5800 XpressMusic - Password for screen/key block

I apologise in advance if this has been asked 10000 times already, but I can't find it anywhere in the Bedienungsanleitung or here.
How can I set a code for the screen/key block so that only I can actually use my phone?
If it's somewhere on the net then just a link would be fine
Thanks in advance!
Solved!
Go to Solution.

to add to that, default lock code is 12345. Change the code in the Settings of the phone.
If you found this or someone's comments helpful or like what that person has to say, please give some Kudos to their post!

Similar Messages

  • Hi kids, my first day using apple, anyway, is a Power Book 4.1 , bought from someone else,and i dont have the password for the key chain, and no chances of getting it, the screen, for the password keeps on coming up, any ideas?

    my  first day using apple, i love it, is a power 4.1, older, but is ok to learn it, however, i bought it from someone , and i was not
    given the password for key chain, so, this screen keeps on coming up, and i dont know the password, so i keep on canceling out
    of it, ..... any ideas on how to fix this problem, is the key chain, that you can access through utilities, but i dont have the old password, that is my first
    problem
    my second problem is that the key board, closer to the screen, is coming out, as it needs to be put in place, you would imagine you can
    put it back in place, but, not sure i should mess with it, any input would be greatly appreciated it
    thank you
    lisa

    Hi, Lisa. Now I see what you're desperate about.
    Does it allow you to go ahead and use the iBook after you cancel the Keychain login? If so, it's not a big deal.
    Are you able to go to System Preferences > Accounts and create a new account for yourself? That should eliminate Keychain password problems.
    Check out these instructions on replacing the keyboard:
    http://docs.info.apple.com/article.html?artnum=111917
    Maybe they will help you get it seated better. It's considered a customer-installable part, so it should be easy enough for you to handle without worrying about goofing anything up.
    What CDs (if any) came with the iBook?
    Which version of the operating system is it running?
    How big is the hard drive and how much space remains available on it? If it's the original hard drive, it's getting very old and could fail at any time. The identifier "PowerBook 4,1" tells me that the iBook is ten years old, and is either a 500 or 600 MHz PowerPC G3 (Dual USB) iBook. As such, you can't expect a whole lot from it.
    The optical drive on this iBook could be a CD-ROM (reads CDs only), CD-RW (reads and writes CDs; no DVD capability), DVD (reads CDs and DVDs), or Combo (reads and writes CDs; reads DVDs) drive.
    Good luck with it.

  • 5800 Xpressmusic getting capacitive screen?

    Engadget are posting a rumour that the 5800 is to get revised with a capacitive screen instead of a resistive one. I'm taking this with a pinch of salt, given that the 5800 has a stylus (maybe it's just a new handset model similar to the 5800), but it's nice to hear that Nokia are considering capacitive displays now. An N97 with that display would be outrageously awesome.
    Help I'm trapped in a sig factory.

    hi there, try the Nokia Carrying Case CP-361 for 5800 XM or you could at least try to visit any nokia store near your place and try to look for alternatives

  • Copy / Paste for the key of a Wifi connection on N...

    Hello,
    It would be great to be able to paste a password for the key of a Wifi network.
    When a key is more than 60 char long and has a lot of special characters, it is really hard to type (with a numeric key because it is not possible to use  the azerty keyboard on this screen).
    Also, to be able to select some text from a Txt file would be great (so I can copy a text file in the memory card of the GSM and then I can paste it
    Is there a way to do it?
    Thank you
    Marc

    Press and hold the 'pencil' icon and at the same time, push the cursor towards the text. You'll be able to see the text being highlighted. Once you've completely highlighted the text, you'll be able to see 2 options on screen: Copy / Paste. Select 'Copy' (with your finger still pressing the 'pencil' button.) Now let go of the pencil button, and press and hold it again, then select 'Paste'
    You can even exit the application that you were in and start a new one and paste your copied text there. The text will still be stored in memory until u either select another text to copy or restart the phone.
    Was this post helpful? If so, please click on the Kudos! star to the right. Thank you!

  • I connect my Macbook 13" to my thunderbolt to display on my HD television but it keeps asking for a KeyChain password for "user-hp". My key keychain password is nothing but it does not want to accept and not display my screen to the Television. Suggestion

    I connect my Macbook 13" to my thunderbolt to display on my HD television but it keeps asking for a KeyChain password for "user-hp". My key keychain password is nothing but it does not want to accept and not display my screen to the Television. Suggestion

    Apple support article:
    Mail Keeps Asking for Password
    Maybe this will help. If you monitor the "More Like This" box (top right), other threads appear. Opening them usually displays other threads.
    https://discussions.apple.com/message/20549403#20549403

  • Screen capture on 5800 XpressMusic

    I'm currently using the ubiquitous "Best ScreenSnap" on my 5800XM. However, this only works properly as long as your screen is in portrait mode. Switch it to landscape mode and you only get part of the screen in the resulting screen capture, like this:
    So, basically, I'm wondering if anyone has come across any other software to perform a screen capture on S60v5.
    Was this post helpful? If so, please click on the white "Kudos!" star below. Thank you!
    Solved!
    Go to Solution.

