5g iPod 30gb no longer working

Hello everyone,
I have been using my iPod since I bought it in November last year, it was working fine until a few days ago...
the iPod was midway through a song when it paused itself and I was unable to start the track playing again or turn the unit off.
I reset the iPod as per Apple website instruction and the unit powered down. However I can now longer turn it back on. I have tried resetting it several times to no avail.
Also, if I connect the unil to my power adapter or the USB cable connected to my computer nothing happens. The unit's screen doesn't come on with the charging icon, so as far as I am aware it isn't charging either.
By the way, when the unit paused and ceased to work the battery was fully charged - I was only ten minutes into using it after a full charge.
Any help or advice would be gratefully appreciated.
Thanks
30GB 5g iPod   Windows XP  

Welcome to Apple Discussions!
See this...
Your iPod Does Not Turn On
btabz

Similar Messages

  • Thanks for responding.  Since I upgraded ITUNES to IOS 6, my IPOD Touch no longer works at all.  I had numerous apps, music and videos on this touch.  It made me restore to factory reset and it still does not work!!! Nothing I do will work on this touch n

    Thanks for responding. Since I upgraded ITUNES to IOS 6, my IPOD Touch no longer works at all. I had numerous apps, music and videos on this touch. It made me restore to factory reset and it still does not work!!! Nothing I do will work on this touch now. I have so much data on this, I don't want to loose or have to restore!
    Can you help me?
    Thanks

    If you restored to factory settings/new iPod and still have the problem that indicates a hardware problem.
    Make an appointment at the Genius Bar of an Apple store..
    Apple Retail Store - Genius Bar

  • My secondary e-mail address used on my daughter's ipod can no longer work.  It states, that it is already in use with another apple id.  She used it for weeks before this happened.

    My secondary e-mail address used on my daughter's ipod can no longer work.  She uses this as her imessage texting.  First it needed to be verified.  Once I tried to verify it on appleid support, It states, that it is already in use with another apple id.  She used it for weeks before this happened.

    Maybe:
    iOS: Troubleshooting FaceTime
    iOS: Troubleshooting FaceTime and iMessage activation

  • My ipod app no longer works. Everytime I go to open the ipod app it stays open for a second and then shuts down. I am not able to get anything to play either through the standard ipod controls or the multitasking control panel. I'm sure there will be an u

    my ipod app no longer works. Everytime I go to open the ipod app it stays open for a second and then shuts down. I am not able to get anything to play either through the standard ipod controls or the multitasking control panel. I'm sure there will be an update soon to correct this, i just wanted to see if anyone else was having the same problem.
    wen i open ipod in my iphone ,, it gets stuck ,, and get backs to the menu ,,, and doesnot play anything ,, not video nor song

    If your phone is not officially unlocked by the carrier in the UK, you can not use the phone using another SIM, unless you modify the software or the SIM, which can lead to unexpected results, such as non functioning apps.
    Unauthorized modification of iPhone OS has been a major source of instability, disruption of services, and other issues
    Problems resulting from those modifications can't be discussed in these forums, due to the Terms of Use

  • The 'Shuffle' function on my iPod Classic not longer works on my iPod or in my vehicle.  It worked prior to syncing in iTunes using my Macbook.  Now I can only play music sequentially.  Can anyone assist?

    The 'Shuffle' function on my iPod Classic no longer works on my iPod or in my vehicle (2012 Acura TL).  It worked prior to syncing in iTunes using my MacbookPr .Now I can only play music sequentially.  Can anyone assist?

    Reset or restore the device.
    tt2

  • Wheel of iPod Shuffle no longer works

    The wheel on my iPod shuffle no longer works (forward and reverse music, volume, etc). Music plays, but otherwise have no control. Reset device, but problem persists. Anyone have a suggestions?

    Hello khcumiskey,
    Thanks for using Apple Support Communities.
    Since you reset the iPod and the issue persists, the next step would be to seek service for your iPod shuffle.
    Apple - Support - Service Answer Center
    Take care,
    Alex H.

  • IPod Apps no longer work, Music disappears, Fix?

