5D Mark II Hands on Preview

Here:
http://www.dpreview.com/previews/canoneos5dmarkII

It still exhibits a problem I saw with the 1Ds Mark II and the 5D where there is color noise in the dark colors a green magenta modeling the color is polluted in general not like the D3 or the D700.
I believe that the comparison of the sharpness of the canon to the D3 was done not in exactly a scientific way I read a brief note somewhere that the observer noted that the Cannon may have had a bit too much sharpening applied in the camera.
In other words you can stand on your head and do flips but you can't make some that is not rue true you can only make it seem to be with magic tricks and we all know there is no magic.
Rushing to judgment is I agree not a good thing but proclaiming a camera as being an advancement without ever getting your hands on one is not wise.
One has to keep in mind that these are jpegs and you usually see images form the D3 from a raw file. However what convinced me was that I saw some images posted of the D3 that were shot as jpeg and they did not exhibit this problem. So i tried it I have several images I shot of a project that were captured as jpeg and I was surprised to not see this problem using the D3 in the field. That really convinced me to buy it.
As far as casually shooting images on an afternoon walk or not could mean a really nice fee gone down the drain. Perhaps Larry Todie can afford to spend $3,000 on a camera and not return a profit but to me there is no such thing as casually shooting.
But I will offer my blessing to you larry and your hobbies expensive as they may be.
You should keep in mind that Linda is using her equipment for professional purposes
if she already has what she m=needs and no real compelling reason to upgrade then she may want to put the money elsewhere. It is an improvement no doubt about it. But I would not pass judgment on it until I got my hands on it and I will test it then and make my judgment based on the performance under the condition I use the cameras.
BTW Phil reading specs are meaningless you have to test it in the field.
My feeling n the Camera is that it is a fine piece of professional equipment but the next go around is probably what Linda wants. Though I think she should rent one or borrow one first after they become available.

Similar Messages

  • Pdf files open with question marks(??) in preview, need to view the file asap

    help me to solve this problem, need to view this files asap.

    Clear the cache and the cookies from sites that cause problems.
    "Clear the Cache":
    *Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"
    "Remove Cookies" from sites causing problems:
    *Tools > Options > Privacy > Cookies: "Show Cookies"
    Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance/Themes).
    *Don't make any changes on the Safe mode start window.
    *https://support.mozilla.org/kb/Safe+Mode
    There are other things that need your attention.
    Your above posted system details show outdated plugin(s) with known security and stability risks that you should update.
    *Shockwave Flash 10.0 r32
    Update the Flash plugin to the latest version.
    *http://kb.mozillazine.org/Flash
    *http://www.adobe.com/software/flash/about/

  • Tabs shown as exclamation marks in preview and pdf

    I’m having a problem for which there is probably a perfectly good explanation: when I add tabs to my Pages document, they show up as exclamation marks in the document preview and when I print the document as PDF. Is there any way to turn this off? Thanks, Cait

    Hello
    I'm unable to reproduce this problem.
    Something seems to be odd in your system.
    Always the same tracks:
    a - repair permissions with Disk Utility
    b - trash the preferences file:
    <bootVolume>:Users:<yourAccount>:Library:Preferences:com.apple.iWork.Pages.plist
    c - if it is not sufficient try to run Pages from an other user account for see.
    Yvan KOENIG (from FRANCE mercredi 27 février 2008 16:24:27)

