5d3 Working in LR4, But No Calibration Profiles?

I'm successfully using the DNG Converter 6.7 RC to get my 5d3 photos into LR4, but it appears the only profile available under Camera Calibration is Adobe Standard. Typically I like to start from Camera Neutral.
Is this correct, or am I doing something wrong?

The part about waiting for 4.1 to have profiles available is a very good guess, but I strongly suspect that they will work with the DNG files, as well.
Hal

Similar Messages

Lightroom: Why does auto white balance no longer work after changing the camera calibration profile?

I'm using NEF raw files from Nikon.
Lets say for example I import a NEF file into Lightroom (v4) and click on 'auto' for white balance. The white balance in the image is adjusted correctly (somewhat). However, if I then change the camera profile (in the camera calibration section) from 'adobe standard' to 'camera standard' then the white balance in the image becomes very wrong. I then have to set the white balance back to 'as shot' and correct it manually instead.
Why would 'auto white balance' no longer work just because I change the profile from 'adobe standard' to 'camera standard'?
Any ideas?

Works as expected here...
Which Lr version and what OS??

HT204387 BOSE Bluetooth wireless headphones work with iPhone but not iMac - Profile issue I assume - but why not!!!!

I have a great pair of BOSE wirless headphones that connect faultlessy to my iPhone. I'm very dissappointed however to find that I cannot use the same headphonse on my iMac or my MacBook Air. I assume it's a bluetooth profile issue but in product utility terms it makes no sense. Is anyone aware of a way of circumventing this resytiction (e.g. third-party product, mac setting,...etc)?

Yes. This has to be the 8.xx iOS.
I have experienced this since purchasing the 6+. Now, I attempting to pair the phone to Sync in my Ford F150, it
can't find the phone. I go through any number of attempts: rebooting the phone, finding a bluetooth device on Sync, etc.
Most of the time it shows a "cannot find bluetooth device". Or the Sync shows a pairing number to type in the phone in order
to pair, but the iPhone doesn't see Sync, so nothing can be done.
Sometimes, and I mean only sometime, the device is paired by itself. (On sync, "choose input: usb or bluetooth" and trying this
several times, Lo and Behold.....wait for it......the iPhone 6+ connects!
This is not what I had, an iPhone 4S, that one pairing, and always paired. (truck off, crank and instantly paired). The old days!
I have check Ford to look for an update. I have the latest from 2012. The final one for my truck model year.
This version of iOS needs works and must be updated again.
I don't know who to contact at Apple but the mods here don't say how to do that. It another Apple waiting and see.
If I find a solution, I will post it immediately. I hope you will post as well. Thanks for reading.
M.

I just created a new profile/user on my MacBook Pro. My pointer/mouse. It works fine in my older user profile, but when I go to the new profile my mac will not respond to clicks. Mouse moves but will not click. Already tried restarting and the pram zap.

I just created a new profile/user on my MacBook Pro. My pointer/mouse on my trackpad. It works fine in my older user profile, but when I go to the new profile my mac will not respond to clicks. The Mouse moves but will not click. Already tried restarting and the pram zap. The problem starts when I log out of my main profile. I get to the login screen and my laptop stops responding to clicks. When I manage to make my way back to my main profile the mouse works perfectly. Should I just delete the new profile and try again?

If the modem is also a router, either use the modem in bridge and run pppoe client on the TC.. that is assuming ADSL or similar eg vdsl. If it is cable service.. and the modem is a router, then bridge the TC.. go to internet page and select connect by ethernet and below that set connection sharing to bridge.
Please tell us more about the modem if the above gives you issues.

I have been having a issue with getting the colors on my monitor to match the colors fro my print lab. I now have the monitor calibrated to match the prints but when I open elements it doesn't use the same colors. If i have it use the calibrated profile b

I have been having a issue with getting the colors on my monitor to match the colors fro my print lab. I now have the monitor calibrated to match the prints but when I open elements it doesn't use the same colors. If i have it use the calibrated profile by changing the color management settings, the color picker no longer shows true white or black. How do I get elements 12 to honor the new calibrated settings?

