5G iPod Crashes when it gets cool

I was using my iPod outdoors in 40 degree weather. I had left it sitting on my deck for about half an hour, so it had time to get to ambient temp. I was able to go through the menus and choose a song, but when I hit play, the screen immediately went black, then switched to white with a black bar covering the lower 1/3rd of the screen. The ipod was totally unresponsive. I reset the iPod, and shortly after the Apple logo appeared, it reverted to the frozen screen with the black bar at the bottom.
I took the iPod back into the house, let it warm up for half an hour, and it worked perfectly. I've can reproduce the behavior every time I cool the iPod down to around 40 degrees or below.
Any suggestions? Thanks

Since you've already tried restoring, you've done half of the work.
The next step is to drain the iPod completely. I am talking about running the battery down to the point where pressing a button won't even turn it on.
Once it gets to that point, try reconnecting it and restoring it again in iTunes. This can fix quite a few issues. However, if the problem is hardware-related... this won't help you.
It's worth a shot, though!

Similar Messages

HT1373 So i bought music on a different computer but oAn the same itunes account and on the same ipod and when i get on my original computer and i sync my ipod my purchases that were on the other computer didnt show up. How can i put them on my computer/i

So i bought music on a different computer but oAn the same itunes account and on the same ipod and when i get on my original computer and i sync my ipod my purchases that were on the other computer didnt show up. How can i put them on my computer/ipod

Download them to the computer to which the iPod is synced, re-sync.
Downloading past purchases from the App Store, iBookstore, and iTunes Store - http://support.apple.com/kb/ht2519 - enabled with iTunes 10.3 and newer; not available in all countries; apps, books (not audiobooks), music, t.v. shows, and movies (some - not all studios have permitted this). Movies currently available in the USA only. Downloading previously purchased movies and TV shows requires iTunes 10.6 or later. Discontinued items not available. For items not included in the iCloud list, or locations or computer systems where iCloud is not (yet?) available, you only get one download per fee paid. Apple notes it is your responsibility to back up your purchases.
Select the store on the left side of iTunes.
Click on Purchased on the right side under Quick Links.
You can re-download your available previous purchases.

I am trying to sync my itunes with my ipod, but when I get to step 3 of syncing, it stops. Also, I deleted all the songs on my ipod, and when I go to my music in my ipod the songs are all still there and in a grey color and I'm not able to select them.

I am trying to sync my itunes with my ipod, but when I get to step 3 of syncing, it stops. Also, I deleted all the songs on my ipod, and when I go to my music in my ipod the songs are all still there and in a grey color and I'm not able to select them. How do I completely clear my ipod music, and how can I solve the syncing problem?

Sync works the same way it always has, connect the device, select the content desired to sync and sync.
All the media should be in iTunes already, iDevices are not and have never been backup devices.
If this is a new computer, move the content from the old computer to the new computer.

Safari crashes when I get to a certain bookmark. What can I do?

It all started when my bookmarks and reading list disappeared and then reappeared. Now, whenever I scroll down my bookmarks list, safari always crashes when I get to a certain one. So I am never able to get to the bottom of the list. This has never happened to me before and I'm really frustrated with this issue. If anyone had a similar experience or any tips that they could give me, that would be great!
I've already tried:
- Closing safari, then reopening
- Restarting my iPhone
- Clearing my history, cookies, and data in settings

Thank you for your time. I have been trying to get them to fix it forever and they said it was done. Just wanted someone else to confirm it is still broken. Again, thank you. Is there any way I can get them to see this conversation?

IPod crashes when attempting to play Logic songs

I am quite new at Logic and have two questions:
1
When I bounce a Logic project to iTunes, I have no problem listening to the song on my computer - in iTunes. But when i sync my iPod and then click on the song there, the iPod 'crashes' (needs rebooting) - and when it's ready again, nearly all the battery power has gone.
I have tried most of the options when bouncing ... aiff, wave, mp3, m4p etc ... all of which give the same result.
2
How come the 2,000 page Logic manuals - as far as I know - never touches upon the subject of mastering?

therecordinggenius wrote:
I am quite new at Logic and have two questions:
1
When I bounce a Logic project to iTunes, I have no problem listening to the song on my computer - in iTunes. But when i sync my iPod and then click on the song there, the iPod 'crashes' (needs rebooting) - and when it's ready again, nearly all the battery power has gone.
I have tried most of the options when bouncing ... aiff, wave, mp3, m4p etc ... all of which give the same result.
Sounds like a F^&*ed up iPod. IMO.
2
How come the 2,000 page Logic manuals - as far as I know - never touches upon the subject of mastering?
Because Logic is mainly used to create music / post production. Not so much for mastering. The guys who created Logic are not mastering engineers..but musicians.
If you want to master with Logic, you CAN. Go get a good book on mastering... there's a few out there.
Cheers

My iPod crashes when I try to play a podcast

For the last few weeks, whenever I go to play a podcast I have downloaded it gets a minute in and then my iPod crashes and resets itself to the menu page. Everything else - songs, videos etc all work properly, it's just the podcast. Can anyone help me stop it doing this? It's really annoying.