    QUESTION : How to fix permanently the “iPod Touch Breakdown“?
    (seems identical to the iPhone “Breakdown“)
    Since I upgraded to 2.0.2, running iTunes 7.7.1 (11) on a MacBook Pro G4, I keep having big trouble with Apps, Music and Films.
    Here is what I call the “iPod Touch Breakdown“:
    - Apps won’t start : the iPod would go back to the home screen after a few seconds.
    - Music and Films disappear (My music consists essentially of personnal CDs).
    - (for me Photos are still there)
    - all original Apple Apps work OK
    This is a known problem, also occuring on the iPhone with many posts on the iPhone discussions forum (see “iPhone“/“Installing and Using iPhone Applications“/“iPhone Applications no longer work“. At the time I write this messge, this question has been viewed 16,080 times ( ) (*) and there have been 319 replies: probably a sad record for a single question, which means that THERE REALLY IS A BASIC PROBLEM.
    My iPod is a 8Gb purchased while staying in Pasadena, almost a year ago. I was extremely happy to use it more and more like a PDA (updates 2.0.1 and 2.0.2).
    There have been some fixes proposed on the discussions forum (iPhone) that I tried and I have tried myself a couple more. NONE of them could fix the problem permanently: all fixes have been working for a day or two, no more. Untill you download an App (even an update) and you get the “Breakdown“ again.
    As other users, I have noted a slowdown in anything I am doing (e.g. typing text) just before the Apps stop working and the music disappears. (see for instance Truth42 on iPhone Forum (Applications no longer work), Posted: Aug 25, 2008 10:57 AM)
    Fixes: typically you get to disinstall and then reinstall all your Apps. Each time, you lose all your Apps parameters (bad for data bases and notes).
    Two ways:
    see iPhone forum: Aveonz Posted: Aug 24, 2008 3:16 AM :
    1- sync using iTunes
    2- in iTunes/Store: deauthorize your account
    3- sync
    4- authorize
    5- sync (will re-load your Apps)
    6- sync (to backup you new configuation)
    (the whole process may take several hours; I have also done a reboot between 3 and 4)
    (ii) proposed by various people :
    1- deselect all applications
    2- sync
    3- disconnect your iPod and reboot it (pressing both buttons simultaneously for several seconds – see Apple site) (you keep you parameters, WiFi, etc)
    4- select the Apps you want back
    5- sync (will re-load your Apps)
    6- sync (to backup you new configuation)
    In the end you can use the Apps you have reloaded, but just for a few days (or hours)… until you cannot resist downloading a new App, or simply just download an App update. It won’t breakdown instantly after you do that, but it will very soon.
    I certainly would take any procedure to fix this definitely. However, the best choice is probably to use as few third party Apps as possible (none is better) and wait for 2.1. Hopefully Apple is working on this, and we’ll get a definite fix very soon. This actually makes a very bad press for the iPod Touch and iPhone.
    Sadly,
    because I think iPod Touch and iPhone are beautiful machines –but for how long? Competition is tough…
    Cheers
    (*) about this number 16,080, obviously not all of the viewers experienced the “Breakdown“, but most were just curious to know. Still, the good question is to know how many of us, using the iPhone and iPod Touch experience this bug (virus?) and why some have it and not others (and in which proportion?).

    Same issue here since updating to 2.0.2; Is there a way to back I wonder?
    So I plugged back in my iPod touch and,...
    0. make a note of all your music, movies, photos, apps selections to restore
    1. cancel connect attempt to iTunes store (little 'x' in iTunes toolbar)
    2. cancel attempts to sync or backup (little 'x' in iTunes toolbar)
    3. clicked <OPTION>[Restore] once selecting my iPod touch device
    4. navigate to <home>/Library/iTunes/iPod Software Udpates/
    5. pick the prior update: iPod1,12.0.1_5B108Restore
    6. then waited through iPod window status displays
    'Preparing iPod software for restore...'
    'Restoring iPod software...'
    'Verifying iPod Software...'
    7. OK the 'Your iPod has been restored to factory settings,...'
    8. Ssync process did NOT automatically being so I unplugged & plugged it
    (I did verify that 2.0.1 was loaded seeing the App Store)
    9. Pick 'Set up as a new iPod'; don't pick an earlier backup point
    (mostly 'cause I couldn't be sure which was a good failsafe).
    10. iTunes then begin setup of my [ahem] new iPod.
    STOP IT; it'll try and do restore everything. Then navigate the tabs for
    your iPod and re-select those things you want (music,photos,movies,apps,etc)
    So like any computer you need to keep proper backups.
    The apple s/w system updater appears to do just that automatically, thanks! Of course it would've been nice to have had the 2.0.2 version tested a bit more before its release.
    IMHO the host (mac) should have kept my prefs for the iPod rather than my resorting to handwritten notes but at least I'm back to normal. Consider when replacing an iPod how you'd want the replacement to be a mirror of its predecessor.
    Oh, skip future requests to update to 2.0.2 until Apple can get his sorted out.
    HTH
    /los "I was a teenage net-random"

