5G freezing randomly; diagnostic looked OK to me?

My trusty ol' 5G isn't so trusty these days. Over the last few weeks it has started freezing while in use. It started happening pretty much only if it was playing & I skipped to another song or made some other input; now it'll do it on its own in the middle of a song. It will not react to any input - only a reset gets it working again. Over the course of the day at work, this is happening around once an hour. (I leave it playing on shuffle the whole time, thru a stereo/dock) I tried diagnostic mode & everything looked OK to me; I have already done a full restore.
I'd just get a new one, but I've got other/higher priorities for my hard-earned cash right now. Any ideas or is this thing just finally reaching the end of the road? I can post exact diagnostic results if you want, for specific test(s).
Cheers.

...or should I just go buy a Zune?

Similar Messages

System freezes randomly in Mac OS X Leopard

I have a problem with my system which freezing randomly. When it freezes, I can still move the mouse pointer around, but I can’t move or open any object on the screen.
It doesn’t seem to be connected to a particular program since it might occur in various programs. I checked the hardware and also catalogue structures, authentication and so forth with disc warrior. Another odd thing is that I can’t seem to beable to boot from the installation DVD. I’ve looked in the various logs (for example the crash logs), but there doesn’t seem to be any notation of the freezes on any of the logs. Another thing is that I sometime have trouble starting the computer, pushing the on-button doesn’t result in anything. Is there anything else I might try before reinstalling the system?

Version:1.0StartHTML:0000000179EndHTML:0000016596StartFragment:0000002577EndFrag ment:0000016560SourceURL:file://localhost/Users/svantekarlsson/Desktop/LaunchDea mon.rtf
Unfortunately, my computer won’t boot from DVD either. I’ve triedlocating the files you mentioned. I cannot find the one in/private/var/run/StartupItems
Otherwise, they are as follows:
System/Library/StartupItems [empty]
Lib/LaunchDaemons
com.aladdin.aksusbd.plist
com.aladdin.hasplmd.plist
com.paceap.eden.licensed.plist
PACESupport.plist
System/Lib/LaunchDaemons
bootps.plist
com.apple.airport.wps
com.apple.airportd.plist
com.apple.airportPrefsUpdater.plist
com.apple.alf.agent.plist
com.apple.AppleFileServer.plist
com.apple.aslmanager.plist
com.apple.atrun.plist
com.apple.ATSServer.plist
com.apple.audio.coreaudiod.plist
com.apple.autofsd.plist
com.apple.automountd.plist
com.apple.backupd-attach.plist
com.apple.backupd-auto.plist
com.apple.backupd-wake.plist
com.apple.backupd.plist
com.apple.blued.plist
com.apple.bootlog.plist
com.apple.bsd.dirhelper.plist
com.apple.configd.plist
com.apple.configureLocalKDC.plist
com.apple.CoreRAID.plist
com.apple.coreservicesd.plist
com.apple.dashboard.advisory.fetch.plist
com.apple.DirectoryServices.plist
com.apple.DirectoryServicesLocal.plist
com.apple.diskarbitrationd.plist
com.apple.distnoted.plist
com.apple.dnsextd.plist
com.apple.docsetinstalld.plist
com.apple.DumpPanic.plist
com.apple.dyld.plist
com.apple.dynamic_pager.plist
com.apple.efax.plist
com.apple.familycontrols.plist
com.apple.FileSyncAgent.sshd.plist
com.apple.firmwaresyncd.plist
com.apple.fseventsd.plist
com.apple.gssd.plist
com.apple.hdiejectd.plist
com.apple.hidd.plist
com.apple.IFCStart.plist
com.apple.IIDCAssistant.plist
com.apple.installdb.system.plist
com.apple.InternetSharing.plist
com.apple.kdcmond.plist
com.apple.kdumpd.plist
com.apple.KerberosAutoConfig.plist
com.apple.KernelEventAgent.plist
com.apple.kextd.plist
com.apple.kuncd.plist
com.apple.lockd.plist
com.apple.loginwindow.plist
com.apple.mDNSResponder.plist
com.apple.mDNSResponderHelper.plist
com.apple.metadata.mds.plist
com.apple.netauth.sysagent.plist
com.apple.newsyslog.plist
com.apple.nfsd.plist
com.apple.nis.rpc.yppasswdd.plist
com.apple.nis.ypbind.plist
com.apple.nis.ypserv.plist
com.apple.notifyd.plist
com.apple.ocspd.plist
com.apple.ODSAgent.plist
com.apple.pcastagentd.plist
com.apple.PCIELaneConfigTool.plist
com.apple.periodic-daily.plist
com.apple.periodic-monthly.plist
com.apple.periodic-weekly.plist
com.apple.portmap.plist
com.apple.RemoteDesktop.PrivilegeProxy.plist
com.apple.ReportCrash.DirectoryService.plist
com.apple.ReportCrash.plist
com.apple.ReportCrash.SafetyNet.plist
com.apple.RFBEventHelper.plist
com.apple.RFBRegisterMDNS_RemoteManagement.plist
com.apple.RFBRegisterMDNS_ScreenSharing.plist
com.apple.scsid.plist
com.apple.seatbelt.compilerd.plist
com.apple.securityd.plist
com.apple.service_helper.plist
com.apple.smb.server.preferences.plist
com.apple.smbfs_load_kext.plist
com.apple.spindump.plist
com.apple.stackshot.plist
com.apple.statd.notify.plist
com.apple.syslogd.plist
com.apple.systemkeychain.plist
com.apple.SystemStarter.plist
com.apple.taskgated.plist
com.apple.update.plist
com.apple.usbmuxd.plist
com.apple.UserNotificationCenter.plist
com.apple.uucp.plist
com.apple.webfilter.plist
com.apple.WindowServer.plist
com.apple.xgridagentd.plist
com.apple.xgridcontrollerd.plist
com.vix.cron.plist
comsat.plist
eppc.plist
exec.plist
finger.plist
ftp.plist
login.plist
nmbd.plist
ntalk.plist
org.amavis.amavisd_cleanup.plist
org.amavis.amavisd.plist
org.apache.httpd.plist
org.cups.cups-lpd.plist
org.cups.cupsd.plist
org.isc.named.plist
org.net-snmp.snmpd.plist
org.ntp.ntpd.plist
org.postfix.master.plist
org.samba.winbindd.plist
org.x.privileged_startx.plist
shell.plist
smbd.plist
ssh.plist
telnet.plist
tftp.plist

