5800 xpress music messaging has gone very slow aft...

Dear Friends,
I have recently updated by 5800 xpress music OS and since then the messaging has gone very slow.
it takes lot of time in loading the SMS editor and lot of time in sending a msg.
can some body please give me some solution to improve the speed.

@stripeertw
The brass contact that springs into taper on jack plug is on the vertical surface adjacent to where battery charger 2mm pin is inserted, away from all the other electrical contacts which are situated at either 180°or 90° to it for your information.
Happy to have helped forum with a Support Ratio = 42.5

Similar Messages

  • Safari has gone very slow

    Hi there
    I have an iPod touch and have found that safari has gone really slow. It takes ages to load the page and zoom in and out also scrolling up and down. It al started when I let my kids aged 11 and 9 used it.  They where not as careful as me when using it but I was supervising and they did not drop it or anything. I have rebooted it then reset it to factory settings in iTunes. I have taken off the apps that they put on there but it made no difference. It has been fine since ios 4 update came out so it had nothing to do with that. I always thought that safari was quite quick but now its unusable on some sites, manly sites with moving images. It is like there is not enough ram any more. I know its not the modem as the two computers that i have are just the same, pretty good and there both using safari. Its strange as my mobile phone with android did the same thing about 6 months ago and nether improved. The phone does it on any wifi and mobile network, so again it cant be the modem. Is there any thing I can do with the ipod to speed safari up, or is that it I cant use safari any more and use opera instead?
    Thanks for any help

    thanks both for the repliy
    I now its not the network as its fine with everything else. Also I have already tried restoring the ipod with itunes and that didn't make any difference. I have now reset it like you said but that didn't work. Not sure what to do now maybe safari just want work like it use to. I forgot to say it is a second gen ipod touch so it is quite old now.
    Any more help I would be very thankful for.

  • 5800 Xpress Music, Messages are not shown in my in...

    Hi,
     Please get me out of this issue. Suddenly messages( inbox, sent items, folders also) are not shown in my mobile. When I checked memory details I found messages occupied some memory in my memory card. Where I can check my messages in memory card. How do I get my messages back.
    Thanks,
    Balu

    Messaging-->Options-->Settings-->Other-->Memory In use..
    --------------------------------------------------​--------------------------------------------------------​--------------------------------------------------​--If you find this helpful, pl. hit the White Star in Green Box...

  • Labview 2009 has gone very slow all of sudden

    Hi,
    Until yesterday everything was fine. But today, when I pressed labview icon, it took more than 3 minutes to show me gettin started window. Also, when I try to open my project, it is taking significantly longer. Any ideas to get it back on running normally
    Ta

    Was your computer doing something else at the same time?  Running a virus scan or a backup, anything like that?
    Ed
    Edward Motts
    Certified LabVIEW Associate Developer

  • 5800 xpress music.Clock is running slow.

    The Time in my 5800 xpress music changes aautomatically.Its running slow.I had corrected the time 2 weeks back and now its 10 mins slow. Automatic Time update option is turned OFF.Pleaase help me...

    It's a well-known bug in the 5800. In fact a cursory search on these forums will probably return many hits.
    Google for a piece of software called FreeTimeBox. You can set it to sync your clock using NTP protocol whenever you switch the phone on.
    Message Edited by grschinon on 31-May-2009 03:32 PM
    Was this post helpful? If so, please click on the white "Kudos!" star below. Thank you!

  • My FileMaker has been very slow

    Recently my File MAker pro has gone very slow. The version is 5.5. Is it too old for leopard?

