5ghz Wireless Speed Drops Occasionally

Hi,
I currently have BT Infinity 2 with an average of 74mb download speed, however after a few days the 5Ghz wi-fi speed drops to around 25mb (speed still at 74mb via ethernet cable) and after restarting the Home Hub 5, the 5Ghz wi-fi speed goes back to 74mb for a few days then it drops again and I have to restart the router again.
Is this normal or could it be wifi interference as there are lots of wifi spots around the building. It does not affect the 2.4Ghz band and a download speed of 74mb is only possible when connected using a 5Ghz band.
Thank you.
Ad1981

I would try changing the wireless channel:
http://bt.custhelp.com/app/answers/detail/a_id/14094/~/how-do-i-change-the-wireless-channel-on-my-bt...
Hope this helps
If my post has been useful, please click on the Ratings star on the left-hand side of the post.

Similar Messages

  • Wireless speed dropping to 5.5Mbps

    Hi Folks,
    I like the ArchLinux distribution and have enjoyed it for a few years now.
    But recently I noticed my wifi speed dropping like crazy, I reinstalled my router (DD-WRT) but that didn't fix anything.
    So I tried something else, I booted to Windows and I found that I had normal speeds (54Mbps) during the span of an hour.
    Afterwards I rebooted back to linux, and the speed immediately dropped to 5.5Mbps
    This started about 1 or 2 weeks back, I'm guessing after some pacman update..
    Are there any regression or new bugs known which affect my performance?
    lspci:
    00:00.0 Host bridge: Intel Corporation Mobile PM965/GM965/GL960 Memory Controller Hub (rev 0c)
    00:02.0 VGA compatible controller: Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller (primary) (rev 0c)
    00:02.1 Display controller: Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller (secondary) (rev 0c)
    00:1a.0 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #4 (rev 03)
    00:1a.1 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #5 (rev 03)
    00:1a.7 USB Controller: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #2 (rev 03)
    00:1b.0 Audio device: Intel Corporation 82801H (ICH8 Family) HD Audio Controller (rev 03)
    00:1c.0 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 1 (rev 03)
    00:1c.1 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 2 (rev 03)
    00:1c.2 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 3 (rev 03)
    00:1c.4 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 5 (rev 03)
    00:1d.0 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #1 (rev 03)
    00:1d.1 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #2 (rev 03)
    00:1d.2 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #3 (rev 03)
    00:1d.7 USB Controller: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #1 (rev 03)
    00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev f3)
    00:1f.0 ISA bridge: Intel Corporation 82801HEM (ICH8M) LPC Interface Controller (rev 03)
    00:1f.1 IDE interface: Intel Corporation 82801HBM/HEM (ICH8M/ICH8M-E) IDE Controller (rev 03)
    00:1f.2 SATA controller: Intel Corporation 82801HBM/HEM (ICH8M/ICH8M-E) SATA AHCI Controller (rev 03)
    02:04.0 CardBus bridge: Ricoh Co Ltd RL5c476 II (rev b6)
    02:04.1 FireWire (IEEE 1394): Ricoh Co Ltd R5C832 IEEE 1394 Controller (rev 02)
    10:00.0 Network controller: Intel Corporation PRO/Wireless 3945ABG [Golan] Network Connection (rev 02)
    18:00.0 Ethernet controller: Broadcom Corporation NetLink BCM5787M Gigabit Ethernet PCI Express (rev 02)
    lsmod | grep iw :
    iwl3945 66405 0
    iwl_legacy 45666 1 iwl3945
    mac80211 189758 2 iwl3945,iwl_legacy
    cfg80211 126962 3 iwl3945,iwl_legacy,mac80211
    lsmod:
    Module Size Used by
    cryptd 6901 0
    aes_i586 6948 1
    aes_generic 25678 1 aes_i586
    coretemp 4374 0
    btusb 9897 0
    bluetooth 115465 1 btusb
    arc4 1094 2
    ecb 1645 2
    iwl3945 66405 0
    i915 557262 3
    snd_hda_codec_analog 62068 1
    iwl_legacy 45666 1 iwl3945
    snd_hda_intel 19261 3
    snd_hda_codec 66793 2 snd_hda_codec_analog,snd_hda_intel
    mac80211 189758 2 iwl3945,iwl_legacy
    drm_kms_helper 24245 1 i915
    snd_hwdep 4919 1 snd_hda_codec
    pcmcia 31566 0
    drm 147653 4 i915,drm_kms_helper
    snd_pcm 60311 2 snd_hda_intel,snd_hda_codec
    joydev 7535 0
    tpm_infineon 6770 0
    cfg80211 126962 3 iwl3945,iwl_legacy,mac80211
    psmouse 55927 0
    sg 21022 0
    uhci_hcd 19344 0
    intel_agp 8664 1 i915
    ehci_hcd 34847 0
    ppdev 4822 0
    firewire_ohci 25683 0
    snd_timer 15542 1 snd_pcm
    tg3 113936 0
    i2c_algo_bit 4431 1 i915
    parport_pc 27902 0
    firewire_core 43390 1 firewire_ohci
    iTCO_wdt 10333 0
    snd 43527 12 snd_hda_codec_analog,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_timer
    intel_gtt 11417 3 i915,intel_agp
    usbcore 119004 4 btusb,uhci_hcd,ehci_hcd
    parport 26107 2 ppdev,parport_pc
    agpgart 22160 3 drm,intel_agp,intel_gtt
    yenta_socket 18846 0
    soundcore 5018 1 snd
    snd_page_alloc 5909 2 snd_hda_intel,snd_pcm
    crc_itu_t 1077 1 firewire_core
    evdev 7310 13
    i2c_core 16665 4 i915,drm_kms_helper,drm,i2c_algo_bit
    pcmcia_rsrc 8816 1 yenta_socket
    iTCO_vendor_support 1553 1 iTCO_wdt
    pcmcia_core 10154 3 pcmcia,yenta_socket,pcmcia_rsrc
    libphy 14053 1 tg3
    hp_accel 12892 0
    lis3lv02d 8712 1 hp_accel
    serio_raw 3430 0
    pcspkr 1415 0
    thermal 6603 0
    hp_wmi 6602 0
    container 1937 0
    input_polldev 2446 1 lis3lv02d
    sparse_keymap 2636 1 hp_wmi
    fan 1910 0
    rfkill 12510 3 bluetooth,cfg80211,hp_wmi
    tpm_tis 6389 0
    tpm 10037 2 tpm_infineon,tpm_tis
    tpm_bios 4237 1 tpm
    video 9852 1 i915
    wmi 7367 1 hp_wmi
    battery 8905 0
    ac 2545 0
    button 3654 1 i915
    cpufreq_powersave 714 0
    cpufreq_conservative 4325 2
    cpufreq_ondemand 5064 0
    acpi_cpufreq 5053 1
    freq_table 2055 2 cpufreq_ondemand,acpi_cpufreq
    processor 21884 3 acpi_cpufreq
    mperf 1035 1 acpi_cpufreq
    vboxdrv 177483 0
    fuse 58669 3
    ext4 334626 3
    mbcache 4321 1 ext4
    jbd2 59098 1 ext4
    crc16 1077 2 bluetooth,ext4
    sd_mod 25515 5
    sr_mod 12956 0
    cdrom 31341 1 sr_mod
    ahci 18093 5
    pata_acpi 2396 0
    libahci 16581 1 ahci
    ata_piix 18569 0
    libata 154349 4 ahci,pata_acpi,libahci,ata_piix
    scsi_mod 110670 4 sg,sd_mod,sr_mod,libata
    dmesg:
    [ 0.000000] Initializing cgroup subsys cpuset
    [ 0.000000] Initializing cgroup subsys cpu
    [ 0.000000] Linux version 2.6.39-ARCH (tobias@T-POWA-LX) (gcc version 4.6.0 20110603 (prerelease) (GCC) ) #1 SMP PREEMPT Tue Jun 7 05:49:02 UTC 2011
    [ 0.000000] BIOS-provided physical RAM map:
    [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
    [ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
    [ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
    [ 0.000000] BIOS-e820: 0000000000100000 - 00000000bf7b0000 (usable)
    [ 0.000000] BIOS-e820: 00000000bf7b0000 - 00000000bf7c5400 (reserved)
    [ 0.000000] BIOS-e820: 00000000bf7c5400 - 00000000bf7e7fb8 (ACPI NVS)
    [ 0.000000] BIOS-e820: 00000000bf7e7fb8 - 00000000c0000000 (reserved)
    [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
    [ 0.000000] BIOS-e820: 00000000fed20000 - 00000000fed9a000 (reserved)
    [ 0.000000] BIOS-e820: 00000000feda0000 - 00000000fedc0000 (reserved)
    [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
    [ 0.000000] BIOS-e820: 00000000ffb00000 - 00000000ffc00000 (reserved)
    [ 0.000000] BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
    [ 0.000000] Notice: NX (Execute Disable) protection cannot be enabled: non-PAE kernel!
    [ 0.000000] DMI 2.4 present.
    [ 0.000000] DMI: Hewlett-Packard HP Compaq 6710b (GR680ET#ABH)/30C0, BIOS 68DDU Ver. F.10 01/11/2008
    [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
    [ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
    [ 0.000000] last_pfn = 0xbf7b0 max_arch_pfn = 0x100000
    [ 0.000000] MTRR default type: uncachable
    [ 0.000000] MTRR fixed ranges enabled:
    [ 0.000000] 00000-9FFFF write-back
    [ 0.000000] A0000-BFFFF uncachable
    [ 0.000000] C0000-CFFFF write-protect
    [ 0.000000] D0000-EFFFF uncachable
    [ 0.000000] F0000-FFFFF write-protect
    [ 0.000000] MTRR variable ranges enabled:
    [ 0.000000] 0 base 000000000 mask F80000000 write-back
    [ 0.000000] 1 base 080000000 mask FC0000000 write-back
    [ 0.000000] 2 base 0BF800000 mask FFF800000 uncachable
    [ 0.000000] 3 base 0FEDA0000 mask FFFFE0000 uncachable
    [ 0.000000] 4 disabled
    [ 0.000000] 5 disabled
    [ 0.000000] 6 disabled
    [ 0.000000] 7 disabled
    [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
    [ 0.000000] initial memory mapped : 0 - 01c00000
    [ 0.000000] Base memory trampoline at [c009b000] 9b000 size 16384
    [ 0.000000] init_memory_mapping: 0000000000000000-00000000377fe000
    [ 0.000000] 0000000000 - 0000400000 page 4k
    [ 0.000000] 0000400000 - 0037400000 page 2M
    [ 0.000000] 0037400000 - 00377fe000 page 4k
    [ 0.000000] kernel direct mapping tables up to 377fe000 @ 1bfb000-1c00000
    [ 0.000000] RAMDISK: 7fe38000 - 7fff0000
    [ 0.000000] Allocated new RAMDISK: 37646000 - 377fd9b5
    [ 0.000000] Move RAMDISK from 000000007fe38000 - 000000007ffef9b4 to 37646000 - 377fd9b4
    [ 0.000000] ACPI: RSDP 000f7150 00024 (v02 HP )
    [ 0.000000] ACPI: XSDT bf7c81cc 00084 (v01 HPQOEM SLIC-MPC 00000001 HP 00000001)
    [ 0.000000] ACPI: FACP bf7c8084 000F4 (v04 HP 30C0 00000003 HP 00000001)
    [ 0.000000] ACPI: DSDT bf7c84d8 1313E (v01 HP nc75xx 00010000 MSFT 03000001)
    [ 0.000000] ACPI: FACS bf7e7d80 00040
    [ 0.000000] ACPI: SLIC bf7c8250 00176 (v01 HPQOEM SLIC-MPC 00000001 HP 00000001)
    [ 0.000000] ACPI: HPET bf7c83c8 00038 (v01 HP 30C0 00000001 HP 00000001)
    [ 0.000000] ACPI: APIC bf7c8400 00068 (v01 HP 30C0 00000001 HP 00000001)
    [ 0.000000] ACPI: MCFG bf7c8468 0003C (v01 HP 30C0 00000001 HP 00000001)
    [ 0.000000] ACPI: TCPA bf7c84a4 00032 (v02 HP 30C0 00000001 HP 00000001)
    [ 0.000000] ACPI: SSDT bf7db616 00059 (v01 HP HPQNLP 00000001 MSFT 03000001)
    [ 0.000000] ACPI: SSDT bf7db66f 00328 (v01 HP HPQSAT 00000001 MSFT 03000001)
    [ 0.000000] ACPI: SSDT bf7db997 0017D (v01 HP HPQMRM 00000001 MSFT 03000001)
    [ 0.000000] ACPI: SSDT bf7dc4da 0025F (v01 HP Cpu0Tst 00003000 INTL 20060317)
    [ 0.000000] ACPI: SSDT bf7dc739 000A6 (v01 HP Cpu1Tst 00003000 INTL 20060317)
    [ 0.000000] ACPI: SSDT bf7dc7df 004D7 (v01 HP CpuPm 00003000 INTL 20060317)