HP Elite 7100 freezes randomly

Mostly brand new (about 3 months old) HP Elite 7100 mT (i5 750, 4GB RAM, ATI 5450) freezes randomly.
Tried reinstalling OS with clean Windows and fresh drivers of HP website and/or INTEL/AMD accordingly, still happens.
When it freezes, the windows log doesn't write anything, only that the subsequent boot was unplanned (meaning it's not kernel level, but hardware level).
I used diagnostic software to stress-test the computer but temperatures remain within normal parameters and stress-testing it does not make it freeze - it is apparently completely random (about once a day or two).
Anything I should try or do before I start the agonizing process of trying to explain the local HP support what's wrong so that they can take the computer to the lab and try to reproduce it to no avail?

T-G, EVGA is a good manufacturer. However, the card is 9" in length. This may present some space problems. As for temp problems, I suggest seeing if nVidia makes software to allow you to control the fan speed. My XFX card is ATI. ATI has software (Catalyst Control Center) to allow me to adjust the fan speed and overclock the card if I desire.
Signature:
HP TouchPad - 1.2 GHz; 1 GB memory; 32 GB storage; WebOS/CyanogenMod 11(Kit Kat)
HP 10 Plus; Android-Kit Kat; 1.0 GHz Allwinner A31 ARM Cortex A7 Quad Core Processor ; 2GB RAM Memory Long: 2 GB DDR3L SDRAM (1600MHz); 16GB disable eMMC 16GB v4.51
HP Omen; i7-4710QH; 8 GB memory; 256 GB San Disk SSD; Win 8.1
HP Photosmart 7520 AIO
++++++++++++++++++
**Click the Thumbs Up+ to say 'Thanks' and the 'Accept as Solution' if I have solved your problem.**
Intelligence is God given; Wisdom is the sum of our mistakes!
I am not an HP employee.

EMac freezes randomly, open window turns into broken up jibber

My eMac freezes randomly, open window turns into broken up jibber (kinda looks like I put a photoshop filter on it or something). I can't force quit when it does this, no error message, I've repaired permissions. Any ideas?

This doesn't help. but my first thought on seeing your picture was 'addressing bit failure in the video memory'. Unfortunately, as you already know, the video 'card' on the eMac is a chipset mounted to the logic board, and the only repair I'm aware of is replacement. An Apple Service Provider could give you an estimate but unless your eMac is still within the standard one-year hardware warrenty or you purchased the three-year ApplceCare extended warrenty, that's not an attractice cost-benefit tradeoff.
On the chance that I'm wrong and it's some unusual system corruption, look again for the Hardware Test disc. It can be tricky figuring out where it is; on early eMacs it was always a separate CD, on recent eMacs it's a partition on the Restore DVD, and on models in between, it depends on whether the OS X Install disc was on a DVD or not. You might try booting from your OS X Install or Restore disc using Startup Manager to see if Hardware Test is on a partition.
If nothing else, booting off the OS X Install disk (as if you were going to run Disk Utility > Repair Disk to check the drive) should further confirm if the problem is in the video hardware rather than in the hard drive's OS: if the broken display appears when booted from the OS X Install disc, it's pretty certainly the video hardware.