    I'm really tired of seeing the pinwheel every time I open an application
    That's a sign of a drive that's either failing, or has a lot of bad sectors as it's taking time for the drive to read the sectors, OS X gives the spinning beach ball effect as it's waiting.
    It also could be because your drive is nearly full.
    The bad sectors might have come because you are moving the computer while the hard drive is in operation.
    Your very likely going to have to backup your data off the machine to a external storage drive (not TimeMachine) Zero Erase the entire drive and resinstall OS X etc.,
    Most commonly used backup methods
    Reducing bad sectors effect on hard drives
    How to erase and install Snow Leopard 10.6
    You might take this opportunity to install a new hard drive, bigger, faster or even a SSD even.
    http://eshop.macsales.com/installvideos/

  • N_gage in nokia 5800 xpress music

    why nokia 5800 xpress music dont has n-gage but nokia n97 has it and they are nearly to each other and they are from the last phones

    After gathering information from various sources I have finally managed to compile a decent guide to install NGage on the Nokia 5800XM using the files which have been circulating the web for the past week.
    If you have any questions please PM me on the forum or reply to the topic and I will try my best to help.
    Installing NGage
    Step 1
    Download the NGage Install Package which I have compiled below:
    - http://www.1filesharing.com/download/RIROTQGS/NGage%20-%20Nokia%205800.rar
    Step 2
    For this to correctly work, you will need to have your phone hacked, this should be no problem providing you have a little confidence and common sense. I can confirm that using HelloOX does work as it is the method I used and I can use NGage fine. If you're phone is already hacked with HelloOX and you're having trouble, ensure that all patches (open4all etc. are applied and set to auto using ROMPatcher.
    Step 3
    Copy the file "NGage 2.0 Installer.sis" to your phone and install it. You will need to sign the file using SignSIS GUI or a similar application, you should already have a certificate if you have hacked your phone as you need to sign HelloOX to hack successfully. The install process will take quite some time and you will be prompted to press "Yes" to various warnings. I can confirm that no harm has come to my phone from this process, however, proceed at your own risk. I take no responsibility.
    Step 4
    Once NGage has been installed, you will be able to find it under "Applications" on your phone. The icon will be an orange "N" and it will say "Games" underneath. To play NGage games they must be copied to "E\N-Gage" with "E\" being your memory card.
    Controlling NGage
    Since NGage is designed for phones with a keypad, and the Nokia 5800 is almost completely touchscreen, the controls must be customized. I have so far come up with two solutions, they are as follows.
    Control Method #1
    This is the most stable and easy to configure control scheme, I can confirm this works OK.
    Step 1.
    Sign and install "Virtual Keyboard.sis" which can be found in the "Control Method #1" folder of the Install Package.
    Step 2.
    Run the virtual keyboard application from your "Applications" menu and then start the NGage application. You can use the Virtual Keyboard to control your games.
    Control Method #2
    This control scheme is still a work in progress but, with some fiddling and a varying degree of luck, you may be able to get it to work. Some people have confirmed it working with different settings. I feel that this setup, if working correctly, would be the best way to control NGage on a Nokia 5800. I would like to request feedback from anyone who has this method working!
    Step 1
    Sign and install "Virtual Keyboard.sis" and then "Virtual Key.sis", both of which can be found in the "Control Method #2" folder of the Install Package.
    Step 2
    Start up "Virtual Keyboard" so that you have it running on screen and then proceed to start up "Virtual Key".
    Step 3
    In the Virtual Key application, choose "Options" then "Load Mode" and choose "Custom Mode 1".
    Step 4
    Press "Options" then "Add". Highlight "Original Key" and then press the Right arrow on the Virtual Keyboard application you loaded earlier. Then highlight "Mapped Key" and hold down the "Volume -" key then press the "Volume +" key. If all has worked correctly the mapped key should change to "Vol+". Then do the same for the following
    Vol+ .................. Left
    Vol- ................... Right
    No ..................... Up
    Yes ................... Down
    Camera .............. K
    Then press "Options" and save your "Custom Mode 1".
    Step 5
    Set the Virtual Key application to run in the background and completely exit the Virtual Keyboard application.
    Step 6
    Start up the NGage application and try to play a game. Hopefully the Up/Down volume keys will control Left/Right when holding the phone horizontally, and the other keys should do what you mapped them to above. You may have to use the volume keys in the same way you had to set them (Hold down Vol- and press Vol+ etc. So now hopefully you can play NGage. Let me know of any other control schemes you guys come up with!
    The installer and key mappers are freeware, but you need to purchase the games legally at www.n-gage.com.
    I'm an Xploit - Please feel free to post your issues, feedbacks in this discussion forum and I'll do my level best to help, otherwise my knowledged friends whom are around willing to help you. Thank you !

