5c screen and beeping when charging

the top half of my screen lifted off my 5c, but the bottom half is still completely connected, it did work for a few hours, but not the screen, I could pick up the phone by the earphones, but the screen was completely black, then when I got home I tried to restart it (home button and lock button pushed down together) but since then it wont turn on, then I plugged it in to charge it, it beeped/blooped every 5 seconds
I tried to back up my photos but my computer said that my phone was full but there was no phtos on it (I have 6000+ photos on my phone that I really don't want to lose) it is still making that blooping sound.
what Is wrong with it?

Sounds like a hardware issue - if it only the screen - taking to an Apple store or authorized repair center may allow the screen to be repaired without having to erase the phone - but that is a hope not a guarantee
(936)

Similar Messages

5th Gen iPOD has white screen and beeps when center and menu button is held

My ipod was perfectly fine until I downloaded iPod Updater 2006-01-10...now, my ipod has a white screen, won't turn off (white screen stays on) and when I hold the center and menu button down, it does a 3 syllable beep. I've done the switching the hold button back and forth; resetting my ipod; restarting my PC; un-installing and re-installing both the itunes software and the ipod updater and still no working ipod. I am atleast trying to restore it to factory settings, but, I get an error message on the iPod updater screen. Can anyone help? Thanks!

everybody listen to babara hall, genius, it takes a while but reset it one more time using menu and selct and while its off for a few seconds push selct and play/pause, hold it for a long while, then let go and you'll see the apple logo and everything will go back to the way it was before.
p.s. thank you so much, ipods working great now, glad someone knows what there doing instead of apple,lol

My iMac 27" screen is black and will not start. The computer is making noise and beeps when i use the keyboard but I can't see anything. I have rebooted with no success

My iMac 27" screen is black and will not start. The computer is making noise and beeps when i use the keyboard but I can't see anything. I have rebooted with no success

Have a look at these. And please say what OS you have.
http://support.apple.com/kb/ts1411
http://support.apple.com/kb/ts1367

Why does iPhone beep when charging

My iPhone continues to beep when charging....can anyone tell me how to stop the beeping

When you say "beep" you mean the sound it makes right after you plug it in? If so, you might have a faulty cable or USB port, so your iPhone will beep everytime it gets disconnected and reconnected to the computer. If it's not that, try to describe the sound. Is it similar to what other sounds on iPhone system?
JP

Accidentally put the ipod touch in the washer. I put in a bag of rice but now it won't charge...I can see the battery icon on the screen and was on charge of over 4 hrs...any suggestions?

accidentally put the ipod touch in the washer. I put in a bag of rice but now it won't charge...I can see the battery icon on the screen and was on charge of over 4 hrs...any suggestions?

If/when it is dry
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar
Apple will exchange your iPod for a refurbished one for $199 for 16 GB 4G and $99 for the other 4Gs. They do not fix yours.
Apple - iPod Repair price

HT3910 Computer just shows apple icon screen and beeps with 3 beep intervals

Called apple support they sent me a link via email how to erase and reinstall-snow leopard 10.1.6
But when i do the procedure it starts and stays on the apple icon screen and beeps in 3 beep intervals thats as far as it goes

Locate the install instructions for your particular iMac on http://eshop.macsales.com/installvideos/
Remove each DIMM and then re-install per the instructions.

Ipod with a grey screen and beeps

I tired to change cases and when I tired to turn on the ipod, it had a grey screen and beeps twice every two minutes. I need help.

Is the screen suck ON with the gray screen? And reset does not work?
If so, I would disconnect from power and let it sit until it powers OFF by itself. Then try starting it or connecting it to power (if the battery is drained).

MacBook Pro won't boot - stays on black screen and beeps every few seconds

Hi,
My MacBook Pro has been having issues - when powered on wont boot past the white screen and more recently will just stay on black screen and beeps every 5 seconds. I had someone look at it and it seems apparently the motherboard is the problem
and either needs fixing or replacing. As I am traveling in Nicaragua the closest apple store is in Managua (capital). Would I be able to get the motherboard looked at and replaced if need be at this apple store? Also, does anyone know the approximate price for the motherboard to be replaced? Up until a few days ago the laptop was still turning on and working every now and then but now stays on black screen and beeps.
Any advice would be very helpful!
Thanks

Welcome to Apple Support Communities
It means that your Mac's memory is damaged > http://support.apple.com/kb/HT2538?viewlocale=en_US&locale=en_US
First, replace the memory modules. You can buy more memory at OWC or Crucial. It can also be replace by a reseller.
If it doesn't work, the RAM slots are damaged, so your logic board has to be replaced. It costs more than a half of the price of your MacBook

My ipod nano has a white screen and beeps twice, Can i fix it?

