5800 XpressMusic cannot connect to PC suite becaus...

I decided to uninstall OVI_PC suite (ori.version that I get with my phone) to try the new one (version 2)
With the new PC suite, I can't use the phone as the modem because of MTP device.
So, I removed and tried NOKIA_PC suite (version 7.1). The MTP device message occur again.
Then I decided to call Nokia careline that suggest me to
1) uninstall 2 devices (Nokia USB Modem & I don't remember) in device manager.
2) Restart both phone & laptop.
3) Connect again in other USB port. >> Now I can connect the phone modem and surf the net.
**Specification
-Windows XP sp.2
-NOKIA_PC suite 7.1

what was the other driver?
was it
Nokia 5800 XpressMusic under Portable Devices.
or
Nokia 5800 XpressMusic USB (COM4) under Ports (COM & LPT
i am having similar problem see my post here: /t5/Nseries-and-S60-Smartphones/5800-as-modem-problem-when-quot-Opening-Port-quot/td-p/784877
thanks.

Similar Messages

Updating ipod touch to os5.1 got an error message "cannot connect the ipod touch because the pairing record is missing"   don't know what this means or how to fix but am stuck, only option is to answer ok and close the error box. Any ideas?

Updating ipod touch to os5.1 got an error message "cannot connect the ipod touch because the pairing record is missing"   don't know what this means or how to fix but am stuck, only option is to answer ok and close the error box. Any ideas?

#1
- Try another cable. The cable for 5G iPod (lightning connector) seems to be more prone to failure than the older cable.
- If a 5G iPod
Iphone 5 lightning port charging problem - SOLUTION!
- Inspect the dock connector on the iPod for bent or missing contacts, foreign material, corroded contacts, broken, missing or cracked plastic.
- Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar
#1.1 n/a because the errror message overrides it
#2 see #1
#3 iOS: Device not recognized in iTunes for Mac OS X
But could be caused by #1
#4 Covered by previous ones
#5 Obvious jpegs are photos and thus will not sync as videos. Also see:
iTunes: May be unable to transfer videos to iPhone, iPad, or iPod
iTunes: Frequently asked questions about viewing and syncing videos
#6 iOS: If you can't back up or restore from a backup in iTunes
First #7 See #6
Second #7 You have so many other problems resolve those first
#8 Resolve other problems first

When connecting my iphone 4 to itunes for the first time i get the following message "cannot connect to this device because Apple Mobile Service is not started" what does this mean and how do I solve it?

when connecting my iphone 4 to itunes for the first time i get the following message "cannot connect to this device because Apple Mobile Service is not started" what does this mean and how do I solve it?

I'd start with the following document with that one:
iPhone, iPad, iPod touch: How to restart the Apple Mobile Device Service (AMDS) on Windows

ITunes cannot connect to my iPad because pairing record is missing.

This is a one month old iPad that I just upgraded to ios 5 before I used it. I don't know if the problem is in the upgrade.
When I did the upgrade, the message "iTunes cannot connect to the iPad because the pairing record is missing" came up. I figured I would call AppleCare in the morning. Yesterday I hooked the iPad up to the computer and it paired fine with iTunes (at least it showed in the left column under devices) but did not show up in My Computer as being hooked into a USB port. Now today it says that it can't pair with iTunes. Any ideas of what I do before I make an appointment with the Genius desk? I'm on the west coast and AppleCare hours are not compatible with my schedule. Wish I would have known it wasn't 24/7 before I purchased it.

This helped after all other fixes wouldnt
delete "itunesDB" and "itunesCDB" using this program
http://www.i-funbox.com/
See this video http://youtu.be/ZwTtqinbogQ
It works.

The following error occurred while performing a repository action. Error - [PCSF_10007] Cannot connect to repository [dev_repo] because \n[[REP_61082] AdminConsole's code page (UTF-8 encoding of Unicode) is not one-way compatible to repository dev_repo's

Can some one help me out here ?

