5800 XM - very slow and hangs

For no apparent reason my 5800XM froze and I had to remove the battery to restart. After that it has been working but has become very slow, you can see the different applications open and close and a little "button" goes red or green and flashing for a few seconds before applications open or close. Sometimes it hangs, especially after incoming calls, but can be restarted by the powerbutton. At other times the buttons in the touchscreen hangs when I press them, producing gazillions of the same letter or number in the screen.
I tried to check for my firmware (?) version by dialing *#0000#, but I get an error message, so I don't know my version.
Can anyone help?

It's not about having much on your card or not.
I've seen it happen a few times with the 5800 and other models where a slightly corrupt memory card will cause the phone to run very slowly.  The solution to that is to format or replace the card.
If you are certain that the card isn't the cause try these codes.  If the first one doesn't help it try the second.  You enter them like dialing a phone number.  Be sure to back up anything you want to keep as the second code will fully reset the phone and remove all of your data from the phones memory.
Reset to factory defaults (*#7780#) : Restores settings but preserves user data (photos, 3rd party apps etc)
Reset (*#7370#) : This reformats completely the C: drive. All applications and files stored on this drive will be lost and clean default files will be rewritten.
Message Edited by psychomania on 06-May-2009 02:43 PM

Similar Messages

  • Since upgradation of my i phone 4 to ios7, it has become very slow and hangs frequently.. why!!!!!

    since upgradation of my i phone 4 to ios7, it has become very slow and hangs frequently. before upgrade, we  were not aware that ios7 is not appropriate for iphone 4. more than 50% memory available ,still slow. getting slower. why?

    See this discussion...
    https://discussions.apple.com/message/23731048#23731048

  • IPhoto 11 very slow and hangs up the computer continuously

    iPhoto 11 loaded fine and transferred all my photos. It hangs up a lot when being used. Sometime for 10 or 15 seconds. I ran Disk Utility to repait any permission issues. Still have the same problems. Sometimes it not only locks up iPhoto in a loop, but the whole computer. I normally comes out of the loop, but it is a pain. Anyone else having this issue with iPhoto 11, upgrading from last iPhoto?

    This performance issue, slow and locking, seems to affect Mac Pro users more than other desktop or laptop users. Wondering if it could be a graphic card issue (my thinking) since Mac Pros had a graphic card problem earlier. Try rebuilding the library with just Options #1 and #6. If that doesn't help try again with #1 and #2.
    Is your library on your boot drive? How much free space on your boot drive (with a Mac Pro I've thinking this is not a problem but have to ask)?
    Do you have a backup of your iPHoto 09 library? If so keep it safe.
    OT

  • Oracle database is very slow and hangs sometime

    I am using Oracle 11g on Red hat 5.2 . My RAM is of 6 GB and swap size is 12GB . When I checked the used RAM and Swap area by using $ free -m command it shows that enough free memory (almost 4990 GB and swap space (more than 10GB) is available to use. Then I checked an alert.log file as my database was hanged . It contains error like
    1. audit commit delay exceeded oracle
    2. unable to spawn jobq slave process oracle
    3. maximum number of sessions exceeded
    4. could not allocate new resource
    My init.ora contains following parameters.
    Processes =150
    Sessions= 248
    Transactions = 220
    memory_target = 2400m
    sga_max_size = 1500m
    sga_target = 0m
    So, what steps i should take to stop database hanging and how can i boost slow performance ? Is there any problem with my resource manager and if so then how can i correct it?
    Thanks
    Tushar Lapani

    Hi,
    Please check the query
    SELECT username,default_tablespace from dba_users;
    Ususally the default tablespace of the user should not be in SYSTEM tablespace. This might cause performance issue. Create a seperate tablespace and alter/assign this user. Also must move all the objects from SYSTEM tablespace to this new tablespace which you created.
    For complete details, you can refer the document http://docs.oracle.com/cd/B14117_01/server.101/b10752.pdf

  • Firefox (3.6.10) is very sluggish/slow and hangs up

    All of a sudden Firefox (3.6.10) is very sluggish/slow and hangs up
    I've been using Firefox (very actively) for over a year now and all of a sudden (yesterday) it began to act very sluggishly. On sites I have always visited frequently it hangs up for periods of 15-90 seconds or more, won't scroll down, won't open hot links, slowly opens new tabs ...
    I rebooted my PC (multiple times), powered down my modem and router, ran a Norton disk optimization - essentially making sure it was not an outside factor effecting Firefox's performance. (Note: I am using a cable connection.)
    I then ran a side by side speed comparison with Internet explorer (on my 2nd monitor) going to the same web sites, and IE had no problems/hang-ups.
    FYI I only have a couple of add ins/extensions (Java, Microsoft Framework, Norton, No Squint, & RealPlayer) and none of those are new within the past few weeks at least.
    Any ideas on what could be causing this? How to fix? (As I much prefer Firefox to any Microsoft product.)
    Thanks.