I left my ipod in my pants and they went througth th washer and dryer, I put them in white rice for two days and it still has the white screen and beeps twice, Can i fix it?

Hello Emmuhhlieee,
Thanks for using Apple Support Communities.
For more information on this, take a look at:
iPod nano (6th generation): Hardware troubleshooting
http://support.apple.com/kb/ts3474
Display shows a white screen
Try putting the iPod into disk mode:
Reset the device (press the Sleep and Volume Down buttons simultaneously until the display turns black—about eight seconds).
When the display turns black, hold down the Volume Down and Volume Up buttons simultaneously until the device enters Disk mode.
While the device is in disk mode, sync it to iTunes and try to restore.
Best of luck,
Mario

Ipod nano: white screen and beeping twice

I have an ipod nano 4th or 5th generation. When I try to turn it on, it displays a white screen and beeps twice. I have tried the basic things: toggling the lock switch, holding down select and menu buttons simultaneously, doing that and then holding down the play and select simultaneously. Even restored it. Updated all of my itunes software. Still broken. What next?

Hi
It seems to be ok now... I had to go out and it ran out of battery, when I switched it back on it appears to be fine.
If it happens again (hoping that it doesn't!) and i do the reset.. will that remove all the music that's on there?
Sorry for the ignorance
Thank you for the answer

So im trying to buy logic pro and just recently put enough money in gift cards on my account but every time i click buy app and go to billing info and then click ok it just shoots me to the first screen and did not charge for app how can i buy it ?

so im trying to buy logic pro and just recently put enough money in gift cards on my account but every time i click buy app and go to billing info and then click ok it just shoots me to the first screen and did not charge for app how can i buy it ?

This may sound stupid, but I'm gonna throw it out there anyway. Is it possible, that if I have enough junk on my desktop it might disrupt the signal? It seems odd, but it kind of looks like my signal is strong and relatively steady now that I've cleaned my desktop. I do tend to get very cluttered. I use a lot of reference images and save text clippings to use later... it just piles up very quickly.
So, I wonder if all that extra effort my system has to do keeping up with the junk might have something to do with the drop outs?

My iPod Nano (fourth generation) is stuck on a black screen and will not charge. It's done this before and you can still see a faint outline of the green charging sign and the time/date. HELP

My iPod Nano (fourth generation) is stuck on a black screen and will not charge. It's done this before and you can still see a faint outline of the green charging sign and the time/date. HELP

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

Red line and beeps when trying to apply Audio Filters in FCE

I'm using FCE 4.0.1 and am getting red line and beeps when trying to apply Audio Filters. I have rendered the files. No problems with audio otherwise.

Just as a point of clarification, you stated that you were "getting red line and beeps when trying to apply Audio Filters" Did you mean when you applied audio filters? Or just when you were trying to apply them?
What is the format, sampling rate and bit depth of the audio? Does it happen just with certain filters or with any filters applied?
-DH

I wonder about the colors in the program. When i work and later gonna print the text i have some problem. The color is not the same when im print it. One color on the screen and another when i print it why?

I wonder about the colors in the program. When i work and later gonna print the text i have some problem. The color is not the same when im print it. One color on the screen and another when i print it why?

I wonder about the colors in the program. When i work and later gonna print the text i have some problem. The color is not the same when im print it. One color on the screen and another when i print it why?

My phone keeps flashing and beeping when connection to iMac via USB

my hone keeps flashing and beeping when i connect it via the USB to my new Imac
cant understand why it will not work

peterjimmyclark,
One of your USB connections may be loose/not fully inserted, or it may be a bad USB cable. It happened to me once, when a powered USB hub was not properly seated.

5c screen and beeping when charging

Similar Messages

Maybe you are looking for