5900XT - What's the right driver?

versions 6172 and 6177 say in the description that they are for all Nvidia based cards but the readme.txt that downloads with both don't list the 5900XT as a supported card. Are these safe? Which one is newer/better?

BruceP,
Your best bet is always going with the nVidia ForceWare Drivers.
Take Care,
Richard

Similar Messages

What is the right driver for iPhone 4 for iTunes 10.2.1.1

I upgraded my itunes to 10.2.1.1 on Windows 7 and tried to upgrade my iPhone IOS to 4.2.1. Unfortunately, the apple recovery iBoot driver will not load and my iPhone has an USB cable icon pointed to an itunes icon and will not start.
I see four drives Apple recovery iBoot USB driver 6.0.9999.52, 6.0.9999.53, 6.0.9999.55 and usb composite. All these drivers failed to load into Windows.
What is the Apple recovery usb driver and how do I get the driver loaded so, y iPhone can start up?

Jac -
--Tom asked "what format are you capturing?"
1. What camera (that the Church owns?) are you using now? Does it record to a small Memory card or to tape? -- What make & model is it? HD or SD?
2. If the camera is storing to a media card, you can (a) copy the contents of the card to a thumb drive attached to any laptop at the church, take it home and import into Final Cut X there or (b) borrow the media card(s) and take it/them home.
3. What laptop computer do you and/or the Church presently own? What is the operating system version? How much memory, size/type of internal Storage? Any external hard drive storage? You mentioned that you own a Mac Pro at home. What model? (Apple Menu/About this Mac/System Information) What are its specifications?
    Almost any computer would be able to simply copy files using the finder - without using Final Cut Pro X for capture at the Church.
One can purchase 128 GB., USB 2/3 thumb drives for about $60 and up.
    If your Church's camera is a Tape based Camera, then you could just take the tapes home. No? "Capture" at home. Yes?
   You are currently capturing to an esata drive? which drive? which model Macbook Pro do you own?
   Finally, is your Church going to be purchasing whatever new equipment that you may need?

I would like to replace the hard drive cable for a 13" mid 2010 macbook pro. What is the right model of the hard drive cable?

i would like to replace the hard drive cable for a 13" mid 2010 macbook pro. What is the right model of the hard drive cable?

https://www.ifixit.com/Store/Parts/MacBook-Pro-13-Inch-Unibody-Model-A1278-Mid-2 009-Mid-2010-Hard-Drive-Cable/IF163-013-1
Apple Part #: 922-9062, 821-0814-A

What is the right way to move a directory to another drive?

When I move a directory to another location using drag and drop in the Elements 11 Organizer folder tree most, if not all, of the images become unlinked. What is the right way to move a directory and have the image paths updated in the Organizer database? Thanks.

Bazsl wrote:
When I move a directory to another location using drag and drop in the Elements 11 Organizer folder tree most, if not all, of the images become unlinked. What is the right way to move a directory and have the image paths updated in the Organizer database? Thanks.
That's something I just did successfully one hour ago...
I suppose your are in the 'folder' view with full folder tree, not in the 'My folder' view which only shows the lower subfolder level recorded in the database.
Do you try to move a folder with its subfolders ?

What's the right way to delete an entire backup ?

I've had two Macs doing wireless Time Machine backups to one Time Capsule.
Question: I got rid of one Mac, and want to delete its backup entirely (but leave the other computer's backups untouched). What's the right way to do it?

Bob Timmons wrote:
Jespes, welcome to the discussions!
Open your hard drive. Your Time Capsule icon should appear under the SHARED heading.
Click on the Time Capsule and a folder will appear to the right.
Double click the folder and you should see a xxxxxx.sparsebundle file for each computer that has been backing up.
Click on the xxxxx.sparsebundle file that you want to delete to highlight it and then click the gear shaped icon just above. Select Move to Trash. (Do not drag the file to the Trash as this will not work).
Be careful, as the file will be deleted instantly and you will not be able to retrieve it.
many thanks!

What is the right charger for a MacBook Pro 13" mid 2009 model?

What is the right charger for a MacBook Pro 13" mid 2009 model? I have two chargers for two different Mac and don't know which is thankswhich. I'm really looking for specific details such as voltage/watts and all the rest to idenify my charger. A link to where to web page where I could purchase the correct charger would also be very useful. Many thanks.
All help much appreciated. THANK YOU

Both power adapter I have are different (at the magnet end) from the one in link.
Earlier adapters have T shaped connectors, which Apple later changed to the L shape, presumably to make them more abuse-proof. Either one is fine and the one you are using will not damage your Mac.
Retina MBPs and new MBAs use a completely different MagSafe 2 connector which will not fit (without an adapter).

