5800XM 3rd party s/w prob

hi friends
I have installed 3rd party 5800xm theme. After installation it si not showing my mobile menu. So i decided to change the theme, but could not as no menu is showing. So I soft reset the mobile. After that when I wanted to go to theme menu the mobile is getting swiched off every time. i cant go to the theme menu and change/ uninstall the undesired software.
Please help me..................
thanks

Download and install the latest version of PC suite from..
http://europe.nokia.com/support/product-support/pc-suites
Connect the phone to PC and open PC Suite .. goto Install Applications...
Select the Application / Themes / Games you want to remove in the Right Hand side window and then click 'Delete' (Bin icon) at the top...
BTW soft reset must have un-installed anything and everything that you had installed on the Phone Memory.

Similar Messages

Archive & Install leaves 3rd Party Apps (some with probs)

I've been on the phone with AppleCare two times about this. Here's the bottom line:
I installed Leopard (just the default upgrade) and the 10.5.1 upgrade. All was ok for a while. All programs (including 3rd party) were working. Then I took the laptop in to the Genius bar because I thought I had a battery problem and the system seemed sluggish. They ran Disk Utility from their store server which was NOT running Leopard and repaired permissions on my laptop from there. Then they ran Disk Utility from my computer (Leopard 10.5.1) and sent me on my way since the disk verified ok. Then the problems started:
1. Desktop Wallpaper was discarded and replaced by default
2. Printers disappeared and could not produce PDFs via an Adobe PDF printer
3. A 3rd party wordprocessor (Mellel) would not open existing documents and would not open a new document (no blank page, no error, nothing)
AppleCare instructed me to re-install Leopard with "Archive & Install" but warned that I would have to reinstall (most) third party programs. Trouble is, all my programs remained. The Adobe PDF printer problem was resolved, but the Mellel problem persisted. I called AppleCare again and they were perplexed as to how an Archive & Install could still have all the apps in the regular Application folder (and of course the icons in the dock too). The "Previous Systems" folder from the Archive seemed incomplete to them, so they suggested that the install was compromised somehow and to do another "Archive & Install." The goal would be to have another "Previous System" folder from the archive, and a clean Application folder with no third party software in it.
Well, 3 hours later, I have a re-installed Leopard and I still have all my applications (and of course, Mellel still does not work).
So, any suggestions out there? Are my installation disks messed up or should I go ahead and wipe the disk and start completely from scratch? I've got my library archived and my documents backed up. Anything else I should do if the recommendation is that I wipe it clean?
Karyn

OK, here is the "resolution" of the issue.
1. The issue was finally decided to be the fact that the Genius Bar used a non-Leopard system to do the Permissions Repair on a Leopard system. Apparently, 10.4 and 10.5 handle the repairs differently. Leopard actually also takes much longer. Apple Support (phone) said that 10.4 checks things differently and can alter/repair items that can make them unable to be understood by 10.5. This was the original issue which then led to me not being able to use my third party applications and to losing network settings and printer settings. Then because Apple Support kept having me do an Archive and Install preserving User settings the corrupted information kept perpetuating itself. The solution (unfortunately) was to do an Erase and Install and lose all the user settings. I called the Genius Bar at the retail location where I went last Monday to make sure they were aware of this issue so that other people do not waste as much time as I did this week on computer issues. I am mostly upset because this was a very preventable issue and I didn't need to lose so much work time right before the holidays. The Genius folks should have known better!
2. An option when doing Erase and Install is to migrate a backup from Time Machine. Since I had nothing to lose the Apple Support folks suggested that I use that option, so I tried that. I used a Time Machine backup which was prior to the issue with the Genius Bar. Unbelievably, it seems to have worked. At least I am back to just the issues (sluggishness) that I had when I started going to the Genius Bar.
Thanks for all your ideas and help in narrowing down the issue.