    [ 0.000000] ACPI: Local APIC address 0xfee00000
    [ 0.000000] 2175MB HIGHMEM available.
    [ 0.000000] 887MB LOWMEM available.
    [ 0.000000] mapped low ram: 0 - 377fe000
    [ 0.000000] low ram: 0 - 377fe000
    [ 0.000000] Zone PFN ranges:
    [ 0.000000] DMA 0x00000010 -> 0x00001000
    [ 0.000000] Normal 0x00001000 -> 0x000377fe
    [ 0.000000] HighMem 0x000377fe -> 0x000bf7b0
    [ 0.000000] Movable zone start PFN for each node
    [ 0.000000] early_node_map[2] active PFN ranges
    [ 0.000000] 0: 0x00000010 -> 0x0000009f
    [ 0.000000] 0: 0x00000100 -> 0x000bf7b0
    [ 0.000000] On node 0 totalpages: 784191
    [ 0.000000] free_area_init_node: node 0, pgdat c14a3980, node_mem_map f5e55200
    [ 0.000000] DMA zone: 32 pages used for memmap
    [ 0.000000] DMA zone: 0 pages reserved
    [ 0.000000] DMA zone: 3951 pages, LIFO batch:0
    [ 0.000000] Normal zone: 1744 pages used for memmap
    [ 0.000000] Normal zone: 221486 pages, LIFO batch:31
    [ 0.000000] HighMem zone: 4352 pages used for memmap
    [ 0.000000] HighMem zone: 552626 pages, LIFO batch:31
    [ 0.000000] Using APIC driver default
    [ 0.000000] ACPI: PM-Timer IO Port: 0x1008
    [ 0.000000] ACPI: Local APIC address 0xfee00000
    [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
    [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
    [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
    [ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
    [ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
    [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
    [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
    [ 0.000000] ACPI: IRQ0 used by override.
    [ 0.000000] ACPI: IRQ2 used by override.
    [ 0.000000] ACPI: IRQ9 used by override.
    [ 0.000000] Using ACPI (MADT) for SMP configuration information
    [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
    [ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
    [ 0.000000] nr_irqs_gsi: 40
    [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
    [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
    [ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
    [ 0.000000] Allocating PCI resources starting at c0000000 (gap: c0000000:3ec00000)
    [ 0.000000] Booting paravirtualized kernel on bare hardware
    [ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1
    [ 0.000000] PERCPU: Embedded 12 pages/cpu @f5800000 s27648 r0 d21504 u2097152
    [ 0.000000] pcpu-alloc: s27648 r0 d21504 u2097152 alloc=1*4194304
    [ 0.000000] pcpu-alloc: [0] 0 1
    [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 778063
    [ 0.000000] Kernel command line: root=/dev/disk/by-uuid/d923fdbe-d6a8-4d2b-ab88-c36fcf8609bd resume=/dev/disk/by-uuid/1bdc571f-0c58-4972-91ba-3dddae8434d6 ro i915.modeset=1
    [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
    [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
    [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
    [ 0.000000] Initializing CPU#0
    [ 0.000000] allocated 12548608 bytes of page_cgroup
    [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
    [ 0.000000] Initializing HighMem for node 0 (000377fe:000bf7b0)
    [ 0.000000] Memory: 3091000k/3137216k available (3380k kernel code, 45764k reserved, 1394k data, 524k init, 2227912k highmem)
    [ 0.000000] virtual kernel memory layout:
    [ 0.000000] fixmap : 0xfff16000 - 0xfffff000 ( 932 kB)
    [ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
    [ 0.000000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB)
    [ 0.000000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB)
    [ 0.000000] .init : 0xc14aa000 - 0xc152d000 ( 524 kB)
    [ 0.000000] .data : 0xc134d1bf - 0xc14a9c00 (1394 kB)
    [ 0.000000] .text : 0xc1000000 - 0xc134d1bf (3380 kB)
    [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
    [ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
    [ 0.000000] Preemptable hierarchical RCU implementation.
    [ 0.000000] RCU-based detection of stalled CPUs is disabled.
    [ 0.000000] Verbose stalled-CPUs detection is disabled.
    [ 0.000000] NR_IRQS:512
    [ 0.000000] CPU 0 irqstacks, hard=f480c000 soft=f480e000
    [ 0.000000] Extended CMOS year: 2000
    [ 0.000000] Console: colour VGA+ 80x25
    [ 0.000000] console [tty0] enabled
    [ 0.000000] hpet clockevent registered
    [ 0.000000] Fast TSC calibration using PIT
    [ 0.000000] Detected 1995.171 MHz processor.
    [ 0.003336] Calibrating delay loop (skipped), value calculated using timer frequency.. 3991.60 BogoMIPS (lpj=6650570)
    [ 0.003456] pid_max: default: 32768 minimum: 301
    [ 0.003553] Security Framework initialized
    [ 0.003616] AppArmor: AppArmor disabled by boot time parameter
    [ 0.003695] Mount-cache hash table entries: 512
    [ 0.003948] Initializing cgroup subsys ns
    [ 0.006672] ns_cgroup deprecated: consider using the 'clone_children' flag without the ns_cgroup.
    [ 0.006747] Initializing cgroup subsys cpuacct
    [ 0.006816] Initializing cgroup subsys memory
    [ 0.006883] Initializing cgroup subsys devices
    [ 0.006942] Initializing cgroup subsys freezer
    [ 0.007001] Initializing cgroup subsys net_cls
    [ 0.007060] Initializing cgroup subsys blkio
    [ 0.007154] CPU: Physical Processor ID: 0
    [ 0.007213] CPU: Processor Core ID: 0
    [ 0.007272] mce: CPU supports 6 MCE banks
    [ 0.007335] CPU0: Thermal monitoring handled by SMI
    [ 0.007339] using mwait in idle threads.
    [ 0.008424] ACPI: Core revision 20110316
    [ 0.016678] ftrace: allocating 15225 entries in 30 pages
    [ 0.020043] Enabling APIC mode: Flat. Using 1 I/O APICs
    [ 0.020444] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
    [ 0.056096] CPU0: Intel(R) Core(TM)2 Duo CPU T7250 @ 2.00GHz stepping 0d
    [ 0.056663] Performance Events: PEBS fmt0+, Core2 events, Intel PMU driver.
    [ 0.056663] PEBS disabled due to CPU errata.
    [ 0.056663] ... version: 2
    [ 0.056663] ... bit width: 40
    [ 0.056663] ... generic registers: 2
    [ 0.056663] ... value mask: 000000ffffffffff
    [ 0.056663] ... max period: 000000007fffffff
    [ 0.056663] ... fixed-purpose events: 3
    [ 0.056663] ... event mask: 0000000700000003
    [ 0.073434] NMI watchdog enabled, takes one hw-pmu counter.
    [ 0.100007] CPU 1 irqstacks, hard=f48c8000 soft=f48ca000
    [ 0.100009] Booting Node 0, Processors #1 Ok.
    [ 0.100111] smpboot cpu 1: start_ip = 9b000
    [ 0.006666] Initializing CPU#1
    [ 0.006666] CPU1: Thermal monitoring handled by SMI
    [ 0.196682] NMI watchdog enabled, takes one hw-pmu counter.
    [ 0.203325] Brought up 2 CPUs
    [ 0.203383] Total of 2 processors activated (7983.85 BogoMIPS).
    [ 0.204342] devtmpfs: initialized
    [ 0.204342] PM: Registering ACPI NVS region at bf7c5400 (142264 bytes)
    [ 0.204342] HP Compaq Laptop series board detected. Selecting BIOS-method for reboots.
    [ 0.204576] print_constraints: dummy:
    [ 0.204692] NET: Registered protocol family 16
    [ 0.204864] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
    [ 0.204937] ACPI: bus type pci registered
    [ 0.205089] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
    [ 0.205165] PCI: not using MMCONFIG
    [ 0.207646] PCI: PCI BIOS revision 2.10 entry at 0xf0322, last bus=40
    [ 0.207708] PCI: Using configuration type 1 for base access
    [ 0.208277] bio: create slab <bio-0> at 0
    [ 0.210299] ACPI: EC: Look up EC in DSDT
    [ 0.253363] ACPI: SSDT bf7dbbdc 0027F (v01 HP Cpu0Ist 00003000 INTL 20060317)
    [ 0.253972] ACPI: Dynamic OEM Table Load:
    [ 0.254117] ACPI: SSDT (null) 0027F (v01 HP Cpu0Ist 00003000 INTL 20060317)
    [ 0.254418] ACPI: SSDT bf7dbee0 005FA (v01 HP Cpu0Cst 00003001 INTL 20060317)
    [ 0.255665] ACPI: Dynamic OEM Table Load:
    [ 0.255810] ACPI: SSDT (null) 005FA (v01 HP Cpu0Cst 00003001 INTL 20060317)
    [ 0.256209] ACPI: SSDT bf7dbb14 000C8 (v01 HP Cpu1Ist 00003000 INTL 20060317)
    [ 0.256814] ACPI: Dynamic OEM Table Load:
    [ 0.256959] ACPI: SSDT (null) 000C8 (v01 HP Cpu1Ist 00003000 INTL 20060317)
    [ 0.257214] ACPI: SSDT bf7dbe5b 00085 (v01 HP Cpu1Cst 00003000 INTL 20060317)
    [ 0.257803] ACPI: Dynamic OEM Table Load:
    [ 0.257949] ACPI: SSDT (null) 00085 (v01 HP Cpu1Cst 00003000 INTL 20060317)
    [ 0.290050] ACPI: Interpreter enabled
    [ 0.290115] ACPI: (supports S0 S3 S4 S5)
    [ 0.290361] ACPI: Using IOAPIC for interrupt routing
    [ 0.290441] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
    [ 0.291123] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in ACPI motherboard resources
    [ 0.291198] PCI: Using MMCONFIG for extended config space
    [ 0.294937] ACPI: Power Resource [C27F] (on)
    [ 0.295774] ACPI: Power Resource [C29B] (on)
    [ 0.299470] ACPI: Power Resource [C1C5] (off)
    [ 0.301813] ACPI: Power Resource [C3BC] (off)
    [ 0.301942] ACPI: Power Resource [C3BD] (off)
    [ 0.302067] ACPI: Power Resource [C3BE] (off)
    [ 0.302193] ACPI: Power Resource [C3BF] (off)
    [ 0.302318] ACPI: Power Resource [C3C0] (off)
    [ 0.303130] ACPI: EC: GPE = 0x16, I/O: command/status = 0x66, data = 0x62
    [ 0.303481] ACPI: No dock devices found.
    [ 0.303540] HEST: Table not found.
    [ 0.303600] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
    [ 0.306875] ACPI: PCI Root Bridge [C003] (domain 0000 [bus 00-ff])
    [ 0.313394] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7]
    [ 0.313457] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff]
    [ 0.313520] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
    [ 0.313593] pci_root PNP0A08:00: host bridge window [mem 0xbf800000-0xfedfffff]
    [ 0.313666] pci_root PNP0A08:00: host bridge window [mem 0xfee01000-0xffffffff]
    [ 0.313739] pci_root PNP0A08:00: host bridge window [mem 0x000d0000-0x000dffff]
    [ 0.313824] pci 0000:00:00.0: [8086:2a00] type 0 class 0x000600
    [ 0.313871] pci 0000:00:02.0: [8086:2a02] type 0 class 0x000300
    [ 0.313886] pci 0000:00:02.0: reg 10: [mem 0xe4600000-0xe46fffff 64bit]
    [ 0.313896] pci 0000:00:02.0: reg 18: [mem 0xd0000000-0xdfffffff 64bit pref]
    [ 0.313903] pci 0000:00:02.0: reg 20: [io 0x4000-0x4007]
    [ 0.313938] pci 0000:00:02.1: [8086:2a03] type 0 class 0x000380
    [ 0.313951] pci 0000:00:02.1: reg 10: [mem 0xe4700000-0xe47fffff 64bit]
    [ 0.314042] pci 0000:00:1a.0: [8086:2834] type 0 class 0x000c03
    [ 0.314102] pci 0000:00:1a.0: reg 20: [io 0x4020-0x403f]
    [ 0.314144] pci 0000:00:1a.1: [8086:2835] type 0 class 0x000c03