    Yes, FF gets sluggish from time to time. Sorry but it's the fact! FF also cannot render some websites properly (especially v3.6.10). I'm a big fan of all Mozilla software but FF 3.6.10 makes me very disappointed.

  • Mountain lion download is very slow and in-between it hangs of and starts from beginning. Is there a solution i have already purchased it can i download a torrent and authorize it

    Mountain lion download is very slow and in-between it hangs of and starts from beginning. Is there a solution I have already purchased it can I download a torrent and authorize it. Somebody pl. Help

    Exactly. Some of us don't understand the situation in India. This is a country with sickest internet speeds. The internet segment is dominated by fraudulant companies. There is no consistency that is why most of the data transfer here is through Pen drives and torrent websites. We have never seen a good downlooad speed here. And on the top of inconsistency lies the Mac book Air without a built in RJ45 port.
    If i have to do it in an internet cafe it will cost me more time and money than to purchase a Mac book air itself. Apple should start giving us software loaded flash drives at least at premium.

  • I have upgraded my I phone's ios from ios 6.1.4 to ios 7. After that my phone is very slow and getting hang. So now I wants to downgrade from ios 7 to ios 6.1.4. Please let me know how I can do it

    Subject: need to downgrade ios
    I have upgraded my I phone's ios from ios 6.1.4 to ios 7. After that my phone is very slow and getting hang. So now I wants to downgrade from ios 7 to ios 6.1.4. Please let me know how I can do it

    You cannot downgrade.

  • My multi touch is very slow and it hang what can I do?

    My multi touch is very slow and it hangs
    What can I do?

    Try the standard fixes:
    - Reset. Nothing is lost
    Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Restore from backup
    - Restore to factory defaults/new iPod

  • The browers (FireFox, IE) too slow and hang when load Spanish language many

    Hello There,
    I am using the STRUTS Framework 1.1 for developing web application.
    My objects:
    Buyer{
    String scompanyName;
    String scompanyAddress;
    Supplier{
    String ssupplierName;
    String ssupplierAddress;
    I created 2 ArrayList Buyer and Supplier and put them to the ComBox. One Buyer has many Supplier when you select any Buyer....
    If you select Supplier then the sub info of this Supplier will be displayed in below. As this action, I have selected many many Supplier for see sub info (Address, Employee...) many time.
    When the action submit to Server then I see the Buyer info also change when display because Company Name and Company Address are the Spanish language.
    Origin info:
    Name : ABC Espa�a S.A.
    Address: Carretera de LHospitalet, n� 11, Nave 1, 08940 Cornell� de Llobregat (Barcelona)
    First time:+
    Buyer:
    Name : ABC Espa��a S.A.
    Address: Carretera de LHospitalet, n�� 11, Nave 1, 08940 Cornell�� de Llobregat (Barcelona)
    Second Time:
    Name : ABC Espa�ƒ��a S.A.S.A.
    Address: Carretera de LHospitalet, n�‚�� 11, Nave 1, 08940 Cornell�ƒ�� de Llobregat (Barcelona)
    We have 2 string very long in results when I select many many time and browser too slow and hang if the are to long. That problem only happen with the Spanish language, in other languages are not, It works good.
    Please help me to solve these above problems, I have tried to add code in JSP page
    <meta http-equiv="Content-Type" content="text/html; charset =ISO-8859-1"> or <meta http-equiv="Content-Type" content="text/html; charset =UTF-8">
    But it also hang the browser.
    Thanks a lot,
    Vu Nguyen

    Well... Are you sure that the problem is within the browser? If both browser hang, then check if your OS supports the language the right way. Also, your browsers my have plugins/addons for supporting other languages. Try to look for them or/and post your systems-names here to help others helping you =).
    X--spYro--X

  • V10 is slow and hangs, how do I downgrade to v9 to get a working browser again?

    I have just had the automatic upgrade install v10 of Firefox. It is now very slow, often hangs for long periods at 100% CPU, cannot be interrupted. I cannot click on buttons or links for 10s of seconds after a page load. It is now basically a non-interactive application.