  • G5 Dual - DVD Reader has gone very very slow after Leopard

    After 1 Migrate install and 1 clean install, I notice that reinstalling apps is taking 4/5 times as long as they should it's as if my DVD Reader has gone very very slow. I thought at first it was the migration that had caused FCPS2 to reinstall slow.
    (Sony DVD RW AW-G170A 4 months old) on G5 Dual 2's)
    FCPS2 wanted 19-hrs to install, I waited 6 hrs and then gave up. Luckily or unluckily as the case may be I used the time install Leo on my other Macs.
    In the end I have installed Apps over the Firewire network connected to my other G5 Dual with the stock DVD drive, they are installing fast now.

    Some more info about my setup:
    *Simultaneous Dual band AEBS:*
    Radio Mode: 802.11n only (5 GHz) - 802.11b/g
    Radio Channel Selection: Manual - 161 (5GHz), 6(2.4GHz)
    *Airport Express:*
    Wireless mode: Extend a wireless network
    Allow wireless clients checked under the name of the network (same as for AEBS).
    Both are WPA/WPA2 Personal security. And both the routers were upgraded to 7.4.2 firmware this morning with the hope that it will help.
    *N Devices (both working fine):*
    Apple TV 40GB
    2009 Model Mac Mini upgraded to Snow Leopard - working perfectly.
    *G Devices:*
    Thinkpad running WinXP
    Dell Laptop running WinXP
    Acer Netbook running WinXP
    iPod Touch
    iPhone 3G
    Linksys webcam
    _All of the above are working fine_.
    +2008 model Mac mini -+ upgrade to Snow Leopard shows extremely slow wifi connection that it is unusable. It takes 20min to load apple homepage. When I boot from the clone of my Leopard lying on my external drive, it works perfectly.
    I compared the settings between all the tabs of Network-->Airport-->Advanced and they are identical between Snow Leopard and Leopard mode except that SL doesn't have the "Apple Talk" tab.
    Appreciate any help to debug this.

  • 5800 Xpress Music Text Messaging Fails

    I've been trying the whole week to send & reply text messages on my new 5800 with no success,it chooses to send in 3 minutes but when that elapses text fails all the time, what's up with that , any ideas ?

    Hey i am using the 5800 Xpress Music too ... The same problem is happening to me!!!!!!!! HELP WANTED !!!!!!!!!!!!!!!!!

  • Problem with Nokia 5800 Xpress Music

    Hello. I have a Nokia 5800 Xpress Music for about a year now and been taking great care of it. I don't know why but a while ago it started freezing at times when i would try to turn on the camera..had to multiple times restart the phone and remove the battery in order to make it work (In the open applications menu it would show the camera running but you wouldn't be able to use it). Then i noticed that the two touch buttons it has in the main screen (dialing and phonebook shortcuts) wont work either, no matter how many times i press them nothing happens. Same goes for the Green and Red button on the left and the right side of the phone (Accept/Decline buttons), they won't work either when i'm on the main screen (wallpaper), they do work in the main menu though. I tried resetting my phone to manufacturer settings but nothing happened. What is wrong with my phone? Can anybody help me with it very please?

    @guilty_gr
    Welcome to the forum!
    When you say restored "factory settings" I don't know whether you mean that you backed up essential data then keyed in *#7370# followed by 12345 (default Nokia lock code unless altered by yourself); I would remove any memory card first and see if any difference before restoring device.
    Happy to have helped forum with a Support Ratio = 42.5

  • 5800 Xpress Music - Supporting software install fa...