P7000 Tools not jogging 3rd party motor

I am trying to control a 3rd party stepper motor with P7000Tools but I can not get it to jog the motor.
Setup:
Pacific Scientific P70530 drive
MicroKinetics 23HT175 stepper motor (http://www.microkinetics.com/stepper_motors/23ht175.htm)
National Instruments 780099-01Serial Programming Cable for P70530 & P70360 Stepper Drives
tabletop variable power supply (at 30VDC and max amperage)
P7000Tools correctly finds the drive and I have the custom motor setup as:
If I "Send All" to the motor and them Probe it, the motor makes some noises at different frequencies. I also see the power supply incrementally increase in supply amerage. P7000Tools then tells me that the motor has successfully been probed. However, when I then try to jog the motor, nothing happens. I also notice that the motor gets very hot. Its at this point that I shut off the power supply. Any help would be greatly appreciated.
thanks,
jason
Solved!
Go to Solution.

tir38,
I found the following article and copied the text below. The second paragraph explains tooth count, and here's the link to the original: http://zone.ni.com/devzone/cda/tut/p/id/10638
Danaher Drives (P70530 and P70360)
Danaher refer to microstepping as step resolution. The step resolution can be configured through one of two methods. One is through the DIP switches on the side of the drives as shown in the P7000 Series Stepper Drives Getting Started manual on page 9. The other is through the Danaher P7000 Tools, a software interface to configure the hardware.
When configuring the drive using the P7000 Tools, verify that the Tooth Count is correct. This will be located under Stepper Motor»Properties. The tooth count is one fourth of the number of steps per revolution with no microstepping. If this number is not correct it can be changed in the Motor File Editor. Set the desired step resolution under Command»Command Signal Configuration»Step Resolution in Steps / Motor Rev. If the drive does not support the desired value it will coerce down to the nearest increment that is supported. All of the microstepping will then be configured on the drive.

Do we still need a 3rd party firewall ?

Since AEBS comes with a build-in firewall, should we uninstall the 3rd party firewall ? And disable the firewall in OSX altogether ?
Thanks

I've found that the new firewall in OS X Leopard is sufficient enough to protect my Macbook Pro while traveling. I have it set to "Set access to specific services and applications". When connected to the wireless SOHO I've also found the AEBS to have a very secure network firewall to protect the WLAN. Even when connected to the AEBS I still leave my Macbook Pro firewall enable so as to not forget when traveling to turn it back on. I haven't noticed any significant drop in network performance leaving it enabled while still connected to the WLAN via the AEBS. To test your firewall use free firewall test sites such as http://www.hackerwatch.org/probe/ Also if you want to encrypt your data then enable File Vault. For added security of your laptop data I'd suggest third party security tracking software such as LoJack or Undercover http://www.orbicule.com/undercover/
As for the IP address concern this is typical when visiting a website that the site you have specifically asked to visit will be able to see your IP address. You could try spoofing your address but it shouldn't be necessary and it may cause more problems when your surfing. Note: Just because the website you entered can see your IP address does not mean that your IP address is visible to a local hacker sniffing for open ports in your neighborhood. Both Leopard's firewall and the AEBS firewall allow you to set Stealth Mode so as to not broadcast your location and add an extra layer of protection making it more difficult for a hacker to crack your firewall.

HP AiO remote doesn't recognize 3rd party toner as compatible in LaserJet M1217nfw MFP

Hi,
I have a HP Envy 17 running Windows 8.1, a MacBook Air, an iPhone and a HP LaserJet M1217nfw MFP. I recently replaced the toner with a 3rd party replacement cartridge and while the printer does give me a "supply memory error" I am still able to print just fine from the Mac and my phone. I am unable however to print from my Envy. The HP All-in-One Remote app in Windows 8 gives me an "incompatible cartridge" message and says there are no solutions availble. Is there a work-around to this?
I am not very good at Windows 8....
Thanks

Hi Thaddeus,
Although the printer may resoponse to some commands, a supply memory error is an error state about the used cartridge.
Due the error message on the screen the HP AIO Remote recognize the cartridge as incompatible, that cannot be bypassed
with any settings, resolving the issue which cause the error message is the only key to resolve a such.
If the HP AiO Remote fails to print in such condition the only solution is to fully resolve the condition by following the steps listed in my previous post.
Regards,
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