    [ 0.314204] pci 0000:00:1a.1: reg 20: [io 0x4040-0x405f]
    [ 0.314261] pci 0000:00:1a.7: [8086:283a] type 0 class 0x000c03
    [ 0.314287] pci 0000:00:1a.7: reg 10: [mem 0xe4800000-0xe48003ff]
    [ 0.314382] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
    [ 0.314388] pci 0000:00:1a.7: PME# disabled
    [ 0.314418] pci 0000:00:1b.0: [8086:284b] type 0 class 0x000403
    [ 0.314442] pci 0000:00:1b.0: reg 10: [mem 0xe4804000-0xe4807fff 64bit]
    [ 0.314531] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
    [ 0.314536] pci 0000:00:1b.0: PME# disabled
    [ 0.314566] pci 0000:00:1c.0: [8086:283f] type 1 class 0x000604
    [ 0.314655] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
    [ 0.314660] pci 0000:00:1c.0: PME# disabled
    [ 0.314693] pci 0000:00:1c.1: [8086:2841] type 1 class 0x000604
    [ 0.314785] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
    [ 0.314790] pci 0000:00:1c.1: PME# disabled
    [ 0.314823] pci 0000:00:1c.2: [8086:2843] type 1 class 0x000604
    [ 0.314915] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
    [ 0.314920] pci 0000:00:1c.2: PME# disabled
    [ 0.314954] pci 0000:00:1c.4: [8086:2847] type 1 class 0x000604
    [ 0.315045] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
    [ 0.315050] pci 0000:00:1c.4: PME# disabled
    [ 0.315083] pci 0000:00:1d.0: [8086:2830] type 0 class 0x000c03
    [ 0.315143] pci 0000:00:1d.0: reg 20: [io 0x4060-0x407f]
    [ 0.315185] pci 0000:00:1d.1: [8086:2831] type 0 class 0x000c03
    [ 0.315244] pci 0000:00:1d.1: reg 20: [io 0x4080-0x409f]
    [ 0.315286] pci 0000:00:1d.2: [8086:2832] type 0 class 0x000c03
    [ 0.315345] pci 0000:00:1d.2: reg 20: [io 0x40a0-0x40bf]
    [ 0.315401] pci 0000:00:1d.7: [8086:2836] type 0 class 0x000c03
    [ 0.315427] pci 0000:00:1d.7: reg 10: [mem 0xe4808000-0xe48083ff]
    [ 0.315521] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
    [ 0.315527] pci 0000:00:1d.7: PME# disabled
    [ 0.315554] pci 0000:00:1e.0: [8086:2448] type 1 class 0x000604
    [ 0.315645] pci 0000:00:1f.0: [8086:2815] type 0 class 0x000601
    [ 0.315763] pci 0000:00:1f.0: quirk: [io 0x1000-0x107f] claimed by ICH6 ACPI/GPIO/TCO
    [ 0.315841] pci 0000:00:1f.0: quirk: [io 0x1100-0x113f] claimed by ICH6 GPIO
    [ 0.315907] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0500 (mask 007f)
    [ 0.315986] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 4 PIO at 02e8 (mask 0007)
    [ 0.316100] pci 0000:00:1f.1: [8086:2850] type 0 class 0x000101
    [ 0.316118] pci 0000:00:1f.1: reg 10: [io 0x0000-0x0007]
    [ 0.316131] pci 0000:00:1f.1: reg 14: [io 0x0000-0x0003]
    [ 0.316144] pci 0000:00:1f.1: reg 18: [io 0x0000-0x0007]
    [ 0.316157] pci 0000:00:1f.1: reg 1c: [io 0x0000-0x0003]
    [ 0.316170] pci 0000:00:1f.1: reg 20: [io 0x40c0-0x40cf]
    [ 0.316225] pci 0000:00:1f.2: [8086:2829] type 0 class 0x000106
    [ 0.316253] pci 0000:00:1f.2: reg 10: [io 0x13f0-0x13f7]
    [ 0.316266] pci 0000:00:1f.2: reg 14: [io 0x15f4-0x15f7]
    [ 0.316279] pci 0000:00:1f.2: reg 18: [io 0x1370-0x1377]
    [ 0.316292] pci 0000:00:1f.2: reg 1c: [io 0x1574-0x1577]
    [ 0.316304] pci 0000:00:1f.2: reg 20: [io 0x4100-0x411f]
    [ 0.316317] pci 0000:00:1f.2: reg 24: [mem 0xe4809000-0xe48097ff]
    [ 0.316368] pci 0000:00:1f.2: PME# supported from D3hot
    [ 0.316373] pci 0000:00:1f.2: PME# disabled
    [ 0.316459] pci 0000:00:1c.0: PCI bridge to [bus 08-08]
    [ 0.316523] pci 0000:00:1c.0: bridge window [io 0xf000-0x0000] (disabled)
    [ 0.316529] pci 0000:00:1c.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
    [ 0.316538] pci 0000:00:1c.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
    [ 0.316706] pci 0000:10:00.0: [8086:4222] type 0 class 0x000280
    [ 0.316763] pci 0000:10:00.0: reg 10: [mem 0xe4100000-0xe4100fff]
    [ 0.317108] pci 0000:10:00.0: PME# supported from D0 D3hot D3cold
    [ 0.317121] pci 0000:10:00.0: PME# disabled
    [ 0.317225] pci 0000:00:1c.1: PCI bridge to [bus 10-10]
    [ 0.317289] pci 0000:00:1c.1: bridge window [io 0xf000-0x0000] (disabled)
    [ 0.317295] pci 0000:00:1c.1: bridge window [mem 0xe4100000-0xe41fffff]
    [ 0.317303] pci 0000:00:1c.1: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
    [ 0.317441] pci 0000:18:00.0: [14e4:1693] type 0 class 0x000200
    [ 0.317474] pci 0000:18:00.0: reg 10: [mem 0xe4000000-0xe400ffff 64bit]
    [ 0.317618] pci 0000:18:00.0: PME# supported from D3hot D3cold
    [ 0.317624] pci 0000:18:00.0: PME# disabled
    [ 0.317669] pci 0000:00:1c.2: PCI bridge to [bus 18-18]
    [ 0.317733] pci 0000:00:1c.2: bridge window [io 0xf000-0x0000] (disabled)
    [ 0.317739] pci 0000:00:1c.2: bridge window [mem 0xe4000000-0xe40fffff]
    [ 0.317747] pci 0000:00:1c.2: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
    [ 0.317813] pci 0000:00:1c.4: PCI bridge to [bus 28-28]
    [ 0.317876] pci 0000:00:1c.4: bridge window [io 0x2000-0x3fff]
    [ 0.317882] pci 0000:00:1c.4: bridge window [mem 0xe0000000-0xe3ffffff]
    [ 0.317890] pci 0000:00:1c.4: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
    [ 0.317950] pci 0000:02:04.0: [1180:0476] type 2 class 0x000607
    [ 0.317980] pci 0000:02:04.0: reg 10: [mem 0xe4200000-0xe4200fff]
    [ 0.318011] pci 0000:02:04.0: supports D1 D2
    [ 0.318014] pci 0000:02:04.0: PME# supported from D0 D1 D2 D3hot D3cold
    [ 0.318020] pci 0000:02:04.0: PME# disabled
    [ 0.318049] pci 0000:02:04.1: [1180:0832] type 0 class 0x000c00
    [ 0.318077] pci 0000:02:04.1: reg 10: [mem 0xe4201000-0xe42017ff]
    [ 0.318189] pci 0000:02:04.1: supports D1 D2
    [ 0.318191] pci 0000:02:04.1: PME# supported from D0 D1 D2 D3hot D3cold
    [ 0.318197] pci 0000:02:04.1: PME# disabled
    [ 0.318276] pci 0000:00:1e.0: PCI bridge to [bus 02-03] (subtractive decode)
    [ 0.318342] pci 0000:00:1e.0: bridge window [io 0xf000-0x0000] (disabled)
    [ 0.318348] pci 0000:00:1e.0: bridge window [mem 0xe4200000-0xe45fffff]
    [ 0.318357] pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
    [ 0.318360] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
    [ 0.318362] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
    [ 0.318365] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
    [ 0.318368] pci 0000:00:1e.0: bridge window [mem 0xbf800000-0xfedfffff] (subtractive decode)
    [ 0.318371] pci 0000:00:1e.0: bridge window [mem 0xfee01000-0xffffffff] (subtractive decode)
    [ 0.318373] pci 0000:00:1e.0: bridge window [mem 0x000d0000-0x000dffff] (subtractive decode)
    [ 0.318431] pci_bus 0000:03: [bus 03-06] partially hidden behind transparent bridge 0000:02 [bus 02-03]
    [ 0.318540] pci_bus 0000:00: on NUMA node 0
    [ 0.318544] ACPI: PCI Interrupt Routing Table [\_SB_.C003._PRT]
    [ 0.318789] ACPI: PCI Interrupt Routing Table [\_SB_.C003.C0B0._PRT]
    [ 0.318876] ACPI: PCI Interrupt Routing Table [\_SB_.C003.C11D._PRT]
    [ 0.318931] ACPI: PCI Interrupt Routing Table [\_SB_.C003.C131._PRT]
    [ 0.318991] ACPI: PCI Interrupt Routing Table [\_SB_.C003.C132._PRT]
    [ 0.319052] ACPI: PCI Interrupt Routing Table [\_SB_.C003.C134._PRT]
    [ 0.319149] pci0000:00: Requesting ACPI _OSC control (0x1d)
    [ 0.319210] Unable to assume _OSC PCIe control. Disabling ASPM
    [ 0.337338] ACPI: PCI Interrupt Link [C12D] (IRQs 10 11) *5
    [ 0.337702] ACPI: PCI Interrupt Link [C12E] (IRQs *10 11)
    [ 0.338019] ACPI: PCI Interrupt Link [C12F] (IRQs 10 *11)
    [ 0.338329] ACPI: PCI Interrupt Link [C130] (IRQs 10 11) *0, disabled.
    [ 0.338733] ACPI: PCI Interrupt Link [C140] (IRQs *10 11)
    [ 0.339050] ACPI: PCI Interrupt Link [C141] (IRQs *10 11)
    [ 0.339358] ACPI: PCI Interrupt Link [C142] (IRQs 10 11) *0, disabled.
    [ 0.339713] ACPI Exception: AE_NOT_FOUND, Evaluating _PRS (20110316/pci_link-184)
    [ 0.339986] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
    [ 0.340072] vgaarb: loaded
    [ 0.340231] PCI: Using ACPI for IRQ routing
    [ 0.341816] PCI: pci_cache_line_size set to 64 bytes
    [ 0.341936] Expanded resource reserved due to conflict with PCI Bus 0000:00
    [ 0.342000] reserve RAM buffer: 000000000009fc00 - 000000000009ffff
    [ 0.342003] reserve RAM buffer: 00000000bf7b0000 - 00000000bfffffff
    [ 0.342124] NetLabel: Initializing
    [ 0.342182] NetLabel: domain hash size = 128
    [ 0.342241] NetLabel: protocols = UNLABELED CIPSOv4
    [ 0.342313] NetLabel: unlabeled traffic allowed by default
    [ 0.342386] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
    [ 0.342454] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
    [ 0.342687] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
    [ 0.359996] Switching to clocksource hpet
    [ 0.363130] Switched to NOHz mode on CPU #0
    [ 0.363227] Switched to NOHz mode on CPU #1
    [ 0.367148] pnp: PnP ACPI init
    [ 0.367232] ACPI: bus type pnp registered
    [ 0.367404] pnp 00:00: [mem 0x00000000-0x0009ffff]
    [ 0.367407] pnp 00:00: [mem 0x000e0000-0x000fffff]
    [ 0.367409] pnp 00:00: [mem 0x00100000-0xbf7fffff]
    [ 0.367477] system 00:00: [mem 0x00000000-0x0009ffff] could not be reserved
    [ 0.367541] system 00:00: [mem 0x000e0000-0x000fffff] could not be reserved
    [ 0.367605] system 00:00: [mem 0x00100000-0xbf7fffff] could not be reserved
    [ 0.367670] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
    [ 0.370899] pnp 00:01: [bus 00-ff]
    [ 0.370902] pnp 00:01: [io 0x0cf8-0x0cff]
    [ 0.370905] pnp 00:01: [io 0x0000-0x0cf7 window]
    [ 0.370907] pnp 00:01: [io 0x0d00-0xffff window]
    [ 0.370910] pnp 00:01: [mem 0x000a0000-0x000bffff window]
    [ 0.370912] pnp 00:01: [mem 0xbf800000-0xfedfffff window]
    [ 0.370915] pnp 00:01: [mem 0xfee01000-0xffffffff window]
    [ 0.370917] pnp 00:01: [mem 0x000d0000-0x000dffff window]
    [ 0.371021] pnp 00:01: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
    [ 0.371604] pnp 00:02: [io 0x0378-0x037f]
    [ 0.371607] pnp 00:02: [io 0x0778-0x077a]
    [ 0.371619] pnp 00:02: [irq 7]
    [ 0.371622] pnp 00:02: [dma 1]
    [ 0.371722] pnp 00:02: Plug and Play ACPI device, IDs PNP0401 (active)
    [ 0.371803] pnp 00:03: [io 0x0560-0x056f]
    [ 0.371806] pnp 00:03: [io 0x0570-0x057f]
    [ 0.371808] pnp 00:03: [mem 0xfed40000-0xfed44fff]
    [ 0.371843] pnp 00:03: Plug and Play ACPI device, IDs IFX0102 PNP0c31 (active)
    [ 0.371854] pnp 00:04: [io 0x00f0-0x00ff]
    [ 0.371860] pnp 00:04: [irq 13]
    [ 0.371893] pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active)
    [ 0.371905] pnp 00:05: [io 0x0000-0x000f]