Imac 10.9.3 freezes randomly

imac freezes randomly. no spinning wheel - just no keyboard or mouse response. usually running safari and mail only when it occurs. forces hard reboot

These instructions must be carried out as an administrator. If you have only one user account, you are the administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Step 1
For this step, the title of the Console window should be All Messages. If it isn't, select
SYSTEM LOG QUERIES ▹ All Messages
from the log list on the left. If you don't see that list, select
View ▹ Show Log List
from the menu bar at the top of the screen.
In the top right corner of the Console window, there's a search box labeled Filter. Initially the words "String Matching" are shown in that box. Enter "BOOT_TIME" (without the quotes.)
Each message in the log begins with the date and time when it was entered. Note the timestamps of the BOOT_TIME log messages, which refer to the times when the system was started. Now clear the search box and scroll back in the log to the last boot time when you had the problem. Select the messages logged before the boot, during the time something abnormal was happening. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
For example, if the system was unresponsive or was failing to shut down for three minutes before you forced a restart, post the messages timestamped within three minutes before the boot time, not after. Please include the BOOT_TIME message at the end of the log extract—not at the beginning.
If there are long runs of repeated messages, please post only one example of each. Don’t post many repetitions of the same message.
☞ When posting a log extract, be selective. A few dozen lines are almost always more than enough.
☞ Some private information, such as your name, may appear in the log. Anonymize before posting.
Please don't indiscriminately dump thousands of lines from the log into this discussion.
Please don't post screenshots of log messages—post the text.
Step 2
In the Console window, select
DIAGNOSTIC AND USAGE INFORMATION ▹ System Diagnostic Reports
(not Diagnostic and Usage Messages) from the log list on the left. If you don't see that list, select
View ▹ Show Log List
from the menu bar.
There is a disclosure triangle to the left of the list item. If the triangle is pointing to the right, click it so that it points down. You'll see a list of reports. A crash report has a name that begins with the name of the crashed process and ends in ".crash". A panic report has a name that begins with "Kernel" and ends in ".panic". Select the most recent of each. The contents of the report will appear on the right. Use copy and paste to post the entire contents—the text, not a screenshot.
I know the report is long, maybe several hundred lines. Please post all of it anyway.
☞ If you don't see any reports listed, but you know there was a crash or panic, you may have chosen Diagnostic and Usage Messages from the log list. Choose DIAGNOSTIC AND USAGE INFORMATION instead.
In the interest of privacy, I suggest that, before posting, you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if it’s present (it may not be.)
☞ Please don’t post other kinds of diagnostic report—they're very long and rarely helpful.

My H320 4041-1JU Desktop PC freeze randomly.

I bought a H320 about two and half years ago. A few months leater, the computer start to freezer randomly. It happens a few time a day and I am very frustrated. Anyone else has the same issue?
Lenovo H320 4041-1JU Desktop PC - Intel Core i3-550 3.20GHz, 4GB DDR3, 1TB HDD, DVDRW, Windows 7 Home Premium 64-bit (T71-1106 )

hi mzwang,
Welcome to the Forums.
Can you try to boot in Safe Mode and observe if you still get the freezing issues.
- if the system's fine, it's possible that an app/service that's running on the background is causing the issue. Try to perform a clean boot and observe the unit in normal mode.
- if the system still freezes in safe mode, consider running a diagnostics on the HDD/RAM. Try Ultimatebootcd as it contains diagnostic utilities that you can run in DOS. You can also create a bootable USB on another PC and run it on the Ideacentre H320.
For the HDD diagnostics, you can use:
Seatools for DOS - if you have a seagate HDD
Datalifeguard Diagnostics - if you have a western digital HDD
Vivard - universal HDD diagnostics for DOS
For the Memory diagnostics, you can use Memtextx86+.
Let me know how it goes.
Regards
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

1 month Toshiba satellite A505 s6033 freezing randomly and blank screen on startup

Hi,
My Toshiba satellite A505 s6033 start freezing last night when I was surfing the internet. After pressing 5 seconds or more the power button the computer turned off. After that I start it back on but all the lights on body worked except the display.
After few more attempts I pushed arrow down and the power button the display turned on, but the freezing problem is back. So I thought that is a windows problem and I used the recovery partition to restore the state out of the box state. But the display is randomly blank when I push the start button except the other lights, and after restoring the laptop still freezing randomly in or during the windows is loading.
When I turn it on in safe mode, it works perfectly fine. When I turn it on normally, it freezes almost right away.
I bought this computer from bestbuy, but I am an Romanian citizen (sorry for my English), my question is : I can use the International Limited Warranty in my country ? Or what should I do to fix my laptop.
Kind regard,
Valentin

