[5800xm] Problem with rSAP usage in Skoda nav-syst...

Hello,
like in the topic: I have a problem with rSAP usage in Skoda nav-system Columbus: it stays ON searching for the car nav-system & eats battery level (just being standby): within 24 hrs completely empty. With bluetooth turned on, without previously connecting to my Skoda nav-system, the phone can run for about 10 days standby.
I tried every setting without improvement, I run the latest firmware/software on my 5800 XM.
Only if I turn off manually the bluetooth subsystem (not just the nav-system connection, but completely turn off bluetooth), then the phone doesn't eat through my battery-level. I dont want that, because it's not neccessary (I have to turn it back on again later & forget to do that), sometimes I forget and find out people can't reach me coz my phone is battery-empty.
Anyways, this situation is already since the beginning when I bought the phone from Nokia store. No improvement since.
Please can anybody help out?
Thnx
Solved!
Go to Solution.

Well, since a few days we're testing the default setting from aspergerguy and now it seems the battery problem doesn't occur no more. Amazing how such a small change of unexpected / undocumented setting can give a device real purpose instead of almost uselessness.
For clarity, again the problem: I am able to use the phone with the carkit-nav system, but after using (ergo: getting out of the car, into our home), the phone eats through the battery within 24hrs.
This now no longer happens with Wireless car kit set as default.
Thanks aspergerguy for your help!
Less thanks Nokia for creating this problem in the first place.
Regards,
Quan

Similar Messages

Does anyone have problems with data usage with att and Iphone5?

Hello, Does anyone have problems with data usage or non usage I should say with Iphone 5 and AT&T?

After 4+ months of dealing with this data usage and battery drain problem that included 3 data captures of my wife's iMac, the trigger for us regarding the problems syncing with iCloud, and 5 hours of logs off my iPhone 6 to be analyzed by Apple engineers that included times my wife's computer was both on and off to demonstrate the difference in data usage and battery drain under those conditions, I can say with very reasonable certainty that the iOS 8.3 and corresponding Mac OS 10.10.3 update has solved the problem.
We have now been running for about 2 weeks and data usage with the iCloud Servers attempting to sync has dropped from a rate of 31 GBs to under 15 MBs per month. Yes, you read it right. We were burning 2000 times as much data doing absolutely nothing important on both of our phones, a 5s and a 6. Just imagine what that does to battery life! The 5s would last about 5 hours and the 6 was dead in less than 14.
The distasteful aspect of this process was how the engineers were quietly fixing the problem at the same time sending messages to my contact person within Apple that were dismissive in nature in the face of indisputable unreasonable results. I must say, this experience with the multiple times the engineers' responses were inappropriate put a little tarnish on the old Apple shine of the ‘It just works’ mantra. This was my first experience in 34 years that caused me to stop recommending Apple products without reservations and with a disclaimer.
Since the update solved the problem, then I can only conclude that there was a logic bug regarding the reaction within the process to the incoming data that was corrected. There was noting short of logging out of iCloud that circumvented the problem for us, Gator5000e and probably many others noted on other threads. I am not trying to imply that this is the cause of everyones battery use problem, but it is reasonable that it was a cause for many.

Problem with memory usage and CPU usage

Hello,
i have a problem with the memory usage and cpu usage in my project!
My application must run for more than 24 hrs. The problem is that the longer it runs the bigger is the memory and cpu usage!
It starts with ~15% CPU usage and ~70 MBytes memory usage. After ~ 24hrs the CPU usage is ~60% and the memory usage is ~170 MBytes!
After 3 days the CPU usage is almost about 70% and the memory usage is about 360 MBytes!
What can I do to reduce this huge recource usage?
Thank you!