    [ 0.371908] pnp 00:05: [io 0x0080-0x008f]
    [ 0.371910] pnp 00:05: [io 0x00c0-0x00df]
    [ 0.371912] pnp 00:05: [dma 4]
    [ 0.371945] pnp 00:05: Plug and Play ACPI device, IDs PNP0200 (active)
    [ 0.371954] pnp 00:06: [io 0x0061]
    [ 0.371988] pnp 00:06: Plug and Play ACPI device, IDs PNP0800 (active)
    [ 0.371998] pnp 00:07: [io 0x0070-0x0071]
    [ 0.372000] pnp 00:07: [io 0x0072-0x0073]
    [ 0.372006] pnp 00:07: [irq 8]
    [ 0.372045] pnp 00:07: Plug and Play ACPI device, IDs PNP0b00 (active)
    [ 0.372112] pnp 00:08: [mem 0xfed00000-0xfed003ff]
    [ 0.372148] pnp 00:08: Plug and Play ACPI device, IDs PNP0103 (active)
    [ 0.372159] pnp 00:09: [io 0x0060]
    [ 0.372161] pnp 00:09: [io 0x0064]
    [ 0.372167] pnp 00:09: [irq 1]
    [ 0.372202] pnp 00:09: Plug and Play ACPI device, IDs PNP0303 (active)
    [ 0.372215] pnp 00:0a: [irq 12]
    [ 0.372255] pnp 00:0a: Plug and Play ACPI device, IDs SYN0134 SYN0100 SYN0002 PNP0f13 (active)
    [ 0.372387] pnp 00:0b: [io 0x0010-0x001f]
    [ 0.372390] pnp 00:0b: [io 0x0024-0x003f]
    [ 0.372392] pnp 00:0b: [io 0x004e-0x004f]
    [ 0.372394] pnp 00:0b: [io 0x0050-0x0053]
    [ 0.372396] pnp 00:0b: [io 0x0063]
    [ 0.372398] pnp 00:0b: [io 0x0065]
    [ 0.372400] pnp 00:0b: [io 0x0067]
    [ 0.372402] pnp 00:0b: [io 0x0074-0x0077]
    [ 0.372404] pnp 00:0b: [io 0x0090-0x009f]
    [ 0.372406] pnp 00:0b: [io 0x00a4-0x00bd]
    [ 0.372408] pnp 00:0b: [io 0x0500-0x055f]
    [ 0.372411] pnp 00:0b: [io 0x0800-0x080f]
    [ 0.372413] pnp 00:0b: [mem 0xffb00000-0xffbfffff]
    [ 0.372415] pnp 00:0b: [mem 0xfff00000-0xffffffff]
    [ 0.372486] system 00:0b: [io 0x0500-0x055f] has been reserved
    [ 0.372549] system 00:0b: [io 0x0800-0x080f] has been reserved
    [ 0.372611] system 00:0b: [mem 0xffb00000-0xffbfffff] has been reserved
    [ 0.372674] system 00:0b: [mem 0xfff00000-0xffffffff] has been reserved
    [ 0.372737] system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.373400] pnp 00:0c: [irq 23]
    [ 0.373462] pnp 00:0c: Plug and Play ACPI device, IDs HPQ0004 (active)
    [ 0.373485] pnp 00:0d: [io 0x04d0-0x04d1]
    [ 0.373487] pnp 00:0d: [io 0x1000-0x107f]
    [ 0.373490] pnp 00:0d: [io 0x1100-0x113f]
    [ 0.373492] pnp 00:0d: [io 0x1200-0x121f]
    [ 0.373494] pnp 00:0d: [mem 0xf8000000-0xfbffffff]
    [ 0.373497] pnp 00:0d: [mem 0xfec00000-0xfec000ff]
    [ 0.373499] pnp 00:0d: [mem 0xfed20000-0xfed3ffff]
    [ 0.373501] pnp 00:0d: [mem 0xfed45000-0xfed8ffff]
    [ 0.373503] pnp 00:0d: [mem 0xfed90000-0xfed99fff]
    [ 0.373589] system 00:0d: [io 0x04d0-0x04d1] has been reserved
    [ 0.373651] system 00:0d: [io 0x1000-0x107f] has been reserved
    [ 0.373713] system 00:0d: [io 0x1100-0x113f] has been reserved
    [ 0.373775] system 00:0d: [io 0x1200-0x121f] has been reserved
    [ 0.373837] system 00:0d: [mem 0xf8000000-0xfbffffff] has been reserved
    [ 0.373900] system 00:0d: [mem 0xfec00000-0xfec000ff] could not be reserved
    [ 0.373964] system 00:0d: [mem 0xfed20000-0xfed3ffff] has been reserved
    [ 0.374027] system 00:0d: [mem 0xfed45000-0xfed8ffff] has been reserved
    [ 0.374090] system 00:0d: [mem 0xfed90000-0xfed99fff] has been reserved
    [ 0.374153] system 00:0d: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.375020] pnp 00:0e: [mem 0x000cee00-0x000cffff]
    [ 0.375024] pnp 00:0e: [mem 0xfeda0000-0xfedbffff]
    [ 0.375026] pnp 00:0e: [mem 0xfee00000-0xfee00fff]
    [ 0.375112] system 00:0e: [mem 0x000cee00-0x000cffff] has been reserved
    [ 0.375176] system 00:0e: [mem 0xfeda0000-0xfedbffff] has been reserved
    [ 0.375238] system 00:0e: [mem 0xfee00000-0xfee00fff] has been reserved
    [ 0.375302] system 00:0e: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.375317] pnp: PnP ACPI: found 15 devices
    [ 0.375376] ACPI: ACPI bus type pnp unregistered
    [ 0.411992] pci 0000:00:1e.0: BAR 15: assigned [mem 0xc0000000-0xc3ffffff pref]
    [ 0.412067] pci 0000:00:1e.0: BAR 13: assigned [io 0x5000-0x5fff]
    [ 0.412130] pci 0000:00:1c.4: BAR 15: assigned [mem 0xc4000000-0xc41fffff 64bit pref]
    [ 0.412205] pci 0000:00:1c.2: BAR 15: assigned [mem 0xc4200000-0xc43fffff 64bit pref]
    [ 0.412279] pci 0000:00:1c.2: BAR 13: assigned [io 0x6000-0x6fff]
    [ 0.412342] pci 0000:00:1c.1: BAR 15: assigned [mem 0xc4400000-0xc45fffff 64bit pref]
    [ 0.412417] pci 0000:00:1c.1: BAR 13: assigned [io 0x7000-0x7fff]
    [ 0.412479] pci 0000:00:1c.0: PCI bridge to [bus 08-08]
    [ 0.412540] pci 0000:00:1c.0: bridge window [io disabled]
    [ 0.412604] pci 0000:00:1c.0: bridge window [mem disabled]
    [ 0.412667] pci 0000:00:1c.0: bridge window [mem pref disabled]
    [ 0.412734] pci 0000:00:1c.1: PCI bridge to [bus 10-10]
    [ 0.412796] pci 0000:00:1c.1: bridge window [io 0x7000-0x7fff]
    [ 0.412862] pci 0000:00:1c.1: bridge window [mem 0xe4100000-0xe41fffff]
    [ 0.412928] pci 0000:00:1c.1: bridge window [mem 0xc4400000-0xc45fffff 64bit pref]
    [ 0.413007] pci 0000:00:1c.2: PCI bridge to [bus 18-18]
    [ 0.413069] pci 0000:00:1c.2: bridge window [io 0x6000-0x6fff]
    [ 0.413135] pci 0000:00:1c.2: bridge window [mem 0xe4000000-0xe40fffff]
    [ 0.413200] pci 0000:00:1c.2: bridge window [mem 0xc4200000-0xc43fffff 64bit pref]
    [ 0.413280] pci 0000:00:1c.4: PCI bridge to [bus 28-28]
    [ 0.413353] pci 0000:00:1c.4: bridge window [io 0x2000-0x3fff]
    [ 0.413419] pci 0000:00:1c.4: bridge window [mem 0xe0000000-0xe3ffffff]
    [ 0.413484] pci 0000:00:1c.4: bridge window [mem 0xc4000000-0xc41fffff 64bit pref]
    [ 0.413565] pci 0000:02:04.0: BAR 15: assigned [mem 0xc0000000-0xc3ffffff pref]
    [ 0.413639] pci 0000:02:04.0: BAR 16: assigned [mem 0xc8000000-0xcbffffff]
    [ 0.413702] pci 0000:02:04.0: BAR 13: assigned [io 0x5000-0x50ff]
    [ 0.413763] pci 0000:02:04.0: BAR 14: assigned [io 0x5400-0x54ff]
    [ 0.413825] pci 0000:02:04.0: CardBus bridge to [bus 03-06]
    [ 0.413886] pci 0000:02:04.0: bridge window [io 0x5000-0x50ff]
    [ 0.413952] pci 0000:02:04.0: bridge window [io 0x5400-0x54ff]
    [ 0.414017] pci 0000:02:04.0: bridge window [mem 0xc0000000-0xc3ffffff pref]
    [ 0.414093] pci 0000:02:04.0: bridge window [mem 0xc8000000-0xcbffffff]
    [ 0.414159] pci 0000:00:1e.0: PCI bridge to [bus 02-03]
    [ 0.414221] pci 0000:00:1e.0: bridge window [io 0x5000-0x5fff]
    [ 0.414287] pci 0000:00:1e.0: bridge window [mem 0xe4200000-0xe45fffff]
    [ 0.414353] pci 0000:00:1e.0: bridge window [mem 0xc0000000-0xc3ffffff pref]
    [ 0.414442] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    [ 0.414508] pci 0000:00:1c.0: setting latency timer to 64
    [ 0.414518] pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
    [ 0.414583] pci 0000:00:1c.1: setting latency timer to 64
    [ 0.414593] pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
    [ 0.414658] pci 0000:00:1c.2: setting latency timer to 64
    [ 0.414666] pci 0000:00:1c.4: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    [ 0.414732] pci 0000:00:1c.4: setting latency timer to 64
    [ 0.414741] pci 0000:00:1e.0: setting latency timer to 64
    [ 0.414751] pci 0000:02:04.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    [ 0.414818] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
    [ 0.414821] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
    [ 0.414823] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
    [ 0.414826] pci_bus 0000:00: resource 7 [mem 0xbf800000-0xfedfffff]
    [ 0.414828] pci_bus 0000:00: resource 8 [mem 0xfee01000-0xffffffff]
    [ 0.414831] pci_bus 0000:00: resource 9 [mem 0x000d0000-0x000dffff]
    [ 0.414834] pci_bus 0000:10: resource 0 [io 0x7000-0x7fff]
    [ 0.414836] pci_bus 0000:10: resource 1 [mem 0xe4100000-0xe41fffff]
    [ 0.414839] pci_bus 0000:10: resource 2 [mem 0xc4400000-0xc45fffff 64bit pref]
    [ 0.414842] pci_bus 0000:18: resource 0 [io 0x6000-0x6fff]
    [ 0.414844] pci_bus 0000:18: resource 1 [mem 0xe4000000-0xe40fffff]
    [ 0.414847] pci_bus 0000:18: resource 2 [mem 0xc4200000-0xc43fffff 64bit pref]
    [ 0.414849] pci_bus 0000:28: resource 0 [io 0x2000-0x3fff]
    [ 0.414852] pci_bus 0000:28: resource 1 [mem 0xe0000000-0xe3ffffff]
    [ 0.414855] pci_bus 0000:28: resource 2 [mem 0xc4000000-0xc41fffff 64bit pref]
    [ 0.414857] pci_bus 0000:02: resource 0 [io 0x5000-0x5fff]
    [ 0.414860] pci_bus 0000:02: resource 1 [mem 0xe4200000-0xe45fffff]
    [ 0.414862] pci_bus 0000:02: resource 2 [mem 0xc0000000-0xc3ffffff pref]
    [ 0.414865] pci_bus 0000:02: resource 4 [io 0x0000-0x0cf7]
    [ 0.414867] pci_bus 0000:02: resource 5 [io 0x0d00-0xffff]
    [ 0.414870] pci_bus 0000:02: resource 6 [mem 0x000a0000-0x000bffff]
    [ 0.414872] pci_bus 0000:02: resource 7 [mem 0xbf800000-0xfedfffff]
    [ 0.414875] pci_bus 0000:02: resource 8 [mem 0xfee01000-0xffffffff]
    [ 0.414877] pci_bus 0000:02: resource 9 [mem 0x000d0000-0x000dffff]
    [ 0.414880] pci_bus 0000:03: resource 0 [io 0x5000-0x50ff]
    [ 0.414882] pci_bus 0000:03: resource 1 [io 0x5400-0x54ff]
    [ 0.414885] pci_bus 0000:03: resource 2 [mem 0xc0000000-0xc3ffffff pref]
    [ 0.414887] pci_bus 0000:03: resource 3 [mem 0xc8000000-0xcbffffff]
    [ 0.414935] NET: Registered protocol family 2
    [ 0.415062] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
    [ 0.415368] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
    [ 0.415894] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
    [ 0.416143] TCP: Hash tables configured (established 131072 bind 65536)
    [ 0.416205] TCP reno registered
    [ 0.416264] UDP hash table entries: 512 (order: 2, 16384 bytes)
    [ 0.416330] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
    [ 0.416507] NET: Registered protocol family 1
    [ 0.416583] pci 0000:00:02.0: Boot video device
    [ 0.416785] PCI: CLS 64 bytes, default 64
    [ 0.416838] Unpacking initramfs...
    [ 0.451007] Freeing initrd memory: 1760k freed
    [ 0.452054] apm: BIOS not found.
    [ 0.452259] audit: initializing netlink socket (disabled)
    [ 0.452332] type=2000 audit(1308999272.449:1): initialized
    [ 0.452758] highmem bounce pool size: 64 pages
    [ 0.452821] HugeTLB registered 4 MB page size, pre-allocated 0 pages
    [ 0.455200] VFS: Disk quotas dquot_6.5.2
    [ 0.455344] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
    [ 0.455524] msgmni has been set to 1689
    [ 0.455791] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
    [ 0.456544] io scheduler noop registered
    [ 0.456604] io scheduler deadline registered
    [ 0.456686] io scheduler cfq registered (default)
