5ghz Wifi doesn't work in Flight-Mode with Wifi tu...

** Lumia 820 **
Turn Flight-Mode [ON].   This disables all wireless connections, including phone network, bluetooth, and wifi AS EXPECTED.  
Now manually turn Wifi [ON].  5ghz networks will not show as available.  2.4ghz networks both show, and connect normally.
Turn Flight-Mode [OFF].  5ghz networks now show and work normally.  This is non-sensicle.
Can anyone confirm that their phone contains the same bug.
OS Version: 8.0.9903.10
Firmware Rev Num: 1232.2109.1242.1001

you would need to ring nokia themselves or visit a nokia store to report this as an issue. Whilst this forum is the nokia forum, its for the community to help each other.. Nokia reps rarely discuss issues on here. They may make announcements from time to time.
Having said that both the moderators and some nokia staff do visit the pages to keep an eye on things such as these issues, even though they don't comment on them directly.
I would be keen to see if this issue is related to the firmware or the hardware. Obviously if its hardware related then maybe Nokia can look at it for future models, if it firmware related then Microsoft may be able to fix it in some future release.

Similar Messages

  • All of a sudden wifi doesn't work.  It says no wifi hardware is installed... Anyone else have this issue?

    This is actually for my girlfriend's 2012 BMA. 

    Reset the System Management Controller (SMC).
    If that doesn't work, make a "Genius" appointment at an Apple Store to have the machine tested.
    Back up all data on the internal drive(s) before you hand over your computer to anyone. If privacy is a concern, erase the data partition(s) with the option to write zeros* (do this only if you have at least two complete, independent backups, and you know how to restore to bare metal from any of them.) Don’t erase the recovery partition, if present.
    *An SSD doesn't need to be zeroed.

  • My wifi doesn't work if I keep my data services off

    Hey. My wifi doesn't work ( i cant surf) with data services off. and if i keep data services on that is if my blackberry services..and surf the webpages ..my balance gets decducted..but i have unlimited blackberry plan. and on the first place my balance shouldnt  be deducted because i am using my wifi ( in case my page gets  open through wifif not blackberry services) and if i am using my balckberry internet either way my balances shouldnt get decducted. i have torch 9800 and my service provider is VODAFONE INDIA please help me out cus i cant use my wifi..without bbm services.. 

    knottyrope wrote:
    What device and OS are you using?
    With my torch 9860 on OS 7.1.0.402 i can still have BBM and surf with data services off and wifi on.
    Yes, this is something [NEW]... we know that.
    (**Edit, sorry I left out the word new earlier.)
    1. If any post helps you please click the below the post(s) that helped you.
    2. Please resolve your thread by marking the post "Solution?" which solved it for you!
    3. Install free BlackBerry Protect today for backups of contacts and data.
    4. Guide to Unlocking your BlackBerry & Unlock Codes
    Join our BBM Channels (Beta)
    BlackBerry Support Forums Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • M3800 Developer Edition: wifi doesn't work after sleep

