5G iPod resets while listening to playlists?

Any help would be appreciated on this. At home, I recently upgraded to iTunes 7. I am also current with my iPod upgrades.
Since then, my 5G iPod (30GB) has started resetting itself seemingly randomly while I am listening to music - the song stops and the black screen/silver apple show up, then it goes back to my top-level menu.
None of my music is missing, and I haven't had any audio trouble. I am wondering, however, if having iTunes 7 at home and iTunes 6 at work (they won't let us download software upgrades) is causing some sort of system conflict.
Any advice? Is this just simply a question of rebooting the thing?
Thx.

replying to chillywillymm
I have this same problem with a couple of podcasts: Democracy Now and le show.
by any chance, are those podcasts mono mp3s? if so, it might be worth trying the workaround from this document:
Fifth Generation iPod resets when playing some mono MP3 songs and podcasts

Similar Messages

  • Ipod froze while listening

    i have a 30GB iopd with video.it froze while i was listening to it.I tried to restart as well as reset it but it just wont respond.I tried to connect it to the usb but now the computer wont recognize it.It is still showing the song i was playing on it but it wont respond.Any ideas???????

    Make sure you are resetting the iPod correctly.
    How to reset the iPod if it appears frozen or doesn't respond.
    It may take quite a few attempts and is best done connected to power.
    Also, see these.
    iPod won't turn on.
    iPod battery doesn't charge.
    Your Windows PC doesn't recognize the iPod is connected.
    Putting iPod into disk mode.
    Restoring using disk mode is often the key.
    Just as an aside, if you have more questions about the iPod with video, it should be posted in this forum.
    Using iPod 5th generation.

  • My ipod resets when listening to music

    my new ipod has started to give me problems. while im listnening to music my ipod will stop playing music and a black screen will show with a spining wheel in the center then it resets and goes to the home screen. when i try to open my music again it does the same thing. to fix it i turn it off and on again or conect it to the computer but the problem comes back again. i have never dropped my ipod or damaged it in any way.. i belive its the operating sistems problem but if anyone know the aswer to my problem please help

    It depends on how your iPod is set up to sync music from your iTunes library whether that be automatically or manually.  If it's automatically, simply remove the tick mark next to "Sync Music" from under the iPod's music configuration pane in iTunes.
    To access this pane, plug your iPod in and when it appears in iTunes, click on its name from under the Devices section in the left hand pane of iTunes.  This will bring you to the iPod's Summary pane.  Now locate the Music pane along the top.  Remove the tick mark next to Sync Music and hit Apply.  This will remove all content from the iPod.  When it has finished, re-select the Sync Music option and again hit Apply to re-sync all your music back over to your iPod from iTunes.
    B-rock

  • IPod resets while plugged in

    For the past few days, nearly everytime I plug my iPod Touch (2nd gen) into my PC it resets itself during playback through my iPod. Any help out there?

    I'm having the same problem. Did you fix it in the end?
    Mine resets on its own to the first of january 1970 as well.

  • IPod resets itself while trying to play certain songs.

    For no specific reason, this has only happened so far with audio from my "Comedy" playlist. Either this is coincidental or my iPod lacks a sense of humor. Please let it be the former.
    Anyway, when this occurs it takes me to the silvery Apple logo screen and the iPod resets. However, it only happens when I start to play the file. If I go through the list hitting the next button while on pause, there's no problem.
    Two questions:
    1) Has anyone else encountered this?
    2) Can anyone tell me what's going on and how to correct it?
    As a side note, this also happened with my old monochromatic 20GB 4G iPod, but that issue was more randomly initiated, and was probably due to its failing battery.
    30GB 5G iPod Video, the newer model   Mac OS X (10.3.9)  

    This has been asked and answered a couple of times and I think that the same answer should help you out.
    Seems like you're a victim of the 1.2 firmware bug. It's causing mp3 mono tracks (which I could very much believe some comedy routines would be encoded as) to reset your iPod. the only workaround at the moment seems to be to set your EQ to OFF (under Settings > EQ > OFF). That seems to work for some people.
    Your other option is to try and reencode your tracks so they're not mono-mp3.
    I hope that helped. =)