Hi Pahe,
   I think the issue is memory usage, since CPU usage can increase due to greater memory requirements.
   Anyway, it's difficult to debug without seeing your code, can you post it (possibly for LV 7.1 compatibility)? Or just post a JPEG of the piece of code that can give problems...
   I guess you're appending data to an array instead of replace data elements, but I can't be sure...
   Have a nice day!
graziano

Problem with Clip Usage and merged clips in CS6

The 'Clip Usage' drop-down menus don't seem to work in Premiere CS6 for merged clips. The info bar at the top of the project window correctly lists the number of times the viedo and audio from the clip has been used, and the downward-pointing arrow appears, but when you click on it... nothing happens. Same's true of the 'Video Usage' column in the main body of the project window. Non-merged clips work just fine.
Anyone know if this is just a problem with my project, or if it's a bug in Premiere? Had a lot of trouble with merged clips in CS5.5, and was hoping they'd be solved by CS6 - I've been using Creative Suite for a long time, and the lack of good merged clips support was always one of the challenges in persuading other indie editors to switch over from FCP...
Thanks!

...and the lack of good merged clips support was always one of the challenges in persuading other indie editors to switch over from FCP...
I guess they just have to weigh that up against the lack of support they got from Apple for FCP in its entirety.

I have a huge problem with memory usage.

I am having two very huge problems with the amount of memory the game I'm working on is using. The first is that the background image for a part of my game takes up ~45mb of memory, but believe it or not, that's not my worst problem. i'm not worried about that right now.
The really, really big problem does involve that image, though.
Whn I'm done using the image, I can't get the resources it uses to be freed. As a result, the program uses more and more memory every time you go into that area of the game, because the memory used by tha area is just sitting there.
I used Jprofiler to figure out exactly what wasn't getting released, because I do everything I know how to make everything be garbage collected, including setting all the references to the image to null after you leave that area of the game, but nothing worked.
After I leave the area with the huge memory leak and give everything time to garbage collect, the main screen for memory usage shows about 45mb of memory used by 20 or so instances of int[], which is obviously the image.
However, this obscenely huge int array doesn't show up in the heap snapshot, which according to them means there's no reference to it or the image anywhere in the program.
Here's my question: If there's no reference anywhere to this int array, then why isn't it being garbage collected?

Maybe you haven't actually released all references to that data.
Or if you have one 45mb image, maybe you have a bunch of other huge ones and you're just seeing those.
Why do you have a 45mb background image, though? Can't you use a standard technique like tiling it?

Photoshop Premiere 9 vs 13? Are there any problems with CPU usage and crashing?

I stopped using Premiere, because they the computer would freeze and/or the program. I was curious if there was any issue with people currently using Version 13? I think I loaded it on this computer along with Photoshop Elements 9. After a while I just kept Photoshop Elements.
System Specs:
Windows 7 premium home edition
Processor Intel R Core TM i5-2410M CPU @ 2.30 GHz 2.30 GHz
Installed Memory 6.00GB 826 GB free
64 Bit Operating system

stephanies
If 64 bit, while 9 will be a 32 bit application with the limitations of a 32 bit application on 64 bit system, 13 will be a 64 bit application which translates into more computer resources available to 13.
Elements Organizer 9 will not integrate with Elements Organizer 13 although you can convert the 9 catalog in Elements Organizer 13. And there is a marked difference in the workspace between the two versions. Principles tend to stay the same, but features can be moved, changed, or discontinued.
I would have expected Premiere Elements 9/9.0.1 to have worked in your computer environment. Since it did not, I would strongly suggest that you look at the free 30 days tryout of Premiere Elements 13/13.1 in your computer environment to assure the compatibility of it with your computer environment and project goals.
Lots of causes for program crashes (any version).
a. Conflicts with antivirus program.
b. Problem with video card graphics card
c. Use of a pen and table device instead of mouse
d. Problematic source media and format conflicts
e. Not running program as Administrator
f. Poor installation
g. Failure to install QuickTime along with Premiere Elements on the computer
h. Not meeting System Requirements in some way.
i. Other
https://helpx.adobe.com/premiere-elements/kb/system-requirements-premiere-elements.html
Please review and consider. Any questions or need clarification, please do not hesitate to ask.
Thank you.
ATR

