[5D Mark III] Why begins my custom file name with an underscore

Hi everybody,
I am confused. I have set up a custom file name (Menu Screen: "Set Up 1" -> "User Setting 2") with 3 individual letters and the used image size. I set it up as "RAW" so the output should be like "RAWL0001.cr2" but the filenames are always using underscores instead of the first custom letter: "_AWL0001.cr2".
I have also tried the "User Setting 1" which has 4 individual letters and no indication for the image size within the file name.
Same here.
What baffles me most, is that the manual states that it is not allowed to use an underscore on the first position.
Anybody an idea?
Regards,
Oliver
Solved!
Go to Solution.

Look up "Setting the Colorspace" in your manual.
You've set the camera to shoot in ADOBE RGB which isn't advisable for the majority of users.
"A skill is developed through constant practice with a passion to improve, not bought."

Similar Messages

Upgraded from Canon 5D Mark II to the new Mark III - unable to open RAW files

Have upgraded from a Canon 5D Mark II to the new Mark III - unable to open RAW files from the Mark III

Canon 5D Mark III is not a supported camera as of now.
For details, Check Camera Raw plug-in | Supported cameras

Custom File Name-Original File Number doesn't work. Why?

I want to export and rename some files with the "Custom File Name-Original File Number" option. Yet this doesn't seem to work, and I wondered what I might be doing wrong. The filename will only rename as the custom text.
The sample file name shown underneath has a dash after the custom text bit, but then the extension only eg Newname-.tif
I am now using LR 4.2 but I seem to remember doing this renaming OK with an earlier version (though I can't remember which). This suggest that either there is a problem with this specific version or that I have something set differently to the way I had it initially. I am hoping the latter is the case. Any suggestions as to how to fix this would be welcome!

I am sorry to report that i don't know how to create a screenshot. However, what I am getting, exact;ly is this:
From Library grid view: F2 or Library>Rename Photo
Then little screen appears with heading Rename Photo:
File Naming> set to Custom Name - Original File Number
Custom Text> NewFilenameHere
Example: NewFilenameHere-.tif
Clicking on OK changes the filename to just the custom text without the original file number. Original File name shows in metadata eg DSC01129-Edit.tif
The only way i seem to be able to get the original file number with the custom text is to include it manually as part of the custom text.

Custom File Name Format in B2B Console

Hi,
Please let me know if we can have a customized File Name Format in the B2B Console for the X12 EDI/XML Files.
I have read the Oracle doc and only the following formats are mentioned:
%FROM_PARTY%
%TO_PARTY%
%DOCTYPE_NAME%
%DOCTYPE_REVISION%
%MSG_ID%
%TIMESTAMP%
Is there a way to have a PO# (From the Trading Partner Payload) in the filename format?
You help is appreciated.
Thanks
Priyanka G

no. It has the format which helps B2B in identifying the agreement

Action hard codes custom file name

I recorded an action to crop and save for web. I have done this 1000's of times over the years, but in CS6 it is hardcoding a Custom File Name, and in the wrong format too boot.
I am saving as JPG only and accepting the default name, which should leave me with an action that has no custom name, yet it does, and the custom name is of an HTML file name.
So, when I run my action, it names every single file the same name, and never creates a jpg.
This is a new bug in CS6. It wasn't here before.
I can't figure out how to get around it????
Kirk

Figured out a way to work around this, but it is irritating. Instead of my action doing this:
Flatten
Crop (user interaction)
Save For Web
Close (without saving)
I have to do this:
Flatten
Save as JPG (in same directory where I want the Web file to go)
Crop (user interaction)
Save For Web (Over top last saved file)
Close (without saving)
For some reason, when I use the save as JPG, it doesn't custom code the file name and when I save for web in the same place it also doesn't custom code the file name.
I never had to do this before in all the years of using this type of action, and I use it ALOT!
I have found that it sometimes does not hardcode the file name, but there seems to be no rhyme or reason.
Kirk
Photoshop CS6 on Windows7-64, haven't tested this on my MBP

Why won't Lion file share with windows 7?