    Hello,
    I'm using Windows XP SP3 and the latest version of PC Suite downloaded on Nokia website. My phone is a 5800 Xpress Music and I did upload the firmware yesterday.
    I'm running into trouble to connect my phone to the PC and transfer data (any kind). I made a clean install of the latest version of PC Suite, then connected my phone to one of the USB ports of my PC and selected "PC Suite" on the phone when asked for connectivity type. Windows recognized the device and installed drivers successfully. When I started PC Suite, it recognized the phone too, but it said that it needed to install some "connectivity supporting software" or something like that. There was also a message saying that I should accept every request appearing on the phone. However,after a few seconds, the installation window said "Failed to install supporting software" without any further explanation. There was absolutely nothing appearing on the screen of the phone. I've tried to install the supporting software again by right-clicking on the phone icon, selecting options and chosing the appropriate action, but the installation keeps failing.
    Therefore, I cannot sync any data between my PC and the phone. Also, if I start Nokia Music and choose  "multimedia transfer" connectivity mode, the phone appears in the interface, but when I try to drag and drop any song on the phone icon, the transfer immediately fails.
    Please tell me what I should do next (I already uninstalled and re-installed the whole Nokia PC software suite twice, which is quite boring and time consuming)
    Thank you for your help.

    Hi there. Unexpectedly things started working better (but not yet perfect).
    I HAD been trying updating the drivers related to the phone yesterday, to no effect. But after giving up and disconnecting the phone I saw a disabled/broken device driver in the device manager tree (under portable devices) and deleted it. Then today I attached the phone by bluetooth and saw NOS start up and say that it HAD installed the supporting software!
    In the System event queue there are a few messages about drivers being installed:
    Event Source: WPDClassInstaller
    Drivers were successfully installed for device WPD_NOKIA_73fd2114_0d73_49c3_9c65_1a2b2c7f6eba.
    Event Source: WPDClassInstaller
    Media player and imaging program compatibility layers were successfully registered for device WPD_NOKIA_73fd2114_0d73_49c3_9c65_1a2b2c7f6eba. Layer bits 0x00000003 were requested, layer bits 0x00000003 were registered.
    Event Source: WPDClassInstaller
    Autoplay registration was skipped for device WPD_NOKIA_73fd2114_0d73_49c3_9c65_1a2b2c7f6eba.
    Event Source: WPDMTPDriver
    MTP WPD Driver has started successfully.
    Photos, music and messaging seems to have synchronized nicely. Contacts have synchronized with Outlook, but the Calendar is failing to synchronize. After a Sync All I'm getting the message:
    "Sync cancelled//Completed syncing the following content types: Contacts and Photos and Messaging.//Failed to sync the following content types: Calendar and Notes.//Reconnect the USB cable to your device or connect vis Bluetooth. Then try syncing again."
    I get a similar message syncing calendar alone, with the error code 80043bd4 attached. 
    Same results if I'm using USB or Bluetooth.
    Got reckless and upgraded to Ovi Maps 3.0, which proceeded cleanly.
    So partly solved, but calendar (important for me) still not syncing.
    cheers...
       Martin... 

  • My Mac has gone really slow since upgrading to Mavericks. Any suggestions as to how to speed things up again?

    My Mac has gone really slow since upgrading to Mavericks. Any suggestions as to how to speed things up again?

