5800 XM not vibrating

I bought a used 5800, and yes, it is a old, 2,5 year old phone with latest software, works good. Only problem is that the vibration doesnt work. No matter is it on or off on profiles, it doesnt vibrate. And it doesnt vibrate even when i turn phone on, like my old 5230 did always vibrate when it boots up, my 5800 doesnt. What is wrong, why vibration doesnt work when someone calls or sends message, or not even vibrating in boot up, boots normally, no vibration.. Is the vibration function broken? Does it cost much to fix it?
And my model is 5800d-1, is other models always too 5800d-1, or is my different and if yes, what is difference to other 5800's? This is a 2,5 year old Black and Red 5800. Using 52.0.007 firmware.
Phone: Nokia 5800 and HTC One V
Nokia 2610 --> N70 --> 3120 Classic --> X3 --> 5230 --> 5800 & HTC One V

Back-up all your data and first try a Factory Reset.. (Menu-->Settings-->Phone-->Phone Management-->Factory Restore...)
If the problem remains, try a Soft Reset by dialing *#7370# . This will erase all data from the Phone Memory and you will need to restore it from tha Back-up that you must take before doing it.
In both the above cases the you will have to enter the Security code when prompted. The default code is 12345 unless changed by you.
Also check if the latest Firmware update is available for your device because the latest version is 60.0.003
If nothing works it may be a Hardware issue that needs to be attended by Nokia_Care technician. The exact cost of repairs can be obtained thru' them only.

Similar Messages

  • 5800XM Not Vibrating

    Pretty straight forward but I just realised that my 5800XM is not vibrating at all (and probably hasn't for a while as I can't remember it ever vibrating). Not for calls, messages, feedback or even the Vibrate app from Ovi (downloaded this to check if it vibrated). I have checked all my profile settings, etc. The only thing I haven't done is a reset and I'm loathe to do that if there is a v40 firmware update rumored to be close.
    Any ideas on how to get my vibrate back?

    You can try a soft reset by typing *#7370# at the stand-by screen. But backup your phone memory before you do it.
    If that doesn't help, it could be a hardware issue. Take it to a Nokia Care Point.
    Cheers,
    DeepestBlue
    5800 XpressMusic (Rock Stable) | N73 Music Edition (Never Say Die) | 1108 (Old and faithful)
    If you find any post useful, click on the Green "Kudos" Button on the left to say Thank You...

  • Hi .. My phone has stopped vibrating.I have read the solution given by some users on this forum and have tried all the tricks. But nothing seems to be working. My phone still does not vibrate.please suggest

    Hi .. My phone has stopped vibrating.I have read the solution given by some users on this forum and have tried all the tricks. But nothing seems to be working. My phone still does not vibrate.please suggest.

    Hi .. My phone has stopped vibrating.I have read the solution given by some users on this forum and have tried all the tricks. But nothing seems to be working. My phone still does not vibrate.please suggest.

  • Iphone does not vibrate even after restoring

    as mention in the title, after using my iphone 4 for about 2 weeks, i realise it is not vibrating at all, setting is checked, restoring is tried but still no working. checking other forum talk about ibrate app and it is still not working.

    If you can't find a solution, I would recommend taking it in to the Apple Store so that a person at the Genius Bar can have a look and see if the problem is actually hardware or software.
    You can walk in or make an appointment for a faster method either by calling or going here: www.apple.com/retail

  • How can I change the settings such that the phone does not vibrate when I receive a message in silent mode, but vibrates for calls?

    I'd like the phone to vibrate when I receive a call when it is in silent mode (as it already does) but I'd like it to not vibrate when I receive a text in silent mode. I know how to set both (calls and texts) to not vibrate in silent mode, or choose no vibration for texts when loud or silent, but not what I just mentioned. Thanks.

    Try this - Settings > Sounds > Text Tone > Vibration (at the top) > None.
    Edit - just read the last part of your post closer and I'm not aware of such an option.
    Message was edited by: Allan Sampson

  • Centro Will Not Vibrate

    When does Palm determine that they have a chronic issue and determine that they will not charge to fix it?  I understand that losing the vibrate function entirely on the Centro is not uncommon, yet they either want me to be without my phone for a significant amount of time, or to pay to have a "pre-replacement."
    Post relates to: Centro (Sprint)

    The charges for the Advanced Exchange is for shipping cost. There is a surety hold so we can make sure we get the broken device back. I have setup many of these types of exchanges and not heard back from people getting charged that fee unless they did not turn their device back to us. Even then once we have the device we refund that back to people. Please keep in mind that all devices that has a vibrate function can stop working at anytime. This does not mean there is a defect in the device.
    As to the phone not vibrating check this thread. While this is something I cannot personally condone other users said it worked for them... Please keep in mind that if Palm or other tech support agents find out that if you did what is suggested they may charge a full warranty of the device.
    Post relates to: Treo 800w (Sprint)

  • In my iPad 3 iOS 6 the icons do not vibrate . How I can remove apps. And the ( lock access code ) not exist in setting / general

    In my iPad 3 iOS 6 the icons do not vibrate . How I can remove apps. And the ( lock access code ) not exist in setting / general

    Did you set any restriction?
    Settings>General>Restriction

  • HT4623 phone is not vibrating in silent mode

    I have turned on the option of vibrate on silent in settings but my phone is not vibrating in silent mode

    My iPhone 4 won't vibrate at all on a phone call, whether on ring or silent. It does vibrate on alerts and alarms. Is there something I'm missing?

  • HT201401 My phone will not vibrate

    My iPhone will not vibrate

    for iOS 7.0.4
    First Check that in the "Sounds Menu"   Vibrate on Ring  and   Vibrate on Silent     is    On.
    If your iphone still not Vibrating
    Open,   Settings -> Sounds -> RingTone  -> Vibration  and check that Vibration is not off.
    I hope this solve the problem...