Hello Experts, Am facing the below error in console page.Can someone help out here ? The following error occurred while performing a repository action. Error - [PCSF_10007] Cannot connect to repository [dev_repo] because \n[[REP_61082] AdminConsole's code page (UTF-8 encoding of Unicode) is not one-way compatible to repository dev_repo's code page (MS Windows Latin 1 (ANSI), superset of Latin1). Failed to connect to repository service [dev_repo].]. Below my environment variables in .bash_profile LANG=en_US.utf8; export LANGLC_ALL=en_US.utf8; export LC_ALLINFA_CODEPAGENAME=UTF-8; export INFA_CODEPAGENAME Thanks,Ahmed.

Today, my iPad2 wouldn't delete mail. Then the screen turned black. I turned the iPad2 off then on. Got black screen. Tried backing up to iTunes. Got the message "iTunes cannot connect to this iPhone because unknown error occurred (OxE8000065). Help

Today, my iPad2 wouldn't delete mail. Then the screen turned black. I turned the iPad2 off then on. Got black screen. Tried backing up to iTunes. Got the message "iTunes cannot connect to this iPhone because unknown error occurred (OxE8000065). Help, please.

Did you try restarting it by holding down the hold and lock button at the same time until you get the apple logo? If you already tried that then you should try putting it in DFU mode and doing a restore by following these instructions- http://www.iclarified.com/entry/index.php?enid=1034

Please help nokia 5800 won't connect in pc suite m...

Hi
Ive been going crazy trying to connect my 5800 via usb to my laptop (vista). When i connect via bluetooth its fine but usb simply wont install drivers. says that i am missing phone parent . i have tried everything i have read e.g unistalling everthing and using pc suite cleaner and then re installing pc suite 7.1, removing wdfo1000.sys file form system 32 folder and placing on desktop. Ovi suite wont connect either because of the driver problem. i am connecting in pc suite mode. i need the usb as bluetooth is too slow. please help

Sorry, I do not have an answer, and because I do not know how to start a 'new topic' on the discussion board, I would like to ask my question here:
My ovi nokia suite takes aboutbtween 1 and 2 minutes to open, after I have clicked on it for the first time. My previous nokia suite (E70) opened immediately. Does anyone have the same 'problem', or is it just something I must get used to ?
ps. my PC is not the fastest, but it is not slow either, I have no problems opening other programs on my PC, therefore it must be something with ovi suite itself.
Any suggestions to open it quicker ?
ps. I know it is not a nokia question, but can anyone recommend any PC cleanup (anti-virus) programs ?
Thank you

Cannot Connect to Nokia Suite

Hi,
As my Nokia was running bit slow, i did a hard reset by pressing *#7370#, the phone was not connected to PC. After the phone was restarted, I cannot connect to the Nokia Suite on my laptop. It seems it cannot even realise that a phone is connected through USB. Please help.
Thanks

@Worldwar
If you change USB connectivity mode on C5-00 user interface to "mass storage" mode does your PC recognise it in this mode?
Happy to have helped forum with a Support Ratio = 42.5

Nokia 6708 - cannot connect to PC Suite 6.85

I cannot connect my 6708 to PC Suite 6.85 although I followed all steps as per web site and customer "care". I get the readin " Nokia 6708 connected in a non compatible mode " How can I undo this and make it compatible. Apparently customer care cannot help. Anyone with a solution ? Much appreciated as I paid a damn lot of money for this phone and use it for my business. Thanks a lot

Does any prompt appear in your phone when you connect the usb cable? In some Nokia like my N91-2, I have 3 option(PCSuite,Mass Storage, & Music) & selecting mass storage give that message, which one have to ignore. Windows treat the phone memory as just another external harddisk like flash disk.
Did you download the PCSuite version specifically for your phone model?Message Edited by android on 12-Dec-200711:22 AM
Knowledge not shared is knowledge wasted!
If you find it helpfull, it's not hard to click the STAR..

My Nokia phone cannot connect to Nokia Suite (E6-0...