  • Lightroom catalog/preview multiple folder merging

    I have had Lightroom since version 2, have upgraded all along and now have Version 4.2. I noticed as I ugradeed to Version 3, the catalog was still named Lightroom 2 catalog-2. Somehow, along the way, this is now Lightroom 2 Catalog -2-2. This is the catalog Lightroom defaults to. With Lightroom 4 I decided to rename these to: Mark's Lightroom 4 catalog and Mark's Lightroom 4 previews. Well, all I suceeded in doing is I now have 5 folders.
    Lightroom 2 Catalog-2Previews.lrdata with 21.1GB
    Lightroom 2 Catalog-2-2 Previews.lrdata with 1.6GB
    Lightroom settings with169KB
    Mark's Lightroom 4 Catalog.lrcat with 34.6GB
    Mark's Lightroom 4 Previews.lrdata with 4.78GB
    I also have these two folders with the square Lightroom icon:
    Lightroom 2 Catalog-2.lrcat 1GB
    Lightroom 2 Catalog-2-2.lrcat 1.01GB
    There is also the Backup folder and  tempary import and temporary import journal folders within the Lightroom folder.
    Windows 7 Ultimate, i7 quad core, new SSD c drive and new 3T Barracuda d drive.
    I do back up my d drive on an external hard drive and have put this Lightroom folder on a separate hard drive.
    Now, how do I merge those 5 folders into one l catalog and 1 previews folders with messing up.
    I have searched the website and watched Julianne Kost's video on merging but am needing a little more specific guidance to not mess this up!
    Thanks for any help you can give.

    It seems to me that you do not see the file endings since you say "I presume these are catalogs".
    The catalog is a file, not a folder, and - on Windows - does not have a yellow folder icon - although it can be (and usually is) within a folder. Open the folder - what do you see then?
    The previews on the other hand are in a folder.
    If you don't see the file endings go >My Computer >the drive where the catalog is on, select  >Tools >Folder Options >View tab.
    Make sure that the box that reads "Hide extensions for known file types" is not checked. If it is checked you won't see the file ending <  .lrcat> because it will be hidden.
    BTW that's on Windows but there must be something similar on Mac.
    RE: Previews folders: You just merge the catalogs. You don't have to do anything with the previews.
    I would suggest that you merge all of the catalogs you can find.You might have created the 1 GB catalogs inadvertyently.
    You could check though by going >File >Catalog, then navigate to the 1 GB catalog and click on it. Lr will open with it (afterclosing down the present catalog) and you'll see what it contains.
    If Lr cannot open it then there's not much you can do about. The catalog might be corrupt.
    Here's the address for Lr Help that shows you all the options available in <Import from Another Catalog:
    http://help.adobe.com/en_US/lightroom/using/WS9616DD60-0C3A-484b-8413-053347F21456.html

  • My 3.4.5 has ~ 35000 jpg masters.  I have set aperture not to create previews on import and have ensured "maintain previews" is not ticked.  Every time I start aperture it insists on creating previews for ~ 4300 images. Why?

    Having had the previews created I selected all photos and "delete previews".  It did this quickly and no more previews being created.  Once aperture is closed and then re-opened aperture immediately sets about creating the previews for the same photos.  I don't understand why this should be happening.
    This is occuring on my Mackbook Air (Aug 2012) which has 256 GB storage. I am fast running out of space as I am using "Managed Masters".  I intend to make the masters referenced by relocating them to an external HDD but before doing this would like to clear up this problem first. I keep my Vault on the external HDD and have Time Machine and Time Capsule.  When I have relocated the masters to the external HDD I intend that TM backs the external HDD to the TC.  I tink that I will use the second partition on the external HDD for Carbon Copy Cloner to back up the Mackbook Air.
    Any help or advice warmly welcomed.

    Frank
    Many thanks for your input.
    Following your advice I have selected all the projects individually and checked the status of Mantain Previews.  Some were indeed marked up for Mantail Preview so I have unmarked them.
    I have also selected Photos and deleted  previews and also repeated this for My Projects.
    Checking the Get Info for the Preview folder in Aperture Library in Finder this now tells me that I have zero bytes for 564 items.
    Close and then reopen Aperture and it regenerates these564 previews in the blink of an eye.  I haven't been able to locate these photos yet.  I know there are about 120 in facebook and 10 in photostream but dont know where the rest are.
    It seems the issue is not with Aperture but with myself and not understanding Aperture sufficiently well
    Do you see the problem this way?

  • Bridge CC / Continous preview regeneration?