    [ 0.456882] pcieport 0000:00:1c.0: setting latency timer to 64
    [ 0.456945] pcieport 0000:00:1c.0: irq 40 for MSI/MSI-X
    [ 0.457031] pcieport 0000:00:1c.1: setting latency timer to 64
    [ 0.457087] pcieport 0000:00:1c.1: irq 41 for MSI/MSI-X
    [ 0.457173] pcieport 0000:00:1c.2: setting latency timer to 64
    [ 0.457229] pcieport 0000:00:1c.2: irq 42 for MSI/MSI-X
    [ 0.457316] pcieport 0000:00:1c.4: setting latency timer to 64
    [ 0.457371] pcieport 0000:00:1c.4: irq 43 for MSI/MSI-X
    [ 0.457576] intel_idle: MWAIT substates: 0x22220
    [ 0.457578] intel_idle: does not run on family 6 model 15
    [ 0.457584] ERST: Table is not found!
    [ 0.457656] isapnp: Scanning for PnP cards...
    [ 0.814935] isapnp: No Plug & Play device found
    [ 0.815057] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
    [ 1.017338] i8042: PNP: PS/2 Controller [PNP0303:C298,PNP0f13:C299] at 0x60,0x64 irq 1,12
    [ 1.019024] i8042: Detected active multiplexing controller, rev 1.1
    [ 1.019854] serio: i8042 KBD port at 0x60,0x64 irq 1
    [ 1.019947] serio: i8042 AUX0 port at 0x60,0x64 irq 12
    [ 1.020050] serio: i8042 AUX1 port at 0x60,0x64 irq 12
    [ 1.020136] serio: i8042 AUX2 port at 0x60,0x64 irq 12
    [ 1.020222] serio: i8042 AUX3 port at 0x60,0x64 irq 12
    [ 1.020375] mousedev: PS/2 mouse device common for all mice
    [ 1.020520] rtc_cmos 00:07: RTC can wake from S4
    [ 1.041983] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
    [ 1.043462] rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0
    [ 1.043553] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
    [ 1.043640] cpuidle: using governor ladder
    [ 1.043698] cpuidle: using governor menu
    [ 1.044008] TCP cubic registered
    [ 1.044067] NET: Registered protocol family 17
    [ 1.044133] Registering the dns_resolver key type
    [ 1.044208] Using IPI No-Shortcut mode
    [ 1.044349] PM: Checking hibernation image partition /dev/disk/by-uuid/1bdc571f-0c58-4972-91ba-3dddae8434d6
    [ 1.054023] PM: Hibernation image not present or could not be loaded.
    [ 1.054029] registered taskstats version 1
    [ 1.054676] rtc_cmos 00:07: setting system clock to 2011-06-25 10:54:34 UTC (1308999274)
    [ 1.054790] Initializing network drop monitor service
    [ 1.054922] Freeing unused kernel memory: 524k freed
    [ 1.055268] Write protecting the kernel text: 3384k
    [ 1.055352] Write protecting the kernel read-only data: 1032k
    [ 1.071412] udevd[68]: starting version 171
    [ 1.187956] SCSI subsystem initialized
    [ 1.210300] libata version 3.00 loaded.
    [ 1.213463] ata_piix 0000:00:1f.1: version 2.13
    [ 1.213484] ata_piix 0000:00:1f.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    [ 1.213591] ata_piix 0000:00:1f.1: setting latency timer to 64
    [ 1.213968] scsi0 : ata_piix
    [ 1.214128] scsi1 : ata_piix
    [ 1.214568] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x40c0 irq 14
    [ 1.214632] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x40c8 irq 15
    [ 1.214903] ata2: port disabled. ignoring.
    [ 1.373683] ata1.00: ATAPI: HL-DT-ST DVDRAM GSA-T20N, WC05, max MWDMA2
    [ 1.386897] ata1.00: configured for MWDMA2
    [ 1.392272] scsi 0:0:0:0: CD-ROM HL-DT-ST DVDRAM GSA-T20N WC05 PQ: 0 ANSI: 5
    [ 1.398036] ahci 0000:00:1f.2: version 3.0
    [ 1.398053] ahci 0000:00:1f.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
    [ 1.398174] ahci 0000:00:1f.2: irq 44 for MSI/MSI-X
    [ 1.398216] ahci: SSS flag set, parallel bus scan disabled
    [ 1.398301] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 3 ports 3 Gbps 0x1 impl SATA mode
    [ 1.398376] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part ccc
    [ 1.398453] ahci 0000:00:1f.2: setting latency timer to 64
    [ 1.398893] scsi2 : ahci
    [ 1.399132] scsi3 : ahci
    [ 1.399311] scsi4 : ahci
    [ 1.399475] ata3: SATA max UDMA/133 abar m2048@0xe4809000 port 0xe4809100 irq 44
    [ 1.399551] ata4: DUMMY
    [ 1.399608] ata5: DUMMY
    [ 1.453359] Refined TSC clocksource calibration: 1994.999 MHz.
    [ 1.453425] Switching to clocksource tsc
    [ 1.716689] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
    [ 1.718502] ata3.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
    [ 1.718578] ata3.00: ACPI cmd b1/c1:00:00:00:00:a0 (DEVICE CONFIGURATION OVERLAY) filtered out
    [ 1.718690] ata3.00: ACPI cmd c6/00:10:00:00:00:a0 (SET MULTIPLE MODE) succeeded
    [ 1.718695] ata3.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
    [ 1.719204] ata3.00: ATA-7: TOSHIBA MK1237GSX, DL132C, max UDMA/100
    [ 1.719267] ata3.00: 234441648 sectors, multi 16: LBA48
    [ 1.721104] ata3.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
    [ 1.721179] ata3.00: ACPI cmd b1/c1:00:00:00:00:a0 (DEVICE CONFIGURATION OVERLAY) filtered out
    [ 1.721289] ata3.00: ACPI cmd c6/00:10:00:00:00:a0 (SET MULTIPLE MODE) succeeded
    [ 1.721293] ata3.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
    [ 1.721801] ata3.00: configured for UDMA/100
    [ 1.721984] scsi 2:0:0:0: Direct-Access ATA TOSHIBA MK1237GS DL13 PQ: 0 ANSI: 5
    [ 1.731236] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
    [ 1.731315] cdrom: Uniform CD-ROM driver Revision: 3.20
    [ 1.731598] sr 0:0:0:0: Attached scsi CD-ROM sr0
    [ 1.731702] sd 2:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/111 GiB)
    [ 1.731837] sd 2:0:0:0: [sda] Write Protect is off
    [ 1.731902] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
    [ 1.731926] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [ 1.845493] sda: sda1 sda2 sda3 < sda5 sda6 sda7 > sda4
    [ 1.846050] sd 2:0:0:0: [sda] Attached SCSI disk
    [ 2.761814] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
    [ 5.051896] udevd[281]: starting version 171
    [ 5.377558] fuse init (API version 7.16)
    [ 5.559732] vboxdrv: Found 2 processor cores.
    [ 5.559807] vboxdrv: fAsync=0 offMin=0x1d6 offMax=0x15ae
    [ 5.559854] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
    [ 5.559857] vboxdrv: Successfully loaded version 4.0.8 (interface 0x00180000).
    [ 5.781012] ACPI: acpi_idle registered with cpuidle
    [ 5.786645] Monitor-Mwait will be used to enter C-1 state
    [ 5.786678] Monitor-Mwait will be used to enter C-2 state
    [ 5.786684] Marking TSC unstable due to TSC halts in idle
    [ 5.786717] Switching to clocksource hpet
    [ 6.051738] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input1
    [ 6.051745] ACPI: Sleep Button [C2BF]
    [ 6.051804] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input2
    [ 6.051865] ACPI: Lid Switch [C153]
    [ 6.051938] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
    [ 6.051942] ACPI: Power Button [PWRF]
    [ 6.057265] ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
    [ 6.066477] ACPI: AC Adapter [C239] (on-line)
    [ 6.114690] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
    [ 6.114702] ACPI: Battery Slot [C23B] (battery present)
    [ 6.114779] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
    [ 6.114785] ACPI: Battery Slot [C23A] (battery absent)
    [ 6.115381] wmi: Mapper loaded
    [ 6.172603] tpm_tis 00:03: 1.2 TPM (device-id 0xB, rev-id 16)
    [ 6.265090] ACPI: Fan [C3C1] (off)
    [ 6.265157] ACPI: Fan [C3C2] (off)
    [ 6.265220] ACPI: Fan [C3C3] (off)
    [ 6.265284] ACPI: Fan [C3C4] (off)
    [ 6.265348] ACPI: Fan [C3C5] (off)
    [ 6.379163] input: PC Speaker as /devices/platform/pcspkr/input/input4
    [ 6.397190] input: HP WMI hotkeys as /devices/virtual/input/input5
    [ 6.463770] hp_accel: hardware type NC6710x found
    [ 6.513243] iTCO_vendor_support: vendor-support=0
    [ 6.570412] lis3lv02d: 12 bits sensor found
    [ 6.580235] thermal LNXTHERM:00: registered as thermal_zone0
    [ 6.580238] ACPI: Thermal Zone [TZ3] (41 C)
    [ 6.803030] yenta_cardbus 0000:02:04.0: CardBus bridge found [103c:30c0]
    [ 6.831034] Linux agpgart interface v0.103
    [ 6.886604] usbcore: registered new interface driver usbfs
    [ 6.886833] usbcore: registered new interface driver hub
    [ 6.890217] usbcore: registered new device driver usb
    [ 6.901294] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.06
    [ 6.901393] iTCO_wdt: Found a ICH8M TCO device (Version=2, TCOBASE=0x1060)
    [ 6.901464] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
    [ 6.926164] tg3.c:v3.117 (January 25, 2011)
    [ 6.926184] tg3 0000:18:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
    [ 6.926195] tg3 0000:18:00.0: setting latency timer to 64
    [ 6.930903] yenta_cardbus 0000:02:04.0: ISA IRQ mask 0x0cb8, PCI irq 16
    [ 6.930908] yenta_cardbus 0000:02:04.0: Socket status: 30000006
    [ 6.930913] pci_bus 0000:02: Raising subordinate bus# of parent bus (#02) from #03 to #06
    [ 6.930922] yenta_cardbus 0000:02:04.0: pcmcia: parent PCI bridge window: [io 0x5000-0x5fff]
    [ 6.930926] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x5000-0x5fff: excluding 0x5000-0x50ff 0x5400-0x54ff
    [ 6.938390] yenta_cardbus 0000:02:04.0: pcmcia: parent PCI bridge window: [mem 0xe4200000-0xe45fffff]
    [ 6.938393] pcmcia_socket pcmcia_socket0: cs: memory probe 0xe4200000-0xe45fffff: excluding 0xe4200000-0xe423ffff
    [ 6.938409] yenta_cardbus 0000:02:04.0: pcmcia: parent PCI bridge window: [mem 0xc0000000-0xc3ffffff pref]
    [ 6.938412] pcmcia_socket pcmcia_socket0: cs: memory probe 0xc0000000-0xc3ffffff: excluding 0xc0000000-0xc3ffffff
    [ 6.963502] firewire_ohci 0000:02:04.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
    [ 6.990831] ppdev: user-space parallel port driver
    [ 6.995198] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
    [ 6.995231] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
    [ 6.995250] ehci_hcd 0000:00:1a.7: setting latency timer to 64
    [ 6.995254] ehci_hcd 0000:00:1a.7: EHCI Host Controller
    [ 6.995285] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
    [ 7.000019] tg3 0000:18:00.0: vpd r/w failed. This is likely a firmware bug on this device. Contact the card vendor for a firmware update.
    [ 7.006712] ehci_hcd 0000:00:1a.7: debug port 1
    [ 7.011560] ehci_hcd 0000:00:1a.7: cache line size of 64 is not supported
    [ 7.011583] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xe4800000
    [ 7.023711] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
    [ 7.023894] hub 1-0:1.0: USB hub found
    [ 7.023900] hub 1-0:1.0: 4 ports detected
    [ 7.024015] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 20 (level, low) -> IRQ 20
