5800 xm problems in 30v of firmware........

Problems i felt in 30v of firmware..
1. After putting headphone the screeen vibration stops working.
2. In text message smilies are not provided.
3. 4 keys keep glowing when I watch a movie that is a bit irritating.
4. Sometimes applications disappear from the applications folder and never comes back even after reinstallation or restarting
5. Sometimes contacts on SIM doesnt appear but they comes after a restarts ....very irritating!!!!!
6. MOST IRRITATING...the music player -sometime it keeps on showing adding media files and reains on' 0 files added' untill we hit stop.
7. In media player sometime it doesnt play the mp3 files which it was able to play half n before.and stop recognizing them.

That should be Vodafone UK Blue which is great as won't be crippled by network firmware variant.
OVI Maps application uses Internet destination by default, but to work as it should the Assisted GPS feature (found in Menu > Applications > Location > Positioning > Positioning server > Positioning server use) also requires network access point.
Want you to go to Menu > Settings > Connectivity > Destinations > Internet - what is Priority 1?
Do you have any connections listed in "Uncategorised"?
You might find this thread useful go to #10
http://www.allaboutsymbian.com/forum/showthread.php?t=72724
Happy to have helped forum with a Support Ratio = 42.5

Similar Messages

  • 5800 language problem

    assalam alaykom
    about 2 days ago when I was connected my 5800 XM
    to OVI
    he told me I can update software
    and I do that immediately
    and change from v 51
    to v52.0.101
    the problem is the phone don't have Arabic language ( writing only)
    I can read Arabic but can't write Arabic
    how I can fix this problem

    If the problem appeared after the firmware update.. in all probability the phone was not intended to be sold in your region.. but the retailer added the language pack and sold it in your area for his personal gains.. Though you may try going to the retailer and explain the situation to help you out..( should be a Free of cost install...)..if that can not be of help, then the ONLY solution is to visit Nokia Care and get the language pack installed. It may cost you a little..but be warned that any future firmware upgrade..(.. IF and when available..) will again result in the language missing that will again need to be installed...

  • 5800 Wifi Problems

    I know this has been mentioned a few times - but reading them does not help me:
    I have a wifi network set up at home on a Netgear Router.  I have a few things connected to it via wifi and not had any problems.
    My network is set up with a hidden SSID, mac address filtering and defined IP addresses for all the mac addresses so when each device is attached it always gets the same IP address.
    I have entered the mac address of my 5800 no problems there:  However,  when I try and connect the 5800 to the internet through my wifi I get nothing.
    I have tried using the wireless wizard which says the connection is made, my password is correct - but I just cannot connect to the internet through my wifi?
    Any suggestions?  My phone has the latest firmware - just cannot get a wifi connection at home

    If the MAC Address is showing in the list of connected devices, then I suspect that it is not a problem with the MAC filtering.
    With regards to DHCP, this is the system that allocates an IP address (and other information) to devices connecting to your network. Check on your wireless router settings, there should be something that says DHCP is enabled or not. If DHCP is not enabled, then your device will not be able to acess anything on the network without manually entering the IP information.
    If DHCP is not enabled, try to enable it and see what happens then.
    Dave -
    Phones:3110,5110,6110,6210,6310,6310i,8210,8250,8310,6230,6230i,6280,E60,E65, 5800, N900
    and: 7110,6250,6220,6111,7370 (but just for a few months)

  • N96-Problem in Camera after Firmware Update with 2...

    Dear
    I update my Nokia N96 firmware to 20.050 and i face problem in the Camera that after taking a photo the image processing page came then the phone hang up and restart.
    i reinstall the firmware two times and same problem remain and i can't use the camera because of this problem.
    the other functions like video and second camera still working.
    i try many things like changing the place of storage, camera resoluation and still same problem.
    the use same firmware files to update my fiend mobile N96 and he don't have this problem.
    i don't know what the soluation actually i dont want to send it to the repair center as their soluation always to formate the mobile and i have many data i dont want to backup it.

    Sorry mate but the next step after fiddling with the settings is a reset
    Firstly try just a factory reset, if this doesn't work then back up and go for the full 3 finger

  • 5800 alarm problem

    My phone has a problem with the alarm, it doesn't ring at the right time, sometime 2 min. late, sometime 15 min. late & sometime even 30 min. late.
    I have upgraded the firmware of my phone from v21 to v31 formatted the memory card & the hard reset the phone before update & after update.
    It was working properly before the firmware update, is this a problem in the new firmware, if so it needs to be fixed as soon as possible, cause I depend on my mobiles alarm to wake up fro office (currently using my wife phone fro that purpose)

    The point is to change it and put something else there. Altering the snooze time has been known to put things like this right.
    FWIW, I never had problems like this on V21 but I'm now plagued with them on V30 and then V31. The alarm goes off at the wrong time, the phone exits timed profiles late if at all, and scheduled backups happen only randomly. The firmware is buggy, there's no denying that.
    Was this post helpful? If so, please click on the white "Kudos!" star below. Thank you!

