5s Frozen During 8.01 Upgrade

I have a 5s and tried upgrading to 8.02 from 8.0. Now the phone it is flashing between the white background/black apple screen, a solid blue screen, then to solid back (repeat). I've connected it to my computer but nothing happens and iTunes does not recognize the phone. I have tried restarting the computer and changing out cords, but still no change. Any suggestions on what to do next?

Hi goleslie,
Try resetting your device: Hold down the Home and Power buttons at the same time and continue to hold them down until the Apple appears (up to 30 seconds). Once the reset is complete, the Slide to Unlock screen will appear. If the reset does work, go to Settings>General>About and check to see what Version number is showing. If it is not 8.0.2, hook your device up to iTunes on the computer you sync with and do the update from iTunes.
Cheers,
GB

Similar Messages

  • What is the best way to shut down an iMac that has frozen during a data transfer? The disk I was writing to will not eject. Stopping "copy items to" doesn't work either_ it is frozen as well. Is there a way to force eject the disk so I can shut down?

    Some more information on the above: OS: 7.2
    1. None of the shutdown commands would work so I held the power button down and received a prompt that asked if I wished to force eject the drive, I selected
    the force eject and then shut down.
    2. Just recently I installed an eSATA _ Thunderbolt_ port multiplier compliant PCIe card (Seritek Q6G) into a thunderbolt external chassis (OWC Helios) (seritek Q6G).
    This freeze data transfer also happened when I connected a Firmtek 5PM external tower to the iMac via thunderbolt cable.
    The driver for the seritek Q6G was installed in the iMac previous to connection of any of the devices.
    Both external towers mount ok on the iMac but have frozen during data transfer.
    The initial freeze was with the Firmtek 5PM which is (JBOD)_ I thought that might have had something to do with the freeze_ it being JBOD_ so next I tried the Mercury Elite AL Pro Q2- which is formated in RAID 5. But then froze too.
    Anybody have any experience with this?
    Maybe I need another driver?
    Or maybe some update to my OS?
    Any suggestions welcomed.
    Thank you

    Hello BDAqua, thanx for the suggestions. Before I saw this reply I tried to first quit the finder and then to relaunch the Finder but that resulted was a blank gray screen.
    In the end I ended up having to power down the iMac.
    Fortunately the RAID array that was "active" seems to be fine and also has a firewire 800 connection so I can use it_ just not with thunderbolt until this issue is solved.
    I'm going to check in the Applications>Utilities>system log to see if any clues are evident_ thank you for the suggestion.
    PS: Nothing of note was obvious as a root cause in the Activity Monitor though.
    hmmm....I was told that the Helios and seritek card were compatable and that the Helios didn't require any drivers..it will be a drag if there isn't an easy fix for this since this new PCIe card from seritek is the first to offer port multiplier compatibility for eSATA to thunderbolt...since they are both new I'm hoping that an OS upgrade will be the fix (presently7.2)...we shall see.

  • HT5313 it seems the comupter is frozen during the update of OS X Lion TO v10.7.5

    it seems the comupter is frozen during the update of OS X Lion TO v10.7

    Antony D'Emanuele wrote:
    Can anyone provide me with a link to the OS X bash Update 1.0 for OS X Lion Server v10.7.5, apparently there is a specific update. I have searched the Apple site without success, I have found the Mavericks, Mountain Lion and Lion version but not the server versions (which do exist, see Apple security updates)
    With Lion and later there is no such thing as a server version of the operating system, this is unlike the previous Mac OS X 10.6 aka. Snow Leopard which did have a specific server version of the operating system.
    So, in reality one only needs Lion, Mountain Lion and Mavericks versions. The server software is merely an application these days.

  • What production downtime should we expect during the technical upgrade?

    Hi,
    We are planning for a Upgrade from 4.7 to ECC 600, i need to know how can we able to calculate the downtime for the upgrade?
    Thanks.

    The production downtime is the period during the technical upgrade when the production system is out of service. The downtime period depends on various factors such as hardware power and size of the tables to be migrated, and is therefore contingent on each individual situation. SAP upgrade technology provides you with two strategy options: downtime-minimized strategy and
    Resource-minimized strategy.
    Characteristics of the downtime-minimized strategy:
    Shorter production downtime
    Parallel operation of production system and shadow system that enables the execution of as many upgrade tasks as possible during the uptime of the production system
    Higher demand on system resources
    Characteristics of the Resource-minimized strategy:
    No parallel operation of production system and shadow system
    Lower demand on system resources
    Increased production downtime
    SAP recommends that you perform the upgrade using the downtime-minimized strategy if a short production downtime is required.
    For more details refer
    http://service.sap.com/instguides
    http://service.sap.com/erp
    http://service.sap.com/erp-inst
    Hope this will help you, do revert if you need further details.
    Best Regards,
    Sachin.