For the last few weeks, whenever I go to play a
podcast I have downloaded it gets a minute in and
then my iPod crashes and resets itself to the menu
page. Everything else - songs, videos etc all work
properly, it's just the podcast. Can anyone help me
stop it doing this? It's really annoying.
I'll bet it's annoying! Does it do it with EVERY podcast you download, or just one? Is it sound only or a video podcast?

Why Are Apple Not Addressing This Problem Of Ipod Crashing When Synicing!

I bought 15 Ipod Classics for my Employees for to use while working on software projects, and all 15 ipod crash at 3.xGB no matter which machine we use to put the 16.5GB of music on (we asked the employees to bring the music in and we have a music lience), and we have used the developers pc spec(Described below) the helpdesk pcs, sales, marketing (who use macs), finance, the music was stored on a seperate HDD for ease.
why is there no answer for this problem, ever where you look on apple theres no anwser.
we have a mac specialist on site and he is stumped by this problem, can someone please give an anwser please!!!!
thank you in advance.
Connor Greer.
Crazy Computing Connor.
Chairman, And The Developement Division.

If you find anything I'd love to hear it.
I just posted my annoyances here: http://discussions.apple.com/thread.jspa?threadID=2411594&tstart=0
So far, nothing has helped. Have tried multiple things:
- reboot mac - fail
- "reset" ipod - fail
- repartition ipod (erases everything, has to reset a few things, start from scratch) - fail
- "restore" ipod (downloads firmware, installs it, erases everything!) - fail
- move library from external drive to internal drive (mac mini) - fail
- delete itunes, download, reinstall - fail
- install itunes 8.2 - fail
- install itunes 9.1 (over 8.2) - fail
- manage library manually - fail
- use powered hub instead of plugging in directly - fail
- unplug other usb devices - fail
Always end up with error message saying it can't read/write to the ipod.
NOTHING has worked. Went to store yesterday, guy confirmed ipod working and said delete/resinstall and if that doesn't work to bring the mac in. [You can read my experience trying to do that.]
My guess is Apple either screwed something up for ipod classics when they were wasting time screwing with Palm Pre's ability to sync with iTunes (as has been suggested in other threads) and doesn't want to admit it, or they just plain don't care about ipod classics because we should be good little apple sheeple and buying ipads. I'm just a little disgusted right now, so my opinion is just slightly biased at the moment.

Why does LabView 7.1 crash when using "Get Channel Info" vi ?

Hello,
I have written a program to get channel information for all my virtual channels. It worked fine in Labview 6i but when we upgraded to 7.1, it crashes with "Labview has generated errors and will be closed by WIndows". We have a SCXI-1001 with 6 SCXI 1102 modules, 2 SCXI 1102B modules, 1 SCXI-1102C module, and one SCXI-1140 module. Debugging reveals that the program crashes when the 1102C module channels are reached. I have attached the code I am currently using. Any help is appreciated. Thanks, Neil
Attachments:
maxinfo.zip ‏133 KB

Hello,
I have two questions for you please:
1. You mentioned early that debugging revealed that the problem was being originated on the SCXI-1102C module. Can you please try taking this module out and test your program again? Also try testing only one module and see if it works, then keep on adding more and see what happens.
2. I run your program on LabVIEW 7.1 and it didn't give me any problems. In general, anything on LabVIEW 6.1 cab be recognized by LabVIEW 7.1, so maybe the order of installation you did is not correct. Did you first take the board out, uninstall the previous version of NI-DAQ you had, install LabVIEW 7.1, then NI-DAQ 7.3 and then plugged the board in?
Please let me know about this.
Thanks,
LA

Will my ipod sync when i get my new one?

My son dropped my iPod touch and i am sending it back and getting a new one and i am wondering when i get the new one will the new iPod touch sync with the apps that i had bought with the old one?

You just plug it in. Syncing them to it is done the same way you synced them to the first iPod.
(78599)

Is it bad to charge iPod everyday when it gets to less than 20%?

Well I charge my iPod everyday and i charge it when it gets to less than 20% every time . Is this bad? Is it ok to charge at 50? I usually don't because there is still battery left so.. I just use it till its at 10% and charge it

Charge whenever you want to. There are mixed reviews out there, but the general concensus seems to be to not let it always run flat before recharging, hard on this type of battery, so charge when you need the power to get through the day.

