5800XM - hard reset after upgrade ?

hi all ! I just want to ask. my friends told me to hard reset my Tube and re-formated my memory card after I upgrade the firmware. is it true ? they said its a must (lot of explanation why, can't write it all). but i don't had trouble without hard reset my phone. I've had my Tube upgraded to FW21 from FW20. Anyone ?

Your friend is over-reacting a bit.
Basically, some people might have to do a hard reset if they have problems after the update, but most people probably won't have problems.
I covered this in a 5800 firmware tutorial I did for AAS, I hope it's okay to link to it:
http://www.allaboutsymbian.com/features/item/How_to_update_the_firmware_on_the_Nokia_5800_XpressMusi...
Basically:
1.If the OTA firmware update works without a hitch, you don't need to do anything
2. If there's a problem after the update, try a settings reset using the code*#7780# and then lock code (which is 12345 by default)
3. If there's still a problem, try a firmware update through the PC application (ie wipe the phone).
4. If there's STILL a problem, contact Nokia's support services (go to nokia.com/support and select your country or region)

Similar Messages

Do really need to soft/hard reset after updating f...

hello..
i just wanna know do we really need to soft/hard reset our phone after updating firmware??
btw im using nokia 5800XM..im updating my firmware from V50 to V51
tq..
Buy Original..See Original..
Solved!
Go to Solution.

In my experience I've found that when I don't do the reset before and after I invariably have problems. For example when I updated my N97 to the v22 firmware the auto-rotate function stopped working properly.
I actually also remove all apps and format the mass storage prior to the firmware update which ends up taking a ridiculously long time with the reloading of my media and maps but I now realize that I'll end up having to do it anyway so I might as well do it properly the first time.
It could just be the N97 as it's such a hunk of junk but I think it's more likely that it's an issue with the update process in S^1.
Nokia N97 (RM-507) v 22
iPhone 4 (Coming Soon) - Lemon N97 - SE - Nokia 8210 - Nokia 7710 - Nokia 5100

Ipad Air auto resets after upgrade to iOS 8

After upgrade to iOS 8, my iPad air usually auto resets while i am using Chrome. A little blue screen on the top of the screen after the iPad shuts down and it return to lock screen.

After upgrade to iOS 8, my iPad air usually auto resets while i am using Chrome. A little blue screen on the top of the screen after the iPad shuts down and it return to lock screen.

IPod cycles hard reset after Texas Hold'em install

I'll send the message to Apple and call as well tomorrow, but thought I would throw this out there to see if anyone has advice - and also as a cautionary note.
I downloaded Texas Hold'em tonight to install onto my 5G Video iPod. I'm running iTunes 7.0.1 (7) and have the latest updater installed.
After playing the game for about ten minutes, my iPod froze. Not such a big deal, I thought. I performed a hard reset and figured it would take care of itself.
Unfortunately, my iPod now cycles through hard resets on its own every 5 seconds or so. The Apple logo appears on the screen, the hard drive spins up, then the iPod immediately shuts down again and restarts, ad infinitum.
I'll reformat it using iTunes, but you can see the problem here - that requires getting the iPod to successfully restart itself. I went through the iPod diagnostics and everything seems to check out okay. I put it in hard disk mode (something I've never done with this particular iPod). I get a black and white graphic of the lightning bolt (don't know if that's normal or not) but the computer will not find the drive when connected.
Wondering if anyone knows of any third party software that might be able to help get the iPod to mount in external HD mode. I just need to get it mounted somehow so that I can reformat it.
Thoughts?

Wondering if anyone knows of any third party software that might be able to help get the iPod to mount in external HD mode. I just need to get it mounted somehow so that I can reformat it.
Yes there is a software called yamipod, you can download it at www.yamipod.com
kEat0n

E7 Hard reset after effects

Hi,
I installed Anti Virus software "NetQin" and after installation I restart my mobile phone but it could not restart and displayed a message "Cannot restart, contact retailer". After many tries when I failed to restart my phone (E7 : OS-Belle), I did hard reset. After hard reset I lost Photo and Video editors, ovi store client etc. I reinstalled the softrware 3-4 times but these apps are still missing. Can some one give correct way to solve this issue?
Solved!
Go to Solution.

Even the Maps functioning might have been affected .. The ONLY solution is to get the Firmware flashed at Nokia Care

N85 will not hard reset after V30 firmware update.