    Hi!
    I recognized several times, that Bridge is regenerate the preview images very often.
    If I mark several images, the previews are regenerated. That is not so funny, as Bridge uses only one of my eight virtual CPUs (Intel Core i7 2600@3,4 GHz with four cores plus Hyperthreading) and it takes a while to build the previews of 300 or 400 images.
    My RAW-Cache is limited to 100 GB. The Bridge Cache is limited to 500.000 images. That should be more than enough for my round about 1.200 pictures.
    My Bridge provided by Photoshop CS 4 had no such issues.
    Is there anything known, or has Adobe imrpoved their software really so much, that it fails more and more? Sorry, but I had really big performance issues with Lightroom 5. And now it looks like, also Bridge has decreased the performance.
    Any idea, what I can do?
    Thanks!

    This is not normal behavior, previews should only regenerate when altering settings in ACR or save after having changed them in PS.
    There is a long thread about regenerating previews due to using the crop tool in ACR but that should be solved in ACR 8.2 or at least much improved and only affects files that have been cropped in ACR itself.
    I don't know the architecture of the software but it seems to use as much as possible automatically and can be very processor demanding. But having 8 cores and 32 GB RAM in my Mac I seldom see more then about 40 % (often less) usage for Bridge.
    For me using SSD and enough Resources Bridge seems still not fast enough but then again, I (like many others) only seem to be satisfied with real time behavior and that is still not realistic… , but seriously, I do think Bridge CC is very fast on my set up and using label or rating should not affect previews at all.
    Then again, I also use DNG files that write data in the file itself, if you have Raw with XMP side car then it should even be a lot faster (if possible because rating is almost real time already)
    Even if you have set to save ACR data to a central database instead of using this data in the side car xmp files then 100 GB is still way to much. I have the default setting with 1 GB and this contains data for about 1700 files, overwriting the oldest with newest. But as said, I don't need it at all because this data is already in the DNG file itself. When using xmp side car thes files contain the data also so there is no need to assign such large space for the Raw cache to my opinion.
    Having the slider for cache halfway is also more then suitable for most common use. Even with 250K files Bridge will be unusable due to large cache and slow behavior. It just is not a DAM like a dedicated DAM while a dedicated DAM is not capable for the pre process tasks Bridge is very strong at
    I would start checking ACR version (if you use crop tool very important to check) and restart Bridge holding down control key to both purge central cache and preferences.
    Also check a problem folder on hidden cache files. If there are such cache and Cache.T files from previous versions they can cause problems and new ones can also get you in trouble, just not a good feature to use at all in my opinion.

  • Printing with trim marks AND elements outside of the artboard

    hello, i am using Illustrator CS3. lets say i have a 4x6" artboard with my artwork contained in that space. i also have an adkey just outside my artboard. My goal is to be able to print both the trim marks (equal to my artboard size, 4x6) and my adkey. I cannot get the adkey to print by chaging the bleed settings, since i cant go over 1" bleed. i cant make my artboard bigger, since the trim marks wouldn't be 4x6 anymore. And i dont want to have to put trim marks by hand, since it is too time consuming.
    can anyone help?
    thank you.

    Yes, pretty much the only solution is to work on a larger artboard and use the crop mark filter. Personally, if I find myself having to work to a net size document, I slap it into Indesign and proof it out from there.
    Yours
    Vern

  • All my video clips within my movie have a yellow warning symbol in the lower left-hand corner. Can't seem to understand why. Help?

    All my video clips in an almost-complete movie now have a yellow warning symbol in the lower-left hand corner. How can I resolve this?

    It's hard to say - as You can select to use another one in another location - which I know nothing about.
    • to find out where iMovie tries to find material - As I remember it one put the pointer arrow ontop of one yellow exclemation mark and "Hands off" for some secondes - and it will tell.
    I use to do a quick - [Shift+cmd+3] to do a screen dump - so that I can read this address in full and try to set all material back to this location. iMovie can not be set to find it elsewhere - only alt is to re-insert material and now not move it - but this is most often a more tedious way - than just move material back to where iMovie tries to find it.
    • To set iPhoto to another Library
    - Start iPhoto - BUT KEEP - alt-key down during full up-start (also called the option key)
    - Now You can select another one
    Yours Bengt W

  • I like to use mac for phone calls but I cannot see hand off device feature in preferences

    Hi,
    I can send and recieve messages from my mac using IOS 8.1 and yosemite but unable to make phone calls. I check the video on how to make phone calls & it asking me to put a check mark under hands off device under general preference but somehow I'm not seeing that option on my computer. What I need to do?