First, sorry because of my English, it is not my language and it's been a while since I had to used it.
This is happening to me, when I bought the laptop I had a few times that it froze but I thought it was something I did, and it happened once or twice in 3 months, for 9 months, maybe 4 times in the last month, it began to increase.
Then I thought it could be the temperature, and after a while, 2 months, I didn't had time, I bought a external cooler, but it didn't work... By this time my warranty expired... And thinking it could be dirt, I opened the back, but just by removing it I saw it was clean and put it back, I did nothing but opening... And again started looking for what it could be... Yes, I tried looking here, but I didn't find this topic that time, and now that I don't have the warranty I found it...
Any one here could help me? What should I do? Is there any way to fix it without buying a new video card?
I live in Brazil so its difficult for me to buy parts, I bought the laptop in the states when there, here the hardware are expensive... But if I have, I'll buy... If I have to buy a new one, could you tell me if there is a new one that I can buy that has little difference in price for the one I have and it's better?
PS: Toshiba from Brazil didn't helped me, I just spoke with then...
I thank you for any help!!

I've been using Firefox for quite a long time now and recently it has started giving some problems. It freezes randomly and doesn't respond to any clicks.

I am a proud user of Firefox. I started experiencing the freezing problem since i updated to Firefox 18 and now I am facing the same problem with Firefox 19. Firefox does not respond to any of my clicks and then I have to close it using Task Manager. This is happening frequently and randomly. It does not freeze on a particular site or anything else. It just freezes randomly. Please do reply if anyone has a solution to this problem.

see this:
[[Reset Firefox preferences to troubleshoot and fix problems|Reset Firefox preferences to troubleshoot and fix problems]]

Fresh Install of Windows 8.1 on HP Pavilion a4313w freezes randomly

I've done four fresh installs of Windows 8.1 on the HP Pavilion a4313 Desktop PC in our home and it always freezes randomly. Even in safe mode, it freezes. I've done hardware tests with BurnIn Test 8.0 and everything including the hardware memory is fine. Antivirus is installed and it's completely updated with Windows Updates. Once I installed the 32-bit version of Windows 8.1 and it still froze. I performed a fresh install, because it would hang sometimes with Windows 7.
Anyways, I am more then ready and willing to post more information or test results upon request. Anyone have suggestions?

Hello @buddhapunk36,
I understand that your computer running Windows 8.1 keeps freezing and you have run the hardware tests and it comes back okay. I would suggest that you try installing the original Windows 7 that came with your computer and see if the freezing continues. If it does continue the the issue appears to be a physical issue. Please call our technical support at 800-474-6836. If you live outside the US/Canada Region, please click the link below to get the support number for your region. http://www8.hp.com/us/en/contact-hp/ww-phone-assist.html.
If the issue does not continue then your system may not be compatible with Windows 8.1.
I would like to thank you for posting on the HP Forums. Have a great day!
Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
Dunidar
I work on behalf of HP
Find out a bit more about me by checking out my profile!
"Customers don’t expect you to be perfect. They do expect you to fix things when they go wrong." ~ Donald Porter

Macbook Pro (mid 2007) freezes randomly

Hi all,
Last week my Macbook pro (2007) started to freeze randomly. 2-3 years ago I added an SSD (64 gb crucial M4) and replaced the dvd drive for an 500 gb HDD. The configuration worked perfectly until last week. My macbook sometimes works for a couple hours and sometimes it freezes just after 30 minutes from startup. Sometimes during an freeze I can use the programs that were open. For example when reading an PDF I can scroll 1-2 pages down/up. When I scroll more than 1-2 pages Preview freezes as well.
I have done the following things to exclude some frequent problems.
Set my fan speed to 6000 rpm to exclude an heat problem. The system freezes also with 'normal' temperatures.
Checked my SDD & HDD on file consistency and repaired the disks with disk utility (booted from Mac Os X install cd). Disk utility reports that the disks are okay. I also checked with Techtool pro on bad blocks and smart status. All seems to be all right.
Checked my RAM with tech tool
Reset NVRAM
Checked console for error messages. There are no messages at all between a couple of minutes before a freeze and a forced turn off/on.
I haven't installed new software recently.
Last time when my macbook froze, I had an terminal window open. In this window I could execute some commands, only the most basic. Top, sudo, shutdown etc. didn't work. I could navigate to all folders on both SDD & HDD. But I couldn't see any files, only folders. That is strange right?
I think the next step is to change the hard drives for an other (new) one, to exclude hard drive problems. But before I open my Macbook I was wondering if anyone has other ideas to solve this problem.
Thanks for any help.
Bauke