3rd Party AIFF loops tempo changes from loop library and Logic session

Hi there,
Hope somebody out there can help me out!
I've recently purchased some 3rd party loops, some in AIFF and some in WAV (Which I have converted to AIFF using the Apple Loops Utility), and i have been able to get these into the logic Loop library successfully.....Or so I thought!
The problem I am having is that when previewing one of my loops it's often double the speed that the set tempo, and this will happen to ALL of my loops. But when I drag one into my session, Logic asks if it should copy over the automation data with it, click yes, and it plays fine in the arrange window. And funnily enough, all of my loops in the library start playing at the correct tempo!
Once this has all happened, i've tried quitting logic, and re-opening....but the issue just happens again....
Has anyone else had this problem, or have any idea as to what the issue may be??
Any help would be greatly appreciated!!
- Aaron

Hi there,
Hope somebody out there can help me out!
I've recently purchased some 3rd party loops, some in AIFF and some in WAV (Which I have converted to AIFF using the Apple Loops Utility), and i have been able to get these into the logic Loop library successfully.....Or so I thought!
The problem I am having is that when previewing one of my loops it's often double the speed that the set tempo, and this will happen to ALL of my loops. But when I drag one into my session, Logic asks if it should copy over the automation data with it, click yes, and it plays fine in the arrange window. And funnily enough, all of my loops in the library start playing at the correct tempo!
Once this has all happened, i've tried quitting logic, and re-opening....but the issue just happens again....
Has anyone else had this problem, or have any idea as to what the issue may be??
Any help would be greatly appreciated!!
- Aaron

How can I use a 3rd party XML parser such as xerces with OC4J ?

Hi all tech experts,
I am using Oracle Application Server 10g Release 2 (10.1.2) and i have
installed Portal and Wireless and OracleAS Infrastructure on the same
computer.
i tried all the solutions on this thread
Use of Xerces Parser in out application with Oracle App Server 9.0.4
but still fighting.
I have also posted this query on OTN on following thread
How can I use a 3rd party XML parser such as xerces with OC4J?
but no reply....
Please help me on this issue.
Since OC4J is preconfigured to use the Oracle XML parser which is xmlparserv2.jar.
i have read the following article which states that
OC4J is preconfigured to use the Oracle XML parser. The Oracle XML parser is fully JAXP 1.1 compatible and will serve the needs of applications which require JAXP functionality. This approach does not require the download, installation, and configuration of additional XML parsers.
The Oracle XML parser (xmlparserv2.jar) is configured to load as a system level library of OC4J through it's inclusion as an entry in the Class-Path entry of the oc4j.jar Manifest.mf file. This results in the Oracle XML parser being used for all common deployment and packaging situations. You are not permitted to modify the Manifest.mf file of oc4j.jar.
It must be noted that configuring OC4J to run with any additional XML parser or JDBC library is not a supported configuration. We do know customers who have managed to successfully replace the system level XML parser and the Oracle JDBC drivers that ship with the product, but we do not support this type of configuration due to the possibility of unexpected system behavior and system errors that might occur from replacing the tested and certified libraries.
If you absolutely must use an additional XML parser such as xerces, then you have to start OC4J such that the xerces.jar file is loaded at a level above the OC4J system classpath. This can be accomplished using the -Xbootclasspath flag of the JRE.
i have also run the following command
java -Xbootclasspath/a:d:\xerces\xerces.jar -jar oc4j.jar
but no success.
How could i utilize my jar's like xerces.jar and xalan.jar for parsing instead of OC4J in-built parser ?
All reply will be highly appreciated.
Thnx in advance to all.
Neeraj Sidhaye
try_catch_finally @ Y !