    I have an M3800 Developer Edition (2015 model). Ubuntu is factory-installed 14.04, with hardware enablement stack installed. Recently (past 1-2 weeks) wifi doesn't work after sleep (lid closed or open doesn't matter), and only rebooting gets in back. Tried rmmod and modprobe with no success. Has anyone else seen this, and/or are you aware of any open bug(s) for this?
    Relevant ouput:
    lsmod when problem exists:
    iwlmvm                217725  0
    mac80211              652718  1 iwlmvm
    iwlwifi               179412  1 iwlmvm
    cfg80211              494362  3 iwlwifi,mac80211,iwlmvm
    rfkill list when problem exists:
    1: phy0: Wireless LAN
            Soft blocked: no
            Hard blocked: no
    3: hci0: Bluetooth
            Soft blocked: no
            Hard blocked: no
    rmmod the above, then modprobe iwlwifi. Does not fix problem, only rebooting does:
    May  4 08:23:14 jonathan-m3800 kernel: [69089.189614] cfg80211: Calling CRDA to update world regulatory domain
    May  4 08:23:14 jonathan-m3800 kernel: [69089.192181] cfg80211: World regulatory domain updated:
    May  4 08:23:14 jonathan-m3800 kernel: [69089.192184] cfg80211:  DFS Master region: unset
    May  4 08:23:14 jonathan-m3800 kernel: [69089.192185] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
    May  4 08:23:14 jonathan-m3800 kernel: [69089.192187] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
    May  4 08:23:14 jonathan-m3800 kernel: [69089.192188] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
    May  4 08:23:14 jonathan-m3800 kernel: [69089.192189] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm), (N/A)
    May  4 08:23:14 jonathan-m3800 kernel: [69089.192190] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
    May  4 08:23:14 jonathan-m3800 kernel: [69089.192191] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A)
    May  4 08:23:14 jonathan-m3800 kernel: [69089.204141] Intel(R) Wireless WiFi driver for Linux, in-tree:
    May  4 08:23:14 jonathan-m3800 kernel: [69089.204143] Copyright(c) 2003- 2014 Intel Corporation
    May  4 08:23:14 jonathan-m3800 kernel: [69089.204414] iwlwifi 0000:06:00.0: irq 48 for MSI/MSI-X
    May  4 08:23:14 jonathan-m3800 kernel: [69089.204904] iwlwifi 0000:06:00.0: loaded firmware version 25.228.9.0 op_mode iwlmvm
    May  4 08:23:14 jonathan-m3800 kernel: [69089.207709] iwlwifi 0000:06:00.0: Detected Intel(R) Dual Band Wireless AC 7260, REV=0x144
    May  4 08:23:14 jonathan-m3800 kernel: [69089.207790] iwlwifi 0000:06:00.0: L1 Enabled - LTR Enabled
    May  4 08:23:14 jonathan-m3800 kernel: [69089.208150] iwlwifi 0000:06:00.0: L1 Enabled - LTR Enabled
    May  4 08:23:14 jonathan-m3800 kernel: [69089.392408] ieee80211 phy0: Selected rate control algorithm 'iwl-mvm-rs'
    May  4 08:23:14 jonathan-m3800 NetworkManager[901]:    SCPlugin-Ifupdown: devices added (path: /sys/devices/pci0000:00/0000:00:1c.2/0000:06:00.0/net/wlan0, iface: wlan0)
    May  4 08:23:14 jonathan-m3800 NetworkManager[901]:    SCPlugin-Ifupdown: device added (path: /sys/devices/pci0000:00/0000:00:1c.2/0000:06:00.0/net/wlan0, iface: wlan0): no ifupdown configuration found.
    May  4 08:23:14 jonathan-m3800 NetworkManager[901]: <info> (wlan0): using nl80211 for WiFi device control
    May  4 08:23:14 jonathan-m3800 NetworkManager[901]: <info> (wlan0): driver supports Access Point (AP) mode
    May  4 08:23:14 jonathan-m3800 NetworkManager[901]: <info> (wlan0): new 802.11 WiFi device (driver: 'iwlwifi' ifindex: 4)
    May  4 08:23:14 jonathan-m3800 NetworkManager[901]: <info> (wlan0): exported as /org/freedesktop/NetworkManager/Devices/2
    May  4 08:23:14 jonathan-m3800 NetworkManager[901]: <info> rfkill5: found WiFi radio killswitch (at /sys/devices/pci0000:00/0000:00:1c.2/0000:06:00.0/ieee80211/phy0/rfkill5) (driver iwlwifi)
    May  4 08:23:16 jonathan-m3800 ModemManager[852]: <warn>  Couldn't find support for device at '/sys/devices/pci0000:00/0000:00:1c.2/0000:06:00.0': not supported by any plugin
    lspci:
    06:00.0 Network controller: Intel Corporation Wireless 7260 (rev 6b)
    After reboot:
    lsmod |grep -i iwl:
    iwlmvm                217725  0
    mac80211              652718  1 iwlmvm
    iwlwifi               179412  1 iwlmvm
    cfg80211              494362  3 iwlwifi,mac80211,iwlmvm
    rfkill list after reboot:
    0: nfc0: NFC
            Soft blocked: no
            Hard blocked: no
    1: phy0: Wireless LAN
            Soft blocked: no
            Hard blocked: no
    2: hci0: Bluetooth
            Soft blocked: no
            Hard blocked: no

    Wi-Fi still not reconnecting after sleep 
    http://forums.macrumors.com/showthread.php?t=1229591

  • Why the wifi doesn't work after the upgrade to iOS 5?

    The problem is that after the upgrade to iOS 5 the wifi doesn't work. I mean, iPad is connected to the wifi but not to the internet and also the connection on the other device doesn't work. So I had to turn off the router and then turn it on.

    Try a hard reset first to see if that does any good.  To do this, press and hold both the Sleep/Wake and Home buttons together long enough for the Apple logo to appear.
    If no luck with that, you'll need to manually connect your iPod to your iTUnes library in recovery mode using the instructions in the Apple support document below. Doing so will allow you to bypass the passcode and restore the iPod.
    iOS: Unable to update or restore
    B-rock

  • WIFI doesn't work on startup

    When I turn on my dad's iMac (Mid July 2010, iMac) the WIFI doesn't work. When I click the WIFI icon on the menu bar is says somthing to the effect of you don't have WIFI installed.  When I restart it works. this happens every time.
    What do you think is wrong? do I need to take the iMac in to an Apple store?

