5800xm Changing IP adress every 1/2 seconds

I have problem with my phone, when im connecting by any browser, opera mobile/mini/or software one, i got my IP changing every 1-2 seconds, its always range (in ex. 212.2.99.200-205 so there is changing only lust number), i checked the sim card on other phone and there is no such a problem, it has static IP during one connection, so I`m asking where could be a problem, in config i have only access point configured, as provider told me. No password, username, proxy etc.

Hi, You also need to chage hostname in /etc/net/tic*/hosts and /etc/nodename. In /etc/smb.conf , change any entries that referred to this host by hostname/ip . You'll need to restart smbd and nmbd. You should also restart inetd. The best thing to do is reboot the machine after the changes are made.
HTH

Similar Messages

  • HP PSC3210 changes IP adress every few days or loses IP adress.

    Hi all,
    There is a problem that is bothering me. With more than 10 years of PC and ome network building experience, this one's a pain in the ass. The situation is as follows. A HP Photosmart PSC3210 is connected with a network cable to a router. The router has wireless functionality and a few laptop computers running Windows 7 and/or Windows XP are the clients for the printer. This has always worked perfectly. A few months ago the ISP replaced the router and suddenly, the printer could not be found by the clients. It appeared that the printer IP adress had changed, however DHCP lease time in the router is set to Forever. I fixed the problem by changing the settings in the client PC's and everything was ok again. A few days later - same problem! It appeard now that the printer had lost the IP adress, changed to 169.xxx.xxx.xxx . Reset the network settings, problem solved.
    This situation is going on for a few months now. Client PC's have all been reinstalled with OS. I even replaced the original Zyxel router with a cheap Belkin router I use as a spare. Same problem! Closer monitoring learned that when the printer receives a printing order, it drops oud of the router DHCP list and thus loses the IP adress. This makes no sense? Of course the UTP Cat5 cable from the printer to the router was replaced. Even more, I switched the clients PSC3210 with my own, identical machine! Now the clients machine works at my home for weeks without problems. And my machine works at the clients home with the same problems that I mentioned before.
    I really can't get my head around this and I would appreciate any help from you guys!
    Thanks a lot!
    Thomas

    Hello thwbaur.
    Maybe you can try setting a static IP address to the printer. For this, you simply need to enter the EWS of the printer by typing its IP address in a web browser, then go to Network and set a static IP address.
    Cheers!!
    Wixma.
    I am an HP employee.
    Say thanks by clicking the Kudos star in the post.
    If my reply resolved your problem, please mark it as as Accepted Solution so that it can be found easier by other people.

  • Change Desktop picture every 5 seconds?

    What is the opinion of the learned on setting the desktop picture in "Desktop and Screensaver" System Prefs to change the picture every 5 seconds? Is this a bad idea, and if so why? I cannot find anything from Apple that discourages doing it and obviously they make it available for the user to set the Pref such that you can do it. TIA

    I suppose, but it does not decrease the performance that I can tell. I am sure it would if I were to measure it. That System Preference is stock with that computer (Panther 10.3.9).

  • Firefox v15 and up cause my computer (MAC OSX 10.8.2) to freeze for about 30 seconds every 15-30 seconds and forces me to turn it off with the power button

    Firefox v15 and up cause my computer (MAC OSX 10.8.2) to freeze for about 30 seconds every 15-30 seconds and forces me to turn it off with the power button. It only causes this after I have opened Firefox, my computer runs fine before opening Firefox. I have uninstalled Firefox and cleared my personal settings. I have installed future updates (16 and 17) and have run into the same issue. I cannot pull any information on RAM or CPU usage because when it happens it makes my computer unusable. Unfortunately I need to use FF for work and can't. I have tried the different responses on the forums to reduce the amount of RAM and CPU usage with no change in performance.

    Duplicate of https://support.mozilla.org/en-US/questions/944207

  • IPad 4G 16GB in stand-by shows lockscreen every 10-60 seconds

    Hello
    We've just purchased 5 new iPads 4G 14GB for business use. They all are configured from the same backup with completly identical Software, every iPad with iOS 5.1.1.
    One of them continiously show's the lockscreen every 10-60 seconds for some seconds, if it isn't connected to a power supply. I've tried many things, turned it in Flight Mode, tried to find something in the console-log, tried to reboot, then tried to reset it with Home/Sleep-Button, removed the case, changed location (I'm now 25km away), disabled «iPad Cover Lock/Unlock». All apps in Notification-Center are disabled.
    I also think, that this behavior was BEFORE I made any change on the iPad, in factory mode out of the box.
    Hope anyone can help me… :-)
    - Martin

    By it's very nature, 5G is not as reliable as 2.4G, especially if you're transmitting through walls or, worse, ceilings/floors.  What is your objection to using 2.4G?