Massive problem with memory usage

Hello ladies and gents!
Just before Christmas I bought my first MacbookPro 13" mid-2012 which is 2.5Ghz and 16gb RAM. Firstly it was just a toy since I've been using Windows for ages because of my work. After a while I've tried to make one or two projects on my mac and noticed it handles them quite nicely. I decided to move my entire workflow to mac and was more than happy with the results. Until last month.
I have no friggin' idea why but my macbook started to work terribly slowly. Nothing unextraordinary happened, there were no new apps or nothing like this. I've tried to manage the kernel_task problem but it helped only for a few days. Even if I kill the photoshop and illustrator processes, mac still uses more than 9GBs of RAM which drives me crazy. My Windows machine is only 12GB of RAM and same specs as my mac and it KICKS OFF it's butt!
What should I do? I love the OS X workflow but my clients won't accept delays any more!
EtreCheck version: 1.9.12 (48)
Report generated August 8, 2014 at 2:42:06 PM GMT+2
Hardware Information:
MacBook Pro (13-inch, Mid 2012) (Verified)
MacBook Pro - model: MacBookPro9,2
1 2.5 GHz Intel Core i5 CPU: 2 cores
16 GB RAM
Video Information:
Intel HD Graphics 4000 - VRAM: (null)
Color LCD 1280 x 800
DELL U2412M 1920 x 1200
System Software:
OS X 10.9.4 (13E28) - Uptime: 3 days 21:12:9
Disk Information:
HITACHI HTS725050A7E630 disk0 : (500.11 GB)
EFI (disk0s1) <not mounted>: 209.7 MB
Macintosh HD (disk0s2) / [Startup]: 499.25 GB (95.28 GB free)
Recovery HD (disk0s3) <not mounted>: 650 MB
MATSHITADVD-R   UJ-8A8 disk1 : (846.4 MB)
[email protected] (disk1s0) /Volumes/[email protected]: 571.6 MB (Zero KB free)
USB Information:
Wacom Co.,Ltd. CTH-460
NOVATEK USB Keyboard
Apple Inc. FaceTime HD Camera (Built-in)
Apple Computer, Inc. IR Receiver
Apple Inc. BRCM20702 Hub
Apple Inc. Bluetooth USB Host Controller
Apple Inc. Apple Internal Keyboard / Trackpad
Thunderbolt Information:
Apple Inc. thunderbolt_bus
Gatekeeper:
Mac App Store and identified developers
Kernel Extensions:
[not loaded] com.wacom.kext.pentablet (5.3.3 - SDK 10.8) Support
Launch Daemons:
[loaded] com.adobe.fpsaud.plist Support
[running] com.tvmobili.tvmobilisvcd.plist Support
Launch Agents:
[not loaded] com.adobe.AAM.Updater-1.0.plist Support
[loaded] com.adobe.AdobeCreativeCloud.plist Support
[running] com.tvmobili.artwork.plist Support
[running] com.wacom.pentablet.plist Support
User Launch Agents:
[loaded] com.adobe.AAM.Updater-1.0.plist Support
[loaded] com.adobe.ARM.[...].plist Support
[running] com.spotify.webhelper.plist Support
User Login Items:
iTunesHelper
Alfred 2
Internet Plug-ins:
WacomNetscape: Version: 2.1.0-1 - SDK 10.8 Support
Default Browser: Version: 537 - SDK 10.9
Flip4Mac WMV Plugin: Version: 3.2.0.16   - SDK 10.8 Support
WacomTabletPlugin: Version: WacomTabletPlugin 2.1.0.2 Support
AdobeAAMDetect: Version: AdobeAAMDetect 2.0.0.0 - SDK 10.7 Support
FlashPlayer-10.6: Version: 14.0.0.145 - SDK 10.6 Support
AdobePDFViewerNPAPI: Version: 11.0.07 - SDK 10.6 Support
Silverlight: Version: 5.1.30214.0 - SDK 10.6 Support
Flash Player: Version: 14.0.0.145 - SDK 10.6 Support
QuickTime Plugin: Version: 7.7.3
AdobePDFViewer: Version: 11.0.07 - SDK 10.6 Support
JavaAppletPlugin: Version: 14.9.0 - SDK 10.7 Check version
Audio Plug-ins:
BluetoothAudioPlugIn: Version: 1.0 - SDK 10.9
AirPlay: Version: 2.0 - SDK 10.9
AppleAVBAudio: Version: 203.2 - SDK 10.9
iSightAudio: Version: 7.7.3 - SDK 10.9
iTunes Plug-ins:
Quartz Composer Visualizer: Version: 1.4 - SDK 10.9
3rd Party Preference Panes:
Flash Player Support
Flip4Mac WMV Support
MagicPrefs Support
PenTablet Support
Time Machine:
Time Machine not configured!
Top Processes by CPU:
      9% Spotify Helper EH
      4% WindowServer
      3% Spotify
      1% coreaudiod
      1% mds_stores
Top Processes by Memory:
2.61 GB Adobe Photoshop CC 2014
2.34 GB Adobe Illustrator
1.07 GB firefox
279 MB PluginProcess
229 MB WindowServer
Virtual Memory Information:
258 MB Free RAM
6.82 GB Active RAM
6.96 GB Inactive RAM
1.40 GB Wired RAM
19.76 GB Page-ins
70 MB Page-outs