Hi Neeraj Sidhaye,
I am trying to deploy a sample xform application to the Oracle Application Server (10.1.3). However, I encountered the class loader issue that is similar to your stuation. I tried all the three solutions but the application is still use the Oracle xml paser class. I am wondering if you have any insight about this?
Thanks for your help.
Xingsheng Qian
iPass Inc.
Here is the error message I got.
Message:
java.lang.ClassCastException: oracle.xml.parser.v2.XMLElement
Stack Trace:
org.chiba.xml.xforms.exception.XFormsException: java.lang.ClassCastException: oracle.xml.parser.v2.XMLElement
     at org.chiba.xml.xforms.Container.dispatch(Unknown Source)
     at org.chiba.xml.xforms.Container.dispatch(Unknown Source)
     at org.chiba.xml.xforms.Container.initModels(Unknown Source)
     at org.chiba.xml.xforms.Container.init(Unknown Source)
     at org.chiba.xml.xforms.ChibaBean.init(Unknown Source)
     at org.chiba.adapter.servlet.ServletAdapter.init(ServletAdapter.java:153)
     at org.chiba.adapter.servlet.ChibaServlet.doGet(ChibaServlet.java:303)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:743)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
     at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:719)
     at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:376)
     at com.evermind.server.http.HttpRequestHandler.doProcessRequest(HttpRequestHandler.java:870)
     at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:451)
     at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:299)
     at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:187)
     at oracle.oc4j.network.ServerSocketReadHandler$SafeRunnable.run(ServerSocketReadHandler.java:260)
     at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303)
     at java.lang.Thread.run(Thread.java:595)
Caused by: java.lang.ClassCastException: oracle.xml.parser.v2.XMLElement
     at org.chiba.xml.xforms.Instance.iterateModelItems(Unknown Source)
     at org.chiba.xml.xforms.Bind.initializeModelItems(Unknown Source)
     at org.chiba.xml.xforms.Bind.init(Unknown Source)
     at org.chiba.xml.xforms.Initializer.initializeBindElements(Unknown Source)
     at org.chiba.xml.xforms.Model.modelConstruct(Unknown Source)
     at org.chiba.xml.xforms.Model.performDefault(Unknown Source)
     at org.chiba.xml.xforms.XFormsDocument.performDefault(Unknown Source)
     at org.chiba.xml.xforms.XFormsDocument.dispatchEvent(Unknown Source)
     at org.apache.xerces.dom.NodeImpl.dispatchEvent(Unknown Source)
     ... 18 more

Airplay no longer working with 3rd party after upgrading to Maverick.

I updated my MacBook Pro this week and I have noticed that the airplay icon is no longer showing up in iTunes to connect to my Denon Amplifier. The interesting thing is that my old iPad 1 that I have that is still running 5.1.1 can connect and play to the receiver just fine.
Was there an update to the airplay software that would affect 3rd party devices? I was not able to find any new updates for my receiver.

I woke up this morning with the same problem (all was fine last night). Only way to get all my mailbox folders back was to use Time Machine while in Mail, choosing the backup file from previous night and selecting EACH MAILBOX to restore (23 for me). All appears okay so far today (except some of my accessories in the menu bar are gone).
I sure hope an update comes SOON. In anticipation of Mavericks and the new MAIL I switched from Outlook 2011 3 weeks ago transfering 17,000+ files and would hate to back

Credit Memo process in 3rd party order

Hello All,
Once 3rd party invoice is completed process as follows: (standard process)
sale order --> Purchase Requisition --> Purchase Order --> Goods Receipt --> Invoice Verification --> Customer Invoice.
When you post the customer invoice to accounting, in general system will update
1.Net Value 2. COGS (Cost of goods sold) 3. Sales Qty.
Now the scenario is when the vendor cancel his original invoice and reissue the invoice (due to change in price / change in stock item and so on..),
We have to cancel the customer invoice and issue credit memo invoice (without any reference) for the customer.
But the problem here is.. when we post the credit invoice to accounting, COGS will not be updated (currently they are adjusting COGS value manually).
How can we map this scenario ? while creating credit memo invoice we should consider some reference so that COGS should be updated.