Why won't Lion file share with windows 7? Is there going to be a fix?

Verysafety shareing file...

When Photoshop CS6 is invoked from PSE 11 Organizer why is a new file created with _edited-1 appende

I just converted a large PSE 10 catalog to work with a downloaded trial version of PSE 11. When I brought up the Organizer and clicked on the Editor button I selected Photoshop CS 6. At that point the Organizer created an image stack with a new file on the top of the stack that had a file name that was the original file name with "_edited-1" appended to the end of it. Is there any way to avoid this? For me it is going to create a tedious step to delete the original file and rename the new file after editing. For probably 98% of my editing I will use only the Adobe Camera Raw editor on my imported raw files (Nikon's .nef). ACR puts the editing data in a sidecar .xmp file so there's no need to protect the original file from be mistakenly replaced by an edited version.

That's not a new behaviour : in old versions choosing the external editor did create a copy in a version set.
I don't have CS6, so I can't be specific, but I wonder why you should open CS6 if most of your images can be edited in ACR. For them, you only need to click 'Done' and that saves the edits in the xmp sidecar file. I guess most of the remaining files could be processed in the PSE11 editor and saved in any image format (jpeg, tiff, psd...). Only a minority would have to be processed in CS6***, and in that case, creating a new copy in a version set seems quite reasonable.
Edit:
*** in CS6 or the full ACR version of CS6. In my case, it's very rare that I need the other tabs in ACR.

Log4j custom file name

hi all
how do i set log file name with timestamp . say for example logfile_22_05_2008.log is there any option for this? anyone help me out of this. sorry if am crossposting my doubt

yaniv1977 wrote:
Hi
I hava some servers that use log4j to log in shared folder.
i want that every server will create his own log file with his host name.
I'm using log4j.xml to configure the appender and I want to use variable to create dynamic file name.
Could it passible?
And what happens to your distributed enterprise system when that shared folder is not available?

File name with symbols won't delete from trash.cache\trash\cache folder.

found this weird file name with symbols (squares nad the like) in the trash.cache\trash\cache folder. Can't seem to delete it from windows, can't get at from the dos prompt. Windows safe mode won't delete it.
Any suggestions as to what it is and how to get rid of it.
At present am trying reinstall of firefox and virus scan.
Thanks
Peter

I tried to do the instructions Adobe gave me but when
I put in the disc that came with my mac and hold down
C when it restarts it takes me to the screen to do a
fresh install.
At that point go to the Menu & select Disk Utility - I can't remember exactly which menu but you should be able to find it easily... there isn't too much there
I went into the disk utility through the Apps folder
and for somereason the option to repair isnt
highlighted and it wont let me click it. I tried to
repair permissions/verify but it doesnt change
anything. I looked at the info and it says the volume
can be repaired, but it wont let me.
You can't Repair the disk the system is currently running the OS from - That's why you have to boot from the Installer disk (or some other start-up disk). Repair Disk addresses directory structure issues - totally separate from what Repair Permissions does.
HTH|:>)
Bob J.

When I open up an e-mail attachment a box pops up PRINT TO FILE below that line OUTPUT FILE NAME with an empty line for the file name vs. simply going to my default printer?

when I open up an e-mail attachment a box pops up PRINT TO FILE below that line OUTPUT FILE NAME with an empty line for the file name vs. simply going to my default printer?

Make sure that '''''Print to File''''' isn't selected in the native print dialog box ''(see screenshot below)'' middle-right, and make sure your Printer is selected at the top of that dialog box.
''I'm a little confused why an email attachment would need to go directly to the printer, but that's what you asked about.''

FM for getting teh file name with path

Hi guys,
Is there an fm getting the file name with path given the physical path and file name? Thanks!