Back up all data immediately as your boot drive may be failing.
If you have more than one user account, these instructions must be carried out as an administrator.
Triple-click anywhere in the line below on this page to select it:
syslog -k Sender kernel -k Message CSeq "I/O error" | tail | open -f -a TextEdit
Copy the selected text to the Clipboard (command-C).
Launch the Terminal application. Paste into the Terminal window (command-V).
The command may take a noticeable amount of time to run. Wait for a new line ending in a dollar sign (“$”) to appear.
A TextEdit window will open with the output of the command. Normally the window will be empty. If you get output like this:
kernel[0] <Debug>: disk0s2: I/O error
the boot drive is failing, or there's some other hardware fault in the storage subsystem.

X freezes randomly, screen turning black or flickering

Hey everyone,
I'm having this annoying issue where X freezes randomly, I can't tell exactly when it happens. But when it happens, the following occurs:
- Screen is frozen, sometimes turns black, sometimes turns black and reappears, but still frozen.
- Cursor and sound (e.g. music) still works
- When switching to a new tty (CTRL-ALT-F6), I can log in and restart gdm using
sudo systemctl restart gdm
- When I'm in the other tty and trying to switch back to the graphical view, I get stuck completely, not even switching consoles works now.Reset is the only option from there
- Blindly restarting gnome-shell doesn't work
I somehow have the feeling, it happens more often when I physically move my laptop, but thats just a gut feeling. It also happens often when my screen is locked and I try to log back in.
I found this bug report, but its quite old and that doesn't help me: https://bugs.archlinux.org/task/14594
Any help would be very appreciated, its really annoying to lose my work so often.
My specs:
$ lspci | grep VGA
01:00.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] Chelsea XT GL [FirePro M4000]
Gallium 0.4 on AMD CAPE VERDE
Last edited by freijon (2014-04-12 10:33:22)

I can't tell whether they're relevant, but there are some errors:
journalctl -n 100 wrote:$ journalctl -n 100 | grep ERROR
Apr 14 22:51:11 arch kernel: [drm:si_dpm_set_power_state] *ERROR* si_set_sw_state failed
Apr 14 22:51:22 arch kernel: [drm:r600_ib_test] *ERROR* radeon: fence wait failed (-35).
Apr 14 22:51:22 arch kernel: [drm:radeon_ib_ring_tests] *ERROR* radeon: failed testing IB on GFX ring (-35).
Apr 14 22:51:24 arch kernel: [drm:si_dpm_set_power_state] *ERROR* si_set_sw_state failed
Apr 14 22:51:25 arch kernel: [drm:r600_ib_test] *ERROR* radeon: fence wait failed (-35).
Apr 14 22:51:25 arch kernel: [drm:radeon_ib_ring_tests] *ERROR* radeon: failed testing IB on GFX ring (-35).
Apr 14 22:51:25 arch kernel: [drm:radeon_pm_resume_dpm] *ERROR* radeon: dpm resume failed
I uploaded the full logs here: https://www.dropbox.com/s/0x3xed11zr13x … ogs.tar.gz in case anyone would like to check it out.

Re: Tecra S10 and S11 freeze randomly

We have several Tecra S10's and S11's. They freeze randomly during the day. Some even twice within half an hour, others spread it out through the day.
The Tecra's are all Windows 7. Some have 64 bit, others a 32 bit installation. After the Windows 7 installation we removed additional software we don't need, like McAfee, Toshiba goodies (Assist, Tempro, etc), Ebay, etc. After that we activatie Office 2007 and we Microsoft-update the the laptops. So far so good.
However, after a week or two just simply working in Word causes the Tecra to freeze. Even ctrl+alt+del is not working. The Tecra has to be forced to shut off by holding the power button down.
Does anybody recognize these 'frozen moments'. It's very anoying.

> All notebooks are in an Active Directory domain Windows 2008.
Thats the reason why I asked if notebooks are connected to some company LAN.
I saw somewhere on this forum that similar issues were noticed in the same situation. Notebook was somehow blocked when was part of domain.
Probably some data exchange between notebook and server was responsible for this blocking and freezing issue.
I really don't know what to say. If you have several notebooks with the same problem I recommend you to contact nearest authorized Toshiba service provider and ask for help. You know they have contact with Toshiba people and if there is something serious they can help you with this.
I really don't believe some long discussion here will help you much.
If your local administrator cannot find out what the problem can be than you need professional help.
Do you agree with me?

After recent updates, Gnome freezes randomly. Video problem?