Hello Suresh,
THERE ARE TWO SCENARIOS HERE.
Scenario is when the vendor cancel his original invoice and reissue the invoice (due to change in price / change in stock item and so on..),We have to cancel the customer invoice and issue credit memo invoice (without any reference) for the customer.
> IF THE VENDOR GRANTS YOU A CREDIT MEMO ON THE QUANTITY OR VALUE BASIS, YOU CAN DIRECTLY PASS ON THIS TO CUSTOMER BY RAISING CREDIT MEMO (THIRD PARTY CREDIT MEMO IS G2S), THIS WORKS WITH ITEM CATEGORY 'TASG' (THIRD PARTY CREDIT MEMO ITEM). THE SALES RELEVANT INDICATOR ' F' IS SET IN CUSTOMISING FOR SALES FOR THIS ITEM CATEGORY. THIS MEANS THAT THE COST IS NOT CREATED.
--->IF THE VENDOR CALCULATES ADDITIONAL COSTS FOR YOU ONCE THE THIRD PARTY BUSINESS TRANSACTIONS HAVE ALREADY BEEN BILLED. THE COSTS FROM THE INVOICE RECEIPT ARE THEN CORRECTED IN THE CUSTOMER BILLING DOCUMENT WHICH HAVE ALREADY BEEN CREATED. SUBSEQUENT DEBITS FROM THE INVOICE RECEIPTS ARE COPIED TO PROFITABILITY ANALYSIS AS A DIFFERENCE AMOUNT. THIS MEANS THAT THE COST IS UPDATED HERE ALSO. IN ACCRUED PROFITABILITY ANALYSIS, THE COSTS ARE NOT COPIED FROM THE INVOICE RECEIPT, BUT FROM THE CUSTOMER BILLING DOCUMENT.
EXAMPLE:In the context of a third-party business transaction, you create a sales order for over 100 pieces.
A purchase requisition and a purchase order are generated. Ten pieces are delivered to the customer, and a billing document is then sent to the customer when the 10 pieces are delivered. The vendor sets a subsequent debit of 100 USD for shipping costs in the invoice. The cost is nowupdated in the billing document created, and in the profitability analysis (in this case, it is raised
by 100 USD).

3rd party signature handler set in Adobe Acrobat 9 Professional Extended gets reset

Hi All,
I have got a 3rd party digital signature creating plug-in i.e. MySign . I have set it inside 'Preference > Security > Advanced Preferences > Creation > Default Method to Use when Signing and Encrypting Documents' > MySign. If I restart Adobe Acrobat that setting is lost and the Adobe Default Security handler is then used.
I don't want to set handler manually every time I restart Adobe Acrobat. I have figured out that Adobe Acrobat is creating a registry entry named aPrivKey against that inside cHandlers BUT it gets removed on Adobe restart if I set MySign as the handler in the first place.
Similarly I want the same handler to verify signatures. For that I have set 'Preferences > Security > Advanced Preferences > Verification > Always use the default method (overrides the document-specified method)' along with the name of handler i.e MySign but on restart of Adobe, this is also gets reset.
Any idea how to set my handler as default to sign & verify without getting it reset?
Regards,
Wahaj

Hi All,
I checked with Adobe X and this issue is not present there.
Regards,
Wahaj

Adobe Muse form with 3rd party host is not working

I have uploaded a form with Adobe Muse to a 3rd party host. Upon testing the link scripts/form_check.php, I see 3 green checkmarks. Upon testing the form, the form appears to submit successfully, however I never receive the email.
I checked with the hosting company and this is what they said:
...this form is using localhost smtp of webserver which was stopped due to spamming issues...actually, localhost doesn't have proper rDNS record and the return path for all mails is the server itself, so whenever a client uses its domain for spamming the server's mail queue gets choked and creates issues for others. So we generally do not open localhost smtp and recommend users to use proper SMTP Authentication so that each mail will be delivered and won't create issues for server even if someone does spamming because in that case all mails will bounce back to the mailbox. So, we recommend you to use smtp authentication in the form and use proper smtp details to send mail.
Please provide a recommendation on what I should do to resolve this? Is there a way to modify the form so that it uses proper SMTP Authentication instead of Localhost?

