59000XT 128-VTD TV-Out problem with video.

I have the MSI GeForce 5900XT-VTD128. I´m using the TV-Out funktion and I clone my primary desktop. It all works fine to show the desktop on my TV. But when I try to play a Quicktime Movie in Quicktime it dosen´t work. It is the same problem with Windows media player.
I get a good picture on my primary screen but I get a "black" picture on my TV.
Ex. if I run windows Media player and starts an MPEG and I run Windows media player not maximized. On my primary screen I can se the Video beeing playd. But on my TV I only see Windows media player but I don´t see the move bieng played. It is just black. The same thing hapens in Quicktime. I Can't see video on my TV.
what could be my problem?
I´m using the latest drivers, (Have tested with Nvidias latest to but i´m now back to MSI 61.77)

Thanx.
That worket for me!
/Best regards
Sven Hagström

Similar Messages

Problem with video capture device, with a virtual camera

I try to use Adobe Flash Media Live Encoder 3 with a virtual camera(DirectShow Filter) but met such a problem:
"Error connecting input preview RGB filter."
"Failed with error 80004005:SetupInputVideoPreview(pFilter, pguidCategory)"
"Failed with error ffffff97:SetupVideoPreview(pFilterSource)"
"Problem with video capture device. Please verify that the video capture device is working correctly and is not already in use."
However, it is good to use AMCap,
what's the problem with FMLE.
Looking forward to your replies. Thx!

Did you ever figure out the problem/solution?
I am experiencing the same thing with my virtual camera filter when connecting to FME?
Shawn

I am having problems with video and high content webpages freezing. I am also getting pixel lines across my webpages. Maybe two or three lines. I was running os 10.4 but I just up graded to 10.6 the other day. I have 2GB of RAM.

I am having problems with video and high content webpages freezing. I am also getting pixel lines across my webpages. Maybe two or three lines. I was running os 10.4 but I just up graded to 10.6 the other day. I have 2GB of RAM.

Exactlly which model iMac do you have?
see > How to identify iMac models
Unfortunately that is not all that uncommon for the Early Intel iMac's given there age and the fact that the air intakes are probably choked with dust. Then add the extra heat caused by running a more intense OS X which is causing it to run a little warmer than normal and putting extra stress on the graphic and display components.
My 6½ year old 17" Early 2006 Core Duo w/2GB of RAM is also running 10.6.8 and is also starting to get a single line that (knock on wood) goes away after a few minutes, while many others started getting permanent ones after 2 or 3 years. One thing that I think has helped, is that about every 3 or 4 months I shutdown and vigorously vacuum out the bottom grill work and small vent under the stand to keep it running cool.
On that note: unfortunately I can only suggest that you clean your intake vents and hope that no permanent or irreversible damage has been done.

PROBLEms with videos imac G4 flat 17'

PROBLEms with videos in imac G4 flat 17'

It would help to know what videos you are having trouble with? Are these from specific internet links? Are these playing back commercial DVDs? Are these videos produced by iMovie, Final Cut Pro, or iDVD of home video? Are these videos imported from an external Firewire or USB adapter such as Elgato's devices. You give us little to go on. Please give us more details what is going on?

SB Xtreme Audio Notebook optical out problem with Home TheaterSystem-HELP!

JSB Xtreme Audio Notebook optical out problem with Home TheaterSystem-HELP!, I have this sound card connected?(optical OUT) ?to my home?theater system's digital IN ?through the recommended /8in. optical miniplug-to-optical SPDIF cable. Theater system is set correctly to Digital-In mode. I have no sound!
The cable is a Velocity Toslink-to-Optical Mini Plug digital cable. I don't see any settings in the Creative Console Launcher. The notebook is a Dell XPS M730 (Vista 32).
I have a PS3, DirecTV, and the SB Xtreme Audio Notebook cable on a hub switch that connects to the system's?one Optical IN. The PS3 and DirecTV sound perfect!
The sound card works fine with standard PC speakers. I'm at a loss as?to what to try next. I set this whole system up myself, so I'm pretty good at working out the kinks, except this one!
Karen

OK. I just went to Control Panel - Sound - Playback - Digital Output Device (SB Xtreme Audio Notebook) - Properties - Advanced. I experimented with different sample rates and bit depths. Clicked the test button and lo and behold - sound from the HTS! I've tried iTunes, PowerDVD (configured to digital output) and YouTube - no sound! Am I missing something really obvious?
HA! Just backed out to Playback and selected Digital Output Device (SPDIF) and set as Default. Sound is emunating from HTS! Well, that mystery is solved! Who knew.
Thanks anyway! Any comments or advice will still be appreciated.