  • Ipod out no longer works with iOS 6.1

    As the title suggests, after updating my iPhone 5 to iOS 6.1 the iPod out function no longer works with connected devices. With the previous version, I could hook up my Kenwood car stereo using the lightning to 30 pin adapter and the stereo would "Read" my iPhone and begin playing the first track of my music collection. I also had song, artist and playlist search support.
    Now, all I get is a constant "Reading" indicator and can't get past this point.
    Is anyone else having any experiences similar to this and does anyone have any suggestions to fix it?
    Thanks

    Try this.
    Go to Settings>General>Date and Time>Set Automatically>Off.
    Set the date one year ahead. Try to get email.
    If you get an error message, go back to the settings. Correct the date and time (set automatically) then go back and try to get email again.

  • IPod Touch no longer works with car stereo after 4.0 update

    I updated my iPod to 4.0 a couple of days ago, and my Hyundai Santa Fe's built-in iPod interface no longer recognizes my iPod's music - it just says "empty iPod" or something of that nature. Is anyone else having this problem?? What should I do?

    Add me to the list. Brand blankety-new ipod touch that after 4.0.2 wouldn't work with the Subaru-factory-installed ipod connector in my '08 STI. The shut-it-off-and-restart-in-the-car method at least made it able to play music again but still no recharging.
    To add insult to injury I did the have-an-Apple-GENIUS call me thing. The first thing was that they called me....for about 1/4 of a second. The phone blipped for less than a ring and then I got an email saying, "Oh, we TRIED to reach you and you weren't there. Why don't you call us?". So I called and was immediately put on hold. When one of the geniuses finally picked up, I described the issue with great patience and his insightful answer was, "let me put you on hold while I talk to my supervisor." So I sat on hold for five minutes until...they just hung up...no answer, no, "gee we think you're SOL"....just "click". Thanks a boatload Mr. Jobs.

  • IPod 30GB will not work with 3rd party USB 2.0 PCI card

    I've had an IOGear PCI USB 2.0 card (GIC220U-BIO) in my Sawtooth for some time now, and have been using it flawlessly with my Canon i860 printer, and Canon LiDE 30 Scanner.
    Just recently I received a Video iPod (30GB) and wanted to take advantage the high speed USB bus offered on that card to sync my iPod. The problem is, when I plug in the iPod to the USB port on that card, I get the transparent gray box telling me that I need to restart my mac by pushing the reset switch, or holding the power button for several seconds (in other words, freezes).
    The iPod works fine with the built-in USB ports (albeit slow), as well as the high speed port on my iBook G4. Why am I getting this error? There are no drivers or firmware updates for this PCI card available.
    Is there a solution?

    Yes, use a different USB 2.0 PCI card, like from Sonnet. I use a Sonnet in a G5 and it works great. There are (at least) 2 USB chipsets and I find the TI ones are great and the other not so great.
    The fact it works on 1.1 and the 2.0 on the G4 at least tells you it is not the iPod and a USB 2 card is $20 or $30 at the most.

  • All of a sudden, my 4th gen iPod Touch no longer works with my Apple TV, has Apple "upgraded" something to kill off this older unit? (IOS 6.1.2)

    All of a sudden, my iPod Touch (4th gen, IOS 6.1.6) no longer works with Airplay on my Apple TV.  It was working and still works as a 'remote' but not with Airplay which seems to indicate I've been abandoned by the message that pops up on the screen saying in essence "too bad you don't have IOS 7.1". 

    See
    iOS: Device not recognized in iTunes for Windows
    - I would start with
    Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
    or              
    Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
    However, after your remove the Apple software components also remove the iCloud Control Panel via Windows Programs and Features app in the Window Control Panel. Then reinstall all the Apple software components
    - Then do the other actions of:
    iOS: Device not recognized in iTunes for Windows
    paying special attention to item #5
    - New cable and different USB port
    - Run this and see if the results help with determine the cause
    iTunes for Windows: Device Sync Tests
    Also see:
    iPod not recognised by windows iTunes
    Troubleshooting issues with iTunes for Windows updates
    - Try on another computer to help determine if computer or iPod problem

  • Ipod touch no longer working in car?