    Didn't know about this app and was looking for one, so thanks for the message.  If anyone is looking for the link, it is: Best ScreenSnap.
    I tried another freeware app Screenshot for Symbian yesterday, but on the 5800 the camera button which is the default, doesn't take a snapshot but invokes the camera.  The other hot-key choices require the keypad to be up which isn't a good option for this touch-screen phone.  Maybe when I get some time I'll play around with the source code & figure out how to make it work.
    Lumia 920, Lumia 800
    Nokia N8-00 (NAM, Product Code: 059C8T6), Symbian Belle, Type RM-596, 111.030.0609
    Nokia 5800 XpressMusic (NAM, Product Code: 0577454) Software v51.2.007, Type RM-428

  • I used to have a duplicate apple id which I thought was gone but is now blocking me from updating apps,  How do I get rid of it since I no longer have a password for it?

    I used to have duplicate apple ids and I thought they got merged into one.  a few weeks ago the old one showed up in my Apps screen on my new iphone5 and is keeping me from updating all my apps and adding new ones.  I can't reset the password for it because it doesn't exist anymore.  Resetting my current apple ID has no effect on this old Apple ID and it continues to block my APPs application.  Anybody out there have a solution?  I have reset my phone more times than I can count to no avail. 

    App updates will always prompt with the Apple ID used to puchase those apps.  You also CANNOT merge Apple IDs.  What you can do:
    1) Delete those apps purchased w/ your previous Apple ID asking to be updated and purchase/download it with your current Apple ID.
    2) Contact Apple support to help you reset the password of your previous Apple ID then rename it with another email address of yours (active and shouldn't be another Apple ID) so you'll be able to do future app updates.
    3) Leave those apps not updated and just continue w/ your current Apple ID for your purchases.

  • 5800 XpressMusic Screen...

    I'm having a problem with my Nokia 5800 XpressMusic screen...
    When i turn the screen on, receive a phone call or even make a call (anything that turns the screen on) the screen blurres, when i use the buttons "blindly" for a while the screen returns back.
    I really don't know what's wrong with the screen, i don't know if the problem is with the screen or it's a software issue...
    Please if anyone can help me out.. 

    saleeeema wrote:
    I'm having a problem with my Nokia 5800 XpressMusic screen...
    When i turn the screen on, receive a phone call or even make a call (anything that turns the screen on) the screen blurres, when i use the buttons "blindly" for a while the screen returns back.
    I really don't know what's wrong with the screen, i don't know if the problem is with the screen or it's a software issue...
    Please if anyone can help me out.. 
     Take your phone to a Nokia Care Point.
    If you want to thank someone, just click on the blue star at the bottom of their post

  • Private key password for Default DemoIdentity Keystore?

    Hi
    I am trying to Configure SSL in ALSB. I have created the PKI Credential mapping for the Default DemoIdentity Keystore
    But it is asking for the password to access the Keypair.
    The document states that i need to provide the password set during the creation of the keystore
    but as i am using the default keystore i dont know where to look for the password.
    Error :
    [Security:090809|The key pair could not be retrieved from the keystore with the supplied alias demoidentity and its password
    I tried using the KeyStorePassphrase  but it didnt help me much ..
    Can any one help me on this?
    Regards
    Anusha                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                               

    Jay is right
    To be more precise you can use something like
    keytool -list -keystore ${wl_home}/server/lib/DemoTrust.jks -storepass DemoTrustKeyStorePassPhrasewhich leads to the following output
    Keystore type: JKS
    Keystore provider: SUN
    Your keystore contains 4 entries
    certgenca, Mar 22, 2002, trustedCertEntry,
    Certificate fingerprint (MD5): 8E:AB:55:50:A4:BC:06:F3:FE:C6:A9:72:1F:4F:D3:89
    wlsdemocanew2, Jan 24, 2003, trustedCertEntry,
    Certificate fingerprint (MD5): 5B:10:D5:3C:C8:53:ED:75:43:58:BF:D5:E5:96:1A:CF
    wlsdemocanew1, Jan 24, 2003, trustedCertEntry,
    Certificate fingerprint (MD5): A1:17:A1:73:9B:70:21:B9:72:85:4D:83:01:69:C8:37
    wlscertgencab, Jan 24, 2003, trustedCertEntry,
    Certificate fingerprint (MD5): A2:18:4C:E0:1C:AB:82:A7:65:86:86:03:D0:B3:D8:FEThe following list provides the location and passwords of the demo certificates:
    Trust store location: ${WL_HOME}/server/lib/DemoTrust.jks
    Trust store password: DemoTrustKeyStorePassPhrase
    Key store location: ${WL_HOME}/server/lib/DemoIdentity.jks
    Key store password: DemoIdentityKeyStorePassPhrase
    Private key password: DemoIdentityPassPhrase