  • My account asks me to change my password every week for no reason and i have different security questions for the same account

    My account asks me to change my password every week for no reason and i have different security questions for the same account

    Does the iPod connect to other networks?
    Does the iPod see the network?
    Any error messages?
    Do other devices now connect?
    Did the iPod connect before?
    Try the following to rule out a software problem:                 
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Power off and then back on the router
    - Reset network settings: Settings>General>Reset>Reset Network Settings
    - iOS: Troubleshooting Wi-Fi networks and connections
    - Wi-Fi: Unable to connect to an 802.11n Wi-Fi network
    - iOS: Recommended settings for Wi-Fi routers and access points
    - Try changing the security on the router. Start with no securty as a test.
    - Restore from backup. See:
    iOS: How to back up
    - Restore to factory settings/new iOS device.
    If still problem make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
    Apple Retail Store - Genius Bar

  • HP laserJet 1022n How can I change IP adress?

    HP laserJet 1022n How can I change IP adress?

    It is advisable to set a static IP address for the printer:
    - Print a Network Config Page from the front of the printer. Note the printer's IP address.
    - Type that IP address into a browser to reveal the printer's internal settings.
    - Choose the Networking tab, then Wireless along the left side, then the IPv4 tab.
    - On this screen you want to set a Manual IP. You need to set an IP address outside the range that the router automatically sets (called the DHCP range). If you do not know the range, change the last set of numbers (those after the last '.') to 250
    - Use 255.255.255.0 for the subnet (unless you know it is different, if so, use that)
    - Enter your router's IP (on the Network Config Page) for the gateway.
    - Enter 8.8.8.8 for the first DNS and 8.8.4.4 for the second DNS.
    - Click 'Apply'.
    Now, shut down the router and printer, start the router, wait, then start the printer.
    After this you may need to redo 'Add a Printer' using the new IP address.
    Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
    I am employed by HP

  • Audio cuts out and video "freezes" every 10-15 seconds

    So I recently switched to Verizon (about 2 weeks ago) for internet and tv.  After about a week (with no video or audio issues), I decided that I wanted to get a DVR.  So they shipped me a DVR Set Top Box - model is CHS 435HDC.
    When watching live TV the problem isnt THAT bad...every 1-2 minutes the audio will cut out and the video will pixelate for about 1 second, and then it continues right along.
    When watching a TV show that I recorded on the DVR it is REALLY bad...basically unwatchable.  The audio and video will cut out briefly every 10-15 seconds, then it continues along normally for another 10 seconds or so then it cuts out for a second and continues again.
    Obviously I'm going to ask for a different DVR to be sent to me but if it happens again with the next box I may just cancel and switch back to the "other guy".  This is a pretty bad start to what I thought would be a new and better experience.  (Im not even going to go into the horrible on-demand menu system.)
    Wondering if anyone else has experienced this problem before with their DVR?
    Thanks!
    (Dont know if it matters but I am in Maryland)
    Solved!
    Go to Solution.

    Generally but not always pixelation and picture break up is an issue with the signal to the set top box. Sometimes it's as simple as a loose coax cable, or the connector has come loose from the cable itself. There are other causes, but those are the easiest to start checking. I have sent you a private message to your forums inbox.
    Lee_vz
    Verizon Support
    Notice: Content posted by Verizon employees is meant to be informational and does not supersede or change the Verizon Forums User Guidelines or Terms or Service, or your Customer Agreement Terms and Conditions or Plan.

  • My Radio on my Nano won't pick up a signal.. I cennected my headphones and am in the middle of the city. Also my iPod keeps pausing every like 30 seconds.. What do I do?

    My Radio on my Nano won't pick up a signal.. I cennected my headphones and am in the middle of the city, so there are plenty of stations to find. Also my iPod keeps pausing every like 30 seconds when I try to listen to my music. I just got it for Christmas and already loaded it with songs.. What do I do?