Formatted disk. Fresh OS X. The only apps running are Safari (with two tabs opened) and Spotify. Result:
EtreCheck version: 2.0.6 (91)
Report generated 19 Oct 2014 21:36:09 GMT+2
Hardware Information: ℹ️
MacBook Pro (13-inch, Mid 2012) (Verified)
MacBook Pro - model: MacBookPro9,2
1 2.5 GHz Intel Core i5 CPU: 2-core
16 GB RAM Upgradeable
BANK 0/DIMM0
8 GB DDR3 1600 MHz ok
BANK 1/DIMM0
8 GB DDR3 1600 MHz ok
Bluetooth: Good - Handoff/Airdrop2 supported
Wireless: en1: 802.11 a/b/g/n
Video Information: ℹ️
Intel HD Graphics 4000 -
Color LCD 1280 x 800
DELL U2412M 1920 x 1200
System Software: ℹ️
OS X 10.9.5 (13F34) - Uptime: 2:41:15
Disk Information: ℹ️
HITACHI HTS725050A7E630 disk0 : (500,11 GB)
S.M.A.R.T. Status: Verified
EFI (disk0s1) <not mounted> : 210 MB
eighty9 (disk0s2) / [Startup]: 499.25 GB (353.55 GB free)
Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
MATSHITADVD-R UJ-8A8
USB Information: ℹ️
NOVATEK USB Keyboard
Apple Inc. BRCM20702 Hub
Apple Inc. Bluetooth USB Host Controller
Apple Computer, Inc. IR Receiver
Apple Inc. Apple Internal Keyboard / Trackpad
Apple Inc. FaceTime HD Camera (Built-in)
Thunderbolt Information: ℹ️
Apple Inc. thunderbolt_bus
Gatekeeper: ℹ️
Mac App Store and identified developers
Launch Agents: ℹ️
[not loaded] com.adobe.AAM.Updater-1.0.plist Support
[failed] com.adobe.AdobeCreativeCloud.plist Support
User Launch Agents: ℹ️
[loaded] com.adobe.ARM.[...].plist Support
[not loaded] com.spotify.webhelper.plist Support
User Login Items: ℹ️
Spotify Application (/Applications/Spotify.app)
Internet Plug-ins: ℹ️
AdobePDFViewerNPAPI: Version: 11.0.09 - SDK 10.6 Support
AdobePDFViewer: Version: 11.0.09 - SDK 10.6 Support
QuickTime Plugin: Version: 7.7.3
AdobeAAMDetect: Version: AdobeAAMDetect 2.0.0.0 - SDK 10.7 Support
Default Browser: Version: 537 - SDK 10.9
3rd Party Preference Panes: ℹ️
None
Time Machine: ℹ️
Time Machine not configured!
Top Processes by CPU: ℹ️
      8% WindowServer
      3% PluginProcess
      2% Spotify
      2% Calculator
      1% hidd
Top Processes by Memory: ℹ️
189 MB com.apple.IconServicesAgent
172 MB ocspd
155 MB softwareupdated
137 MB Spotify
137 MB mds_stores
Virtual Memory Information: ℹ️
3.15 GB Free RAM
3.97 GB Active RAM
8.48 GB Inactive RAM
1.58 GB Wired RAM
6.65 GB Page-ins
0 B Page-outs
I'm opening photoshop and my file. My first action is grabbing and moving picture which results in crashing photoshop. I'm speechless....................................