    [ 7.024029] ehci_hcd 0000:00:1d.7: setting latency timer to 64
    [ 7.024034] ehci_hcd 0000:00:1d.7: EHCI Host Controller
    [ 7.024044] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
    [ 7.024158] firewire_ohci: Added fw-ohci device 0000:02:04.1, OHCI v1.10, 4 IR + 4 IT contexts, quirks 0x1
    [ 7.033900] uhci_hcd: USB Universal Host Controller Interface driver
    [ 7.037377] ehci_hcd 0000:00:1d.7: debug port 1
    [ 7.041256] ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
    [ 7.041277] ehci_hcd 0000:00:1d.7: irq 20, io mem 0xe4808000
    [ 7.053398] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
    [ 7.053920] hub 2-0:1.0: USB hub found
    [ 7.053926] hub 2-0:1.0: 6 ports detected
    [ 7.054087] agpgart-intel 0000:00:00.0: Intel 965GM Chipset
    [ 7.054200] agpgart-intel 0000:00:00.0: detected gtt size: 524288K total, 262144K mappable
    [ 7.054704] agpgart-intel 0000:00:00.0: detected 8192K stolen memory
    [ 7.055143] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
    [ 7.055302] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    [ 7.055312] uhci_hcd 0000:00:1a.0: setting latency timer to 64
    [ 7.055317] uhci_hcd 0000:00:1a.0: UHCI Host Controller
    [ 7.055329] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
    [ 7.060031] tg3 0000:18:00.0: vpd r/w failed. This is likely a firmware bug on this device. Contact the card vendor for a firmware update.
    [ 7.063576] uhci_hcd 0000:00:1a.0: irq 16, io base 0x00004020
    [ 7.063770] hub 3-0:1.0: USB hub found
    [ 7.063775] hub 3-0:1.0: 2 ports detected
    [ 7.063872] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
    [ 7.063881] uhci_hcd 0000:00:1a.1: setting latency timer to 64
    [ 7.063886] uhci_hcd 0000:00:1a.1: UHCI Host Controller
    [ 7.063894] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
    [ 7.073405] uhci_hcd 0000:00:1a.1: irq 17, io base 0x00004040
    [ 7.073562] hub 4-0:1.0: USB hub found
    [ 7.073566] hub 4-0:1.0: 2 ports detected
    [ 7.073657] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
    [ 7.073665] uhci_hcd 0000:00:1d.0: setting latency timer to 64
    [ 7.073671] uhci_hcd 0000:00:1d.0: UHCI Host Controller
    [ 7.073679] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
    [ 7.083408] parport_pc 00:02: reported by Plug and Play ACPI
    [ 7.083486] parport0: PC-style at 0x378 (0x778), irq 7
    [ 7.083667] uhci_hcd 0000:00:1d.0: irq 20, io base 0x00004060
    [ 7.083832] hub 5-0:1.0: USB hub found
    [ 7.083837] hub 5-0:1.0: 2 ports detected
    [ 7.083930] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
    [ 7.083938] uhci_hcd 0000:00:1d.1: setting latency timer to 64
    [ 7.083942] uhci_hcd 0000:00:1d.1: UHCI Host Controller
    [ 7.083951] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
    [ 7.084066] , dma 1 [PCSPP,TRISTATE,COMPAT,ECP,DMA]
    [ 7.094562] sr 0:0:0:0: Attached scsi generic sg0 type 5
    [ 7.094640] sd 2:0:0:0: Attached scsi generic sg1 type 0
    [ 7.096796] input: ST LIS3LV02DL Accelerometer as /devices/platform/lis3lv02d/input/input6
    [ 7.096914] Registered led device: hp::hddprotect
    [ 7.096935] hp_accel: driver loaded
    [ 7.097080] uhci_hcd 0000:00:1d.1: irq 21, io base 0x00004080
    [ 7.097249] hub 6-0:1.0: USB hub found
    [ 7.097254] hub 6-0:1.0: 2 ports detected
    [ 7.097349] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
    [ 7.097362] uhci_hcd 0000:00:1d.2: setting latency timer to 64
    [ 7.097366] uhci_hcd 0000:00:1d.2: UHCI Host Controller
    [ 7.097374] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
    [ 7.112415] uhci_hcd 0000:00:1d.2: irq 18, io base 0x000040a0
    [ 7.112609] hub 7-0:1.0: USB hub found
    [ 7.112614] hub 7-0:1.0: 2 ports detected
    [ 7.120662] tg3 0000:18:00.0: vpd r/w failed. This is likely a firmware bug on this device. Contact the card vendor for a firmware update.
    [ 7.121675] tg3 0000:18:00.0: eth0: Tigon3 [partno(none) rev b002] (PCI Express) MAC address 00:1c:c4:c6:6f:ad
    [ 7.121680] tg3 0000:18:00.0: eth0: attached PHY is 5787 (10/100/1000Base-T Ethernet) (WireSpeed[1])
    [ 7.121684] tg3 0000:18:00.0: eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
    [ 7.121687] tg3 0000:18:00.0: eth0: dma_rwctrl[76180000] dma_mask[64-bit]
    [ 7.208882] cfg80211: Calling CRDA to update world regulatory domain
    [ 7.380385] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x100-0x3af: excluding 0x170-0x177 0x1f0-0x1f7 0x370-0x37f
    [ 7.382688] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3e0-0x4ff: excluding 0x3f0-0x3f7 0x4d0-0x4d7
    [ 7.383693] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x820-0x8ff: clean.
    [ 7.384516] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xc00-0xcf7: clean.
    [ 7.385421] pcmcia_socket pcmcia_socket0: cs: memory probe 0x0c0000-0x0fffff: excluding 0xc0000-0xcffff 0xe0000-0xfffff
    [ 7.385491] pcmcia_socket pcmcia_socket0: cs: memory probe 0xa0000000-0xa0ffffff: excluding 0xa0000000-0xa0ffffff
    [ 7.385557] pcmcia_socket pcmcia_socket0: cs: memory probe 0x60000000-0x60ffffff: excluding 0x60000000-0x60ffffff
    [ 7.385625] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xa00-0xaff: clean.
    [ 7.510546] thermal LNXTHERM:01: registered as thermal_zone1
    [ 7.510549] ACPI: Thermal Zone [TZ4] (23 C)
    [ 7.526773] firewire_core: created device fw0: GUID 00023f99299d0810, S400
    [ 7.532557] [drm] Initialized drm 1.1.0 20060810
    [ 7.582098] thermal LNXTHERM:02: registered as thermal_zone2
    [ 7.582101] ACPI: Thermal Zone [TZ5] (22 C)
    [ 7.600111] thermal LNXTHERM:03: registered as thermal_zone3
    [ 7.600115] ACPI: Thermal Zone [TZ0] (51 C)
    [ 7.603276] thermal LNXTHERM:04: registered as thermal_zone4
    [ 7.603279] ACPI: Thermal Zone [TZ1] (49 C)
    [ 7.670060] usb 3-1: new full speed USB device number 2 using uhci_hcd
    [ 7.733614] HDA Intel 0000:00:1b.0: power state changed by ACPI to D0
    [ 7.733621] HDA Intel 0000:00:1b.0: power state changed by ACPI to D0
    [ 7.733637] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    [ 7.733698] HDA Intel 0000:00:1b.0: irq 45 for MSI/MSI-X
    [ 7.733729] HDA Intel 0000:00:1b.0: setting latency timer to 64
    [ 7.856415] Synaptics Touchpad, model: 1, fw: 6.2, id: 0x2580b1, caps: 0xa04793/0x300000/0x0
    [ 7.856421] serio: Synaptics pass-through port at isa0060/serio4/input0
    [ 7.897114] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input7
    [ 7.911295] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input8
    [ 7.948997] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    [ 7.949004] i915 0000:00:02.0: setting latency timer to 64
    [ 7.962188] i915 0000:00:02.0: irq 46 for MSI/MSI-X
    [ 7.962194] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
    [ 7.962196] [drm] Driver supports precise vblank timestamp query.
    [ 8.070059] usb 5-2: new full speed USB device number 2 using uhci_hcd
    [ 8.090218] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
    [ 8.090555] [drm] initialized overlay support
    [ 8.104983] iwl3945: Intel(R) PRO/Wireless 3945ABG/BG Network Connection driver for Linux, in-tree:s
    [ 8.104986] iwl3945: Copyright(c) 2003-2011 Intel Corporation
    [ 8.105051] iwl3945 0000:10:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
    [ 8.105066] iwl3945 0000:10:00.0: setting latency timer to 64
    [ 8.160258] iwl3945 0000:10:00.0: Tunable channels: 13 802.11bg, 23 802.11a channels
    [ 8.160262] iwl3945 0000:10:00.0: Detected Intel Wireless WiFi Link 3945ABG
    [ 8.160407] iwl3945 0000:10:00.0: irq 47 for MSI/MSI-X
    [ 8.160646] Registered led device: phy0-led
    [ 8.253535] ieee80211 phy0: Selected rate control algorithm 'iwl-3945-rs'
    [ 8.476535] fbcon: inteldrmfb (fb0) is primary device
    [ 8.521567] Console: switching to colour frame buffer device 160x50
    [ 8.525923] fb0: inteldrmfb frame buffer device
    [ 8.525925] drm: registered panic notifier
    [ 8.526564] cfg80211: World regulatory domain updated:
    [ 8.526567] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
    [ 8.526570] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
    [ 8.526573] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
    [ 8.526576] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
    [ 8.526578] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
    [ 8.526581] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
    [ 8.527338] ACPI Exception: AE_AML_PACKAGE_LIMIT, Index (0x0000000000000004) is beyond end of object (20110316/exoparg2-418)
    [ 8.527351] ACPI Error: Method parse/execution failed [\_SB_.C003.C098._DOD] (Node f4833588), AE_AML_PACKAGE_LIMIT (20110316/psparse-536)
    [ 8.527361] ACPI Exception: AE_AML_PACKAGE_LIMIT, Evaluating _DOD (20110316/video-1148)
    [ 8.528072] acpi device:01: registered as cooling_device7
    [ 8.528588] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input9
    [ 8.528684] ACPI: Video Device [C098] (multi-head: yes rom: no post: no)
    [ 8.529162] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
    [ 9.024454] cfg80211: Calling CRDA for country: NL
    [ 9.027257] Bluetooth: Core ver 2.16
    [ 9.027284] NET: Registered protocol family 31
    [ 9.027286] Bluetooth: HCI device and connection manager initialized
    [ 9.027289] Bluetooth: HCI socket layer initialized
    [ 9.027291] Bluetooth: L2CAP socket layer initialized
    [ 9.028560] Bluetooth: SCO socket layer initialized
    [ 9.032087] cfg80211: Regulatory domain changed to country: NL
    [ 9.032091] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
    [ 9.032253] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
    [ 9.032256] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
    [ 9.032258] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm)
    [ 9.032261] cfg80211: (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm)
    [ 9.074179] Bluetooth: Generic Bluetooth USB driver ver 0.6
    [ 9.074571] usbcore: registered new interface driver btusb
    [ 10.265890] EXT4-fs (sda1): re-mounted. Opts: (null)
    [ 10.367394] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
    [ 10.429791] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null)
    [ 10.622332] Adding 3421840k swap on /dev/sda2. Priority:-1 extents:1 across:3421840k
    [ 15.937897] coretemp coretemp.0: TjMax is assumed as 100 C!
    [ 15.937979] coretemp coretemp.1: TjMax is assumed as 100 C!
    [ 21.256096] iwl3945 0000:10:00.0: load