I've been having some problems lately that I didn't have before recent updates.
My desktop will freeze randomly and my only option is to switch to a VT and enter multi-user mode with `systemctl isolate multi-user.service`. X doesn't crash though. My Gnome Desktop just freezes entirely, but the mouse pointer continues to move around just fine. When I enter multi-user mode, Xorg.0.log says that the server exited successfully.
Below are error messages in dmesg, systemd journal, and Xorg.0.log.
# dmesg | grep -i error
[17986.766825] [drm:r100_cs_track_texture_check] *ERROR* Texture of unit 0 needs 245760 bytes but is 139264
[17986.766827] [drm:r100_cs_track_texture_print] *ERROR* pitch 1280
[17986.766829] [drm:r100_cs_track_texture_print] *ERROR* use_pitch 1
[17986.766831] [drm:r100_cs_track_texture_print] *ERROR* width 65
[17986.766833] [drm:r100_cs_track_texture_print] *ERROR* width_11 2048
[17986.766834] [drm:r100_cs_track_texture_print] *ERROR* height 48
[17986.766836] [drm:r100_cs_track_texture_print] *ERROR* height_11 2048
[17986.766838] [drm:r100_cs_track_texture_print] *ERROR* num levels 0
[17986.766840] [drm:r100_cs_track_texture_print] *ERROR* depth 0
[17986.766842] [drm:r100_cs_track_texture_print] *ERROR* bpp 4
[17986.766844] [drm:r100_cs_track_texture_print] *ERROR* coordinate type 0
[17986.766845] [drm:r100_cs_track_texture_print] *ERROR* width round to power of 2 0
[17986.766847] [drm:r100_cs_track_texture_print] *ERROR* height round to power of 2 0
[17986.766849] [drm:r100_cs_track_texture_print] *ERROR* compress format 0
[17986.766851] [drm:radeon_cs_ib_chunk] *ERROR* Invalid command stream !
[22547.870582] plugin-containe[20829]: segfault at 7fcf04225a05 ip 00007fcf1487c9d8 sp 00007fcf0c3a1970 error 4
# journalctl | grep -i error
Nov 07 23:22:43 starlancer kernel: [drm:r100_cs_track_texture_print] *ERROR* bpp 4
Nov 07 23:22:43 starlancer kernel: [drm:r100_cs_track_texture_print] *ERROR* coordinate type 0
Nov 07 23:22:43 starlancer kernel: [drm:r100_cs_track_texture_print] *ERROR* width round to power of 2 0
Nov 07 23:22:43 starlancer kernel: [drm:r100_cs_track_texture_print] *ERROR* height round to power of 2 0
Nov 07 23:22:43 starlancer kernel: [drm:r100_cs_track_texture_print] *ERROR* compress format 0
Nov 07 23:22:43 starlancer kernel: [drm:radeon_cs_ib_chunk] *ERROR* Invalid command stream !
Nov 07 23:41:07 starlancer dbus-daemon[275]: dbus[275]: [system] Rejected send message, 2 matched rules; type="method_return", sender=":1.1" (uid=0 pid=273 comm="/usr/lib/systemd/systemd-logind ") interface="(unset)" member="(unset)" error name="(unset)" requested_reply="0" destination=":1.418" (uid=1002 pid=19143 comm="/usr/bin/gnome-session --session=gnome-compiz ")
Nov 07 23:41:07 starlancer dbus[275]: [system] Rejected send message, 2 matched rules; type="method_return", sender=":1.1" (uid=0 pid=273 comm="/usr/lib/systemd/systemd-logind ") interface="(unset)" member="(unset)" error name="(unset)" requested_reply="0" destination=":1.418" (uid=1002 pid=19143 comm="/usr/bin/gnome-session --session=gnome-compiz ")
Nov 07 23:42:07 starlancer dbus-daemon[275]: dbus[275]: [system] Rejected send message, 2 matched rules; type="method_return", sender=":1.1" (uid=0 pid=273 comm="/usr/lib/systemd/systemd-logind ") interface="(unset)" member="(unset)" error name="(unset)" requested_reply="0" destination=":1.418" (uid=1002 pid=19143 comm="/usr/bin/gnome-session --session=gnome-compiz ")
Nov 07 23:42:07 starlancer dbus[275]: [system] Rejected send message, 2 matched rules; type="method_return", sender=":1.1" (uid=0 pid=273 comm="/usr/lib/systemd/systemd-logind ") interface="(unset)" member="(unset)" error name="(unset)" requested_reply="0" destination=":1.418" (uid=1002 pid=19143 comm="/usr/bin/gnome-session --session=gnome-compiz ")
Nov 07 23:42:16 starlancer gnome-session[19143]: Gdk-WARNING: gnome-session: Fatal IO error 11 (Resource temporarily unavailable) on X server :0.
Nov 07 23:42:20 starlancer dbus-daemon[275]: dbus[275]: [system] Rejected send message, 1 matched rules; type="method_call", sender=":1.438" (uid=0 pid=19658 comm="/usr/sbin/gdm-binary ") interface="org.freedesktop.DBus.Properties" member="GetAll" error name="(unset)" requested_reply="0" destination=":1.439" (uid=0 pid=19664 comm="/usr/lib/gdm/gdm-simple-slave --display-id /org/gn")
Nov 07 23:42:20 starlancer dbus[275]: [system] Rejected send message, 1 matched rules; type="method_call", sender=":1.438" (uid=0 pid=19658 comm="/usr/sbin/gdm-binary ") interface="org.freedesktop.DBus.Properties" member="GetAll" error name="(unset)" requested_reply="0" destination=":1.439" (uid=0 pid=19664 comm="/usr/lib/gdm/gdm-simple-slave --display-id /org/gn")
Nov 07 23:42:20 starlancer NetworkManager[269]: <error> [1352360540.622789] [nm-system.c:924] add_ip4_route_to_gateway(): (wlan0): failed to add IPv4 route to gateway (-12)
Nov 08 00:19:41 starlancer dbus-daemon[275]: dbus[275]: [system] Rejected send message, 2 matched rules; type="method_return", sender=":1.1" (uid=0 pid=273 comm="/usr/lib/systemd/systemd-logind ") interface="(unset)" member="(unset)" error name="(unset)" requested_reply="0" destination=":1.487" (uid=1002 pid=19809 comm="/usr/bin/gnome-session --session=gnome-compiz ")
Nov 08 00:19:41 starlancer dbus[275]: [system] Rejected send message, 2 matched rules; type="method_return", sender=":1.1" (uid=0 pid=273 comm="/usr/lib/systemd/systemd-logind ") interface="(unset)" member="(unset)" error name="(unset)" requested_reply="0" destination=":1.487" (uid=1002 pid=19809 comm="/usr/bin/gnome-session --session=gnome-compiz ")
Nov 08 00:20:33 starlancer gnome-session[19809]: Gdk-WARNING: gnome-session: Fatal IO error 11 (Resource temporarily unavailable) on X server :0.
Nov 08 00:20:36 starlancer dbus-daemon[275]: dbus[275]: [system] Rejected send message, 1 matched rules; type="method_call", sender=":1.507" (uid=0 pid=20280 comm="/usr/sbin/gdm-binary ") interface="org.freedesktop.DBus.Properties" member="GetAll" error name="(unset)" requested_reply="0" destination=":1.508" (uid=0 pid=20286 comm="/usr/lib/gdm/gdm-simple-slave --display-id /org/gn")
Nov 08 00:20:36 starlancer dbus[275]: [system] Rejected send message, 1 matched rules; type="method_call", sender=":1.507" (uid=0 pid=20280 comm="/usr/sbin/gdm-binary ") interface="org.freedesktop.DBus.Properties" member="GetAll" error name="(unset)" requested_reply="0" destination=":1.508" (uid=0 pid=20286 comm="/usr/lib/gdm/gdm-simple-slave --display-id /org/gn")
Nov 08 00:20:37 starlancer NetworkManager[269]: <error> [1352362837.36005] [nm-system.c:924] add_ip4_route_to_gateway(): (wlan0): failed to add IPv4 route to gateway (-12)
# cat /var/log/Xorg.0.log | grep -i -e "(EE)" -e "(WW)"
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 22555.361] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 22555.361] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 22555.361] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 22555.364] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 22555.366] (WW) Warning, couldn't open module vesa
[ 22555.366] (EE) Failed to load module "vesa" (module does not exist, 0)
[ 22555.367] (WW) Warning, couldn't open module modesetting
[ 22555.367] (EE) Failed to load module "modesetting" (module does not exist, 0)
[ 22555.367] (WW) Warning, couldn't open module fbdev
[ 22555.367] (EE) Failed to load module "fbdev" (module does not exist, 0)
EDIT: My desktop is started by systemd using graphical.target and gdm.service to start the GDM display manager on terminal 1 (TTY1). My Gnome desktop runs in Classic (Fallback) mode with Compiz and compiz-decorator-gtk for effect. I
Any idea what might be causing these freezes or what info I can further provide?
EDIT: Processes in X are apparently not crashing, only the video output is. For example, if I'm running applications with sound, I continue hearing sound though the graphics are completely frozen. Is there a way to refresh the graphics or video card somehow?
Last edited by amadar (2012-12-20 10:59:32)