I have a early 2008 Macbook Pro, need to up grade the hard drive so that I can add a windows environment what is the largest drive that I can put in this computer? Is the storage size the constraint or the physical size of the drive? Or a combination?

I have a early 2008 Macbook Pro, need to up grade the hard drive so that I can add a windows environment what is the largest drive that I can put in this computer? Is the storage size the constraint or the physical size of the drive? Or a combination?

The largest capacity HDD that you can install is the HGST 1.5 TB HDD:
http://eshop.macsales.com/item/HGST/0J28001/
Any 2.5" 9.5mm thick SATA HDD will fit and operate in your MBP, regardless of capacity.
Ciao.
Message was edited by: OGELTHORPE

What are the right names for the 2 OHS?

Hi,
Currently we have 2 options for an HTTP Web Server for APEX:
- An Oracle HTTP Server (OHS) from the database companion CD.
- An Oracle HTTP Server (OHS) from the Oracle Application Server.
The first OHS is based on Apache 1.3.x and the second on Apache 2.0.x.
What are the right way to reference them so people know what your are talking about? In the manuals they are just called OHS but since they are not the same I would like to distinguish them some way. What do you call them?
Regards Pete

OK now I think got it:
OHS from the database companion CD and from the Application Server are both based on an Apache 1.3.x HTTP server.
On the Oracle Application Server companion CD is an OHS based on an Apache 2.0.x HTTP server. This release does not contain the mod_plsql module an can therefor not be used for APEX.
Regards Pete

Have a new PC desktop with 4 hard drives, new c, d and old c, d, My ipad library is in old c, how to get my itune open the right drive, it keeps on open in new c drive.

Have a new PC desktop with 4 hard drives, new c, d and old c, d, My ipad library is in old c, how to get my itune open the right drive, it keeps on open in new c drive. It said my computer is not authorized. I want to move all the old c to the new c drive, or get the itune to open my old c drive when I log in.

might be some help on one of these links.
Windows - Change iPad default backup location
http://apple-ipad-tablet-help.blogspot.com/2010/07/change-ipad-default-backup-lo cation.html
Windows - Changing IPhone and iPad backup location
http://goodstuff2share.wordpress.com/2011/05/22/changing-iphone-and-ipad-backup- location/
Sync Your iOS Device with a New Computer Without Losing Data
http://www.howtogeek.com/104298/sync-your-ios-device-with-a-new-computer-without -losing-data/
Syncing to a "New" Computer or replacing a "crashed" Hard Drive
https://discussions.apple.com/docs/DOC-3141
 Cheers, Tom

What's the right way to add a swipe handler to a DataGrid?

H All:
What’s the right way to add a swipe handler to a DataGrid?
(Target = Android, AIR using Flash IDE)
Adding a handler to the DataGrid works; but (as expected) it only works on the datagrid itself. Like if you swipe on the background before rows are fully added. Adding columns over the datagrid, prevents the datagrids’ swipe handler from firing.
Trying to add a swipe hander to the columns themselves, results in the below error.
// Below code fails with
// 1061: Call to a possibly undefined method addEventListener through a reference with static type
//   fl.controls.dataGridClasses:DataGridColumn. So ... DataGridColumn doesn’t support addEventListener...
There must be a better way(?).
Thanks
            import fl.controls.DataGrid;
            import fl.controls.dataGridClasses.DataGridColumn;
           // Works, but only on the grid itself; as when the rows do not fill the space tor the datagrid.
            myDataGrid.addEventListener (TransformGestureEvent.GESTURE_SWIPE, swipeGridHandler);
            var c1:DataGridColumn = new DataGridColumn("Notes");
            c1.width = 90;
            c1.cellRenderer = CenterAlignCell;
            c1.addEventListener (TransformGestureEvent.GESTURE_SWIPE, swipeGridHandler);

Adobe list of properties and methods:
http://help.adobe.com/en_US/FlashPlatform/reference/actionscript/3/mx/controls/dataGridCla sses/DataGridColumn.html

What is the right way to display a table in Java web dynpro using a node.

Hi experts,
I am trying to show a node of cardinality 0...n as a table in an adobe form in Java web dynpro. But its not showing it properly. Can anybody please tell me what is the right way to display a table on adobe form using a node of cardinality 0...n or 1...n in Java Webdynpro. In ABAP webdynpro, we can drag and drop a node of cardianlity 0...n or 1...n to show as a table and it works fine. Is the same possible in Java webdynpro also. Please help.
Thanks and Regards.
Vaibhav Tiwari.