Ipod crashes when connects to computer

My 20 GB Ipod has been acting funny the last couple of days showing me the battery sign with the exclamation mark, not allowing me to turn it on, I have managed to correct this by placing it on charge with the mains adapter. The Ipod now starts fine and plays all the songs with no errors but as soon as I connect it to the computer it crashes and freezers on the position it was left in, not even reaching the "do not disconnect screen". The computer only sees it as a un- recognizable USB device. I have to restart it to get it working again but as soon as I try and complete the connection with my PC again it crashes. There is also a new sound when I start the Ipod like 2 little faint beeps that have never been there before.
Please can somebody help as I use my Ipod as my hard drive plus over 2000 songs that are not backed up.
Thanks

I still have no look with my pod, ive tried everything, it plays fine but will not connect to the computer and crashes, i am now able to get do not disconnect sign and the disk drive logo but it just freezers and stays on that screen. It also generates a Removable disk drive in My Computer but cannot access it.
Please can somebody help me out there
Thanks

Ipod crashing when calibrating

HI,
I have already done a full rest of my ipod nano (6th gen I think - the one with a screen and a clip at the back, about a year old) but still, every time I go to calibrate my ipod after running, it crashes. I keep the receiver plugged in throughout my run to connect to my shoe pod. It used to work perfectly but I recalibrated it a month ago, and when I went to calibrate it further, it crashed and has continued to crash ever since despite the full reset.
It still records the run, just the wrong **** distance!
Any help?
Thanks

Well, 2 steps (actually runs) and now one step back! So the other sensor I used at the weekend was one which I had linked a few years back as a reserve, but had never used. But, on Saturday, it worked very simply, stuck it in the shoe, and off I went - the runs were recorded properly, and I managed to get those runs uploaded to the nike site yesterday easily enough after a little research.
BUT, the bad news, I went to run this evening, and no sensor was being picked up by the ipod. Nada, nic, nothing!! AArgh. Have looked at the settings, it says there's a sensor linked, and there soes not seem to be anyway to unlnk an existing sensor (I thought about doing that and then relinking it).
So why would it work perfectly well two days ago, and now not at all!!

IPod crashes when I click in certain artist

I posted this in the 3g forum but I guess this one is more suitable, so if a mod would like to delete the other one that would be great.
Ok, this has never happened before and my phone is new. Not even a month old. Anyways, I synced some new music onto my Ipod and now when I click on a certain artist(Lady Gaga), it freezes for a second and crashes.... I'm extremely worried about this. And it only happens when I click on Gaga. The weird thing is, when I click on her name the first time, I goes fine, but then I went back and did the same thing, and it crashed. I even tried removing the new songs I added of hers and re syncing it and nothing. My phone isnt old at all so I dont know whats wrong. And I dont know if this makes a difference, but last night, I plugged in my phone when the battery was less than half and about a minute after i plugged it in, the ''full charge'' symbol appeared(which I thought was odd of course, because it hadnt even been in for a minute), but when I unplugged it, I was back to being less than half full.
Edit:I forgot to mention that sometimes when I sync my phone, my computer freezes and when I plug it in a ''MobileBackup encountered a problem..'' message pops up....
Anyone think they can help me out, please? (I'm very un-techy, so if you can dumb it down for me as much as possible, that would be very helpful)

I did think that so I removed the new gaga songs I had added and still nothing. Could it maybe be a totally other artists song? Because the songs worked fine before.

Ipod Crashes when I Click on Certain Artist.

Ok, this has never happened before and my phone is new. Not even a month old. Anyways, I synced some new music onto my Ipod and now when I click on a certain artist(Lady Gaga), it freezes for a second and crashes.... I'm extremly worried about this. And it only happens when I click on Gaga. The weird thing is, when I click on her name the first time, I goes fine, but then I went back and did the same thing, and it crashed. I even tried removing the new songs I added of hers and re syncing it and nothing. My phone isnt old at all so I dont know whats wrong. And I dont know if this makes a difference, but last night, I plugged in my phone when the battery was less than half and about a minute after i plugged it in, the ''full charge'' symbol appeared(which I thought was odd of course, because it hadnt even been in for a minute), but when I unplugged it, I was back to being less than half full.
Edit:I forgot to mention that sometimes when I sync my phone, my computer freezes and when I plug it in a ''MobileBackup encountered a problem..'' message pops up....
Anyone think they can help me out, please? (I'm very un-techy, so if you can dumb it down for me as much as possible, that would be very helpful)
Thanks a bunch!
Matt.
Message was edited by: batboy99
Message was edited by: batboy99

I did think that so I removed the new gaga songs I had added and still nothing. Could it maybe be a totally other artists song? Because the songs worked fine before.

New update 10.6.1 is making my iPod crash when I plug it in to update

Please help I just did the update today and when I went to plug in my ipod to add more music to it, it crashed. I waited for it to reboot and when it did I pluged it back in. I then tried to add music to the ipod again, but still same thing. Both times there was a notification that popped up saying that the sync couldn't be successfully completed because the ipod has been disconnected. I tried to reset it to factory settings thinking that it had to do with the ipod and still nothing. Everytime I go to do a software update this always happens I am really sick of it!!! Please if anyone could help I would appreciate it.

What have you tried so far in terms of troubleshooting this issue? Are you plugging the iPod into a high powered USB 2.0 port on the back of your PC? Have you tried a different USB cable?
What happens if you try to reset the device with it still connected to the PC?
How to reset iPod
Has this iPod ever worked on this PC or is this the first time you have time you have tried connecting it?
Have you carefully worked through each and every single suggestion in this Apple support document?
iPod not recognized in 'My Computer' and in iTunes for Windows
B-rock

5G iPod Crashes when it gets cool

Similar Messages

Maybe you are looking for