  • Problem after upgrading New Firmware 14.1.G.1.534. Asking for Password when i click settings menu

    Problem after upgrading New Firmware 14.1.G.1.534. Asking for Password when i click settings menu, for which i never kept any password. 
    Any DEFAULT Password so that i can unlock the settings menu.

    That's quite odd, just repeat the update process
    Update Service (SUS)
    http://www.sonymobile.com/gb/tools/update-service/
    http://www-support-downloads.sonymobile.com/Software%20Downloads/Update_Service_Setup-2.11.12.5.exe
    PC Companion (PCC)
    Bridge (for Mac)
    Alternatives on How to backup Xperias
    http://talk.sonymobile.com/thread/36355
    "I'd rather be hated for who I am, than loved for who I am not." Kurt Cobain (1967-1994)

  • Nokia 5800 Screen Problems After Firmware Update V...

    Hi all,
    I have the Nokia 5800 navigation edition. I just updated the firmwareon it from V40. to the latest available 51.2.007. Doing so has turned the phone's screen into a huge mess - the lower half of the screen is all white and the upper half has some weired flickering and the icons(the ones that are visible) are all messed up too and some of them are not responding at all.
    Heres what I've done to resolve the problem:
    - remove the battery, memory and sim cards for a few hours.
    - reboot the phone without the memory card(eliminating any corrupt setup files).
    - reinstalled the V51.2.007 update several times using bothe the Ovi Suite and the older Nokia PC Suite updater.
    - tried running the updates on all XP, Vista and Windows 7.
    Can you please advise me of any other possible solutions I can try. Is there any way to revert back to the older firmware. The phone was working just fine before the update.
    Thank you all for your help.

    There is another way to hard reset your phone and it is as follows.
    With your phone powered off, press and hold Green  + Red + Camera Keys. Then power on phone using the on/off button whilst keeping the three keys depressed until you see the Nokia Shaking Hands Logo.
    Always remember to backup your phone before performing resets as your data may be lost.
    This reset will revert the phone to its out of the box state, so it will revert back to the original version of Maps that came with the phone. However, this should be an issue as you can easily redownload and reinstall the latest again.

  • 5800 alarm problems with v40 firmware

    After doing the update to v40 my alarm does not work properly (on both my 5800's), when the alarm goes off and the stupid orange and red bars come up saying snooz and stop they do nothing ! I hit them and the alarm just keeps going and going, I have to hit the red menu button and it goes to snooz mode, is there a way to revert back to v31 as I really do not like this newer v40 firmware.

    You have got to be kidding me. Everybody else was complaining about the keyboard not switching to full qwerty when rotated now you are complaining why it does that. Its not dumb, its called market request. And I like it better actually. I hate the landscape alphanumeric, and I know a lot would agree with me. Its not intuitive enough, the lansdscape alphanumeric.
    The connecting to wireless network is probably due to a messaging application your wife has on the phone. Its a normal thing since messaging applications like that do that since they are meant to be always connected to the web. 
    If you find my post helpful please click the green star on the left under the avatar. Thanks.

  • 5800 key lock problem during phone calls - firmwar...

    See previous post that is marked as solved, but is not solved in my case.
    I am using Mail for Exchange, my company forces the phone to lock after 10 minutes of idle time.
    When I get a phonecall when the phone is locked, there is no way that you can have access tto normal phonecall functions as <Mute> and <Speaker> during a phonecall. And you can not unlock without breaking the call..
    Yes when you receive a call ther is a green <answer> and a blue <unlock> slider. Howvever when swipng the <unlock> you can only choose between <answer> and <reject> and there is [Option] that gives you access to <answer> or <reject> aswell.
    In other words no access to phone functions, No way you can activate the speaker on the phone when you were called while the phone was locked. This is quite useless and in my opinion a design flaw. 
    NOKIA HELP ---- NOKIA HELP ----- NOKIA HELP ----- NOKIA HELP ----- NOKIA HELP ----- NOKIA HELP ----- NOKIA HELP ----- NOKIA HELP ----- NOKIA HELP ----- NOKIA HELP ----- NOKIA HELP ----- NOKIA HELP ----- NOKIA HELP ----- NOKIA HELP ----- NOKIA HELP ----
    .NOKIA HELP ----