Hi
Please refer to this document :
https://forums.adobe.com/docs/DOC-3581
Thanks,
Sanjit

Service desk integration with 3rd party tool

Hi all,
I've problems understanding the setup of connecting a 3rd party service desk tool with solman itsm.
So far it's clear that I need to activate and configure the service provider and consumer in soamanager.
The webservice then will be called by the 3rd party tool with corresponding data.
However, according to spro I need to define a value mapping for incoming/outgoing calls.
I do not understand this mapping... the WSDL of webservice ICT_SERVICE_DESK_API contains lots of fields, but in spro -> value mapping I can only define the following fields (which are hard coded in type pool AIICT):
SAPCategory
SAPComponent
SAPDatabase
SAPFrontend
SAPIncidentID
SAPIncidentStatus
SAPInstNo
SAPOperatingSystem
SAPSoftwareComponent
SAPSoftwareComponentPatch
SAPSoftwareComponentRelease
SAPSubject
SAPSystemClient
SAPSystemID
SAPSystemType
SAPUserStatus
What about attachments, priority etc.?
Will the interface parameters mapped to these ones?
For what purpose do I need to maintain the value mapping?
Can you give me a hint?
Regards, Richard Pietsch

can you please check the WIKI Solution manager Service Desk Integration with third party service desk - SAP Solution Manager - Security and Authorizat…

Using 3rd party binary in script that is run as job

Hi all,
I have several scripts to do various tasks with IIS logs we receive from all our various web servers. One script unzips logs, another logparses to grab a few fields then sftp to a 3rd party for analysis, another will encrypt the original zip files
in prep for ftp to 3rd party, another will ftp to that 3rd party, and yet another will analyse the logs with our in house analytiscs application.
I want to have a master script that will run these other scripts as jobs so that it will control when to start certain scripts based on the state of the jobs. It all seemed to work great as I was setting up test jobs, until I added '3rd' party executables
like 7-zip, ftp.exe, winscp, etc... The jobs would just go to failed state when they hit the executables.
That's not my current problem though as I found out that if I used the
-windowstyle hidden option for start-process then everything ran as expected, that is until I wanted to log output from the 3rd party app. FTP for example.
I tried this:
$ftpexe = "C:\windows\System32\ftp.exe"
$ftpscr="d:\scripts\ftpscrtmp.txt"
"open 111.1.1.1`r`nSomeFTPuser`r`nSomepassword <..bunch of other ftp commands>" | Out-File -FilePath $ftpscr -Append -Encoding "ASCII"
start-process -wait -filepath $ftpexe -argumentlist $ftparglist -RedirectStandardOutput $ftplog -windowstyle hidden
However, asking powershell to redirect output of a hidden window was probably like asking someone to cover their eyes and read a book and it let me know it.
I have tried without using -windowstyle hidden and not having any luck. I want to capture the output of the ftp commands so that I can make sure the file was transferred successfully. If I run the script without -windowstyle hidden and not as
a job it works, and I can test the output. I really want to be able to run this script as a job AND get the output of the ftp to a file... advice?
Thanks in advance!

This works with no problem for me.
Start-Process -wait -filepath ftp.exe -argumentlist '-s:c:\scripts\ftpcmd.txt' -RedirectStandardOutput c:\scripts\ftp.log
I get no window and the file gets written.
This is my ftp command file:
open ftp.microsoft.com
anonymous
[email protected]
ls
bye
¯\_(ツ)_/¯

IPhone 5 32GB echo voice during 3rd party call reject

Dear all,
Have anyone experience echoing voice especially for iPhone 32GB during 3rd party call reject? (Doesn't happen to 16GB and 64GB)
During phone call if the other party rejects the call, you could hear echo background voice right after the busy tone.
Appreciate if someone could share some joy in solving this very annoying problem. Have tried restoring and setting up as new phone both with negative result. Currently running 6.1.3.
Best regards,
MW

Having the same issue with a 4S

How do I pair a bluetooth headset when my MAC doesn't recognize it? The hedset work properly because they are paired with my iPhone. The headset is not an Apple product. It'd 3rd party.

How do I pair a bluetooth headset when my MAC doesn't recognize it? The hedset work properly because they are paired with my iPhone. The headset is not an Apple product. It'd 3rd party.

Ask the headset manufacturer.
Barry

5800XM 3rd party s/w prob

Similar Messages

Maybe you are looking for