5800xm doing annoying things when calling...

Does anyone know if you can disable the stupid messages the phones tells you about? Whenever I make a call when my data connection is active (which is all the time so I can get live email updates) it disables my data connection, which is ok, I understand that much. What I don't understand is the fact it needs to tell me every single time it does it... just once would have done! So say if I am calling someone and it goes to answer phone, I can't hang up because there is a stupid message telling me that my data connection has been disabled and I end up leaving a message on the answer machine of me shouting profanities at the stupid message informing me of the obvious!
So yeah after a rant, anyone know if its able to be gotten rid of?

Try cleaning out the dock connecter with a dry toothbrush. It sounds like a number of your problems could be caused by some kind of conductive grit in interfering with the dock connector and shorting some of the pins. The popup about accessories not being supported is a dead giveaway. This may correct many of your problems altogether.
The sluggish response time may just be due to the fact that it's a 3G. I suffered the same sluggishness on my 3G, as does my wife currently (I already upgraded to an iP4, she's waiting till fall so she can one up me).
The problem with music starting when you have the headphones plugged in may be the dirty dock connector or the headphones themselves. I've been through several sets of headphones over the years because of strange behavior. It's just the nature of the beast.
Good luck
Hope this helps

Similar Messages

Phone does not ring when called any suggestions

Iphone4 does not ring when called. Any suggestions?

Is the silent switch on?
Does the ringer not sound or does the call not come through at all?
Can you make outgoing calls?

My iPhone 5 keeps typing letters in messages and doing random things when not even touching my phone.

My iPhone 5 keeps typing letters in messages and doing random things when not even touching my phone.

Do a reset press& hold power button&a menu button hold both down wait for Apple Logo you will not lose any data
that should solve the problem.
bsydd uk

Have an iPhone 5. Phone does not ring when calls come in and texts sent from non-iPhones are delayed by 4-5 hours before receiving.

Have an iPhone 5. Phone does not ring when calls come in and texts sent from non-iPhones are delayed by 4-5 hours before receiving.

This morning I woke up thinking that I should turn off my iPhone and then call it from a land line. If the problem is the network then there would be a delay before I heard ringing.
I turned my iPhone off and called it. Right away I heard my message.
I turned my iPhone back on and called it. It rang right away!
So, did Virgin Mobile fix the problem or did turning my iPhone off fix the problem?
I don't know, but I'll take either. I do know that Virgin Mobile said it would be four days to check the problem. Did the problem get fixed yesterday when the four business days were up. I do know that I've had my iPhone on for a long, long time. Did upgrading to 6.1.1 or 6.1.2 cause the problem and turning my iPhone off reset my iPhone?
If you have delayed ringing problem and turning your iPhone off and on again resolved it, please post a note here.
P.S. I did call Virgin Mobile and its records show the investigation is still open. I hope my points get passed on to the investigators.
P.P.S. Reading my notes, I had turned my iPhone off and on last week. Maybe it's all the phase of the moon.

IPad does crazy things when not touched

Basically, I'll be going along on an app or on safari or anything and then randomly my iPad will just start doing crazy things, and I can't do anything. So for example, I'll be on safari and then my iPad will scroll up to the top of the page, type in the address bar some random numbers and letters and just keep doing that. And then the only way (sometimes) to stop it is to lock the screen, but sometimes that doesn't even work and I then can't even unlock the iPad for a few seconds. I've tried restoring it but that doesn't do anything. Is there anything else I could try or should I just take it to a genius bar?

You may need to get it back to Apple, but this is worth a try if you haven't done it already.
Try a hard reset by pressing and holding down on the sleep button at the top of the iPad while holding down on the home button at the bottom, until the Apple logo appears and the iPad restarts. Launch any app, surf the net, whatever, and see what happens.