    First, back up all data immediately unless you already have a current backup. If you can't back up, stop here. Do not take any of the steps below.
    Step 1
    This diagnostic procedure will query the log for messages that may indicate a system issue. It changes nothing, and therefore will not, in itself, solve your problem.
    If you have more than one user account, these instructions must be carried out as an administrator.
    Triple-click anywhere in the line below on this page to select it:
    syslog -k Sender kernel -k Message CReq 'GPU |hfs: Ru|I/O e|find tok|n Cause: -|NVDA\(|pagin|timed? ?o' | tail | awk '/:/{$4=""; print}' | open -ef
    Copy the selected text to the Clipboard by pressing the key combination command-C.
    Launch the Terminal application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
    Paste into the Terminal window (command-V). I've tested these instructions only with the Safari web browser. If you use another browser, you may have to press the return key.
    The command may take a noticeable amount of time to run. Wait for a new line ending in a dollar sign (“$”) to appear.
    A TextEdit window will open with the output of the command. Normally the command will produce no output, and the window will be empty. If the TextEdit window (not the Terminal window) has anything in it, stop here and post it — the text, please, not a screenshot. The title of the TextEdit window doesn't matter, and you don't need to post that.
    Step 2
    There are a few other possible causes of generalized slow performance that you can rule out easily.
    Disconnect all non-essential wired peripherals and remove aftermarket expansion cards, if any.
    Reset the System Management Controller.
    Run Software Update. If there's a firmware update, install it.
    If you're booting from an aftermarket SSD, see whether there's a firmware update for it.
    If you have a portable computer, check the cycle count of the battery. It may be due for replacement.
    If you have many image or video files on the Desktop with preview icons, move them to another folder.
    If applicable, uncheck all boxes in the iCloud preference pane. See whether there's any change.
    Check your keychains in Keychain Access for excessively duplicated items.
    Boot into Recovery mode, launch Disk Utility, and run Repair Disk.
    If you have a MacBook Pro with dual graphics, disable automatic graphics switching in the Energy Saverpreference pane for better performance at the cost of shorter battery life.
    Step 3
    When you notice the problem, launch the Activity Monitor application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Activity Monitor in the icon grid.
    Select the CPU tab of the Activity Monitor window.
    Select All Processes from the View menu or the menu in the toolbar, if not already selected.
    Click the heading of the % CPU column in the process table to sort the entries by CPU usage. You may have to click it twice to get the highest value at the top. What is it, and what is the process? Also post the values for User, System, and Idle at the bottom of the window.
    Select the Memory tab. What value is shown in the bottom part of the window for Swap used?
    Next, select the Disk tab. Post the approximate values shown for Reads in/sec and Writes out/sec (not Reads in andWrites out.)
    Step 4
    If you have more than one user account, you must be logged in as an administrator to carry out this step.
    Launch the Console application in the same way you launched Activity Monitor. Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
    View ▹ Show Log List
    from the menu bar.
    Select the 50 or so most recent entries in the log. Copy them to the Clipboard by pressing the key combinationcommand-C. Paste into a reply to this message (command-V). You're looking for entries at the end of the log, not at the beginning.
    When posting a log extract, be selective. Don't post more than is requested.
    Please do not indiscriminately dump thousands of lines from the log into this discussion.
    Important: Some personal information, such as your name, may appear in the log. Anonymize before posting. That should be easy to do if your extract is not too long.

  • Display problem in 5800 xpress music

    I had purchased a 5800 xpress music in April 2010.  For the last two months there is some problems in the display.  Sometimes, the display is gone and only lines are seen, when the key pad lock on.  This pevails for long time.  Due to this, I am unable to make any call or identify the incoming call.  Any solution?

    What version of Firmware ? Check for any updates thru' the OVI Suite..
    If that doesn't solve the issue, you may try the Soft Reset by dialing    *#7370#     followed by 12345 (Default security code) when prompted. If you have set your own code, enter that instead... Note that the Soft Reset will erase all data from the phone, so back-up your data before doing that...

  • Help Me! (Nokia 5800 xpress music)

    I know that is my fault but i getted some viruses on my nokia 5800 xpress music! I do not know the type of the viruses but all i know is that is eating my memory! Even if i erased all things, i still have at sis aplications to much memori in phone so i have 0 kb memory in C at phone! Can you help me? I tryed to put again the software but i only get a new version on it or the same version and the viruses remain there! Help me please because I started to miss my phone...
    Solved!
    Go to Solution.