    The solution which is working for me is the following.
    Create the following file:
    /etc/modprobe.d/iwl3945.conf
    And put the following in it:
    options iwl3945 disable_hw_scan=0
    Of course the file name in modprobe.d can be different but must end with .conf
    via: http://ubuntuforums.org/showthread.php?t=1837729

  • After installed Home Hub 5 my wireless speed drop ...

    Hi there.....
    I wonder if anyone can help me with this. I got my Home Hub 5 today to replaced my Home hub 3. Once I installed the home hub 5 all my wireless device has dropped to 10mb!
    I don"t know what else can I do coz I tried resetting the home hub 5 and change all the setting on the home hub 5 but still only give me 10mb!
    Can anyone please help
    Kit Kat
    Solved!
    Go to Solution.

    Hi there.............
    I have solved the problem why the speed has dropped down to 10 mb on wireless device!
    For anyone in the future that upgrade to the home Hub 5 I will like to mention the reason so they know what to do:
    Once you installed the home hub 5 , turn it on and add wireless device to it . When you open the browser on your wireless device Bt home hub will pop up the ' parental guide ' page for you to set up . You can set it up or click do not want it then it's will go back to the main web page !
    Because some of us who use apple device such as iphone don't use the browers and use the apps so didn't know that .
    So once you went through the parental guide page your bt speed on your device will went back to full speed !! All my wireless device went back to normal around 50 mb !!
    I hope the above statement will help who ever going to upgrade to home hub 5 soon and will notice why the speed drop so much and what is the reason for it and don't need to mess around with your home hub channel coz just the simple parental guide set up page need to finish the setting !'
    Kit kat

  • WRT54G2 v1-Wireless speed drops after a few hours/days, changing channel fixes it

    Hi.
    I have a WRT54G2 version 1 with the latest firmware from June 2009.
    I have found that it performs very well (10-11mb wireless speeds) for a while (a few hours or sometimes a few days) but then the wireless performance drops below 1mb. Wired performance is not impacted. 
    It seems that I can immediately solve the issue by changing to another channel. The speed jumps right back up. However the same problem happens again eventually and again changing the channel fixes it (and even changing it back to the channel I had originally will fix it). 
    Any thoughts? I've never had a router do this and it's quite annoying.
    Thanks

    Nope this didn't fix it within minutes the same issue popped up. Note that this doesn't occur with another wireless router I own (I swapped it out just to test). I'd just not even bother with the WRT but my Vonage box doesn't work with my other router so I need to use this one. Any other ideas?
    (Mod Note: Edited for guideline compliance.)

  • HH3 Wireless speed drops but ethernet remains fast

    Hi, I'ven been experiencing random drops in my wifi speed on HH3, what is going on please?
    My set up is as follows. I have a PC, primarily used for gaming which I have connected directly using a RJ45 cable into the wireless hub, my laptop and smartphone use the wireless connection.
    This is the speed results of my PC (ethernet).
    This is the speed result of my laptop (wireless) and other wireless devices.
    I've gone into my the HH3 settings, restarted the router, reset to factory defaults, changed the channel to manual,  changed the interface type to 802.11 b/g/n 40mhz but the problems still persist daily!
    Any ideas or do I have a dough HH3 wireless router?

    I just found this http://nlug.ml1.co.uk/2013/01/what-wifi-channel/3840
    WiFi “g” or “n” (802.11g/n) uses nominally a 20MHz channel width, suggesting the use of channels 1, 5, 9 and 13
    WiFi “n” (802.11n) can use a 40MHz channel width, that then suggests the use of channels 3 and 11 to maximize use of the 2.4GHz band.
    If you found this post helpful, please click on the star on the left
    If not, I'll try again

  • Wireless speed drop?

    I just had my bellsouth dsl upgraded to 3MB/sec, and I tested my Windows computer upstairs that is wired through my new Airport Extreme 802.11n basestation and got over 3 MB/sec download speed and 384 kb/sec upload speed using Speakeasy dsl test. When I tried the same test downstairs using my brand new Macbook Pro connected wirelessy to the same basestation, Speakeasy stated that my download speed is just over 700 KB/sec and almost 300 kb/sec upload. Any reason why this is happening? Is this normal or is there some sort of setting adjustment in the utility to increase my wireless download speed?

    Check the signal & noise using iStumbler. From wired connections you should always get the max. I get my wireless max from all floors, but again it all depends on your walls, and any devices you may have (phones, microwaves, etc.)

  • Wireless downloading speeds dropped

    Hi, 
    Really unsure about tech stuff but on 24/09/2014 had major issues with my wireless speed dropping hugely. The night before was able to stream TV, play games and many other activitives at the same time. The following morning found that every device I own on the property had close to 0 connection speeds though signal strength was good. Did the BT wholesale speed check found my wireless download speed was less then 1 on other occasions less than 0.1. When the ethernet was connected to the router speeds were over 37mbps so its clearly my wireless. Did the inssider check and my link score is 71, Im on channel 6 atm. Not sure if anyone has had similar issues and resolved them, BT told me the fault was on my property but seems a bit flippant as the change was so dramatic and occurred overnight. Any help would be grateful.,

    Which Homehub are you using?
    Try a different channel.
    If you found this post helpful, please click on the star on the left
    If not, I'll try again

  • Problem with the wireless speed on windows with bootcamp

    I've got a problem with the following:
    the wireless card of my mac pro is very slow when i run windows on my mac pro with bootcamp
    When i just run OSX everything works fine, but in windows, when I connect to the wireless my wireless speed
    drops to 11-18mbs.
    First I thought that it was a drivers issue, but after the update of bootcamp drivers 1.4 the problem still exist.
    First I had a Topcom wireless router now I've bought a Apple Airport Extreme, but the problem isn't solved yet...
    The router isn't 2 meters away from my mac.
    And the wireless speed is fine when i connect with my dads windows laptop...
    Does anyone has a solution? using a cable isnt a solution for me because in September I will move with my mac pro one floor down.

    You might want to ask this in the Boot Camp forums. As your wireless work fine under Mac OS X it sounds to be a software issue as opposed to a hardware one which means as Windows users they'll better be able to help.

  • 5GHz Speed Drops By Half Over 2.5GHz

    I recently moved my Time Capsule to 5GHz due to the wireless access point density in my area. I did notice greatly improved signal and reliability.
    However, I noticed my speed dropped from 20Mbps to about 9Mbps.
    My Time Capsule plugs into my Cable Modem, which is also a 2.5GHz wireless access point (part of the problem), when I switch my Mac to the 2.5 GHz Cable Modem, my speed returns to normal. When I switch it back to the Time Capsule, it drops by over half. The TC is being extended by an Airport Express (capable of 5GHz as well).
    Obviously this is unacceptable. Is this how the 5GHz range works? It compromises your speed in exchange for better connectivity?
    The Time Capsule is set to select its 5GHz channel automatically. Could this be part of the problem?
    My iPad and iPhone both access the 5GHz TC, are these pulling the network speed down? They dont pull the speed down in the 2.5GHz mode.
    Can anything be done to optimize the connection to restore my speed, or do I have to drop back to 2.5GHz connection.

    It might be helpful to understand that there are always trade offs with any design.
    While 5 GHz signals are capable of higher speeds than 2.4 GHz, the higher frequency signals are not as strong as 2.4 GHz signals. So, any obstructions in the signal path will affect the 5 GHz signal more than a 2.4 GHz signal.
    For that reason, it is a good idea to think of 5 GHz as a line-of-sight deal. It will usually work well in the same room as the wireless router, but once you turn the corner and head down the hall, the 5 GHz signal strength will fall off rapidly.
    This may likely be what you are experiencing. Your post does not provide information about where the TC is located or where other devices are located and what obstructions may be present in the signal path.  So, we're guessing a bit here.
    My iPad and iPhone both access the 5GHz TC, are these pulling the network speed down?
    The iPad is capable of connecting to a 5 GHz signal, but the iPhone is not....it can only connect at 2.4 GHz.
    Can anything be done to optimize the connection to restore my speed, or do I have to drop back to 2.5GHz connection.
    All you can really do is try to minimize obstructions in the signal path. Give the TC as clear of a look into the room as possible and each wireless device as clear of a look at the TC as possible.
    The same rules would apply to an AirPort Express that is set up to "extend" the wireless signal. You might need to move the Express closer to the Time Capsule so that it will pick up a stronger and faster signal to "extend".
    If you have the ability to connect the AirPort Express using an Ethernet cable back to the Time Capsule, the Express will provide a much faster signal that way since if receives full bandwidth over the wire. If it extends using wireless only, it can only extend the quality of signal that it receives. In other words, if it gets a slow signal, that is what will be extended.

  • Wireless Router Dropping download speeds

    I have a WRT310N router. Ever since upgrading to Snow Leopard, my wireless download speeds decrease the further I get away from the machine. While my signal indicator is full strength, my speed drops from 16mbps download to just around 1-2mbps. I've upgraded to the latest firmware, turned off any potentially conflicting wireless devices (baby monitor, Wii, etc) and nothing seems to effect. Interestingly, my upload speeds remain uneffected.
    Any ideas?