    Hi there,
    Both my ipod touch and nano are no longer working in the car. We have a USB port etc and have not had any issues until now. We just plugged it in, pressed CD/AUX and that was it. Now it just says "Unsupported" on the screen. Any ideas?

    snoakes wrote:
    That's likely it but I don't understand what that means.
    It means that either:
    (a) Your stereo never did fully comply with Apple's communication protocol. The only reason it worked before was because Apple previously did not use something in the defined protocol until now. Now that they are, your stereo no longer communicates with the iPod. Apple is still complying with their protocol, but your stereo can no longer capitalize in a prior limitation in the iPod OS.
    OR
    (b) Apple either did not define the protocol completely (or accurately), or they muffed the code that would ensure compliance to their own defined protocol.
    snoakes wrote:
    Will it ever work again? Any way around this. Seems kinda dumb to update something and then suddenly it no longer works with the stuff I have (ie a car!!)
    You can see if there is a firmware update for your stereo, or you can wait and hope for a change in the iPod OS someday that will restore functionality. You might also be able to step down a revision in your iPod OS.
    In any case, you can report your problem here:
    Touch Feedback: http://www.apple.com/feedback/ipodtouch.html
    Nano Feedback: http://www.apple.com/feedback/ipodnano.html

  • IPod Touch no longer working with car Head Unit since update

    Hi there, I have a problem with using my iPod Touch with my car's head unit.
    I've been using my iPod Touch with the Alpine IDA X001 Head unit fitted in my car for the last 3 months without any problems, however I installed the latest software update for the Touch (v4.0) and now the head unit connects and then says no USB device. At first I thought it was the cable as the cable supplied with the head unit is pretty fragile, so I've replaced it with a new one but it still doesn't work.
    I've tested with my iPod Nano and it works perfectly so its not a problem with the head unit or lead (I plugged the Touch in and it didn't work, plugged the Nano in and worked perfectly and then plugged the Touch in and didn't work).
    Can anyone help or is it gonna be a case of Restoring the iPod Touch back to factory settings ????

    I was also having this problem with my Kenwood car stereo. I went into the store and they did a complete restore. I didn't think it worked but the next time I plugged it into my usb to connect with my car stereo it worked. So you might try doing a restore.

  • Ipod touch no longer working with isimple device?

    I have a 4th gen Ipod touch that was working just fine with my isimple device in my vehicle until I believe I updated the ipod to the latest firmware. I now recieve a message saying device is not compatible with Ipod, Is there anyway I can rollback to the previous version which I believe was 6.1.2? Thanks!!

    Downgrading the iOS is not supported by Apple.
    Sometimes this works:
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Reset all settings      
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:                                 
    iOS: How to back up                             
    - Restore to factory settings/new iOS device.
    Go to the devices support site and see if they have anything. Maybe a firmware update is available. Otherwise you will have to wait for a firmware or iOS update.

  • TS1591 my ipod touch no longer works since ios 6 update!!!!!!!!!!!!!  FIX THIS PROBLEM

    touch no longer works since ios 6 update!!!!!!!!!!!!!  FIX THIS PROBLEM

    Did you fail transfer all purchases to your computer before attmeoting to update?  not good.  ''You can redownload some itunes purchases in some contries:
    Downloading past purchases from the App Store, iBookstore, and iTunes Store
    You will need to restore.  If you are unable then read this:
    iOS: Unable to update or restore

Maybe you are looking for

  • Urgent - please help with parsing HTML

    Hi, I'm very new to Java - i'm a biology major, actually, but taking this class for fun. Unfortunately, I'm having quite a bit of trouble with it. I've written a class that downloads a web page, converts it to a string, and then sends the string to a

  • Problem with csv

    I am trying to migrate storage for hyper-v vm's to a new csv.  When I try to move any VM's storage to the new target I get the following error.. an error occurred while moving the virtual machine storage 0x80071008 invalid parameter. I have already u

  • Apple AV Connection kit question

    Does the Apple AV connection kit allow you to view your playlists/music on the TV screen, choose your songs and have them play through your home theater receiver (considering you've connected the dock to the receiver and have an output going to the T

  • Hello urgent batch management issue

    hello to every one   iam having issue , while creating sales order , if material batch is going to expire in next 3 months then system should not save that sales order , system has to pop up message to save the sales order or not if any one having so

  • How to make a control to let the user to select a type of line?

    Dear All, I want to make a control to let the user can select a type of line from some types. Just like selecting the line type of plot in the graph. Is there any good way to do it, or is there any examples? Thank you.