Caller ID does not work when calling from Jabber

We have the following results when doing calls within the company:
Desk Phone A (4567-X-Smith): 7801234567
Desk Phone B (4568-Y-Miller): 7801234568
Main Company Line: 7801230000
All desk phones have the following type of configuration:
Under the phone -> Line[1] -> Line1 on Device <MAC>
Display (Internal Caller ID): 4567-X-Smith
ASCII Display (Internal Caller ID): Our Company Name
Line Text Label: 780-123-4567
ASCII Line Text Label: 780-123-4567
External Phone Number Mask: 7801230000
Desk Phone A calls Desk Phone B
- caller ID shows up properly on Desk Phone B as 4567-X-Smith
User at Desk Phone A makes the call through the Jabber client to Desk Phone B
- caller ID shows up as 7801230000
This last situation is the problem since we want all internal calls whether they're form the desk phone or Jabber to show the proper caller ID. However, we want the generic main company line (7801230000) to show up to anybody outside the company. What is set incorrectly? Why does Jabber take over the line but not keep the same caller ID settings? Does jabber work as if it's doing an external call?
Thanks in advance,
Kris

Interesting... I just 4-digit dialed 8182 (typed in the Search field at the top of the jabber window) and my proper caller ID showed up...
Next I tried 10 digit dial 7804988182 through jabber and it showed 7804988100 (our external calling mask). I also just noiced that it very briefly flashes 97804988182 so that seems to indicate it's trying to dial through the PSTN...
Oddly enough, if I 10 digit dial through my desk phone, it shows the proper caller ID.

Why is UTL_DBWS is doing a POST when calling a webservice??

Hi everyone,
I was testing the UTL_DBWS package with a 10.2.0.2.0 database to get a call to a webservice on an Oracle AS. My PL/SQL code is like this:
declare
l_service sys.UTL_DBWS.service;
l_call sys.UTL_DBWS.call;
l_result ANYDATA;
l_wsdl_url VARCHAR2(1024);
l_service_name VARCHAR2(200);
l_operation_name VARCHAR2(200);
l_input_params sys.UTL_DBWS.anydata_list;
reti          pls_integer;
BEGIN
l_wsdl_url := 'http://localhost:8099/JMSService?wsdl';
l_service_name := 'JMSService';
l_operation_name := 'sendTextMsg';
l_service := sys.UTL_DBWS.create_service (
wsdl_document_location => URIFACTORY.getURI(l_wsdl_url),
service_name => l_service_name);
l_call := sys.UTL_DBWS.create_call (
service_handle => l_service,
port_name => null,
operation_name => l_operation_name);
sys.utl_dbws.set_property(l_call, 'ENCODINGSTYLE_URI', 'http://schemas.xmlsoap.org/soap/encoding/');
sys.utl_dbws.set_property(l_call, 'OPERATION_STYLE', 'rpc');
sys.utl_dbws.set_target_endpoint_address(l_call, 'http://localhost:8099/JMSService');
l_input_params(1) := ANYDATA.ConvertVarchar2('a');
l_input_params(2) := ANYDATA.ConvertVarchar2('a');
l_input_params(3) := ANYDATA.ConvertVarchar2('just a test');
l_result := sys.UTL_DBWS.invoke (
call_handle => l_call,
input_params => l_input_params
sys.UTL_DBWS.release_call (call_handle => l_call);
sys.UTL_DBWS.release_service (service_handle => l_service);
dbms_output.put_line( ANYDATA.AccessNumber(l_result));
dbms_output.put_line('DONE');
EXCEPTION
WHEN OTHERS THEN
dbms_output.put_line('ERROR');
dbms_output.put_line(SQLERRM);
END;
The code was published in some official example but I'm getting the following error message:
===> Invocation (a[class java.lang.String],a[class java.lang.String],just a test[class java.lang.String])
HTTP transport error: javax.xml.soap.SOAPException: java.security.PrivilegedActionException: javax.xml.soap.SOAPException: Bad response: 405 Method Not Allowed
     at oracle.j2ee.ws.client.http.HttpClientTransport.invokeImpl(Unknown Source)
     at oracle.j2ee.ws.client.http.HttpClientTransport.invoke(Unknown Source)
     at oracle.j2ee.ws.client.StreamingSender._sendImpl(StreamingSender.java:165)
     at oracle.j2ee.ws.client.StreamingSender._send(StreamingSender.java:110)
     at oracle.j2ee.ws.client.dii.CallInvokerImpl.doInvoke(CallInvokerImpl.java:87)
     at oracle.j2ee.ws.client.dii.BasicCall.invoke(BasicCall.java:546)
     at oracle.jpub.runtime.dbws.DbwsProxy$CallProxy.invokeProxy(Unknown Source)
     at oracle.jpub.runtime.dbws.DbwsProxy$CallProxy.access$2500(Unknown Source)
     at oracle.jpub.runtime.dbws.DbwsProxy.invokeProxy(Unknown Source)
CAUSE:
javax.xml.soap.SOAPException: java.security.PrivilegedActionException: javax.xml.soap.SOAPException: Bad response: 405 Method Not Allowed
     at oracle.j2ee.ws.client.http.HttpClientTransport.invokeImpl(Unknown Source)
I analyzed the traffic in the jdeveloper's http monitor and found out, that obviously the UTL_DBWS package sends a POST request but it should be GET, because the oracle AS responses that POST is not allowed with my webservice. If you use the AS' web interface to invoke the webservice, a GET is generated.
Now, does anyone know about that or how I can configure UTL_DBWS to send GET requests?
thanks in advance
Steffen
ps: apparently it doesn't matter whether the webservice is returning some data or not