Hello,
I have the following problem. 2 days ago I updated my Nokia Suite with a new version ... Everything went smooth, but, when I tried to connect my phone (both E6 and C5) the suite displayed an error message saying that the phone is not connected in PC Suite mode ... I checked the setting on both phones and both were in PC SUite mode.
I emailed the Nokia support and they suggested me to reset the phone to factory settings ... I did it, but the problem still persists ... Then I tried to reinstall the Suite ... But without any result ... I still cannot connect the devices to Nokia suite.
Any suggestions on how to solve this issue? Are there others that are experiencing the same issue?
Solved!
Go to Solution.
Attachments:
message.png ‏18 KB
print-screen-c5.png ‏59 KB
print-screen-e6.png ‏60 KB

Hi EugeniuSp,
- Which Windows version and which Windows Service Pack do you have installed?
After that, please try following:
- First, disconnect both phones from your PC.
- Then reboot your PC
- When PC has started again, start again Nokia Suite
- Try now connecting your phone in PC Suite mode to your PC via USB cable
- Does Nokia Suite now connect to your phone?
If that didn't help, try following:
- Disconnect your phone from PC
- Go into WIndows Control Panel
- Search there installed programs
- Uninstall Nokia Connectivity Cable Driver
- Restart your PC
- When PC has restarted, please run again Nokia Suite installation package (available from www.nokia.com/nokiasuite) and choose repair option
- After Nokia Suite installation has completed, try connecting your phone again to your PC.
- Does Nokia Suite now connect to your phone?
Cheers, Samuli

My airport extreme cannot connect to the internet because it says it has no DNS servers. How can I fix this?

I just moved and am setting up a new apartment. Verizon put in internet service yesterday. I got a network going on my airport extreme but it could not connect to the internet because it says it has no DNS servers. help! What do I do now?

Ensure that the ethernet is connected to the WAN port (with the dotted circle).
You may have to reset and reconfigure your Airport Extreme.

6102 CA-42 Cannot Connect to PC Suite

I have what appears to be an offbrand CA-42 cable (from eBay). It has always worked fine for me in the past, but I recently did a fresh install of XP with SP2, and now I'm running into some problems. From the CD, I first install the cable drivers, then follow all instructions perfectly through the PC Suite installation. When it gets to the "Get Connected" part, I'm stuck on the screen where I connect my phone for the final part of the setup. My PC's definitely recognizing the 6102 from the USB port, but I'm just hanging on the "Connect Your Phone" screen and the phone never adds its profile to PC Suite. I've already searched the forums and haven't found a working solution yet. Any ideas???Message Edited by themilstead on 24-Oct-2006
01:46 AM

because this is vitual COM port assosiation by windows, you really cannot predict what COM port will be assigned to this device, it depends what other stuff you have in your PC system that requires COM port.
What I mean was that try to figure out from PC Suite - manage connections, that do you have, when selecting CA-42 a choise to select a COM port and if yes, select the one that is visible.
With Nokia CA-42 (the original) the COm port association normally happens automatically, because users (the wast majority I think) do not want to know anything about COm ports ;-)

When i connect to a wifi netwrok it connects just fine ..but the login page doesn't load and then i get the error cannot connect to login page because to many redirects occured

when i connect to wifi network the login page doesn't load and an error msg pops up sayin login page can't open because too many redirects occured and i get the same exact error msg with safari over wifi and with any application connecting to a wifi ( windows live messenger, skype, yahoo....)
can anyone help me plz??
thanks

I got the same error the other day. I'm not 100% sure what it is but I turned WiFi off, then back on again, and reconnected without the error.