  • Key password for the demonstration identity key

    Anybody know the key password for the cert in the DemoIdentity keystore.
              I know the store passphrase but I can't find the key password documented
              anywhere on BEA's web site. Anybody know the private key password?
              Grant

    Disregard this post unless you happend to know the answer. I accidentally
              posted it here when I meant to post it in the security newsgroup.
              Grant
              > Anybody know the key password for the cert in the DemoIdentity
              > keystore. I know the store passphrase but I can't find the key
              > password documented anywhere on BEA's web site. Anybody know the
              > private key password?
              >
              > Grant
              >

  • I forgot My iCloud password, and i can not reset it as the system is not accepting the answer to the security questions and also the mail to my apple ID mail box is blocked, how can i reset my password for my apple ID.

    I forgot My iCloud password, and i can not reset it as the system is not accepting the answer to the security questions and also the mail to my apple ID mail box is blocked, how can i reset my password for my apple ID.

    Hello nmssns,
    Thank you for contacting Apple Support Communities.
    You can start with this article to reset your iCloud password. Depending on your exact circumstances, blocked email, forgot security questions, etc., there are links provided to guide you through those issues.
    About Apple ID security questions
    http://support.apple.com/kb/HT5665
    Regards,
    Jeff D.

  • My Ipod touch is stuck in the password screen and I can't turn it off or cancel.  The screen that it is stuck at says :enter the password for the exchange account "exchange"

    My Ipod touch is stuck in the password screen and I can't turn it off or cancel.  The screen that it is stuck at says :enter the password for the exchange account "exchange"

    Try resetting the iPod. Nothing will be lost.
    Reset iPod touch:  Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears

  • Power on MacBook Pro takes me to login screen. All user icons appear as normal. Once I enter password for myself (administrator) spinning takes longer than normal and doesn't log in but displays a no sign

    Power on MacBook Pro takes me to login screen. All user icons appear as normal. Once I enter password for myself (administrator) spinning takes longer than normal and doesn't log in but displays a no sign (circle w line through it) when attempting to login from guest account it takes me to screen that says that the computer will restart to a safe safari system for the guest user. I waited for a longer time and the grey denim screen comes up. By the apple in left upper corner it said I think LSA? Then safari menu bar. The page it loads to us file:///System/Installation/CDIS/Mac%2005%20X%20Utilities.app/Contents/Resource s/English.iproj/GuestLoginInfirmation.html
    Can someone HELP? I'm afraid I might do something wrong

    What backups do you have?

  • I just had a new hard drive installed. After loading everything back on my computer from external drive, i came to the "select wireless network screen. I've misplaced the WEP password for my internet. Is there anyway to find it on another computer?

    i just had a new hard drive installed. After loading everything back on my computer from external drive, i came to the "select wireless network screen. I've misplaced the WEP password for my internet. Is there anyway to find it on another computer?

    Maybe. What kind of other computer are you talking about? What operating system is it running? What kind of wireless router are you using?
    Your best bet may be to just reset the router and set it up again.
    Just so you know, WEP is a very old security system for wireless and is considered insecure. If you have it available, use WPA2.

  • I have forgot my password for my lock screen what can i do to get on it?

    i have forgot my password for my lock screen, and it now says connect to iTunes but it isnt connecting i want to know how to get it on?

    2 options
    1. restore it to a backup you took before you put a password on
    2. restore it to factory settings if there was a work around then the whole password thing would be rather pointless and security would be absent

Maybe you are looking for

  • How to create a VI with multiple windows/displays?

    Hi, I'm new to LabVIEW and just trying to increase my understanding so please bear with me.I want to write a VI where the user is presented with a series of windows and depending on the button, different windows are displayed. What would be the best

  • Error Message when closing Captivate v4

    I have just started to get the below error message when I close down Captivate 4. Things seem (repeat ...seem) OK when I open Captivate again, but any error message is a worry, especially in Captivate. Does anyone have any ideas what this is all abou

  • An error message comes up on my computer when I attach ipod

    Since updating to version 9, now when I connect my ipod 'nana' I get an error msg on computer saying an error has occurred and itunes must close. I have tried unistalling itunes and other Apple applications then reinstalling but problem persists, I h

  • Copy from word and paste in Firefox

    When I copy rich text with links and stuff from word into firefox... only the plain text is pasted. So all the links and other styles don't show.

  • Unable to read big files into string object  and java.lang.OutOfMemory Prob

    Hi All, I have an application that uses applet and servlet communication. On the client side I am reading an large xml file of 12MB size (using JFileChooser) and converting the file to an string object using below code. But I am getting java.lang.Out