Please refer to my post.. you will get the answer
Dynamic Table - same data repeating in all rows
Special care should be taken in designing the context for table attribute.
The attribute type singletone also plays a important role. I have this doubt from the beginning when you have reported this problem for the first time but finally you marked it as solved so i thought there might be some other issues but again when you reported that again i did some analysis.
Now coming to final solution :
For designing a table in adobe interactive form you have consider following
You have to design the view context upto three level, I am explaining you the properties
PDFDataSource (Parent Level1) - Cardinality 1:1 - Signetone -True - This is assigned to datasource
TableList (Parent Level2) - Cardinality (1:1) - Signetone -True
TableWrapper(Parent Level3) - Cardinality (0:n) - Signetone -True
TableData (Parent Level4) - Cardinality (0:1) - Signetone - false (This is the main point)
Then under TableData value node, you have to put all your table attributes.
This Value Node name can be anything but hierarchy should be same as I have mentioned above.
Please try out these steps and get back to me if you have any doubt.

What is the right way to connect the adapter to my macbook when charging?

what is the right way to connect the adapter to my macbook when charging.
is it connect the magsafe connector first before plugging the adapter to the outlet? or the way around? or both ways will do?
what if i'm using a surge protection with a on/off button, can I just turn the surge protector extension on and off without disconnecting the magsafe connector and adapter plug from my laptop when i'm not using it?
thank you very much

If there is any arcing it may be because the adapter is dirty. It is best to plug in the wall wart then attach the magsafe to the MacBook. As GfulDedFan mentioned this reduces the chance of power surging the MacBook. I have done mine this way since he day I bought it and have never had an arc. I keep it clean to reduce the chance of this happening. The following will help in the care of your supply.
Apple: Use and cleaning of MagSafe power connector

What are the right content conversion parameter in this receiver ?

Hi experts,
Can someone help me with setting right Content conversion parameter in the Receiver of File adpater(FCC).The output file must be fixed length text file.
Here is the receiver structure:
<Recordset>
    <Header>
       <f1>01</f1>
       <f2> </f2>
       <f3> </f3>
    </Header>
     <Body>
        <SubBody1>
              <field1 />
              <field2 />
              <field3 />
              <field4 />
              <field5 />
        </SubBody1>
         <SubBody2>
              <field6 />
              <field7 />
              <field8 />
              <field9 />
              <field10/>
        </SubBody2>
     </Body>
    <Trailer>
        <f1>03</f1>
        <f2> </f2>
        <f3> </f3>
   </Trailer>
</Recordset>
Also Body can occure multiple times in the file but still will have this structure...Header and Trailer can occure only once in file.
What are the right content conversion perameters in this case?
Appreciate your help asap!T
Thanks
Jon

<Recordset>
    <Header>
       <f1>01</f1>
       <f2> </f2>
       <f3> </f3>
    </Header>
     <Body>
         <SubBody>
              <field1 />
              <field2 />
          </SubBody>
          <SubBody>
              <field1 />
              <field2 />
          </SubBody>
          <SubBody>
              <field1 />
              <field2 />
          </SubBody>
        </Body>
    <Trailer>
        <f1>03</f1>
        <f2> </f2>
        <f3> </f3>
   </Trailer>
</Recordset>
if this is the input structure then FCC goes like this ....
Recordset:Header,Body,SubBody,Trailer
Header.fieldFixedLengths 10,20,30.. (based on you are structure fixed lengths)
Header.endSeparator - 'nl'
SubBody.fieldFixedLengths 10,20,20 (based on you are structure fixed lengths)
Body.endSeparator - 'nl'
Trailer.fieldFixedLengths 10,20,30.(based on you are structure fixed lengths)
Trailer.endSeparator - 'nl'
We might have to try out SubBody.endSeparator - 'nl' if Body.endSeparator - 'nl' does not insert a new line after each body record.
Cheer's

I have to transfer volume licensing CS6 design and web premium, but I don't know what is the right module. I've found many, all different...thanks

I have to transfer volume licensing CS6 design and web premium (between 2 End Users) but I don't know what is the right module. I found some, in Adobe's website, but all different...
One module for transferor
One module for recipient
One module for both parts
I filled the forms, I signed them , I called the assistance for case number and they've sent me another module:
one module for both of parts, without field for to insert serial number...
What have I do? Which module must I use? I'm becoming histeric!
Thanks to all for help
Letizia

Volume Licensing
http://helpx.adobe.com/x-productkb/policy-pricing/volume-licensing-site.html

What is the normal drive temp (F) for a 120GB HD MM running Snow Leopard?

What is the normal drive temp (F) for a 120GB HD MM running Snow Leopard?

Mine is usually in the low 40s.
Dah•veed

5900XT - What's the right driver?

Similar Messages

Maybe you are looking for