Ok so I've done what you said and this is what it's come back ....
I don't know that these are the errors , but they're the things which don't look right ...
Throughout the shut down there is a recurring line ;
It says ;
Com.apple.launchd 1 0x100600e70.anonymous.unmount 301 PID still valid
Then there are 2 more which I think are related ;
Com.apple.securityd 29 PID job has I overstayed its welcome , forcing removal.
Then the same with fseventd 48 and diskarbitrationd 13
Oh and on Launchd1 : System : stray anonymous job at shut down : PID 301 PPID13 PGID 13 unmount...
Then the last process says "about to call: reboot (RB_AUTOBOOT).
Continuing...
And stops ...
Hope this means something to you ... Thanks again for your help so far :-)

Updated to LightR 2.7 but lost Leica M9 calibration profile

Hi,
Just converted from LightR 2.6.1 to 2.7 - looks ok - but I cannot choose Leica M9 camera calibration profile in development module now. I still have a Leica file M9DigitalCamera18Sept09.dcp on my desktop. How can I imoport this into the program?? Why is this file not included in 2.7?
Thanks for help,
/Anders

Eric, this helped a little bit.
I ran Repair Disk Partition on Disk Utilities and after rebooting I received a password prompt when trying to modify the Color Profiles directory on the boot drive. After typing the password, I was able to make the change. So, that's a bit of progress.
However, when I ran the color profiler app, it still did not allow me to make the changes at the system level. From xRite's FAQ, I need system privileges to do that, but as I'm logged in as a user I should have it.
I ran another test. I created a new test user with Admin privileges to see what would happen. When I logged in under this test account, I could not even see the boot drive in Finder. Nor could I see the parent Apple's MacBook Pro icon which, when I'm normally logged on, shows the Boot Drive, the Data drive, and a network icon as well as grayed out home and net icons.

CP1525nw. Works Fine. But fan comes on often. Calibration set to 168 hrs. Is that normal. 73 deg.

CP1525nw. Works Fine. But fan comes on often. Calibration set to 168 hrs. Is that normal. 73 deg.

Here is a link to the User Guide Manual that has the recommended physical and environmental specs for your particular printer. Hope you find this helpful.
http://h10032.www1.hp.com/ctg/Manual/c01945700.pdf
If I helped you at all it would be great if you clicked the blue kudos star!
If I solved your post please mark it as solved to help others.
I'm a printer tech with HP.

I am interested in mirroring my calibrated mac monitor to a led tv but the tv profile takes over and negates my monitor profile. I want both to be calibrated to the same standard. Suggestions?

I am interested in mirroring my calibrated mac monitor to a led tv but the tv profile takes over and negates my monitor profile. I want both to be calibrated to the same standard. Suggestions?

I am interested in mirroring my calibrated mac monitor to a led tv but the tv profile takes over and negates my monitor profile. I want both to be calibrated to the same standard. Suggestions?

What is the rationale behind the "Adobe Standard" color calibration profile?

Hi! I'm trying to figure out how to make the most of the various color calibration profiles Adobe offers for my cameras with Lightroom 5. I do understand the purpose of the camera-specific options--they're designed to help approach camera JPEG processing mode colors. And they work wonderfully--they're very helpful!
But I don't really understand the purpose of the "Adobe Standard" calibration option. What is it for? Why does it look the way it looks? Has it been designed to ease certain processing goals? To enhance certain colors or tonal combinations? Is it designed to be more accurate than the manufacturer profiles in some way? What can I do with "Adobe Standard" that I can't do with one of the camera-specific calibration options?
I would find it *extremely* helpful if someone who's involved with the engineering behind Lightroom's color (or anyone else who's especially knowledgeable about Lightroom's design) might talk a little bit about why "Adobe Standard" looks the way it looks. What's it for? To what purposes can I leverage it?
Thanks so much!