    Handoff is limited to Macs with Bluetooth 4.0, which leaves many older Macs unable to access the new features. Additionally, even though the 2011 MacBook Air and 2011 Mac mini include Bluetooth 4.0, Apple has chosen to make both devices incompatible with OS X Yosemite's Continuity features.
    System requirements for Continuity on iPhone, iPad, iPod touch, and Mac - Apple Support

  • Psd previews in File Browser Windows XP

    Hello, is there any way to have previews of psd images instead of the icons in the File Browser? (I have windows XP)
    Thank you for help!
    Stacey

    Stacey789 wrote:
    Thank you very much for help!
    It is sad that such software doesn´t exist... But I remember when I had Photoshop 7 the previews were automatic, how come in the CS versions it isn´t possible?
    My friend has just told me about the shell extension and he said it works fine. Why Adobe says that it may lead to data loss? I mean how can an extension lead to data loss? I sounds pretty scary... But on the other hand the previews would be helpful... Is there any article about this matter?
    You are right that Photoshop 7 PSD files were visible as proper thumbnails.
    Then the data loss problem occurred. This was attributed to a file called psicon.dll.
    It never happened to me but there were definitely reported cases of it.
    The file was removed from later versions of PS but along with it went the ability to view PSD files as thumbnails.
    People have been complaining ever since and it seems to boil down to an incompatibility between Windows and Photoshop.
    The fix to get a copy of psicon.dll and put it back in the system works, but then you run the risk of losing data again.
    Since Bridge CS4 is so much improved over previous versions I now us it for browsing images.
    But it's still very annoying!

  • Possible to search annotation notes in Preview?

    I have several marked up PDFs — sections are highlighted with annotated notes — and I would like to be able to search within the notes (not the actual text of the PDF) using Preview. Is this possible? I can't seem to get it to work.
    Most of my PDFs were marked up using iAnnotate for the iPad. But I have also marked up some using Preview itself and still can't search the notes.
    Am I missing something?
    If not possible with Preview, is there other desktop software that would allow for this functionality?

    In addition to ronnie:
    The Cmd F function DOES work in the browser when the triangles that ronnie mentioned are folded open (pointing down; showing you all the markers). When the triangles are closed (pointing to the right; not showing markers) then CMD-F does not find your markers indeed...
    Rienk

  • How do you change default settings for Pdf document viewing?

    Somehow the default setting for all my PDF documents and photos is now ColorSync. How do I change the main default setting, which I think should be Safari?

    The default is Preview, and you change it thus:
    Select a pdf file, rightclick and select 'Get Info', in the pane that opens scroll down to the section marked 'Open With', select Preview and check the box to 'Change All'

  • Problem in UDF please Help?

    Hi all,
    Iam geting date and time stamp from source side and the format is like this
    07/10/09 11:12:48 from this i have to take only date.How to write the UDF for this do we have standard funtions for this in graphical mapping.the out put has to be like this 20071009.
    Regards,
    Phani

    Hi Phani,
    Do same as mention below:
    1. Date Trans Properties -
    > Format of Source Date, now click on question mark with hand symbol (F4 help) you will get new window.
    2. In new window under Date&Time Format: write yyMMdd and just bisede that in another box write or select HHmmSS
    3. Now under Date Separator select from dropdown box “/” symbol
    4. Under Time Separator select from dropdown box “:” symbol
    5. Under Date&Time Separator do not select any thing, I mean leave empty.
    Now press Create Pattern button.
    Do not close first window, now in the first window under
    Target Format---> In the input screen box manually input yyyyMMdd
    And press OK button
    Mapping:
    Target field -
    > DateTrans -
    > source field.
    Regards,
    Sarvesh