bmanuel wrote:
I think i got my problem, but i don't know how to solve it: after much troubles i found out that whenever i have an SMB connection with a machine that then goes down/disconnect from network without me unmounting the share BEFORE it, then BOOM, everything freeze.
I noticed this only because i was sharing a directory with my brother and noticed i had the froze as soon as he got disconnected from the network: so i asked him to power on that machine and.. magic! My machine unfroze instantly!
But now, how to fix that?! Is it due to my /etc/fstab? Does this really matter with nemo/nautilus mounted shares? This, however, depicts the machine in question (the one that, disconnecting from the network, caused my own to freeze)
//themachine.local/shared /home/username/mountpoint/ cifs noauto,guest,username=myname,password=mypassword,uid=1000,gid=100 0 0
At last I found out what's my problem, hopefully your situation is similar so that we can work out a solution on this one.
THANKS! I'm quite sure this is the reason gnome shell freezes for me as well. I was mounting my box.com cloud with this entry in /etc/fstab:
# box.com account
https://www.box.com/dav /home/abtz/Box davfs rw,user,noauto 0 0
If anyone has an idea for how to fix this, I'm all ears. For now, I'll just remove the entry from /etc/fstab.
I'm running vanilla Gnome, with only the Frippery shutdown menu and battery remaining extensions installed.