    Did you reset the router after upgrading the router's firmware..If not then,reset the router and reconfigure it from the scratch.

  • EA6200 in Bridge Mode Slow Wireless Speeds

    Hello All,
    I just purchased a Linsys EA6200 AC router (refurb) to extend my existing wireless network. I have setup the 6200 as an access point using the Bridge Mode outlined in the Users Guide (automatic configuration). While I am able to connect to the Internet from the router wirelessly, my Internet speeds while connected are roughly a third of my max MBPS, I have a 55 MBPS connection and consistently get speeds around 14-20 MBPS with this router from a 10-12 foot wireless distance. I get full speed while wired in, however, as soon as I go back to WiFI I get a significant performance drop.
    Is there something that can be done to correct this? I am running the latest firmware and have set the 2.4G channel to 20mhz and the 5G channel to 40mhz while specifying a channel number with no increase in performance or speed. Any help would be greatly appreciated. Thank you.

    What Mfr and model is the main host router?
    Try single mode G or N or mixed G and N on 2.4Ghz and single mode N or Mixed on 5Ghz on the main host router?
    Channel Width set for Auto 20/40Mhz. 20Mhz can slow the wireless speeds down.
    Try setting a manual Channel to a open or unused channel. 1, 6 or 11. 11 for single mode N if the channel is clear. 13 for EU regions. Try channel 48 or 149 on 5Ghz.
    http://kb.linksys.com/Linksys/ukp.aspx?vw=1&docid=f2625b15a5d7454b8e7fafbe65d5aa63_4009.xml&pid=80&r...
    What security mode are you using? Preferred security is WPA-Personal. WPA2 Only. http://kb.linksys.com/Linksys/ukp.aspx?vw=1&docid=8ce9e83bd3784001aee72da7f1ef48e8_Changing_the_basi...
    http://kb.linksys.com/Linksys/ukp.aspx?pid=80&vw=1&articleid=19073
    Any 2.4Ghz or 5Ghz cordless house phones or WiFi APs near by?
    Any other WiFi routers in the area? Link> Use http://www.metageek.net/support/metageek-software-archives/ to find out. Use v3. How many?
    WMM Support must be enabled for single wireless N mode to function.

  • Speed drop page caused by Apple Time capsule????

    hi all,
    I have had BT infinity for about 2 months and prior to that I had regular 8MB broadband
    the first fews days were great getting about 30-40MB
    then the speed drops to below 1MB!!
    I have an apple time capsule which is connected to the BT Homehub via ethernet for wireless printing, NAS drive, speakers and back up of my apple hardware (no windows based hardware in the home)
    after numberous phonecalls to support this is what has happened:
    reboot openreach hub and BT homehub brings speed back up again
    First BT openreach engineers changed the white openreach modem
    Second engineer said that everything was fine but the Time Capsule was the cause..
    I have searched online and cannot see any reason as the time capsule is working fine.. it has never needed any re-boot etc etc
    please any advice would help
    Thanks
    Bhav

    You may be suffering http://community.bt.com/t5/forums/replypage/board-id/BTInfinity/message-id/51544 or a variant.  Also summarised in http://community.bt.com/t5/BT-Infinity/BT-Infinity-2-Home-Hub-3-Speed-drops-to-less-that-1Mbit-Uploa...
    It looks as if you will have to suffer occasional drops and reboots or similar (as in the threads) until BT fix the Hub firmware.  Unlikely to be the Time Capsule.

  • Slow 5GHz wireless running Yosemite.

    I've upgraded to Yosemite on my mid 2012 MacBook Pro Retina 2.3 GHz i7 and when I'm connected to my wireless ap using 5GHz it is miserably slow. I'm seeing various ping times to my router (anywhere from 5 ms up to 300 ms) and the good old screen flicker is back since I'm not on 5GHz. The screen flicker went away when I was able to use 5GHz exclusively. When I switch to 2.4GHz my speed and ping times are consistently between 1ms and 2ms - even when downloading large files.
    Apple - you broke my wireless!! Is anyone else experiencing this or better yet, has anyone solved this?

    I think I will reply to myself as nobody seems to be helping here and I see someone else has the same fault as me
           HH5 5ghz keeps dropping out. 2.4 ghz is stable.             
    I called up on Friday again. A supposed technical agent this agent then took remote control of my pC and merged the 2.4 and 5ghz signals back together depite my insistance that I want them seperate.
    When I told him this, I got told that "if 2.4ghz is working, why would I want to use the 5ghz band?" 
    Is this acceptable customer support BT? Along with previous suggestions that I just "change channels when speeds drop" as if this was an acceptable solution?
    I immediately asked for a supervisor and thankfully this guy was a bit more useful and split them back up. He changed the channel again (to 36 I think...I've lost track now having constantly changing from 36 to 40 to 44 them when speeds drop)
    I told this supervisor that the speeds improved but it will drop again in 24/48 hours. I was promised a call back in 48 hours
    Suprisingly just now I received my call back. After explaining the entire situation again, as well as explaining how a dual-band router works...(and I am no networking expert here!) They have acquiesed to my suggestion at the beginning and will be sending me a new home hub 5
    The complete lack of knowledge by the agents is disgusting to be honest. Questioning what I say, telling me to ignore faults, the supposed advice given as stated above
    And I must thanks for the complete lack of support and advice on here too. Does anybody in BT land have any technical knowledge at all. I'm seriously beginning to doubt it. I will update in a few days when my new hug arrives. Im not confident...

  • FileSharing Transfer Speed Drops after sharing internet connection

    Hi Folks
    Sometimes, when I copy files via FileSharing,
    the speed drops exactly to the max. upload speed my internet connection has.
    = instead of 12 MB/s I got 600 ~700 KB/s.
    I needed a bit of work to see this connection.
    But after a while, it changes back to normal.
    However, I did share the ethernet-internet-connection from one machine via WiFi (to surf with an iPod Touch).
    Could that initiate this problem? I believe so.
    Internet-Provider is cablecom, switzerland, zurich.
    I use a Zyxel Ethernet Switch to connect  two macs with the cablecom-modem (and together).
    So Idetached the cablecom-modem from the ZyXel Switch and restarted both machines.
    Now, the copy-action via filesharing has the expected full speed. (Just no internet, of course).
    After that I connected the Cablecom-Modem again,
    restarted (PowerOff/On) the ZyXel Switch,
    and tried the same again:
    Now the speed is slow.
    It seems that I really should NOT share the Ethernet Internet Connection with WiFi
    Won't do that anymore because I often copy files from one machine to the other and this slow transfer speed kills me.
    Why is that affecting the connection between two local machines?
    How can I reset this to "normal".
    I hope there is a way to do it in OS X instead of waiting until it sets itself  to "normal" from cablecom's side.
    [ -Despite the fact that I should use a wireless router- ]
    Is there any chance that this is an issue that OS X could resolve?
    Best would probably be: the local connection between two machines should not be affected by the provider in any circumstances.
    BTW: The cablecom-modem gives - via a ZyXel Switch - both computers unique IP's and they are reachable/visible from the internet.
    Greetings from Zurich
    Alain Burki
    If my English is bad
    please forgive me

    I am doing the same thing (have tried it occasionally over the past 6 months or so and cannot install Arch because of it)...sad panda.  The downloads start fast (up to 5MB/s), then when it gets to 49% it slows all the way down until it gives up and moves to the next mirror, repeating and repeating and repeating until finally it shows:
        core is up to date
        error: failed to update extra (download library error)
        error: failed to update community (download library error)
        :: There are 51 members in group base
        :: Repository core
        Enter a selection (default=all): error: failed to prepare transaction (could not find database)
    I've tried commenting out the XferCommand and using wget but that fails even worse.
    Thank you for posting this, I am glad I am not the only one experienceing this.  I was about to give up searching and post too.

  • Speed dropped last week and hasn't recovered...

    Hi,
    So my internet speed dropped significantly last week and hasn't recovered. I'm wondering if I need a manual intervention to reset my profile but hopefully someone more ADSL-knowledgeable out there can assist. Note as a professional software engineer I'm reasonably tech savvy, and have taken all the usual steps:
    * Router is now permanently plugged into the test socket, and has been for weeks, ruling out any internal wiring
    * Have tried different routers. I found the HomeHub4 to be unstable (needing to be factory reset regularly) so am currently running with a TP-Link N600 which has been rock solid since powering on weeks ago.
    * Firmware in router up to date, no viruses or spyware on any attached devices
    * Speed checks all the same regardless of device (phone, tablet, laptop) or connection method (wired, wireless 2.4GHz, wireless 5GHz)
    * Router resets made no difference
    * Until I switched to BT a couple of months ago I had rock solid 8 to 10 megs download (definitely starting to wish I hadn't switched from Sky, although they had their own set of issues!). In fact until a week ago BT's speed had been pretty reliable, sometimes as low as 8 megs download, but sometimes up to 14 megs download.
    Here are the stats from the router:
    I have also run various speed tests (including BT and BT wholesale) which all confirm the same results. Ping times around 45ms, download speed 1.95 meg, upload speed 0.75 meg. It has been many years since I have experienced such a low internet download speed, and it is only just capable of streaming low resolution content, HD is definitely off the cards!
    Looking at the router stats that SNR Margin looks high? I'm assuming my low sync rate is due to that? However I can't see anything that has changed physically in my setup in the last week. Could be exchange-side? Also note I did the "quiet line" test by calling 17070 (option 2). No obvious noise, just a very quiet digital hiss (I'll try to get an analogue phone and do the test again). However it sounded pretty clean to my ears.
    Finally samknows tell me my exchange is 1038 metres away and I should expect at least 6.5 meg download.
    So I'm a little bewildered why I'm now having to live with such poor download speed when for at least the last 4 or 5 years I've consistently had at least 6 meg download and usually somewhere between 8 and 10 meg (and as you can see from the router stats it was as high as 14 meg since the router was powered on).
    If I could upgrade to Infinity or Virgin cable I would do so in a heartbeat but sadly neither are in my street. I was hoping that with a few days of stable connection my speed would increase but this hasn't happened. Any assistance or advice on the above would be very much appreciated.
    Cheers,
    Tich
    Solved!
    Go to Solution.

    Hi,
    Many thanks - I had no awareness of "banded" profiles before! Sadly I just did a last-ditch router reset this morning to see if it would assist (before posting here). Previously it had been up for 5+ days with no resets, and a very stable (but slow!) 2 meg download speed. My current connection time is 0 day(s) 01:11:18 so obviously far less than 3 to 5 days. Willing to wait another 3 to 5 days to see if it improves, but I did that last week to no avail (kicking myself for not screen grabbing my uptime prior to resetting this morning now!).
    Is there anything else I should do other than wait another 3 to 5 days and post again confirming a continuation of the problem?
    Cheers,
    Tich

Maybe you are looking for

  • How do I connect my second PC or Laptop to main PC with router?

    I recently bought a new Desktop PC and had 2 laptops and now have an older Desktop PC! I also bought a WRT150 Wireless-N router to connect to the enternet with both my PC and laptops , to play games , share pictures betwin my PC with friends and fami

  • When will EK02 appear in the Sales Order?? For different planning strategy?

    Hi Experts, In our SAP system ,when you create a sales order with a material which planning strategy is 50 Planning without final assembly (MTO) , in the item detail screen , on the "Conditions" TAB, we will see condition type EK02 and its value. But

  • Cannot print from IE11 with adobe reader 9.4.2

    When we open pdf files within IE11 and try and print, the printer properties box becomes unresponsive. we need to crash IE to resolve it, but are unable to print. we cannot upgrade Adobe Reader as we have another application which doesn't work with a

  • Email Client error on startup

    Everytime I try to open a PDF file, it tries to open up MS Outlook and MS Outlook ends up giving me an error about it not being the default e-mail client. I know fixing that error is an issue with MS Outlook, but can I just completely disable the e-m

  • HT1655 how do you remove music from ipod shuffle?

    I'm so frustrated with the newer iTunes application.  Does anyone know how to remove downloads from the ipod shuffle? I'm not finding any instructions on iTunes or in the ipod shuffle manual.