Hi everyone,
I was testing the UTL_DBWS package with a 10.2.0.2.0 database to get a call to a webservice on an Oracle AS. My PL/SQL code is like this:
declare
l_service sys.UTL_DBWS.service;
l_call sys.UTL_DBWS.call;
l_result ANYDATA;
l_wsdl_url VARCHAR2(1024);
l_service_name VARCHAR2(200);
l_operation_name VARCHAR2(200);
l_input_params sys.UTL_DBWS.anydata_list;
reti          pls_integer;
BEGIN
l_wsdl_url := 'http://localhost:8099/JMSService?wsdl';
l_service_name := 'JMSService';
l_operation_name := 'sendTextMsg';
l_service := sys.UTL_DBWS.create_service (
wsdl_document_location => URIFACTORY.getURI(l_wsdl_url),
service_name => l_service_name);
l_call := sys.UTL_DBWS.create_call (
service_handle => l_service,
port_name => null,
operation_name => l_operation_name);
sys.utl_dbws.set_property(l_call, 'ENCODINGSTYLE_URI', 'http://schemas.xmlsoap.org/soap/encoding/');
sys.utl_dbws.set_property(l_call, 'OPERATION_STYLE', 'rpc');
sys.utl_dbws.set_target_endpoint_address(l_call, 'http://localhost:8099/JMSService');
l_input_params(1) := ANYDATA.ConvertVarchar2('a');
l_input_params(2) := ANYDATA.ConvertVarchar2('a');
l_input_params(3) := ANYDATA.ConvertVarchar2('just a test');
l_result := sys.UTL_DBWS.invoke (
call_handle => l_call,
input_params => l_input_params
sys.UTL_DBWS.release_call (call_handle => l_call);
sys.UTL_DBWS.release_service (service_handle => l_service);
dbms_output.put_line( ANYDATA.AccessNumber(l_result));
dbms_output.put_line('DONE');
EXCEPTION
WHEN OTHERS THEN
dbms_output.put_line('ERROR');
dbms_output.put_line(SQLERRM);
END;
The code was published in some official example but I'm getting the following error message:
===> Invocation (a[class java.lang.String],a[class java.lang.String],just a test[class java.lang.String])
HTTP transport error: javax.xml.soap.SOAPException: java.security.PrivilegedActionException: javax.xml.soap.SOAPException: Bad response: 405 Method Not Allowed
     at oracle.j2ee.ws.client.http.HttpClientTransport.invokeImpl(Unknown Source)
     at oracle.j2ee.ws.client.http.HttpClientTransport.invoke(Unknown Source)
     at oracle.j2ee.ws.client.StreamingSender._sendImpl(StreamingSender.java:165)
     at oracle.j2ee.ws.client.StreamingSender._send(StreamingSender.java:110)
     at oracle.j2ee.ws.client.dii.CallInvokerImpl.doInvoke(CallInvokerImpl.java:87)
     at oracle.j2ee.ws.client.dii.BasicCall.invoke(BasicCall.java:546)
     at oracle.jpub.runtime.dbws.DbwsProxy$CallProxy.invokeProxy(Unknown Source)
     at oracle.jpub.runtime.dbws.DbwsProxy$CallProxy.access$2500(Unknown Source)
     at oracle.jpub.runtime.dbws.DbwsProxy.invokeProxy(Unknown Source)
CAUSE:
javax.xml.soap.SOAPException: java.security.PrivilegedActionException: javax.xml.soap.SOAPException: Bad response: 405 Method Not Allowed
     at oracle.j2ee.ws.client.http.HttpClientTransport.invokeImpl(Unknown Source)
I analyzed the traffic in the jdeveloper's http monitor and found out, that obviously the UTL_DBWS package sends a POST request but it should be GET, because the oracle AS responses that POST is not allowed with my webservice. If you use the AS' web interface to invoke the webservice, a GET is generated.
Now, does anyone know about that or how I can configure UTL_DBWS to send GET requests?
thanks in advance
Steffen
ps: apparently it doesn't matter whether the webservice is returning some data or not