    Opt in for sending data to firefox, the data is anonymous and helps developers looking at such problems. If you also use the about:telemetry option from the add-on [https://addons.mozilla.org/en-US/firefox/addon/abouttelemetry/] then you see a graphical representation of that data it may be of use if some knowledgeable person is to assist with the troubleshooting.
    I do not have the specialised knowledge, although I may be interested in the results, but will probably not be online much now until next week.
    You may also need to consider memory usage & amount of RAM and page file use.
    One of the problems Firefox 10.0.1 is addressing is hangs, possibly hangs related to java use, so that upgrade may help.
    The data sending option may not be fully and openly documented at the moment but use, I think:
    * Firefox Button -> Options -> | Advanced | -> | General | system defaults
    * see [[options window - advanced panel]]
    If you make a habit of deleting and therefore rebuilding the places.sqlite database at least take the precaution of manually backing up your bookmarks before doing that
    * see [[backing up and restoring bookmarks]]
    * you may also be interested in [[what is firefox sync]], but take care with that, there may have been some recent teething troubles with a change,and it is intended to copy & synchronise NOT be a foolproof backup system

  • I don't want to stay with iOS 7 any more, i can't tolerate it to being very slow and to hand while playing games, it doesn't run properly, i have no games in my phone right now becouse of that bug, could i downgrade my ios of iphone 4s? Please help thanx

    I don't want to stay with iOS 7 any more, i can't tolerate it to being very slow and to hand while playing games, it doesn't run properly, i have no games in my phone right now becouse of that bug, could i downgrade my ios of iphone 4s? Please help thanx

    That is HANG sorry miss type

  • All of a sudden Firefox is so slow and hanging

    Could someone help me the last few days my firefox has been running so slow and hanging up I uninstalled and reinstalled but still doing it its so slow that I can run like 5 windows in ie with no probs but not even one in firefox I even uninstalled and reinstalled and no luck
    == This happened ==
    Every time Firefox opened
    == a few days ago ==
    == User Agent ==
    Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 6.1; WOW64; Trident/4.0; Mozilla/4.0 (compatible; MSIE 6.0; Windows NT 5.1; SV1) ; SLCC2; .NET CLR 2.0.50727; .NET CLR 3.5.30729; .NET CLR 3.0.30729; Media Center PC 6.0; MDDC)

    Hello Amy.
    This kind of issues are, unfortunately, more common and the we'd like. Thankfully, 99% of the cases are very easy to solve. However, you do need to diagnose what your exact problem is. Do this:
    #run Firefox in [http://support.mozilla.com/en-US/kb/Safe+Mode safe-mode] to disable all extensions, themes and plugins. If this fixes your issues, be them with RAM or CPU usage, then you know it's a problem with plugins, themes or extensions. Proceed to number 2. If safe-mode doesn't fix the issues, then read bellow, after this list;
    #update all extensions, themes and plugins in your Firefox. If this doesn't solve the issues, proceed to the following number;
    #disable all extensions, themes and plugins in your Firefox (not running safe-mode). Being certain that, as in safe-mode, the problems you're having have gone away, enable one plugin at a time. You should be certain that you WANT that plugin to be enabled, so keep your overall number of plugins as low as possible. When you encounter the problems, you know you've found a problematic plugin, so disable it for good. Keep enabling all plugins (except problematic ones) until you've gone through them all.
    #enable one extension at a time. Again, be certain that you WANT that extension to be enabled, so keep your overall number of extensions as low as possible. Also, try the theme you want to have installed so see if that is what's causing the problem. When you encounter the problems, you know you've found a problematic extension/theme, so disable it for good. Keep enabling all your extensions (except problematic ones) until you've gone through them all;
    #you're done! You've fixed your problems with problematic add-ons. If you want to keep using those problematic add-ons, please contant their author for support.
    Ok, if disabling all extensions and plugins through safe-mode didn't work to bring Firefox's CPU and RAM usage to good levels, then you have different issue. The most likely scenario is that you have a third party software running on your computer that is messing with Firefox. Do as follows:
    #try reinstalling Firefox. No data will be lost. You can get the latest version for free at [http://www.getfirefox.com/ getfirefox.com]. If that doesn't fix the problem, proceed;
    #do a virus/malware check on your computer. If this doesn't fix it, proceed;
    #disable all software running in the background that you don't want to have running in the background (in windows, this is done by pressing WINDOWS+R in your keyboard, typing "msconfig" (without the commas) and pressing enter. Now, under the "Startup" tab, you can uncheck the software you don't want, and reboot your system for changes to take effect. If you're unsure of what software you want running, ask someone with more experience). If this doesn't fix your issues with Firefox, proceed;
    #check your firewall/antivirus/security suite for enabled functions/features that you don't want and/or may be conflicting with Firefox. You'll find that these features are most likely tied to Internet Security features, such as link scanners or URL checkers and the like. If you're not sure they are conflicting with Firefox, simply try to disable them to see whether or not that's true. As long as you don't browse the web with your antivirus completely off and your firewall completely turned off, there should be no problems. If this doesn't solve the issues, proceed to the following number;
    #check your operating system security options, mainly advanced options that are not configured by default. While it's very unlikely that this may be the cause of the problem (after all, it's the last item on the list), it's remotely possible. If this doesn't work, proceed to the following point;
    #update your modem/router software. There have been some reports that some modem/router software may cause Firefox and other browsers to loose performance and/or stability. If updating doesn't fix your issue, try other versions of the software, if possible. If you need support with this, contact your modem/router manufacturer. If this doesn't help, proceed;
    #clean up your OS registry, using appropriate software. Make sure you've followed my instructions correctly, but if this all doesn't work, [http://support.mozilla.com/en-US/kb/Managing+profiles create a new Firefox profile] (this can be temporary, of course) and see if the issues persist. Report here the results, so we can't help you further.