    whats stupid that your company has locked the phone in some way?
    back up your data and reformatt the phone if you wish this should remove the lock (where ever they got it from we would like to know)
    this will take your phone back to out of box condition
    try these code below
    . *#7780# - Restore factory settings - resets all the settings to the default ( you will not lose any data)
    Make sure you back up your data as you will lose all of it when you perform option 2 or 3 on this list. The default code for all operations listed here is 12345
    2. *#7370# - Reformat your phone
    3. This you perform as a last resort. Nothing else is working.If the phone is not showing any activity, proceed with hard formatting , turn off your phone, hold the following buttons while pressing the power button. (the default code is 12345)
    hard reset - hold the following buttons *, 3 (number button) and talk/green key. turn on the phone and do not release those buttons until you see the Nokia boot up screen. once you feel the phone power up you can let go off the power button while still holding all three buttons ( for Nokia 5800XM - use the following buttons to do a hard reset, GREEN/RED/CAMERA keys pressed all at once on power up. this will only work on 5800's that have firmware version 20... and up. )
    If  i have helped at all a click on the white star below would be nice thanks.
    Now using the Lumia 1520

  • Nokia 5800 XM: Problems after firmware upgrade

    Hello all,
    I upgraded my firmware to V 50.0.005, cause that's what Ovi store told me to do in order to download ovi maps.
    However, now, when I open my internet browser it automatically opens full screen which is really not my preference. But when I click "options" it just shuts down.
    Also when I enter Ovi store now, at first it seems fine but after loading an app page it crashes saying no more than "Something went wrong".
    Thanks in advance for your help.

    Hello, I'm afraid I don't have an anser to this, but I too appear to have the same problem. After upgrading to v 50.0.005 I get the following problems relating to web browsing. 1. If I attempt to download anything I get the following error :- Script alert: A critical internal service has failed. after which I click on OK and the browser/application shuts down (and the connection closes). This happens when web browsing e.g. when attempting to download a BBC podcast or using the Ovi Store application to download something. Also it happens whether I'm using my provider's 3G network or a wireless network. 2. If in the browser I click on "options" the browser shuts down. I admit that in order to get Ovi Maps I have previously debranded my phone in order to get the necessary firmware updates, but I haven't had this problem with any of the previous ones. FWIW the Ovi Maps application appears to work well and manage to keep the internet connection up for a long period when online. Does anyone else have this problem? Can anyone suggest anything or will we simply have to hape that the next firmware update comes quickly and cures the problem? Thanks in advance.

  • Problem with Flash Lite in Nokia 5800 XpressMusic-Problema con Flash Lite en Nokia 5800 XpressMusic

    I've got a problem playing videos in YouTube with my 5800. Recently I updated my version of Flash Lite to 3.1,  from that day I can't see correctly videos on YouTube, when the the indicator of the bar reaches 1/4 of the totallity of the bar, the sound and image stop, but the indicator continues playing. If i want to see completly a video I have to put the indicator in the start of the bar and wait the load again. Some idea to fix this problem?
    Sorry for my English level.
    Tengo un problema reproduciendo vídeos en YouTube con mi 5800. Hace poco actualicé la versión del Flash Lite a la 3.1 y desde entonces no puedo ver correctamente vídeos de YouTube, cuando el indicador de la barra alcanza 1/4 de la distancia total, se detienen el sonido y la imagen, pero el indicador continúa como si siguiera reproduciendo, es decir para el vídeo es como si siguiera reproduciendo pero ni el sonido ni la imagen continúan., para ver los vídeos tengo que llevar el cursor de carga al principio y esperar la carga de nuevo, es un problema realmente molesto. ¿Alguna idea para solucionarlo?

    Hi,
    I have Nokia 5800XM as well. The YouTube videos are playng fine for me. my FW is 40.0.005 with FL3.1
    Maybe you need to update your device's firmware and FL version.\
    Start Device Manager application on your 5800XM from menu or dialing *#0000#. It will check for new updates and ask you to download them. Remember that these updates are in MBs. I'd recommend update using a WiFi connection or flat-rate data plan.
    Best,
    // chall3ng3r //

  • 5800 XM Photo Gallery Crash ? Firmware suggession ...

    Hello , in my 5800 XM. The photo Gallery crashes every time in loading thumbnails when browsing. I got more than 100 pics and it keeps crashing when scrolling.
    Plz tell me if its the latest firmware ( v52.0.07 ) or its my 2 GB external memory or phone's memory?
    If it is the firmware problem, Plz fix it and release a stable firmware soon with improvements aspected like home screen widgets and bugs fixed like white box in menus.
    If it is the memory than optimize it too, i've also tried a custom firmware and photo gallery was much smooth.
    Click on Green Star ! if i solved your solution.