Hi Mark,
Function Module WS_FILENAME_GET is obsolete, dont use it.
Use the Method file_open_dialog of class cl_gui_frontend_services as given below.
DATA:
    lt_filetable TYPE filetable,
    lf_rc        TYPE i,
    lv_filename(50) TYPE c,
    lv_fileext(3) TYPE c,
    ls_file TYPE file_table,
    lv_file TYPE localfile,
    lv_title TYPE string.
lv_title = sy-title.
lv_progname = sy-cprog.
CALL METHOD cl_gui_frontend_services=>file_open_dialog
    EXPORTING
      window_title            = lv_title
      file_filter             = '*.txt'
      multiselection          = abap_false
    CHANGING
      file_table              = lt_filetable
      rc                      = lf_rc
    EXCEPTIONS
      file_open_dialog_failed = 1
      cntl_error              = 2
      error_no_gui            = 3
      not_supported_by_gui    = 4
      OTHERS                  = 5.
IF sy-subrc <> 0.
    MESSAGE ID sy-msgid TYPE 'S' NUMBER sy-msgno
               DISPLAY LIKE 'E'
               WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
    EXIT.
ENDIF.
* Number of selected filed must be equal to one.
CHECK lf_rc = 1.
* Access selected file
READ TABLE lt_filetable INTO ls_file INDEX 1.
CHECK sy-subrc = 0.
lv_file = ls_file-filename.
SPLIT lv_file AT '.' INTO lv_filename lv_fileext.
Revert back if you need clarifications.
Regards
Karthik D

Generating file name with date

Hello,
I try to create via ABAP a file name with date in it. Normaly my script must run but the script won't run. Please help. Thanks.
data = sy-datum. " = data set to sys date
data+6(2) = '01'. " = first day of month
data = data - 1. " = last day of last month
file name creation
p_filename+0(21) = '/sapio/flatfiles/xxx/'. " = first part of file name
p_filename21(6) = data0(6). " = second part of file name
p_filename+27(15) = '_XXXX_XXXXX.csv'. " = last part of file name
p_subrc = 0.
Regards, Thomas

Hi again!
Now I try it with your hints but now I got a save error.
program conversion_routine.
* Type pools used by conversion program
type-pools: rsarc, rsarr, rssm.
tables: rsldpsel.
* Global code used by conversion rules
*$*$ begin of global - insert your declaration only below this line *-*
* TABLES: ...
* DATA:   ...
data: data like sy-datum.
*$*$ end of global - insert your declaration only before this line   *-*
form compute_flat_file_filename
     using p_infopackage type rslogdpid
changing p_filename    like rsldpsel-filename
           p_subrc       like sy-subrc.
*       Insert source code to current selection field
*$*$ begin of routine - insert your code only below this line        *-*
* Datum wird gebaut
data = sy-datum. " = data set to actual date
data+6(2) = '01'. " = first day of month
data = data - 1. " = last day of month before
v_date = data+0(6).
* Dateiname wird gebaut
p_filename = '/sapio/flatfiles/XXX/'v_date'_XXXX_XXXX.csv'.
p_subrc = 0.
*$*$ end of routine - insert your code only before this line         *-*
endform.

Change file name with oreilly servlet

I am using oreilly servlet package and I want to change the file name to the file I am uploading, is this possible ?
How ?
Thanks.
here I post the servlet code:
package com.reducativa.sitio.servlets;
* DemoParserUploadServlet.java
* Example servlet to handle file uploads using MultipartParser for
* decoding the incoming multipart/form-data stream
import javax.servlet.*;
import javax.servlet.http.*;
import java.io.*;
import com.oreilly.servlet.multipart.*;
public class DemoParserUploadServlet extends HttpServlet {
public void doPost(HttpServletRequest request, HttpServletResponse response)
throws ServletException, IOException {
PrintWriter out = response.getWriter();
response.setContentType("text/plain");
out.println("Demo Parser Upload Servlet");
File dir = new File("f:/");
if (! dir.isDirectory()) {
throw new ServletException("Supplied uploadDir " + "f:/ " +
" is invalid");
try {
MultipartParser mp = new MultipartParser(request, 10*1024*1024); // 10MB
Part part;
while ((part = mp.readNextPart()) != null) {
String name = part.getName();
if (part.isParam()) {
// it's a parameter part
ParamPart paramPart = (ParamPart) part;
String value = paramPart.getStringValue();
out.println("param; name=" + name + ", value=" + value);
else if (part.isFile()) {
// it's a file part
FilePart filePart = (FilePart) part;
String fileName = filePart.getFileName();
if (fileName != null) {
// the part actually contained a file
long size = filePart.writeTo(dir);
out.println("file; name=" + name + "; filename=" + fileName +
", filePath=" + filePart.getFilePath() +
", content type=" + filePart.getContentType() +
", size=" + size);
else {
// the field did not contain a file
out.println("file; name=" + name + "; EMPTY");
out.flush();
catch (IOException lEx) {
this.getServletContext().log("error reading or saving file");
}