FaceTime on Mac (Yosemite) does not connect when calling an IOS device

Hi all,
Since my upgrade with Yosemite, I seem to be having issues with FaceTime (video/audio) calling iOS Devices. iMessage works just fine with Yosemite. But when i attempt to call the other party via FaceTime, i could hear it ring but cannot connect. Anybody else who has the same issue and does anybody know how to fix it? It would seem to be a Yosemite issue, because when i tried using my iPad and iPhone to call via FaceTime, it works just fine using the same Apple Id i used for the Macbook Pro (Mid 2010). But when I use my Mac to call the iPhone.. It rings but it does not connect.. I hope they fix this with the next update..

For the ones who are interested: the problem has been "solved".
Solution: none. I found out that the iPhone 4 from my girlfriend caused the problem. The iPhone made it impossible to FaceTime to each other from iPhone <> MacBook Pro. I think it's because the discontinued iOS support for the iPhone 4.
Since she has the iPhone 6 FaceTime now works wonderful without any problem.

Dialog Box does not function when called a second time

I have created a dialog box that only seems to work once in a larger application. The box is designed to be a MatLab code debugger. My idea was to allow a user to interactively create/debug Matlab code from LabView using ActiveX automation. Anyway, I have created a test vi that uses this dialog box twice. The first time it is called it functions as expected, but the second time nothing on the front panel (of the dialog box) responds and I cannot close the window or interrupt the vi. I am using LabVIEW 7.0 on Windows 98. Please see the attached vi's. MatlabDebugger.vi is the dialog that's causing the problem. Matlabx2.vi is the sub vi that handles the ActiveX automation. Debuggertest.vi is the test v
i in which the dialog will not word a second time.
Thanks in advance for any help or suggestions.
Attachments:
Debuggertest.vi ‏51 KB
MatlabDebugger.vi ‏303 KB
Matlabx2.vi ‏361 KB

The problem is caused by the nested event structures; you have an event structure inside an event structure, acting on the same controls. When the main one reacts to the cancel the other one get's stuck...so on the next call the main event structure just halts due to the stuck event structure inside it. It's not obvious why this is a fault, you may be able to spot it now that you're on the track though.
MTO

Ringtone successfully loaded onto phone but does not play when called

Hello forum!
I successfully purchased a ringtone, re-authorized my account, and loaded the tune onto my iPhone. Settings shows that I have selected this as my new ringtone, and the phone plays it back to me when I adjust the volume, &c, but whenever anyone calls me "Marimba" is played instead.
What's the deal here? Any suggestions?
Message was edited by: emichan032

For the heck of it which can cause no harm, try a Reset - press/hold the Home key and Sleep/Wake key simultaneously until you see the white Apple logo and then release.