  • My phone will not vibrate when I switch to vibrate

    My iphone does not vibrate when turned to vibrate. How do I rectify that?

    For IOS 7.0.6 and IPhones 5S
    I spoke with a  Tier 3 Apple Tech yesterday..
    I  followed her instructions and did the same on all three of my IPhone 5S  phones.  The problem was immediately resovled and fixed on all of  them.   It has not recurred.
    That side button, above the volume controls must be showing orange.
    In SETTINGS:
    1. Go to Sound,
    2. Under VIBRATE - make your choices on whether you want to "Vibrate on Ring"  and/or "Vibrate on Silent."
    3. Go to RINGER and ALERTS (right under VIBRATE).
    4. Under CHANGE WITH BUTTONS - make sure you're showing the green part of the slider.
    Then as long as you have a ringer tone and a vibrate tone selected, exit out of there.
    If  your phone's side button (the "silence" button) is showing orange, you  should have no problems and everything working as you want, just as I  did.
    If  your phone's side button (the "silence" button) is not in the orange  postion, your status quo before all of the above should remain in  effect.
    Again, this "silence" button is directly above the volume buttons on an IPhone 5S. 
    Hope this helps.

  • Nokia 6500Classic will not Vibrate!

    I have a Nokia 6500 Classic which will not vibrate.
    Now after trying several things including software upgrade etc. I took it to a Nokia partner.
    They kept the phone for almost a month, ssying it was sent back to Nokia because they couldn't solve the problem themselves.
    Today I got the "repaired" phone back, just to realize that it won't vibrate still! The only thing different is the downgraded firmware.
    I don't understand what happenned! Can somebody please help me? I really don't want to stay another month without my mobile just to get it back as I sent it!

    i find with my 6500classy that EVEN on vibrate, the message tone still sounds beep beep, which is REALLY annoying.
    why mobiles have to be sooooo noisy.
    spoke to t mobile and i might as well have asked the postman for advice.
    try contacting nokia, but it's all suuuuch hard work.
    i just want a simple phone with good battery life.
    why couldn't they just update the 6310i a bit and have done with it?
    MS

  • My phone will not vibrate and has no sound to it. Therefore I can't listen to music or videos.

    my phone will not vibrate and has no sound to it. therefore I can't listen to music or videos. I've tried turning it off and back on and still nothing.

    did you use the mute switch in the side?

  • IPhone5 will not vibrate on silent when using custom ringtone from iTunes sync

    Hello,
    I've troubleshot this one to death and came to find that my iPhone5 will not vibrate in silent mode when the audible tone is set to a tone synced to the device from iTunes.
    I've found that the phone DOES vibrate on silent when the audible ringtone is set to a tone that comes with the Phone out of the box.
    Any advice on how to rectify this would be greatly appreciated.
    Thanks,
    DP

    I have this same issue, I havent been able to sync my phone since May 15th.  I am using Itunes 11.0.3 and I have an Iphone 5.  I reset my phone and deleted Itunes and reset sync history, all of which didnt work.  I have already turned in my Macbook pro because of its buggy ways and I am thinkin I am going to have to leave the iphone if this doesnt get fixed.  "Itunes was unable to load data class information from sync services.  Please try again later.  I have also removed norton and that didnt fix it.  Apple is such a dispapointment anymore. I used to reccomend them but now I tell people to stay away.
    Its driving me nuts, I was wondering how you fixed this.
    Thank you

  • Phone will not vibrate and all my settings are correct.

    Phone will not vibrate and all my settings are correct.

    If you're sure Settings are correct then do a reset (Hold Sleep/Wake and Home buttons about 10 secs or more till Apple logo appears)
    Note: You will not lose any data.

  • Phone will not vibrate?

    My phone will not vibrate. Is there something I can so to make it vibrate? I have tried everything on the phone to make it vibrate but it will not. Any help is appreicated.

    Good Afternoon gdfkjf,
    That must be frustrating! I would like to ask you some probing questions and offer some recommendations.
    How long has the problem been happening?
    Is it occurring with calls, messages, e-mails or alerts?
    Have you tried a soft reset by removing the battery?
    Is your software up to date? The latest version is: i500.EH03
    I have included additional links below to assist you.
    goo.gl/yqafL
    Sincerely,
      JonathanK_VZW
    VZW Support
    Follow Us on Twitter@VZWSupport

Maybe you are looking for

  • After security updates on Windows 2008 R2 ping returns ipv6 ip addresses

    After installing the updates shown on screenshot attached the server running windows 2008 r2 returns IPv6 ip addresses when pinging any device. Also Public Folder got populated with many icons that were not there. This is a server running terminal an

  • Install Flash Payer 9 error message

    Hi, When I try to install Flash Player 9 for OSX I get the following error message: "It appears that a browser is still running on your system. Please close all browsers and click 'Continue'" I do not have any browsers running, and have tried restart

  • ERROR CODE -1 was returned by the CoreAudio driver? help!!

    Just been using my Mac and noticed that i get this crash : "ERROR CODE -1 was returned by the CoreAudio driver" The it says "The application logic Pro quit unexpectedly" ? Am running Logic pro 7.1.1 on a 2Gb G5 2.3 Dual Core Mac with a MOTU 828mk2 -

  • Dynamic Linkage between 2 Numbers documents

    I currently have a numbers document and i was to import information from another table in another numbers document, either automatically or using some kind of macro. I know this is possible with the PULL fuction in excel but i dont know if this is po

  • Contributing packages.

    Hi all, just a short note for contributing packages to arch linux. i was browsing through the incoming directory today at ftp.archlinux.org and noticed an over abundance of regular packages in there. while there is generally no problem with this it p