  • My Ipod recently purchased went locked by itself while listening to some music. Have restaured it using Itine. It remains locked as soon as the Ipod his disconnected. N Hold switch either.o effect of the

    My Ipod Classic recently purchased went locked while listening to some music. Have used the reset procedure using Itunes. The Ipod remains locked as soon it is disconnect from the Macbook. No effect from the Hold switch either.
    Has any one encountered the same problem?
    Thanks

    My Ipod Classic recently purchased went locked while listening to some music. Have used the reset procedure using Itunes. The Ipod remains locked as soon it is disconnect from the Macbook. No effect from the Hold switch either.
    Has any one encountered the same problem?
    Thanks

  • Ipod shuffle 2 gen. while listening to music shuts down after 3-4 minutes

    ipod shuffle 2 gen. while listening to music shuts down after 3-4 minutes (many times flashing red light). Shows the full battery charge (green signal). . Restore did not help ...

    Make sure your headphone plug is pushed all the way into the connecton until no silver is showing.  You will hear a click and feel it snap all the way in.

  • 3 beeps while listening to ipod

    so, while listening to a song, i seem to have gotten 3 beeps on playback. the song doesn't stop or anything, it just beeps three times and then resumes playback. strange. any ideas?

    Does this happen on every song?
    If it's just one song, there are no beeps in that songs when you listen to it with iTunes?
    Are the beeps coming through the headphones, or the iPod's internal speaker?

  • I reset my whole ipod and while reloading its stuck on the apple symbol

    I reset my ipod from the menu in my ipod and while it was doing it the apple logo popped up and now its been stuck like this for 3 hours help help help

    Placing your device into recovery (DFU-Device Firmware Upgrade) mode:
    Follow these steps to place your iOS device into recovery mode. If your iOS device is already in recovery mode, you can proceed immediately to step 6.
       1. Disconnect the USB cable from the iPhone, iPad, or iPod touch, but leave the
           other end of the cable connected to your computer's USB port.
       2. Turn off the device: Press and hold the Sleep/Wake button for a few seconds
           until the red slider appears, then slide the slider. Wait for the device to turn off.
                  * If you cannot turn off the device using the slider, press and hold the
                    Sleep/Wake and Home buttons at the same time. When the device turns off,
                    release the Sleep/Wake and Home buttons.
      3. While pressing and holding the Home button, reconnect the USB cable to the
           device. The device should turn on. Note: If you see the battery charge warning,
           let the device charge for at least ten minutes to ensure that the battery has some
           charge, and then start with step 2 again.
      4. Continue holding the Home button until you see the "Connect to iTunes" screen.
           When this screen appears you can release the Home button:
      5. If necessary, open iTunes. You should see the following "recovery mode" alert:
      6. Use iTunes to restore the device.
    If you don't see the "Connect to iTunes" screen, try these steps again. If you see the "Connect to iTunes" screen but the device does not appear in iTunes, see this article and its related links.
    Note: When using recovery mode, you can only restore the device. All user content on the device will be erased, but if you had previously synced with iTunes on this computer, you can restore from a previous backup. See this article for more information.
    Failing this I would take it in for service.

  • My ipod 120GB keeps resetting while playing, any hints?

    my ipod 120GB keeps resetting while playing, any hints?

    The problem is the "screen saver". Normally after some time the backlight of your ipod is switched off automatically and a clock appears. This doesn't work properly and leads to resets.
    The solution: You have to go in the main menu to "settings/backlight and activate "Always on". After that your ipod should work properly. To avoid a very low battery runtime now, you have to adjust the brighness settings to a low value.
    This also solves problems like radomly skipping songs or stopping playback.
    I really would like apple to solve this problem, but i doubt this will ever happen.

  • My ipod froze while reseting what can i do?

    My ipod froze while reseting what can i do ?

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try on another computer                 
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar       

  • Listening from iPod mini while connected

    My computer speakers are broken so I was wondering how to listen to the music from my iPod mini while its connected to my computer and I'm doing stuff in iTunes. I can't find an option in iTunes and I've tried plugging the headphones straight into my computer but no luck. any ideas?