Problem with enabling usage rights for Adobe Reader

Hi All,
I have designed a form using Live cycle. From Live cycle I export it as PDF. As a final step, I open the PDF by using acrobat professional to enable usage rights for Adobe Reader. As soon as I enble the rights it saves the document with a different name, which is fine. However; at the same time it also runs the postsave events from the form and removes a couple of objects. How do I avoid this? My form has very little code:
There is a drop down field called 'LearningSolutionsAdvisor' which has the following code on PostSave event:
NewHorizons.Page1.LearningSolutionsAdvisor::postSave - (FormCalc, client)
LearningSolutionsAdvisor.access ="readOnly"
There is 'Save' button which has the following code:
NewHorizons.Page1.Save::click - (JavaScript, client)
app.execMenuItem("SaveAs");
NewHorizons.Page1.Save::postSave - (FormCalc, client)
Save.presence = "invisible"
I thank you for your help in advance.
Regards,
Girish

This video is very helpful as it explains exactly what I want to do: Extend Features in Adobe Reader, to allow my readers to save their changes. However, I do not have that option in my version of Adobe X Pro 10.1.4. Can anyone explain to me why I don't have that option, and what an alternative would be?

Problem with SAVE_TEXT Usage

Hi,
I'm starting a new thread because this is a different issue than my original problem.
I am using our BW system to save texts. Calls to the function return with sy-subrc=0. However, no data is added to STXH and STXL.
We have never before saved texts to the TDOBJECT that I'm trying to save to now.
I have used txn SM75 to create the TDOBJECT and IDs.
Is there something that I need to set up before I can use the object and texts?
Thank you.

Fong,
I am not sure if the transaction SM75 is the right one, I could not find that in my system. Usually you create texts using SO10 transaction.After using SAVE_TEXT if you commit the same, usually the text is saved.
While retrieving using READ_TEXT you will have to pass the same objects used while saving.
Regards,
Ravi

Problem with IE reading my Spry nav-bar (cs3)

Any ideas on what would cause this and how to fix it are very
much appreciated! I used Dreamweaver CS3's Spry functionality in
order to make the dropdown menu, only I used rollover images
instead of plain text. Is there a way to make IE like this bit of
code, like Firefox and Safari seem to?
The code, in IE makes the menu 'dropdown' to the side as if
they were all in line. You can see a preview of the problem, here.
Site-in-development

Have a look in main.css
nav ul a, nav ul a:visited { /* grouping these selectors makes sure that your links retain their button look even after being visited */
padding: 5px 5px 5px 15px;
display: block; /* this gives the link block properties causing it to fill the whole LI containing it. This causes the entire area to react to a mouse click. */
width: 160px; /*this width makes the entire button clickable for IE6. If you don't need to support IE6, it can be removed. Calculate the proper width by subtracting the padding on this link from the width of your sidebar container. */
text-decoration: none;
background: #C6D580;
Gramps