Phone does not ring when calling out

When I make a phone call I cannot hear phone ringing unless I put speaker on. Once person answers I can take off speaker phone and hear normally through the phone .
iPhone 4S 16 GB

I fixed it ! ..thanks to
Helpful AnswerRe: No sound on my iphone Jan 25, 2010 8:25 AM (in response to Taebak3)
In your first post you said you tried a reset, is this what you did, if not do this: Press the sleep/wake button & home button at the same time, keep pressing until you see the Apple logo, then release(ignore the slide to power off). The phone has independent volume control for each function, make sure your volume is turned up:
!http://images.apple.com/iphone/how-to/content/images/volume_p1.png! MacBook Pro

Help! Ipod does strange things when connected to a comp!

hey guys,
ok my Ipod seems to not be able to work when connected to a computer.
My Ipod mini doesnt work at all when connected to a computer. After charging my Ipod for afew hours (i've noted it hasnt hit full power yet an will be waiting now till it is fully charged again till i retry) but i connect my ipod through a usb port (tried mulitple ports) and it immediately goes from almost full battery to saying "do not disconnect" then it starts audibly beeping and the screen changes to the screen telling me there is no battery power left.
The Ipod is not even charging while connected to the computer apart from the 1st few seconds of being connected. The ipod then stays on the screen of the graphic of the empty battery with the exclamation point.
Nowhere do i see the computer or Itunes recognising the ipod being connected, i only hear the sound the computer makes wen it disconnects after the ipod crashes.
Ipod only malfunctions when attached to a computer and works normally when playing music.
thanx for any help guys
- Spruce

ok update, ive now charged the ipod (left it for approx 10 hours) with the screen showing it was charging. After the approx 10 hours it hadnt reached full. I disconnected the ipod mini and tried to listen to 1 song and it told me the battery was empty.
im now assuming the problem has only to do with just the battery.
Anyone got any ideas?