  • Archiving non-cumulative

    I'm trying to archive a non-cumulative infocube using BW 3.5.
    I followed the Appendix of this doc:  "How to Archive in BW (NW2004)" but the restoring doesn't work.  I must be missing something.  Can anyone point me in the right direction or maybe suggest what I might be missing?
    Here's what I get:
    Cube requests are compressed (updates the marker)  The BF datasouce feeds into this cube.  ( We do not use the BX datasource)
    On hand qty before archive:
    2/28  = 0
    3/1 - 3/14  = 150
    3/15 - 3/27 = 145
    3/28 = 148
    Archive #1 (Archive data that is <= 3/7/2011)
    On hand qty now is:
    3/8 - 3/14  = 150
    3/15 - 3/27 = 145
    3/28 = 148
    Archive #2 (Archive data that is <= 3/20/2011)
    On hand qty now is:
    3/21 - 3/27 = 145
    3/28 = 148
    Restore Archive #1 and #2 (Compressed, Didn't update marker)
    On hand qty now is:
    3/1  = 145 (WRONG)
    3/14 = 145 (WRONG)
    3/15 = 145
    3/28 = 148

    Ok, so if I restore the data back to the original cube, everything works perfectly!  So the problem must be in the multiprovider.
    Multiprovider includes 2 cubes:
    Inventory (Daily)   -
    > Original cube
    Inventory (Daily) 2   ---> Archive restore cube
    All characteristics are selected
    Identification (Each char is selected for each cube)
    All Time characteristics are selected
    All Key Figures are selected
    All key figures are selected for each cube
    Any ideas what might cause the copied cube/multiprovider to not work with non-cumulative fields?
    Thanks,
    Chris

  • Printing queries in prepared statement

    I have a created a prepared statement. When I execute the query I get an error stating that the SQL isn't correct. I would therefore like to print out the statement so I can see what it looks like. Here is what my code is doing.
    Create a query string with question marks.
    Hand that string off to the preparedStatement constructor.
    Modify that string using setString() One for every question mark.
    Send the query off by calling executeQuery()
    All I want to do is print out what the statement now looks like after the setStrings() are called.
    Thanks,
    -KAP

    That's not a featured guaranteed by the JDBC specification, and because of the way PreparedStatement really works, it can't be.
    You see, PreparedStatement usually does not do string replacement into your SQL; the SQL passed to the database still has the ?s in it and the values are bound later, in the database, to a compiled object that is no longer text.
    A few drivers will give you back the SQL statement if you apply toString() on the PreparedStatement, and maybe even given you the current values of the bind variables, but most won't.
    In fact, normally when you get have invalid SQL with a PreparedStatement, the SQLException is thrown on the prepareStatement method, before the set methods are called; if they're not, then you're probably trying to do an invalid implicit data type conversion. In other words, at least some of the columns in your database are not of character type, and the database is trying to convert your strings to the other type (using its rules, which may be different from Java's rules and may be different from another database's rules), and failing.

Maybe you are looking for

  • New Sleep Wake Issue

    Hey there MacBook owners. I seem to have a new issue with my MacBook not coming alive after I shut the lid and putting it to rest for the evening. I leave the computer asleep, rather than do a complete shutdown. But this morning when I was ready to g

  • Volume goes down automatically

    Sometimes when I lower the volume it continues down to 0. When I use the up button it will rise about 25%, then automatically go back to 0. Is this hardware or software problem? Solutions?

  • Is it possible to silence the external ringer on the Pre when using headphones?

    When I get a call on my Pre while using the headphones, I'd like to hear the ringer in my headphones only... Currently when I get a call it rings in the headphones AND via the external speaker. Can this be done and if so how? Post relates to: Pre p10

  • Ineligible for upgrade pricing?

    If you are ineligible for an upgrade can you purchase the iphone from the apple stores for the 8gb - 399 and 16gb - 499 prices or do you have to go to att store?

  • Comparison between Oracle BI and Cognos

    hi All, Can anyone tell me about the differences between Oracle BI and Cognos BI(8i)? Actually at the present time i m working on Oracle BI and later(after few days) i need to work on Cognos BI (8i). so if anyone has any stuff or link related to the