    You will need to set the iPod to manually update your music. Then you will be able to listen to your iPod when it's hooked up to your computer.
    If you're running iTunes 7.0 just follow these directions.
    http://docs.info.apple.com/article.html?path=iTunesWin/7.0/en/2580.html
    You'll then be able to browse and listen to your music on the iPod like you would if it was on your computer.

  • IPod resets when selecting playlists.

    I recently updated to the 1.1 version of the iPod nano 6th gen. Everything was fine before the update, but afterwards, when I tried to access my playlists, the iPod just reset. Now every time I try to go select a playlist the iPod resets after I hit the playlist icon. What do I do?

    That is strange. Have you tried resetting?
    Hold down the volume down and the sleep/wake button till the screen goes dark. See what happens after that.
    The only other thing would be to connect it to your computer then hold down the volume up, down and sleep/wake button till iTunes tells you it is going to restore it.
    let us know what happens
    Also, how many playlists have you sync'd with the nano?
    What kinds of playlists are in that mix?
    If there are smart playlists, what are the criteria you have set in them?
    i

  • IPod touch no longer synching playlists

    Hi,
    A couple of days ago, my iPod Touch no longer syncs playlists. I have a couple of playlists with a few hundred songs. The playlist shows up on the iPod in the playlist menu, but if you go into the playlist, it only shows 2 or 3 songs. But if you go under songs, all the songs are there.
    Steps I've taken to fix this:
    1. Reset iPod. No change.
    2. Deleted and created a bunch of entirely new playlists, error still occurs.
    3. Restored iPod to factory settings. No change.
    4. Uninstalled iTunes and reinstalled. No change.
    Has anyone seen this before? It's very annoying. I'm stuck listening to all my songs on shuffle, even if I just wanted to listen to a select few I put in the playlist.

    Auto-synching.
    The playlist is a Smart Playlist, created with the following rule:
    "name" "starts with" and then the letter, which I change daily.
    Options checked are:
    Limit to 10gb selected by random
    Match Only Checked Items
    Live Updating
    Again, when I sync, all the songs make it over, but the playlist is empty or only contains a couple of songs. This only seems to happen with Smart Playlists. If I select all the songs in the smart playlist, then create a new playlist based on the selection, this will sync properly.

  • Ipod consolidated all of my playlists into one

    While updating Ipod consolidated all of my playlists into one. And I thought if I got rid of the super playlist it would have to go back to the regular system. The library and all the other playlists are still intact but now it says, "Ipod cannot update becasue there are no songs in the playlist." But there are songs there and there are songs in the library as well. What's wrong? What happened? What did I do wrong?
    Ipod-Nano   Windows 2000   2GB

    Open iTunes prefs -> iPod.
    it should be set to Auto update only selected playlists.
    Select the playlists you want to go onto the iPod.

Maybe you are looking for

  • Can you use the same external hard drive for Time Machine backups and as an additional storage drive?

    I have an external HD that I've been using exclusively for Time Machine backups. I need to clear space on my hard drive, so I was thinking to move music & photos to an external drive.  Wondering if I can use the same one I have (which I'll aslo keep

  • To sum values in a internal table

    hi iam using below loop    Loop at it_table.    At end of amount.    sum.    endat.    At end of field2.    sum.    endat.    endloop. my purpose is to sum all values of the table field1 and field2 and use it to display please let me know how to do i

  • Changing condition type values in Billing Doc Line Items

    Hi All, I want to change the value of condition types JLST and JCST to zero in the line items of proforma invoices. How can I do this? Any function module or BAPI? Should I go for BDC?? I tried to find user exits. What can be the optimal way to do th

  • MainStage 2.1 release (64-bit)

    MainStage 2.1 Update This update delivers improved compatibility and numerous fixes. Issues addressed include: Support for 64-bit native mode Compatibility with 64-bit Audio Unit plug-ins Improved compatibility with MainStage 1.x documents Multiple P

  • I can't play music... I need help

    I can't play music anymore on my I phone i hit the play symbol and it changes to a pause and the scrubbing bar stays at 0:00, all of my other audio works just fine but I really need my music back