Problem with video playback with iTunes

Several problems :
Problem with video playback with iTunes -
Since about a week, When I launch a video, it takes a long time to get started, then only the sound starts with no pictures - If I press pause then play the video is played normally. Did anyone face or heard about same kind of issue .
Problem with permission disk errors
After re-installing White Tiger and After I installed the last OSX 10.6.5 update
I found the following problem
Group differs on "Applications / Utilities / AirPort Utility.app / Contents / Resources / wanArrow.png", should be 0 instead of 80.
Last but not least :
My computer seems slow - I have 60gig free on My hard drive and I test my hard drive and everything seems all good .

What was the fix for this? Everything has sucked for my itunes video playback since the last major revision release.

I'm having problems with videos, they shake and the images break up back and forth into striped colors, how do I fix this?

I'm having problems with videos, they shake and the images break up back and forth into striped colors, how do I fix this?

1) This is because of software version 1.1. See this
thread for some options as to how to go back to 1.0,
which will correct the problem...
http://discussions.apple.com/thread.jspa?threadID=3754
59&tstart=0
2) This tends to happen after videos. Give the iPod a
minute or two to readjust. It should now be more
accurate.
3) This?
iPod shows a folder icon with exclamation
point
4) Restore the iPod
5) Try these...
iPod Only Shows An Apple Logo and Will Not Start
Up
iPod Only Shows An Apple Logo
I think 3,4, and 5 are related. Try the options I
posted for each one.
btabz
I just noticed that one of the restore methods you posted was to put it into Disk Mode First rather than just use the resstore straight off, I Have tried that and seems to have solved the problem, If it has thank you. previously I have only tried just restoring it skipping this extra step. Hope my iPod stays healthy, if it doesnt its a warrenty job me thinks any way thanks again

Error out problems with measuring frequency VI

I am having some error out problems with measure frequency VI. The instructions is change error out from indicator to control but does not work. Anyone can help? The VI is attached
Attachments:
Measure Frequency VI error.vi ‏27 KB

This VI does not have an error out. Obviously, you replaced a subVI that did have an error out with this one, otherwise you would not have been able to create this wire.
Simply remove the wire or save the subVI with another name then modify it to have the error out that you are looking for.
Hope that this helps,
Bob
Bob Young - Test Engineer - Lapsed Certified LabVIEW Developer
DISTek Integration, Inc. - NI Alliance Member
mailto:[email protected]

I cannot drop any pictures in iMovie 9 (no problem with video)

I cannot add any pictures in iMovie 9. I have no problem with videos, but when I want to drag and drop pictures, it does not work. (Pictures do not drop..) Does anyone know how to do?
Thank you a lot

You need to create a play list of songs that you would use for movies - mine is called Music for Movies. Then when you click on the music icon (the first box in the line of 5 in the grey bar across the lower third of the screen) and a drop down menu will appear showing all your play lists. Then simply drag and drop, but make sure that you hover over the video clip that you want to add the music to. If you don't the music will be added to the start of your presentation. You can always move the position afterwards. NOTE - if you want to add to your play list do it before you start your video editing as the list does not always update when I Movie.

Problem with Video capture Device

i have a problem with FME. i am using Avermedia TV capture
device and Canon 3ccd Digital Video Camcorder ( PAL ) when i open
the FME interface the warning given for " Problem with Video
Capture Device".
i read all the topics in Flash Media Encoder Category, if
this problem occures my capture device ( i expect MPEG ) how to
solve this problem?
Thanks,

The Device Matrix is something we'll be updating in the
future as we continue to test more and more equipement. Ideally, I
would like for users such as yourselves to be able to add to it and
tell us what has worked for you as well. If anyone has any ideas
about what technology we should use to do this (e.g., this forum? a
wiki?) please let me know.
Regarding the devices not working - the main problem we see
is that the system requirements are not being met. Here is what to
check for:
- are you running on Windows XP (only supported OS right
now)?
- do you have DirectX client runtime version 9c or higher
installed?
- do you have hardware acceleration enabled?
- do you have 32bit graphics enabled?
- do you have the latest direct show drivers from the
card/device manufacturer?
Thanks,
Chris Hock
Adobe Systems Inc.