    Don't think it's firmware otherwise there would be a whole heap of users with the same problem. I'd suggest tranfering all of the pics to your PC, checkdisk your MMC and then transfer it all back to your MMC to see if that has fixed it.
    If not, you'd probably have to go the hard reset option. Sorry.

  • Nokia express 5800 bluetooth problem

    hi all
    my problem with my nokia 5800 express music is when i try to open the bluetooth it gives me a error message which says unable to preform blutooth operation and before it was already working , and i already upgraded the new version as try that it may work but still also the same and after the new software update i already made a hard reset and still the same problem so any idea what that could be ????

    musiker wrote:
    Hey, I have the same problem including that FM radio does not work. ANYONE WHO KNOWS?
    THANX
    If you have also tried the Firmware update / re-install and the Reset mentioned by
    senior2007 without success, most probably its a Hardware failure that need s to be addressed by Nokia care ... 

  • 5800 radio problem

    i have firmware 40.0.005 installed on my 5800. While playing radio all of a sudden radio stops responding. I can kill the radio application but have to restart the phone everytime. Otherwise radio doesnot work. I have tried different headphones but the problem is not solved
    Solved!
    Go to Solution.

    I found a funny solution for this. But ıt is working. Thisis the things what I did:
    Restart my 5800.
    Open Bluetooth.
    Connect to the Nokia suit.
    After that open my radio on 5800.
    Setup the frequency to the radio which ı know have RDS. POWER FM 102.95
    and it worked. 
    My radio still running with RDS and no problem with phone.
    I know it is not best way but now we just have this. Also this mean this radio problem is software based and I think nokia has the solution but waiting.  For what???
    ! Photos from working RDS Radio And  freeze Radio.
    Attachments:
    5800 Radio with RDS by bfirat.JPG ‏2327 KB
    5800 Radio with RDS.JPG ‏2623 KB

  • 5800 touch problem

    got he same prob ... plz help ..
    Re: Nokia 5800 xpress music firmware update 60.0.003 (posted by :ivanmigNew Member)
    ‎2011-12-30 22:15
    Hi,
    I have quite a similar problem with the same phone. Whenever I receive a call, the touchscreen does not function, I have to answer the phone by pressing the green button. Thus I do not have the option to make the call silent. This happens both when the phone is locked (slide option) and also when it is not locked (tapping option). This happened a few days ago. I updated the phone yesterday with the latest software V 60.0.003 thought maybe this could be fixed but I still have the same problem. This also happens with the phone alarm. I cannot turn it off or put it on snooze with the slide function. A week ago I had to dismantle the phone to replace the touch screen as it was all scratched. Everything worked perfectly fine. A few days later the slide function to answer call and to turn off the alarm  stopped working.
    Any help on this please?
    Thanks in advance

    Can't say much since the phone was self servised.. but just to silence the call why not use the Flip to Silence feature ? Go to Menu-->Settings-->Phone-->Sensor settings-->..set Sensors to ON and select 'Silencing Calls' under Turning control .. Now when a call is received, to silence it simply flip the phone upside down ..(turn it so that display faces downwards..and the back faces up)

Maybe you are looking for

  • Problem in setting background Image to TabedPane.

    Hi Pals, I created a JFrame which consist of some components. The structure of the added components are given below. 1) I added a JPanel (MainPanel) with background image in a JFrame. 2) I added a JTabbedPane with 7 tabs in the previous JPanel (MainP

  • Where can I find a hardcase for my aluminum macbook (not the Pro, the original aluminum) ?

    I have the aluminum 13 inch macbook that was only sold for less than a year starting in late 2008 i believe, i need a new case but all of the new cases are just slightly too big. I have no idea where to even look for a new one or what to even title m

  • How do I send a page via email in the body of the mail and not as an attachment?

    I wish to send a page via email in the body of the mail. The only option to send a page appears to be to save it first and then attatch to the mail.

  • External Mic is not working on Line in?

    Problem: I attached a non-powered microphone to my MBP Line-in port to record some voice overs. But the system doesn't record my voice. Only from built-in mic. What I've tried so far: Check input settings in Sys Prefs, and Utilities > Audio Setup che

  • Cut in the header???

    Thought I would post this here as well. This is probably a silly Q but when I export a sequence from FCP into a QT movie, all self contained, I get this little header at the top of the movie that says CUT just after the first scene change and stays t