    Hi,
    First, my wlan card was unknown by w7 (unknown device and I had install all the others drviers). So, because I don't know what card was in the L630, I downloaded the Atheros and the Broadcom wlan drivers.
    When I refresh in the device manager, I tell w7 to automatically find the driver (in drivers folder and in its subdirectory).
    w7 find a Broadcom card, install the driver (with the error message : file not found without any name of file) and shows in the network section of the device manager a Broadcom 802.11n card, but didn't shows the model (I think its a 43xx). Thre isn't any other unknown device in the device manager, all seems right.
    I also try to install it with the Grand Administrator account : same result !!!!!!!!!
    I have try with the Atheros drivers (just in case) but w7 tells me that there isn't any drivers found for my card (so I think its a broadcom)
    When I press Fn + F8 key nothing happens (the led of the wifi stay orange) and the hotkey bar doesn't drop down.
    Thats why I wish to rinstall the hotkey utility, but It doesn't exist for other OS than XP....
    I try to install it (the XP hotkey utility) but its make an error : common module not found
    I try to install common module then the hotkey utility, but I get the same error : common module not found
    I'm agree with you xver, install a fresh w7 64 bits then all the drivers shoud not be such problematic, I do this fort one Tecra A7 and One Aspire One 751, they works perfectly, but they where all of them under XP ......
    Next step :
    I must confirm (to my self too) if the F8 key work properly (by trying to start w7 into safe mode),
    remove any trace of the common module and the hotkey utility from the registry,
    remove the broadcom and atheros wlan driver and delette any trace in the registry,
    go in a church and light a candle for miracle ?

  • Wifi doesn't work with IOS 7

    Hi, I installed on my iphone IOS 7 but now wifi doesn't work. It doesn't find any wifi connections around me. Please help me! What can I do?

    My wifi had no problem connecting to our home wifi prior to the IOS 7 update, but since updating this morning it's not working.  My phone will try to connect to wifi, but then I get the "Unable to join the network" message.  I tried resetting network settings, but that did not solve it.  I tried @bam11's suggestion of being in airplane mode first, but still no luck.  I've had my phone open to the Wi-Fi page, and saw it connect a couple times for the slightest second, but it disconnected just as fast.  My son as the exact same phone (4s) and he's connecting just fine!  Any other suggestions?  I'm afraid to hard reset my phone.

  • Wifi doesn't work when blue tooth is enabled

    home wifi doesn't work on macbook pro when blue tooth is enabled
    Message was edited by: maggie11

    Based on my knowledge, Outlook auto archieve setting is stored in registry and only affects on local host.
    If the AutoArchive doesn't work anymore, please refer to the follow article to troubleshoot the issue
    http://www.howto-outlook.com/faq/archivenotworking.htm
    If we are talking about Microsoft Exchange Online Archiving, I think it would run fine when you in Exchange online mode as your expected.
    Tony Chen
    TechNet Community Support

  • My Wifi doesn´t work. The Wifi icon on top menu bar states there is no hardware connected. How can I resolve this as previously Wifi connection worked perfectly. Is this something that to do with the computer hardware? Please advise.

    My Wifi doesn´t work. The Wifi icon on top menu bar states there is no hardware connected. How can I resolve this as previously Wifi connection worked perfectly. Is this something that to do with the computer hardware? Please advise.

    SkyDaughter29 wrote:
    My current situation: I have soooo many texts on my iphone and I haven't deleted many because I need the information contained in them for future reference and for legal purposes.  I would really like to find a means and way to save them other than on the phone itself. I've done searches for various apps yet I'm not finding what I think I would need.  It appears Apple does not sync the texts between the iphone and my MacBook Pro.
    Try the computer apps PhoneView (Mac) or TouchCopy (Mac & PC):
    http://www.ecamm.com/mac/phoneview/
    http://www.wideanglesoftware.com/touchcopy/index.php
    Best of luck.

  • TS1398 The internet on my Iphone 4 doesn't work when I use the Wifi

    The internet on my Iphone 4 doesn't work when I use the Wifi at home. My Mac works fine. On the Iphone it shows it's connected but it doesn't open any app. Anyone knows what to do? Thanks

    Ÿ. If you tap and hold the "Y" does it appear? If so, just slide your finger up to select.