TS1717 iTunes 10.7 freezes randomly in my Macbook Air, cannot do anything. Any Help?

iTunes 10.7 freezes randomly in my Macbook Air, cannot do anything. Any Help?

iTunes 10.7 freezes randomly in my Macbook Air, cannot do anything. Any Help?

Ords freezes randomly

Red Hat 6.5
Tomcat 6.0.24-64
ORDS 2.0.7.91.15.01
APEX DB 4.2.4.00.08
Configure apex and works fine but ORDS freezes randomly, try to get "wget -d -O /tmp/pedro.lis http://localhost:8080/ords/apex_admin" from server but freeze about 3 minutes and works fine. At catalina.2014-05-12.log get some errors about "Broken pipe"
May 12, 2014 5:07:19 PM oracle.dbtools.apex.ModApexContext write
SEVERE: null
ClientAbortException: java.net.SocketException: Broken pipe
        at org.apache.catalina.connector.OutputBuffer.realWriteBytes(OutputBuffer.java:358)
        at org.apache.tomcat.util.buf.ByteChunk.append(ByteChunk.java:354)
        at org.apache.catalina.connector.OutputBuffer.writeBytes(OutputBuffer.java:381)
        at org.apache.catalina.connector.OutputBuffer.write(OutputBuffer.java:370)
        at org.apache.catalina.connector.CoyoteOutputStream.write(CoyoteOutputStream.java:89)
        at org.apache.catalina.connector.CoyoteOutputStream.write(CoyoteOutputStream.java:83)
        at oracle.dbtools.rt.web.WebErrorResponse$DeferErrorOuput.write(WebErrorResponse.java:255)
        at oracle.dbtools.apex.ModApexContext.write(ModApexContext.java:240)
        at oracle.dbtools.apex.ModApexContext.write(ModApexContext.java:210)
        at oracle.dbtools.apex.ModApex.handleRequest(ModApex.java:231)
        at oracle.dbtools.apex.ModApex.doPost(ModApex.java:151)
        at oracle.dbtools.apex.ModApex.service(ModApex.java:302)
        at oracle.dbtools.rt.web.HttpEndpointBase.modApex(HttpEndpointBase.java:350)
        at oracle.dbtools.rt.web.HttpEndpointBase.service(HttpEndpointBase.java:132)
        at javax.servlet.http.HttpServlet.service(HttpServlet.java:717)
        at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:290)
        at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:206)
        at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:233)
        at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:191)
        at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:127)
        at org
Any ideas ?
Regards
PGutierrez

Sorry for the late reply.
I decided to check if overheating could be the problem so i monitored the temperature for a few days and they seemed to be under control when the freeze/lockup occurs. Sometimes i get lockups even on a cold start.
Recently i came across this https://bugs.launchpad.net/ubuntu/+sour … bug/568611 . I hadnt noticed any problems with brightness control but i decided to check anyway. It works most of the time, but if i try to increase or decrease it a few times (using the functions keys or using the gnome applet), the system locks up. I can reproduce this consistently. Also this seems to be consistent with freeze in GDM because the lockup almost coincides with the point when the gnome power manager tries to restore the brightness levels.
There is also a fix https://launchpad.net/~kamalmostafa/+ar … gbacklight for this. Is there way to patch this onto my kernel?

5G freezing randomly; diagnostic looked OK to me?

Similar Messages

Maybe you are looking for