I just got my new Black N85, this is my second one I also have a copper one but it is only at version 20 firmware and when I did a update to version 30 firmware, I could not do a hard reset doing the *#7370# or the three finger reset, all it did after I put in security code is reboot and go back to the home screen, no reset at all. Here we go again with Nokia and their messing with the people that make them the million's that they have. I am getting so SICK of Nokia and their Garbage!!!!

i think you are genuinely confused as to what a hard reset is, Grschinon is indeed correct. i am sure that you can perform this on your phone so try this:
with the phone turned off, press and hold the green call key, * key and the 3 key all at the same time. while holding all of these down, press and hold the power button down until the Nokia hands logo is displayed on the phone. there should now be the country selection/date and time selection screen displayed. if that does not work, then instead of pressing the 3 key, substitute this for the multimedia key (small silver key). if those still do not work, then your best bet is to take your phone to your local Nokia Care Centre for them to take a look at.
please throw some kudos our way, it would mean a lot to us
If you found this or someone's comments helpful or like what that person has to say, please give some Kudos to their post!

IPod requires hard reset after playing podcast with chapters

I've noticed that I need to do a hard reset (hold down menu and select buttons for a few seconds) after my iPod goes idle after playing a podcast with chapters (the Ricky Gervais show).
Anyone else have this problem?

Can reproduce the problem on a 20GB 4G and 6GB mini
with another podcast series with chapters
(fortunately not many I listen to have caught up with
chaptering).
The odd behaviour I've noticed is that the Ricky
Gervais podcast, for example, only has to be present
on the iPod and never listened to for the iPod/s to
lock up when they go to sleep. A hard reset then
required to bring them back to life until the podcast
has been listened to and the iPod/s then resync'ed
with the mothership to then remove it (and restore
some sanity until the next one).
I did conduct a hard restart of my 10GB iPod with no success. The only workaround solution I've discovered is to use the "Convert Selection to AAC" under the Advance menu in iTunes while selecting the podcast. It converts the podcast to a new AAC file without chapters, and it plays fine on my second gen iPod. But now my library has 2 copies of each podcast, one for iTunes, one for iPod. Anyone else have any luck with the 10GB iPod? I guess it doesn't like the new podcasts with chapters.

Why does airport extreme need hard reset after power outage

Airport extreme is unresponsive after interruptions in power and requires a hard reset to get working again. It will also freeze during heavy usage from multiple computers and then a hard reset is necessary to get it working again. It is becoming a chore.

The obvious answer is that if you are using firmware 7.5.2, downgrade to 7.4.2.
Otherwise if you can simulate a power fail by pulling the plug and still have the problem then
If you are still under warranty, take it back...
Jerry

Can't open external hard drive after upgrading to photos 9.6

I know there have been other variations to this question but mine's a bit different and I didn't find a conversation about this yet:
I've always backed up all my pictures on an external hard drive (Seagate, standard, works with all computers). After I upgraded to Yosemite 10.10.1 and therefore iPhotos 9.6, I haven't been able to access them at all. I'm trying not to panic and am wondering what I can do. There's no way that the upgrade DELETED everything on my hard drive, right?!? Checking the back-up (i.e., Time Machine) on my laptop doesn't help in this case because none of the photos were there in the first place. Please help!
MacBook (13-inch, Late 2009)
Processor 2.26 GHz Intel Core 2 Duo
Memory 4 GB 1067 MHz DDR3

It is powered (the light is on). I was uploading photos from the drive yesterday, so it worked perfectly fine before the upgrade to 10.6.8 (which I did during the night). Is there anything else to try before I move it to another computer to see if it works? Again, thanks.

Can't mount WD external hard drive after upgrade to Mountain Lion

I have two external hard drives on my iMac. One for Time Machine and Aperture Library Files (My Book Essentials formatted Mac OS Extended Journaled) - this works fine.
The other is an older WD 500Gb drive which is partitioned Windows_Fat_32. (Keep in mind, I'm not even sure what this means exactly). It contained my iTunes library and a lot of photo backups. It worked fine on my iMac with Snow Leopard, but since upgrading to Mountain Lion, it won't mount. I get an error that says "this drive is not readable by this computer" and I get options to "intialize", "ignore", or "eject". Disk Utility sees the drive but won't let me do anything with it. Is there a way to salvage this data? I don't mind reformatting after I move the data or getting a new drive, but I don't want to lose the data. My iTunes music files are extensive and they are on the good external drive, but the "library" is on the bad one...
Sorry if I haven't explained well..

hi,
it is kind of late, but I wonder, did you manage to solve the issue?
I have lacie drives, and the firmware upgrade is apparently required, but I cannot find the appropriate one at lacie's website... the ones i tried do not recognize my drive...
my lacie quadra d2 250 GB (USB, FW 400, 800) goes to sleep, and does not wake up....
I'm still searching for help...
ps: lacie's support page is quite hard to pierce, they require one to sign up, but no support for latinaamerican countries... so I could not sign up, therefore could not reach their support