Hi there,
I am facing the same problem that you have stated in your Feb 26, 2002 10:28 AM message regarding "change file name with oreilly servlet", I would like to change the file name to include a unique identifier upon upload, did you ever find a solution to your problem?
Thanks!
Todd
[email protected]

I am using OSX 10.9.5 and Outlook Web App for emails. When I download an attachment it replaces the space in the file name with - how can I change this?

I am using OSX 10.9.5 and Outlook Web App for emails. When I download an attachment it replaces the space in the file name with %20 - how can I change this?

Click on the below link :
https://get.adobe.com/flashplayer/otherversions/
Step 1: select Mac OS X 10.6-`0.`0
Step 2 : Safari and FIrefox
Then click on " Download Now" button.

FILE NAME WITH FILE EXTENTIONS

HI EXPERTS!!
I WANT TO GET THE FULL FILE NAME STRORED IN THE SERVER FOLDER. I USED FM RZL_READ_DIR_LOCAL BUT I AM GETTING ONLY 32 DIGITS OF NAME NOT FULL NAME AND ALSO SIZE PARAMETER IS CONCATENATING WITH NAME.
I WANT THE FILE NAME WITH FILE EXTENTIONS(TXT. .PDF ETC)..
PLZ SUGGEST ME HOW TO GET THE SAME..
PLZ REPLYE ME..
MAHESH