EdgeSync service cannot connect to this subscription because of error "No EdgeSync credentials were found for Edge transport server

When checking Edge Synchronization on our Exchange 2010 HUB server (Test-EdgeSynchronization) I get SyncStatus "Failed". I suspect this failed after we had moved all of our Exchange 2010 servers (Except the Edge server which not member
of any domain or site) to a new site.     In hopes to resolve this, I did the following:
Removed the Edge Subscription from our HUB server using the EMC.
Deleted the cert used by ADAM on our Exchange 2010 Edge server (using the Certificates MMC).
On the Exchange 2010 Edge server created a new Edge subscription file using: “New-EdgeSubscription –FileName "C:\EdgeSubscription20150424.XML"
Restarted the "Microsoft Exchange ADAM" service on our Edge server.
Copied the "EdgeSubscription20150424.XML" to our HUB server. Then completed the New Edge subscription import on our HUB server using the MMC (specifying the AD site and location/name of the XML).
After this, I still get syncstatus failed on our HUB.   Thought to check the certificate using "Get-ExchangeCertificate | FL" but that results in: "Get-ExchangeCertificate : The Exchange Certificate operation has failed
with an exception. The error message is: Access is denied".   I tried to create a new certificate on our HUB serve using "New-ExchangeCertificate", but get the exact same "Access is denied" error message
again.
I believe we never noticed that the Edge sync wasn't working because we only use our Edge server when our hardware email filter fails (Symantec Message Gateway). Our Edge server has a lower priority in our MX record and lower priority in our send connectors
on our HUB servers. The Edge server though does receive email from internal email relay from some servers for notifications. These do get delivered unless the user mailbox is new (suspect ADAM isn't updating - that's why I started looking into
this).
This should be simple!   What am I missing???   Thanks in advance for any feedback.
PS - this is my first posting here.... I apologize if I posted this in the wrong forum or category. :)

Hi PongoDog,
Thank you for your question.
By your description, we could refer to the following steps to check if issue persist:
Remove all hub servers certificate
Create a new hub server certificate with command "New-ExchangeCertificate"
Remove the edge subscription on hub & edge server
Recreate sync subscription and import it on hub server.
If the issue persist, we could Check network connectivity between the Hub Transport server and Active Directory. Use Ping to isolate network hardware problems and incompatible configurations. Use PathPing to detect packet loss over multiple-hop trips. then
run dcdiag /s:<Domain Controller Name> at a command prompt on the Exchange Server. Use the output of Dcdiag to discover the root cause of any failures or warnings that it reports. Finally Rreview the Application log for MSExchangeADAccess and MSExchange
Topology events that could provide more information about the root cause of this event and post Event ID to
[email protected] for our troubleshooting.
If there are any questions regarding this issue, please be free to let me know.
Best Regard,
Jim
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]
Jim Xu
TechNet Community Support

I have an iPad screen that won't swipe. I cannot connect it to Itunes because it's locked with a pass code which I can't enter because I can't swipe. Any suggestions on how to fix this?

I have a 16GM Mini IPad. The screen won't swipe. I tried resetting it but that didn't work. I attempted to connect to ITunes to try a restore but I can't do that. This is because the IPad is locked with a pass code which I can't enter because I can't swipe. Does anyone have any suggestions on how to fix this?

If Ralph's suggestion doesn't work, try a Restore. Note that it's nowhere near as quick as a Reset. It could take well over an hour! Connect via cable to the computer that you use for sync. From iTunes, select the iPad/iPod and then select the Summary tab. Follow the on-screen directions for Restore and be sure to say "yes" to the backup. You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod. Again, say "yes."
At the end of the basic Restore, you will be asked if you wish to sync the iPad/iPod. As before, say "yes." Note that that sync selection will disappear and the Restore will end if you do not respond within a reasonable time. If that happens, only the apps that are part of the IOS will appear on your device. Corrective action is simple - choose manual "Sync" from the bottom right of iTunes.
If you're unable to do the Restore (or it doesn't help), go into Recovery Mode per the instructions here. You WILL lose all of your data (game scores, etc,) but, for the most part, you can redownload apps and music without being charged again. Also, if you have IOS-7, read this.

5800 XpressMusic cannot connect to PC suite becaus...

Similar Messages

Maybe you are looking for