MarkJoseph wrote:
I would find it *extremely* helpful if someone who's involved with the engineering behind Lightroom's color (or anyone else who's especially knowledgeable about Lightroom's design) might talk a little bit about why "Adobe Standard" looks the way it looks. What's it for? To what purposes can I leverage it?
Adobe Stadnard is the name for the individual profiles Adobe builds for each camera it receives. A new camera ships, Adobe gets their hands on one and builds a profile with that sample. It isn't suppose to mimic the in-camera JPEG settings, I don't believe it's supposed to mimic anything but instead produce what is (and quotes are super important in this context) the most 'accurate' color response from the target they use to create the profile. But here's the rub. Not all cameras from the same make and model behave identically. Adobe simply can't get piles of the same body and build then average that response. So they provide a means for you to build your own custom DNG camera profile and for differing illuminates. So if you want to leverage it, you'd get a target (MacBeth 24 patch, X-rite Passport) and build your own custom profile. It can really help depending on how your sensor deviates from the sensor Adobe got to build their profiles.
For more info on DNG profiles and rolling your own:
In this 30 minute video, we’ll look into the creation and use of DNG camera profiles in three raw converters. The video covers:
What are DNG camera profiles, how do they differ from ICC camera profiles.
Misconceptions about DNG camera profiles.
Just when, and why do you need to build custom DNG camera profiles?
How to build custom DNG camera profiles using the X-rite Passport software.
The role of various illuminants on camera sensors and DNG camera profiles.
Dual Illuminant DNG camera profiles.
Examples of usage of DNG camera profiles in Lightroom, ACR, and Iridient Developer.
Low Rez (YouTube):
http://youtu.be/_fikTm8XIt4
High Rez (download):
http://www.digitaldog.net/files/DNG%20Camera%20profile%20video.mov

Can't get any camera calibration profiles to show up

I am using lightroom 5 on a windows 8 pc and can not get any camera calibration profiles to show up. I have 14 profiles for my Sony SLT-A65 in my cameraprofiles folder and a corresponding camera folder with also has these profiles. I have checked all file attributes and the only thing I see differrent from some other camera profiles is the file ownership is adminisrator instead of system. Also Photoshop does not see any camera calibration profiles either. I have done a lightroom installation repair from original disk which didn't fix. I have all my lens profiles which work fine. I have tried renaming profiles from SLT-A65V to SLT-A65 to match what shows up on displayed file information. Can't think of anything else. Can anyone help??

I have since corrected this issue. I downloaded adobe DNG profile editor and loaded the camera profiles I had and then saved them. At this point all of them showed up in Photoshop and Lightroom. Don't know what the difference was but they are seen now by my programs.
Thanks for the reply

Camera Calibration Profiles - Help...?

I downloaded LR 2.0, then downloaded the beta camera profiles and the DNG Profile Editor. I ran the installers, then started LR. But the only Camera Calibration Profile available is "Embedded".
What am I missing here.....

They only work on raw files, not developed images.

Camera calibration profiles doesn't read by LR above v4.2

Hello!
I have some custom camera calibration profiles for my camera installed in /Library/Application Support/Adobe/CameraRaw/CameraProfiles/Camera/Camera-name
Everything works fine in LR 4.0-4.2 but this profiles missing in 4.3 and above. Placing profiles into LR.app/Contents/*/*/* didnt help too.
So what is wrong with LR?
4.2
4.3-4.4

Which location are you speaking of?
MacHardDrive /Library/Application Support/Adobe/CameraRaw/CameraProfiles/Camera/Camera-name
or
Users/User Name//Library/Application Support/Adobe/CameraRaw/CameraProfiles/Camera/Camera-name
As a test, if you copy one of the missing profiles to the other location does it then show up?