Hi Mahesh,
Try the below FM in the below code.
DATA:
    LV_PERMISSION(10),                 " Permission
    LV_H2,                             " H2
    LV_FLNM(13),                       " File name
    LV_USER(10),                       " User
    LV_GROUP(10),                      " Group
    LV_SIZE(15),                       " Size
    LV_MONTH(3),                       " Month
    LV_DAY_C(2),                       " Day
    LV_YEAR(5),                        " Year
    LV_FILE_NAME       TYPE FILE_NAME, " Filename
    LV_JUNK,                           " Junk
    RETURN_CODE      TYPE I.           " Return code
DATA:
    CMD_PARAMS LIKE SXPGCOLIST-PARAMETERS,
                                       " External prg.parameters
    CMD_OUTPUT TYPE BTCXPM OCCURS 0,   " Log message
    STATUS TYPE EXTCMDEXEX-STATUS.     " Status
CONSTANTS:
    LC_DIR TYPE C VALUE 'd'.           " Directory
FIELD-SYMBOLS: <CMD_OUTPUT_LINE> LIKE LINE OF CMD_OUTPUT.
CMD_PARAMS = PV_DIRECTORY.
CLEAR CMD_OUTPUT.
CALL FUNCTION 'SXPG_CALL_SYSTEM'
       EXPORTING
            COMMANDNAME                = 'Y_LS_LN'
            ADDITIONAL_PARAMETERS      = CMD_PARAMS
       IMPORTING
            STATUS                     = STATUS
            EXITCODE                   = RETURN_CODE
       TABLES
            EXEC_PROTOCOL              = CMD_OUTPUT
       EXCEPTIONS
            NO_PERMISSION              = 1
            COMMAND_NOT_FOUND          = 2
            PARAMETERS_TOO_LONG        = 3
            SECURITY_RISK              = 4
            WRONG_CHECK_CALL_INTERFACE = 5
            PROGRAM_START_ERROR        = 6
            PROGRAM_TERMINATION_ERROR = 7
            X_ERROR                    = 8
            PARAMETER_EXPECTED         = 9
            TOO_MANY_PARAMETERS        = 10
            ILLEGAL_COMMAND            = 11
            OTHERS                     = 12.
Check Status first then check sy-subrc
CASE SY-SUBRC.
    WHEN 0.
      CASE STATUS.
        WHEN 'F'.
          MESSAGE I057(YS) WITH 'SXPG_CALL_SYSTEM'(002).
          GF_EXIT = GC_TRUE.
        WHEN 'E'.
          MESSAGE I058(YS) WITH 'SXPG_CALL_SYSTEM'(002).
          GF_EXIT = GC_TRUE.
        WHEN 'S'.
          MESSAGE I059(YS) WITH 'SXPG_CALL_SYSTEM'(002).
          GF_EXIT = GC_TRUE.
        WHEN 'C'.
          MESSAGE I061(YS) WITH 'SXPG_CALL_SYSTEM'(002).
          GF_EXIT = GC_TRUE.
      ENDCASE.                         " CASE STATUS.
    WHEN 1.
      MESSAGE I048(YS) WITH 'SXPG_CALL_SYSTEM'(002).
      GF_EXIT = GC_TRUE.
    WHEN 2.
      MESSAGE I049(YS) WITH 'Y_LS_LN'(003).
      GF_EXIT = GC_TRUE.
    WHEN 3.
      MESSAGE I050(YS) WITH 'SXPG_CALL_SYSTEM'(002).
      GF_EXIT = GC_TRUE.
    WHEN 9.
      MESSAGE I054(YS) WITH 'SXPG_CALL_SYSTEM'(002).
      GF_EXIT = GC_TRUE.
    WHEN 10.
      MESSAGE I055(YS) WITH 'SXPG_CALL_SYSTEM'.
      GF_EXIT = GC_TRUE.
    WHEN 11.
      MESSAGE I056(YS) WITH 'SXPG_CALL_SYSTEM'(002).
      GF_EXIT = GC_TRUE.
    WHEN OTHERS.
      MESSAGE I022(YS) WITH SY-SUBRC.
      GF_EXIT = GC_TRUE.
ENDCASE.                             " CASE SY-SUBRC.
IF GF_EXIT = ' '.
    READ TABLE CMD_OUTPUT ASSIGNING <CMD_OUTPUT_LINE> INDEX 1.
    IF SY-SUBRC = 0.
      CONDENSE <CMD_OUTPUT_LINE>-MESSAGE.
      IF <CMD_OUTPUT_LINE>-MESSAGE CS 'total' OR
         <CMD_OUTPUT_LINE>-MESSAGE CS 'TOTAL'.
        DELETE CMD_OUTPUT INDEX 1.
      ENDIF.
    ENDIF.
    LOOP AT CMD_OUTPUT ASSIGNING <CMD_OUTPUT_LINE>.
      CONDENSE <CMD_OUTPUT_LINE>-MESSAGE.
      SPLIT <CMD_OUTPUT_LINE>-MESSAGE AT SPACE INTO
                                      LV_PERMISSION
                                      LV_H2
                                      LV_USER
                                      LV_GROUP
                                      LV_SIZE
                                      LV_MONTH
                                      LV_DAY_C
                                      LV_YEAR
                                      LV_FILE_NAME
                                      LV_JUNK.
      IF LV_PERMISSION(1) = LC_DIR.
        CONTINUE.
      ELSE.
        LV_FLNM = LV_FILE_NAME(13).
        TRANSLATE LV_FLNM TO UPPER CASE.
        IF LV_FLNM = '1W_FIARFUNNEL'.
          PT_FILE-FILE_NAME = LV_FILE_NAME.
          APPEND PT_FILE.
        ENDIF.                         " IF LV_FLNM = '1D_FIARFUNNEL'.
      ENDIF.                           " IF lv_permission(1) = ...
    ENDLOOP.                           " LOOP AT CMD_OUTPUT
ENDIF.                               " IF GF_EXIT = ' '.

[5D Mark III] Why begins my custom file name with an underscore

Similar Messages

Maybe you are looking for