    Do this:
    A hard reset (x6, 5800 and 5230 only) is done by the following (warning, this deletes all data on your phone):
    1.) Turn off the phone and remove battery for 5min
    2.) Reinsert battery
    3.) Press and hold the green, red and camera buttons. DO NOT LET GO.
    4.) While holding the three buttons, press the power key to boot the phone up.
    5.) Keep on pressing until you see the country selection screen.
    A correctly done hard reset would show you that everything on the phone (contacts, messages, calendar entries, etc) would be deleted. So it is advisable to back them up. Upon restoration, do not restore settings or files if possible.
    Also, format your memory card. Just make a copy of your songs and pictures on your PC.
    If you find my post helpful please click the green star on the left under the avatar. Thanks.

  • Help: My PowerBookG4 has gotten very slow

    All of a sudden my PowerBook G4 has become very slow. I get lots of beachballs while it is thinking what to do. It takes 5 minutes to restart and sometimes 5-10 seconds just to open a folder (with a beachball while I wait). All apps are running slow. I have a 60 GB Hard drive with 6.5 GB free space. I just run repair permissions (nothing needed to be repaired) and I veriified the drive with HD utility and it said it is OK. Here is the info on my system:
    Machine Name: PowerBook G4 12" Machine Model: PowerBook6,4;CPU Type:PowerPC G4 (1.1); Number Of CPUs: 1; CPU Speed:1.33 GHz; L2 Cache (per CPU):512 KB Memory: 768 MB; Bus Speed:167 MHz.
    Message was edited by: Esteban Celis1

    Esteban:
    Your HDD space is pretty close to the minimum 10%, although I suspect that is not the issue. However, you might benefit from taking a look at Dr. Smoke's FAQ Freeing space on your Mac OS X startup disk and free up some space before it gets too full and you run into further difficulties.
    Your RAM at 512 MB is a bit meager. Your RAM will max out at 1.25 GB. I suggest you boost it to at least 1 GB.
    I am not sure what maintenance procedures you do regularly. I suspect that one of the issues is that your computer needs maintenance. Download and launch MacJanitor and run the daily, weekly, monthly tests.
    Here are some article on maintenance procedures which have al lot of excellent suggestions and links to resources:
    Macintosh OS X Routine Maintenance
    Mac OS X 10.3/10.4: System maintenance
    Maintaining OS X
    Tuning Mac OS X Performance
    Please post back with update or further questions or comments.
    Good luck.
    cornelius
    Message was edited by: cornelius

Maybe you are looking for

  • Multiple BAPI calls in RFC Adapter

    Hi, Dear Friends! I have asynchronous scenario File to RFC(BAPI). File contains raws. For each raw I need to execute BAPI. With the help of each raw I need to construct one document in R/3 database with the help of BAPI. But now my scenario provide o

  • My 2007 iMac keeps randomly restarting.

    Running latest Mavericks on my late 2007 iMac. Recently had to do a Time Machine recovery and since my machine randomly restarts by itself when left unattended. While monitoring Console the following message keeps repeating and suspect it is the root

  • New computer purchase hinges on use of XP on Mac

    I'm in the market for a new laptop, preferably a Mac that will run XP (and potentially Vista in the near future?). My specific need is to be able to occassionally run Windows XP, make a wireless Internet connection (WEP password entry may be required

  • SQL Server 2012 Undetected Deadlock in a table with only one row

      We have migrated our SQL 2000 Enterprise Database to SQL 2012 Enterprise few days ago.   This is our main database, so most of the applications access it.   The day after the migration, when users started to run tasks, the database access started t

  • How to change language on a rental movie from apple tv ?

              How can I change langiuage when i have rent a movie with multiple language listed into the movie description. i wanna have it in french but only play in english ?