Problem with BOM usage

Hi,
Due to client requirements, i have created a new BOM usage type "X".
At OS21, i have set the default as "relevant to production".
Defined order of priority in OS31, and assigned to plant parameters through OPPQ.
In OS30, created new application & assigned to production order types.
The Problem is iam able to make use of this BOM in a production order, and iam not able to explode it through transaction CS12.
When i explode it through CS12, the message i got is mentioned below.
E: to XCPPEDLJ31-DEMO4/IN10/ZP01 no BOM is available
Message no. 29514
Regards,
K.Kumar.

In OS31
Are you maintained the selid, selpr, BOM usage(newly created)?
while creating a BOM application are you maintained the same selid (selection ID) ?
and also check your BOm application have any indicator relevant to explosion of MRP, rel Costing, rel for work scheduling,pland order, Rel order, collwith, sale order,

Regarding problem with updating usage decision in QA11

Hi Experts,
I am trying to use the Bapi "BAPI_INSPLOT_SETUSAGEDECISION" to update the usage decision in QA11 in a proxy. I am not being able to understand what parameters to be used and how.
CALL FUNCTION 'BAPI_INSPLOT_SETUSAGEDECISION'
EXPORTING
    NUMBER               = INPUT-SAP_USAGEDECISION-DETAILS-UD_INSPLOT "inspection lot no from the proxy structure.
    UD_DATA              = lw_data
LANGUAGE             =
IMPORTING
UD_RETURN_DATA       =
STOCK_DATA           =
   RETURN               = li_return
TABLES
SYSTEM_STATUS        =
USER_STATUS          =
Please help.

Hi,
Just pass the inspection lot number to the field NUMBER and try, because there are no standard programs in which this FM is called apart from a Business Object BUS2045, it is called in the method InspectionLot.StatInterface.
You can check that for any clarification, but it is not clear there as well.
Thanks,
Mahesh.

Problem with iPhone usage stats

My usage and standby times read the same. Whenever I use the phone for let's say 10 minutes the standby will go up by 10 minutes but its not the case the other way around so like usage doesn't go up when phone is I'm standby. Is this serious and is there a fix

Jay Davies - I am also running an iphone unlocked on vodafone but in Ireland. I have tried rebooting after doing the steps above and it keeps my usage stats intact now. Before it wiped out the stats if I rebooted - even if I hadn't installed anything. It also wiped out the stats if I didn't reboot at all between charges.
Those steps above fixed my phone for battery charge life and the usage stats so hope it might for other iphones also.

Problem with uiimagepickercontroller usage

hi everybody,
i am new to iphone programming i am using a scrollview to open multiple view on that views i had an picture display on which i am implementing uiimagepickercontroller to get the image from the gallery now i am unable to use this uiimagepickercontroller it is throwing exception please guide me any suggestions will be appreciated.
thanks in advance.

Apple just released iOS 6.1.2. Try updating to it and see if that fixes anything, there was a cellular usage fix in the update notes.

Problem with power usage w/maintain lion

i had good battery life (6-7 hrs.) under lion and snow leopard, then i upgraded to mountain lion, now my battery life is 1h 15 min. I am now forced to switch back. BOO! I like the fixes to other thing but this stinks and is unbearable. back to lion 10.7.4 quick for me. ml 10.8.1 is more stable, but seem to use electricity like a mac pro.

Hi there:
Well my first and really only guess is that your refurbed power adapter is at fault here. If your old one wasn't doing this then I would say the battery is not at fault here. Maybe try calling Apple. Sounds pretty frustrating. Hope it ends up well.

[5800xm] Problem with rSAP usage in Skoda nav-syst...

Similar Messages

Maybe you are looking for