Open GL now causing HARD CRASHES after upgrade to 10.5.7

I have a 2.5 year old mac pro intel mac quad core. My graphics card is NVIDIA GeForce 7300 GT. After the last update, I get hard crashes when I used OpenGL intensive programs such as Photoshop and Electric Image Animator. Electric Image is a 3d program that uses Open GL intensely. When I move a light around it will cause my machine to lock up. Another person who uses Electric image and has the same graphics card is having the same issue.
http://www.eitechnologygroup.com/forums/viewthread/1086/
I made sure I have the latest firmware upgrades for the card. I Need a Fix.

Try the ATI Radeon 4870, even though it isn't endorsed for use in your 1st gen Mac Pro.

Can't print or save PDF files to hard drive after upgrading to Adobe Reader 10.1.3

I upgraded to Adobe Reader 10.1.3 on my Mac with OS X 10.7.3. I can open PDF files on Internet, but can neither print them nor save them to my hard drive.

I had the same problem and stumbled by accident on an odd way how to save the PDF file.
After the PDF file is visible, press the key escape “esc”. A new toolbar above the PDF file will appear. Press the “disc” icon next to the “printer” icon. A window drops down, and now you can save the PDF file in your download folder.

Why does my iPhone need every time to be hard-reset after charging?

Every time I fully charge my iPhone 6 Plus it turns off and doesn't want to turn on normally: I have to reset it every time by pressing the Home button and the Sleep/Wake button for a couple of seconds.
Also, sometimes after leaving it in sleep mode, when I wake the iPhone I find it having restarted alone without me doing anything: it asks me to type again the PIN number of my SIM card, as if it had just been turned on.
What can I do?
is it a battery or a iOs issue?

I think you need to talk to App tech. If you were sent a forced upgrade, it forces the phone to reboot when it hits 100% charge. Problem is after update and/or restore, it continues to do the reboot after you hit 100% battery capacity.
I have 6 phones that do the same. The tech guys don't believe me or they do not want to admit they have a problem with the forced update.
It left me stranded without my phone and the data in it while I was away. Bought a android phone for a back-up but may keep it as a main.
It seems if you want to carry your phone now-a-days, you better carry a laptop with iTunes in case there is a issue.
This whole thing is getting out-of-control as I spend more time servicing my phone than it spends servicing me. Which was the reason for not connecting to iTunes and updating it and then my phone every other month. So what do I get, forced update and inoperable phones.
If you can get it connected and set again, don't let it charge to 100% again and it will be fine. Otherwise see apple.
Who owns these phones anyway? It certainly is not me.

WRT55AG-v2 constantly resetting after upgrading to 1.79 firmware

Hello,
I recently upgraded the firmware on my WRT55AG (v2) router to version 1.79 and now I have a problem with the router constantly rebooting itself! I have had the router for over a year and never had any problems until upgrading the firmware.
Occasionally things will work fine for a half hour or so, but usually it doesn't go more than 10 minutes or so without resetting itself. When it reboots, all the lights on the router go out (except the power light) and then slowly boot back up. As it does this XP will display the message "A network cable is unplugged". After about 30 seconds it will start working again.
Any ideas? I tried re-flashing it with v1.79 again but that didn't help. I have also unplugged the router countless times to "cold boot" it but that hasn't helped.
Thanks,
Jay

Press the reset button at the back of the router for 30 secs. You can do a restore but I wouldn't if I were you. I'd recommend reconfiguring the settings.
The box said windows xp or better... So I installed Linux!

Not recognizing external hard drive after upgrading to mountain lion

I recently upgraded to mountain lion. While my external hard drive originally showed on the desktop it does not anymore, The hard drive is partitioned between my wife (laptop) and my desktop. My wife's part does show on the desktop but mine does not. From reading some of the issues on the Support Community I did a disk repair as it does show up under disk utility. Although the disk repair was performed successfully, it still does not appear. I read some other comments about Fuse but I don't understand what this is about. Any suggestions to get my external hard drive back so I can keep my computer backed up. Thanks.

It is powered (the light is on). I was uploading photos from the drive yesterday, so it worked perfectly fine before the upgrade to 10.6.8 (which I did during the night). Is there anything else to try before I move it to another computer to see if it works? Again, thanks.

5800XM - hard reset after upgrade ?

Similar Messages

Maybe you are looking for