  • Firefox very slow and high cpu usage!! (all other browse slow too)

    Sorry, I asked it in 'Newbie Corner' , but still no resolved. so I asked here.
    Hi all,
            when i open a website just as www.sohu.com,   my firefox (3.0.3) hang on, then display the web page very slow , and slow scroll , firefox cpu usage nearly about 100.
            I tried some sloution,like modify /etc/enviroment to set MOD_DISABLE_PANGO=1,
    or disable 'tell me if a web site ...' in firefox security option.
    but still slow.
    some people says it's must because flash or some js.
    but when  i try it in windows or ubuntu, it very fast, not like in archlinux.
    so i think some thing wrong in archlinux.  I need your helps.
    thank you.
    p.s.
    1.  pacman is very fast (the speed of wget about 400k/s)
    2.  gnome web browser like firefox , slow and high cpu.
    3.  the list of output of 'locale'  about 11 lines.
    4.  i have already set host name like wiki says.
    5.   the system is  a new system

    http://wiki.archlinux.org/index.php/For … Bumping.27 ??

  • Weblogic server performance is very slow and memory consumption is 99%

    I am facing one critical issue with the weblogic server..
    The server performance is very slow and one of the process is consuming more that 99% of the memory. Bouncing the server is not resolving the issue.
    Can see the memory usage below...
    Tasks: 134 total, 2 running, 132 sleeping, 0 stopped, 0 zombie
    Cpu(s):100.0%us, 0.0%sy, 0.0%ni, 0.0%id, 0.0%wa, 0.0%hi, 0.0%si, 0.0%st
    Mem: 7990656k total, 7947652k used, 43004k free, 9164k buffers
    Swap: 16386260k total, 4691704k used, 11694556k free, 56352k cached
    PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND
    10263 oracle 24 0 10.9g 6.5g 14m S 99.2 85.3 34:31.52 java
    7409 oracle 16 0 12764 768 508 S 0.3 0.0 0:16.45 top
    Can some body help me on this.
    Thanks in advance.
    -Prasad

    Use the weblogic forum-
    WebLogic Server - Upgrade / Install / Environment / Migration

  • I updated my iPod touch 4g 64gb to iOS 6.1 and now it's been very slow, safari keeps crashing, apps being very slow and crashing ? Can anyone help ?

    I updated my iPod touch 4g 64gb to iOS 6.1 and now it's been very slow, safari keeps crashing, apps being very slow and crashing ? Can anyone help ?

    Next
    Try:
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Go to Settings>Safari and Clear Cookies, Data and History
    - Restore from backup. See:                                 
    iOS: How to back up           
    - Restore to factory settings/new iOS device.

Maybe you are looking for

  • I don't understand why my sim card has a new phone number

    I was with T-Mobile on a sim-only monthly contract. This was due to expire, and naturally my new contract is with EE due to the merge. I was told, after agreeing on a new sim-only contract, that the sim card that would be sent to me would have my usu

  • Pie Chart in WEBI is Grey color

    Hi All, As part of my project requirement I need to develop a WebI report with Table and Pie chart.I selected the pie chart, intially it was in grey color and assigned the data to chart .When I tried to change the color of the chart it is not display

  • How to extract the R/3 Contracts data to CIF format

    HI, Please help me out for how to extract the R/3 Contracts data to CIF format. Regards, Venkat

  • Laptop cannot see airport express

    I have three laptops on my home network.  Two can see my airport express, one cannot.  I have the airport express set to join my home network automatically.  I am only using airport express to be able to listen to my itunes music through my home ster

  • What model HD are they putting in the new Mac Pro's?

    What model hard drives are they putting in the new Mac Pro's? I need to purchase a second drive in anticipation of a 2.8 I'm ordering and I want to get the same brand and model.