Lr4 Available Lens Correction Profiles

Hi, I recently purchased LR4 - 4.2 (as a download) and installed in onto my PC, running Windows 7, 64bit. I cannot get the "Lens Corrections" tool, to work correctly. When editing images, the lens correction tool, only displays a small sample size (like 4 or 6 lenses approx.), of lenses to choose from, however (only once) it displayed a complete lists of lenses to suit my Nikon D800E, including the lens profile I required at the time, being the Zeiss 50mm f1.4, so I am aware that Lr4 is capable of facilitating my lens profile requirements. I have previously seen a comprehensive list displayed within Lr4, but it had disappeared? I am unable to solve this issue myself-sorry. This is frustrating, can you please help me rectify this issue. In the mean time, I have resorted to using the ePaperPress product, PT Lens-which has helped me immensely.. Thank you.

The Zeiss 50mm F1.4 has very low distortion and virtually no vignetting at F2 and above. I doubt you will see much correction using a lens profile with it except perhaps at F1.4. Just make sure you have 'Remove Chromatic Aberration' checked under the 'Color' tab as your LR 'Default' setting, which is lens independent.
As Lee Jay pointed out you probably saw more profiles (only once) because it was a NEF raw format file. Unless you have a good reason to shoot only in JPEG format with your Nikon D800, I'd set it to shoot NEF raw files or raw +JPEG. If interested there is a lively discussion on this very topic:
http://forums.adobe.com/message/4855041#4855041

How do I work with FK in a data profile?

Hello People:
I am new in OWB tools and I have many doubts. Therefore, I would like to know if anyone can guide me a bit with the theme of FK and profiles.
How do I work with FK in a data profile?
If I have a table that has a FK to most of the tables, because it is like a parent table. What should I do to have that FK in the profile?
e.g.
- Table 1 FK Table 2
- Table 1 FK Table 3
- Table 1 FK Table 4
- Table 1 FK Table 5
- Table 1 FK Table 6
- Table 2 FK Table 7
- Table 2 FK Table 8
- Table 8 FK Table 9
You should have a data profile with each table or a data profile for all related tables?
If I am all in a single profile, that it would have no problem but I would only slow every time that I have to add a new table, but if I got separated, I can not use the FK? What is the solution that will give this problem?
e.g. PROFILE GENERAL
- Table 1
- Table 2
- Table 3
- Table 4
- Table 5
- Table 6
- Table 7
- Table 8
- Table 9
OR
PROFILE 1 -> - Table 1
PROFILE 2 -> - Table 2
PROFILE 3 -> - Table 3
PROFILE 4 -> - Table 4
PROFILE 5 -> - Table 5
PROFILE 6 -> - Table 6
PROFILE 7 -> - Table 7
PROFILE 8 -> - Table 8
PROFILE 9 -> - Table 9
OR
PROFILE R -> Table 1 / Table 2
PROFILE S -> Table 1 / Table 3
PROFILE T -> Table 1 / Table 4
PROFILE U -> Table 1 / Table 5
PROFILE V -> Table 1 / Table 6
PROFILE W -> Table 2 / Table 7
PROFILE X -> Table 2 / Table 8
PROFILE Z -> Table 8 / Table 9
Thank you very much for your help!
Best regard!

Any idea, please?

IPod Shuffle 2nd Gen. not working, music plays but doesn't sync\

Hello,
I have an iPod Shuffle 2nd Gen since a long time and it always worked perfectly. But now it has stopped working well. It has music stored inside and it plays it, it evencharges from the pc, but doesn't sync in iTunes, nor it shows up on Desktop. On iTunes the message in Italian says idt couldn't be identified and to reconnect the iPod and retry. I tried the Reset Utility but it says my iPod isn' supported even if it is a 2nd Gen iPod. The only positive thing is it shows up on System Profiler.
I tried also turning off the iPod for 5 seconds and turning it again on, but the issue is still there.
Have you got any suggestions?
Thankyou

Actually it turns out I can't even add to it. It claims it's synced to another library (which apparently is true, being as it was last used with my Macbook Pro). Somewhat new question, How do I combine the two libraries, as it's all mine, just on two different computers, one of which doesn't work unless it's in Hard Disk Mode.

5d3 Working in LR4, But No Calibration Profiles?

Similar Messages

Maybe you are looking for