Motorola SB5101E - problem with video chat

Hi. I have cable modem Motorola SB5101E and connect to net be cable TV .
All is normal , functional, audio, text, etc. but I have problem with video chat be iChat. (3,1) According info from Motorola support is this cable modem without firewall and without any ports, cable TV provider was inform me, so in his server is none block none ports for me, therefore I have maybe any problem in me computer. But Where ? Can you help me anyone ? Thank you in advance and have a nice day.

Hi Jirka:
Do you have your firewall active on your mac? (System preferences>Sharing>Firewall) If the firewall is on, you need to open some ports.
Report back and give us more details on your set up to troubleshoot your issue.

FMLE 3.0.0.4743 Problem with video capture device

log:
Tue May 05 2009 14:26:54 : Selected video input device: Beholder A/V Capture (SAA7135) [Slot 2]
Tue May 05 2009 14:26:54 : Selected audio input device: Beholder Aud Capture (SAA7135)
Tue May 05 2009 14:26:55 : Problem with video capture device. Please verify that the video capture device is working correctly and is not already in use.
Tue May 05 2009 14:26:56 : Audio Device Error : The selected audio device "Beholder Aud Capture (SAA7135)" doesn't allow setting volume intensity. Disabling the volume slider control.
Flash Media Encoder 2.5 working without any errors

The second message that you are getting "The selected audio device "Beholder Aud Capture (SAA7135)" doesn't allow setting volume intensity. Disabling the volume slider control." is because your device does not let you change intensity of volume. This warning message is just to tell user that volume slider will remain disabled for the selecetd device. This is new addition in FMLE 3.0 and was not there in FMLE 2.5
Also for first message, please make sure that no other instance of FMLE is already running using this device. You can verify this from task manager. If any other instance of FMLE is running then please close that instance so that device gets free for new instance.

Problem with video games

Hi all,
I have a problem with video games on Windows 8.1.
On my Windows 7 I could play all games without any problems.
Now I installed Windows 8.1 and I have problems with running video games: lower FPS, game breakdowns and sometimes even texture problems inside the game.
I tried to reinstall both Windows and Graphic drivers. I tried several versions of drivers.
I have Radeon HD 6870 and AMD Phenom II X4 955, SSD disk, 12 GB RAM.
The point is: the same games works perfect on Windows 7 but doesn't work right on Windows 8.1.
Can you, please, tell me if is there any other solution except going back to Windows 7 ?

Hi,
Please verify if these games are compatible with Windows 8.1.
If yes, please download and install the proper version of game file and driver.
Karen Hu
TechNet Community Support

IPod Touch 2nd Gen Video Out Problem with Apple Component Cable

I'm trying to get video out working with my iPod touch connected to my TV. Here's the information.
32 GB iPod Touch 2nd Gen
Apple Universal Dock (current version.)
Apple Component Out cable for iPod (current version that connects with a dock connector.
I've connected the component cables into the component video input on my TV. When I start playing any video (purchased off iTunes store in Standard Def,) I get a scrambled picture that appears to be the video, and no sound. I purchased the TV in South Korea and haven't gotten to test it yet on a TV back in the US. I have my video out settings with wide screen turned off and set to NTSC (South Korea uses NTSC.) I've also tried every setting combination, and switching the cable connections with the same or similar results. Sorry if a similar problem has been posted elsewhere, but after searching, I couldn't find any similar behavior. Any ideas on what might be the cause? I don't have any other component devices to check if the component on the TV is bad.

I've got that same problem: iPod Touch 2nd Gen, Apple Component Cables, and an HD TV.
The funny thing is, the cable works fine with an iPod Classic (160 GB) but not for the iPod Touch. Can anyone explain why that is?

Video out problem with Dynex 32" 720p TV

Hi folks. I bought my new Dynex TV a few days before New Years. It's great, really sharp, and I've had no problems with it. However, I do have a DVD recorder so I can record my games. Tonight, I attempted to use the A/V output on my TV and connected them to my DVD recorder (which plugs into my computer). I clicked "capture" and got an error telling me that a connection could not be established and that I should double check my cables. I could hear the audio playing through my laptop speakers just fine. I couldn't see the video, for some reason .
It's not the cables, I just took them off of my old TV to use them here.
What can I do? Should I return my TV?

What about output from a gaming console, like a PS3? Is that only digital sources or does it matter how the PS3 is connected to the television to determine if's its a digital or analog signal? Right now I get no output when I try to send the video of my PS3 to my composite video in on my computer's TV tuner card.

59000XT 128-VTD TV-Out problem with video.

Similar Messages

Maybe you are looking for