XMLStreamWriter does strange things when writing on network share

Hi,
I'm writing a file in two different formats onto a network share using CIFS. The first is a simple ASCII-TXT Format using a PrintWriter,
the second is a XML-Format using a XMLStreamWriter. Writing the XML-Format is extreamly slow compared to the ASCII-Format (only
writing over network, not localy). Since I got the same behavior writing from a Linux-System or a Windows-System to a Linux SMB-Server
or a Windows file share I used a network sniffer to take a look at the network traffic. The result was this:
A: PrintWriter.write()
    636 96.374675   192.168.0.39          192.168.0.200         SMB      NT Create AndX Request, FID: 0x2216, Path: //weser/../Test.psg
    637 96.375152   192.168.0.200         192.168.0.39          SMB      NT Create AndX Response, FID: 0x2216
    643 96.421806   192.168.0.39          192.168.0.200         SMB      Write AndX Request, FID: 0x2216, 8192 bytes at offset 0
    648 96.423008   192.168.0.200         192.168.0.39          SMB      Write AndX Response, FID: 0x2216, 8192 bytes
    650 96.491589   192.168.0.39          192.168.0.200         SMB      Write AndX Request, FID: 0x2216, 8192 bytes at offset 8192
    663 96.510346   192.168.0.39          192.168.0.200         SMB      Write AndX Request, FID: 0x2216, 8192 bytes at offset 24576B: XMLStreamWriter.write()
    761 102.802819 192.168.0.39          192.168.0.200         SMB      NT Create AndX Request, FID: 0x2217, Path: //weser/../Test.xyo
    762 102.803363 192.168.0.200         192.168.0.39          SMB      NT Create AndX Response, FID: 0x2217
    767 102.808980 192.168.0.39          192.168.0.200         SMB      Write AndX Request, FID: 0x2217, 1 byte at offset 0
    768 102.809379 192.168.0.200         192.168.0.39          SMB      Write AndX Response, FID: 0x2217, 1 byte
    769 102.809481 192.168.0.39          192.168.0.200         SMB      Write AndX Request, FID: 0x2217, 2 bytes at offset 0
    770 102.809774 192.168.0.200         192.168.0.39          SMB      Write AndX Response, FID: 0x2217, 2 bytes
    771 102.809859 192.168.0.39          192.168.0.200         SMB      Write AndX Request, FID: 0x2217, 3 bytes at offset 0
    772 102.810085 192.168.0.200         192.168.0.39          SMB      Write AndX Response, FID: 0x2217, 3 bytes
14373 105.289670 192.168.0.39          192.168.0.200         SMB      Write AndX Request, FID: 0x2217, 4096 bytes at offset 0
14376 105.290347 192.168.0.200         192.168.0.39          SMB      Write AndX Response, FID: 0x2217, 4096 bytes
14377 105.290425 192.168.0.39          192.168.0.200         SMB      Write AndX Request, FID: 0x2217, 1 byte at offset 4096
14378 105.290779 192.168.0.200         192.168.0.39          SMB      Write AndX Response, FID: 0x2217, 1 byte
14379 105.290846 192.168.0.39          192.168.0.200         SMB      Write AndX Request, FID: 0x2217, 2 bytes at offset 4096
14380 105.291071 192.168.0.200         192.168.0.39          SMB      Write AndX Response, FID: 0x2217, 2 bytes
14381 105.291148 192.168.0.39          192.168.0.200         SMB      Write AndX Request, FID: 0x2217, 3 bytes at offset 4096
14382 105.291446 192.168.0.200         192.168.0.39          SMB      Write AndX Response, FID: 0x2217, 3 bytesWhich means that using the XMLStreamWriter the first byte is send 4096 times, the second byte is send 4095 times ... till the next
block starts at the next offset. My question is why and what to do about it ...
Yours,
Andreas

Yup, that was the problem. Sometimes it can be so easy ...
Thanks for the quick answer.
Yours,
Andreas

BB Curve 9300 doing random things, won't let me type my unlock password, send/receive texts or phone calls

I have had my BB Curve 9300 for 1 day, today it appears to be doing random things, when I try to type my unlock password it is putting random characters in. Its also sending random text messages out and I am unable to answer any calls? Any ideas? Thanks

Sounds like this could be a software issue. Have you upgrade any of the software or changes any settings or put a different OS on the phone?
If Not
I would suggest taking it back to where you bought it and have them issue it as an OBF (Out of Box Failure). Afew BBS have this problem and usually they come with a 7 days warranty in case of a manufacturing fault. Should that be the case I would recommend that you take your 9300 back and demand for either a replacement of for them to fix it for you free of charge.
But should you have changed something or added new software then the fault lays on you and you're responsible for the fixing of the BB.

Why does my touch do completely random things when im not even touching it?

I just got a new 2nd gen 16gb ipod touch that is really bugging me. It doesn't respond to what i tell it to do and does random things when im not even using it. Like if i set it down on my desk and just look at it without touching it, it might randomly go to the stock page, or go to contacts and start typing in gibberish, or go to settings, etc. It just does things and only sometimes responds to my touch...do i have a defective touch??

Telekenesis?
Seriously, though, with spurious input like this and incorrect input when you do touch the screen, it sounds as if the screen may have a problem. I presume you have no protective covering on the screen?
It sounds as if the input may actually be delayed for far longer than it should. Is there any recent app install that may affect this? Have you tried the obvious restart, reset processes? If so, and this is still incorrect, off to the shop with it.

5800xm doing annoying things when calling...

Similar Messages

Maybe you are looking for