  • DB upgrade during a Solaris upgrade using live upgrade feature

    Hello,
    Here is the scenario. We are currently upgrading our OS from Solaris 9 to Solaris 10. And there is also a major database upgrade involved too. To help mitigate downtime, the Solaris Live Upgrade feature is being used by the SA's. The DB to be upgraded is currently at 9i and the proposed upgrade end state is at 10.2.0.3.
    Does anyone know if it is possible to do at least part of the database upgrade in the alternate boot environment created during the live upgrade process? So lets say that I am able to get the database partly upgraded to 10.2.0.1. Then, I want to run the patch set for 10.2.0.3 in the alternate boot environment and do the upgrade of the instance there too so that when the alternate boot environment is booted to the primary boot environment, I can, in effect, just start up the database.
    That's sort of a high level simplified version of what I think may be possible.
    Does anyone have any recommendations? We don't have any other high availability solutions currently in place so options such as using data guard do not apply.
    Thanks in advance!

    Hi magNorth,
    I'm not a Solaris expert but I'd always recommend not to do both steps (OS upgrade and database upgrade) at the same time. I've seen to many live scenarios where either the one or the other has caused issues - and it's fairly tough for all three parties (You as the customer, Sun Support, Oracle Support) to find out the end what was/is causing the issues.
    So my recommendation would be:
    1) Do your Solaris upgrade from 9 to 10 and check for the most recent Solaris patches - once this has been finished and run for one or two weeks successfully in production then go to step 2
    2) Do your database upgrade - I would suggest not going to 10.2.0.3 but directly to 10.2.0.4 because 10.2.0.4 has ~2000 bug fixes plus the security fixes from April2008 - but that's your decision. If 10.2.0.3 is a must then at least check Note:401435.1 for known issues and alert in 10.2.0.3 and for both cases the Upgrade Companion: Note:466181.1     
    Kind regards
    Mike

  • I'm having trouble with downloads of Aps. I have several that have frozen during the download. I can't delete them and resetting my iPad or trying the airplane mode has not helped. Any ideas?

    I'm having trouble downloading Aps on my iPad . I have several that have frozen during downloading and I can't delete them. I've tried resetting my iPad, airplane mode and going through iTunes and Aps store, nothing has helped. Any ideas?

    I'm having a similar problem, but different circumstances. Someone gave me their iPod nano to load with tunes. I, myself, don't own an iPod, and the flimsy booklet that came with this device is pointless -- no real info. Anyway, once it was charged, I chose tunes from my library to upload to the iPod, but the entire library began to load (not just the checked selections). I made several attempts to resolve this, including an attempt to restore the iPod to its original settings. Unfortunately, now the computer and iTunes will not recognize this iPod (when iTunes is open and iPod is connected, iPod does not appear in source list, and desktop only reads the device as "iPod", as opposed to what it was originally reading it as) and I can't even get back to the part of iTunes that asks me if I want to restore the iPod. Do I have to bring this to an Apple store, or is there anyone out there who can tell me how to resolve this? I tried the "5 R's" recommended by Apple, but they don't seem to work.
    mich solo

  • HT1600 My apple tv seems to have frozen during an update. what do i do?

    My apple tv seems to have frozen during update. What do I do ?

    Hi iphoneozqld,
    If your Apple TV appears to have stopped updating, I would recommend a restart, and if issues continue, a restore:
    Apple TV (2nd and 3rd generation): How to restart your Apple TV
    http://support.apple.com/kb/ht3180
    Apple TV (2nd and 3rd generation): Restoring your Apple TV
    http://support.apple.com/kb/ht4367
    Cheers!
    - Ari

  • New macbook pro has frozen during windows migration and can,t operate, new macbook pro has frozen during windows migration and can,t operate

    trying to set up new macbook and has frozen during the process of using windows migration, now can,t get it to go

    Try just holding down the power key to power off - you may have some files that migrated, maybe, maybe not.
    You won't hurt anything - just have to try MA again if it doesn't work the first time.
    Clinton

  • HT6114 My iMac seems to have frozen during the update- how long should I expect the update to take? The 'installing software update' bar is still showing itself working but has been stuck in the same position for over an hour.

    My iMac seems to have frozen during the update- how long should I expect the update to take? The 'installing software update' bar is still showing itself working but has been stuck in the same position for over an hour. Any thoughts?

