days everything works fine, and the other day I have to reboot every 5 minutes.
I don´t use P2P. So there are not many simultaneous connections. Mostly there are only one or two Wlan Clients active.
Between the Router and the Client is only one Wall. Signal Strenght is at all times above 85%.
Does anyone have an idea what might cause this?

Try upgrading your router's firmware and reconfigure it from the scratch.
Click on this link for the instruction.

Help!!!!!!!! WLAN connection E71

I have a problem with WLAN connection (E71), when I access my wlan, i receive a message saying " WLAN is already active, close it and try again".

Please, have someone any solution?

How to execute "netsh wlan connect SSID", but SSID has space and quotation marks?

Dear all:
I have a wifi roruter with SSID test "3"
But when I execute following command netsh wlan connect "test \"3\""
the netsh reply: 未將設定檔 "test " 指派給指定的介面。
Sorry my windows7 is chinese version, but as you can see, netsh detect my SSID as
test, not test "3".
Does everybody know how to use netsh to connect to a SSID, and these SSID has space and quotation mark both?
Regards,
Joseph

Hi Joseph,
Firstly, please modify your SSID name to make sure it do not contain spaces or special characters. SSID name is the router setting. please go there to change SSID name.
In addition, If only one SSID is specified in the profile, then the specified SSID is used to connect, and the ssid parameter is not required. If the profile specifies multiple SSIDs, the ssid parameter is required.
Therefore, I would like to suggest you run command as this syntax:
netsh wlan conncet ssid=Your SSID of the unsecured wireless network name=Your current profile name
To do this, please refer to the section “connect” in the following document:
Netsh Commands for Wireless Local Area Network (WLAN) Preliminary
http://technet.microsoft.com/en-us/library/cc755301.aspx#bkmk_wlanConn
Karen Hu
TechNet Community Support

Satellite M70: WLAN connection lost

Hello!
I have Satellite M70 and I use integrated Intel WLAN card 2200bg. I have the latest drivers downloaded from Toshiba web site and Asus WLAN router w520g with latest firmware. Connection signal is excellent but sometimes actually very often connection is lost for 5-10 seconds.... I am downloading files all the time so there is no idle time in network traffic.
How can I inspect what is reason for losting connection?
Could authentication method or channel mode be a reason for problems?

Hi!
I updated my driver(latest one from intel website) and problem still exists. But now with Intel Wireless utility I can see error messages when connection goes down. I also opened support case to Intel about this problem. Let's see what they suggest.
I have also tested different kind of variations of configurations (power settings etc.) but no helps!
Now I am testing WLAN connection without authentication and it seems to work ok without connection lost. I will test different kind of authentication methods because i really want to see what authentication causes problems.
One thing I can say more. If I want to see connection break as soon as possible, I have to generete traffic with different kind of p2p programs and I also ping my router (default gateway) with command ping -t -l 1500 same time.

Wlan connection slow

Hi,
since a few days I have big problems with the WLAN-connection of my late 2011 13" Macbook Pro that leads to very slow Intenet Connections and Slow SMB-Server access.
In Detail: If I will open a Webpage it will take 50 times longer then from my iPad or Windows PC; and I run an Windows 2012 Server as an Data Pool, if I will access to any Remote Hard disk the Mac will need 5-10 sec. to load a Folder (the Windows PC loads it directly after the "klick").
Intristingly, If I am connected via LAN (T-based 1000 Mbit Gigabit Ethernet) everything works extremly fast.
Does anybody have a Idea to Solve this Problem? I run Mountain Lion in the latest Version, nothing has changed the System since or before the Error occured.
Thanks....

Yeah there is....
CCX - AironetIe Support.......................... Enabled <-- disable this
DTIM period for 802.11a radio.................... 1<--change to 2
DTIM period for 802.11b radio.................... 1<--change to 2
   Wi-Fi Protected Access (WPA/WPA2)............. Enabled
      WPA (SSN IE)............................... Enabled <-- disable this
         TKIP Cipher............................. Enabled <-- disable this
         AES Cipher.............................. Enabled <-- disable this
      WPA2 (RSN IE).............................. Enabled
         TKIP Cipher............................. Enabled <-- disable this
         AES Cipher.............................. Enabled
      Auth Key Management
         802.1x.................................. Disabled
         PSK..................................... Enabled
         CCKM.................................... Disabled
Swotch configuration should look like this:
description connection to wlc port 1
switchport trunk encapsulation dot1q
switchport trunk native vlan 9
switchport trunk native allowed vlan 9
switchport mode trunk
description connection to wlc port 2
switchport trunk encapsulation dot1q
switchport trunk allowed vlan 99
switchport mode trunk
description connection to wlc port 3
switchport trunk encapsulation dot1q
switchport trunk allowed vlan 103
switchport mode trunk
description connection to wlc port 4
switchport trunk encapsulation dot1q
switchport trunk allowed vlan 102
switchport mode trunk
description connection to wlc port 5
switchport trunk encapsulation dot1q
switchport trunk allowed vlan 100
switchport mode trunk
description connection to wlc port 6
switchport trunk encapsulation dot1q
switchport trunk allowed vlan 101
switchport mode trunk
Thanks,
Scott
Help out other by using the rating system and marking answered questions as "Answered"

5800 Wlan Connectivity

Similar Messages

Maybe you are looking for