    Push the headphone jack all the way in, you don't have it fully plugged in yet.

  • HT2478 how do you make the setting to change desktop background every time you shut down your mac

    how to make setting to change desktop background every time you close your mac
    because i want to make it if anybody tries to change my dekstop picture i want it to go backto set desktop picture

    Don't let other people access your Mac in admin mode - they might change something a lot more important than the Desktop picture.
    However you can use Automator: create an Application in it, and select 'Set the Desktop Picture' from the Library. Choose the picture you want. Save the application, then go to System Preferences>Accounts>Login Items and select the Automator application you just created. This will then run at startup and set your chosen picture.

  • When  i play a song from my itunes library, there is a short "buzzing" sound about every 20-30 seconds. I had the problem before and thought it was fixed after verifying that itunes was my default player. Any ideas to fix the problem now??

    when i play a song from my itunes library, there is a short "buzzing" sound about every 20-30 seconds. This same thing happened some time ago, and i thought i had it sovled by verifying that itunes was my default player. Howerver, it has started up again. Any ideas how to fix the problem??

    I am having the same problem I have over 11.5 GB of .tmp files, many 1000s. Here is a thread I have found with some more info:
    http://discussions.apple.com/thread.jspa?messageID=824308
    That thread is almost a year old so I'm not holding out hope for a fix from apple. I'm going to try deleting them and see how it goes...

  • IPod Mini continually skips tracks all the time every half a second!

    My iPod Mini continually skips tracks all the time every half a second. The only thing that stops it is if you press pause but once you press play off it goes again. This means noi music is able to be played because it's always skipping. The menu button works as does the backlight if you hold the menu button down. The enter button works and the touch pad navigation also works. Both skip buttons have no effect on the unstoppable skipping. Can anybody help or at least verify the problem with other users of simular problems and if they were able to fix them simply, without having to go to an Apple dealer (it's out of warrenty i think)Any help would be appreciated.

    My iPod Mini continually skips tracks all the time
    every half a second. The only thing that stops it is
    if you press pause but once you press play off it
    goes again. This means noi music is able to be played
    because it's always skipping. The menu button works
    as does the backlight if you hold the menu button
    down. The enter button works and the touch pad
    navigation also works. Both skip buttons have no
    effect on the unstoppable skipping. Can anybody help
    or at least verify the problem with other users of
    simular problems and if they were able to fix them
    simply, without having to go to an Apple dealer (it's
    out of warrenty i think)Any help would be appreciated.
    ---thats what happened to mine, then it stopped working altogether. liek not playing songs at ALL. i have tryed reformating it, i finally got all the settings erased, but then it woulndt 'talk' to iTunes. it has been about 2 months and im still working on it. my suggestion is send it in beore it gets as bad as mine.
    good luck!
    -adair
    no idea 1123   Windows XP   haha
      Windows XP  

  • How to change IP adress of wireless controller 2504 . from GUI

    how to change IP adress of wireless controller 2504 . from GUI 

    In the existing setup, does WLC management & APs are on the same vlan ? If that is the case you may have not configured any of the below, as AP L3 broadcast reach WLC & in that way AP will learn about WLC.
    If WLC & APs are on different vlan you may already use one of WLC discovery method listed below.
    1. DHCP Option 43
    2. DNS
    3. UDP broadcast forwarding
    4. Static configuration
    When you change the WLC management IP address, AP need to know what is the new IP & you can modify the configuration of the method you used.
    HTH
    Rasika
    **** Pls rate all useful responses ****

  • Change desktop background every N minutes broken

    so i posted about this before, where i had my background set to change every 5 minutes, but it would happen more often. i was recommended to delete and rebuild the the particular plist controlling this... thought it did the trick, but now i've changed it to every 15 minutes, and it still changes every 3-4 minutes.

    there is only one advice to give in this situation - rebuild that plist again.
    Delete the file homedirectory/Library/Preferences/com.apple.desktop.plist and log out/in.

  • Airtunes drops out every 15-30 seconds?

    Any advice?
    As of yesterday, my airport express connected to my stereo stops playing music every 15-30 seconds.
    Very annoying!
    Did a factory reset and still having the problem.
    Any hints?

    Sorted itself out after software upgrades at a later date

Maybe you are looking for