  • Hallo! I have Pavillon 5 with internet key.My new printer all-in-one doesn't work in web mode.

    hi! my new web printer doesn't work in wireless mode. Pheraps is necessary a router? Thanks to everyone can help me! :-)

    Hello maggio63,
    You would definitely need to set up a network on a router with a modem for internet connection.
    Once this is setup, you can follow this link to enable ePrint. 
    http://h71028.www7.hp.com/hho/us/en/ep/articles/setting-up-mobile-printing.html
    Although I am an HP employee, I am speaking for myself and not for HP.
    If I have resolved your issue, feel free to provide Kudos and make sure you mark this thread as solution provided.

  • Q10 I turn Camera Flash On but it Doesn't work IN ALL MODES

    Q10 I turn Camera Flash On but it Doesn't work IN ALL MODES

    I know, especially stupid that it doesn't work in stabilisation mode as its often that mode used in lower light situations that would benefit from the flash... have no idea why BB doesn't allow US to chose when we want a certain function.

  • Since update extended wifi doesn't work

    I updated my express extreme as required. Since my airport express that I use to extend my wifi doesn't work anymore. I did a reset and when I try to configuration it keeps telling me that an error has occurred and that I should try again.

    I reset modem and router.  Still have the same issue.  I have a laptop connected to the network as well as a PS3.  Both are working great.  Did a Speedtest app test on iphone.  With 3g it was working good.  When i switched to wifi, it was trying to get the ping test accomplished, and could not.  it was stuck in the ping test at 0% for a long time and never progress. 

  • Hello to everyone!! I have a huge problem and I feel very angry grrrrr!!! My iPhone 4s has iOs 6.0.1 and my wifi doesn't work at all please dear apple do sth!!! help me!!!!!!

    Hello to everyone!! I have a huge problem and I feel very angry grrrrr!!! My iPhone 4s has iOs 6.0.1 and my wifi doesn't work at all please dear apple do sth!!! help me!!!!!!

    Κανε backup στο iTunes και μετά κάνε restore as new. Δηλαδή Settings>General>Reset>Reset all Content and Settings. Οταν τελειώσει θα έχουν σβηστεί όλα. Μην κανεις restore from backup. Δοκίμασε πρώτα νε δεις αν δουλεύει το wi-fi. Αν δεν δουλεύει πας στο service. Αν δουλεύει κάνε restore from backup. Αν το πρόβλημα ξαναεμφανιστεί τότε πρέπει να ξανακανεις restore as new και να το στησεις απο την αρχή. Αν δεν εμφανιστεί έχεις καθαρίσει. Μην ξεχάσεις να συγχρονίζεις επαφές και ημερολόγια πριν το restore.

  • WiFi doesn't work after repair

    Hi,
    Today I received my iMac 27" back from repair. It had the screen and the optical drive replaced since both were defect.
    According to the papers, nothing else has been replaced, but WiFi doesn't work now. I can't connect to my own network (Time Capsule), and only very few networks show up in the list -- quite often, mine is not there, and sometimes there are none at all. Checking with a laptop right next to the iMac, I can see plenty of networks (and my own network works fine).
    Could the Apple guys accidentally have screwed up something? I thought about looking at the antenna connectors on the AirPort card (a guide is available on iFixIt), but it seems quite complicated (and I don't have the necessary screwdrivers).
    Thanks,
    Michael

    And if it under warranty you do not want to open it up and void your warranty.
    When the authorized tech installed new memory modules in my 09 Mac mini, he shorted out my wireless card and they had to order a new one and install it. I would take it back and have them figure out what is wrong.

Maybe you are looking for

  • ICal very slow feature on iPod - Why???

    Been having problems with my Palm device (it's old... maybe time to update). I thought since I almost always have my ipod with me that I would sync my iCal and Address book to it. iPod won't do what the Palm will but at least have my current appointm

  • [CS2/CS3 JS] Finding the first character of each paragraph

    Hi, Can anybody help with my script below: for (h=0; myParaCount>h; h++){ myChars = myStory.paragraphs.item(h).contents; if (myChars.characters.item(0) == "l" && myChars.characters.item(0).appliedCharacterStyle == CharStyleWin){ myStory.paragraphs.it

  • Viewing Other Schema In SQL Developer

    Hi, I did a search in the Forum and none of the posts I have found has been able to solve my problem so I'm here with my hat in hand asking for some advice. I was recently given SQL Developer to replace what I had been using and, on my own, have been

  • SMT1 creating trusted system error No authorization for object S_ADMI_FCD

    SMT1 creating trusted system gives error No authorization for object S_ADMI_FCD even after giving authorizations in both the system. Was not able find the issue by debugging. Thanks and appreciate your response. Betcy Moderator message: not directly

  • Plsql Programming Guidelines within a RAC Environment

    Hi Guys, Are there any specific guidelines you would recommend for programming within a RAC environment, in addition to the usual best practices one would adopt for writing Plsql programs? ie guidelines that would take advantage of the performance bo