    Update2: There is something very wrong with wireless on mountain lion recovery. I don't know what the problem is, but this link may explain:
    http://osxdaily.com/2012/08/10/os-x-mountain-lion-10-8-1-beta-released-for-dev-t esting-may-include-wi-fi-fix/
    Wireless recovery would start out with over 25 hours estimated and kept on failing. It turns out to be a two step process of downloading a few Mbytes then a 4Gbyte .dmg file, but I couldn't even download the Mbyte file. I bought the thunderbolt to gigabit ethernet adapter, plugged it in, restarted recovery and download of a little more than 4Gbytes took less than an hour. My limiting factor was probably comcast home internet rate of 12Mbps. The wi-fi wireless connection should be able to do over 100Mbps, so wireless shouldn't be much slower than wired, except wi-fi wireless is broken. Now that ML is installed and updated, wi-fi seems fine now, as I am using it right now, but I haven't tried downloading a big file yet.
    Don't use wi-fi wireless for Mountain Lion recovery.

  • Error during in place upgrade of IPAM (W2k12 to W2k12 R2) - any solution yet

    After an in-place upgrade of an IPAM server from W2k12 to W2k12 R2 and during the IPAM upgrade from ver 6.2.0.1 to ver 6.3.0.1 I receive an error:
    Failed to convert Schema
    The given key was not present in the dictionary
    Please restart the wizard to update the IPAM server
    The error.log at %windir%\WID\log has an entry of:
    Login failed for user 'NT AUTHORITY\NETWORK SERVICE' Reason: Could not find a login matching the name provided
    I've installed sql express mgmt studio on another lab IPAM server and don't see any db server logins for Network Service so it's not a surprise that the login would fail.
    I have seen other mentions of others getting this error with the reply that this is a known issue and a hotfix is on the way. Is this a known issue and is there a hotfix - or some other fix - available.
    In a related note, is there any official technical documentation re: the IPAM upgrade process such as an Operational Guide or something similar? All I have been able to locate are marketing type of documents that extol the new features in IPAM ver 6.3.0.1
    but I haven't located any technical documentation.
    Thanks

    That's sadly funny. The hotfix leads to a different error. Thankfully I'm not an end user of IPAM - which seems to me not ready for prime time and not worth the trouble. The overlapping scopes was one of the issues for me that was preventing
    a successful upgrade in my dev environment, which is nonsensical since an overlapping scope is a failover scope which is one of the selling points of wk212 r2 dhcp which IPAM is supposed to work with. As I recall you can't have reservations either.
    My prod environment, I didn't have any overlapping scopes and got rid of all reservations and the upgrade still failed so I ended up removing the IPAM feature and doing a fresh install using the WID db and then migrating to SQL using move-IpamDatabase
    (I couldn't get using a remote sql db to be seen during a fresh install thus the WID then migrate).
    Hopefully, the end users will tire of the limited functionality of IPAM and it'll fade away here and I won't have to deal with it much longer. 

  • Itunes has frozen during the ios update

    my phone and itunes has frozen during the ios update.  how do i resolve this?

    Hello LAUANS01,
    After reviewing your post, I have located an article that can help in this situation. It contains a number of troubleshooting steps and helpful advice concerning device issues:
    iOS: Not responding or does not turn on
    http://support.apple.com/kb/TS3281
    Thank you for contributing to Apple Support Communities.
    Cheers,
    BobbyD

  • How do I recover apps lost during a ios5 upgrade?

    How do I recover apps lost during a ios5 upgrade?

    Redownload them from the App Store or resync them from your computer.
    (64014)

  • HT1414 omg phone frozen during sync, will not turn back on and itunes wants me to restore but unsure if all my precious photos etc have been saved and if so where they are?? I cannot turn phone back on its frozen with itunes icon picture on screen!! help

    omg phone frozen during sync, will not turn back on and itunes wants me to restore but unsure if all my precious photos etc have been saved and if so where they are?? I cannot turn phone back on its frozen with itunes icon picture on screen!! help

    Once the Device is asking to be Restored with iTunes... it is too late to save anything...
    To minimise loss... Connect to iTunes on the computer you Usually Sync with and Restore from the most recent Backup...
    http://support.apple.com/kb/HT1414
    Restore from Backup
    http://support.apple.com/kb/ht1766

  • Precautions to Be Taken  With Oracle 10G During Solaris 10g Upgrade

    Hi
    We are upgrading our servers from Solaris 9 to Solaris10. Could anybody please help me in understanding the
    precautions that i should be taken from the Oracle 10g DB perspective during the Solaris upgrade.
    Regards
    Pavan

    Pavan,
    you'd better post your question in a different forum -> Database -> Installation
    Database Installation
    as this forum deals with migrations of foreign databases to Oracle.

  • My mac is frozen at launch following upgrade to OSX help?

    My Mac has frozen on launch following upgrade to new OSX software, what can i do?

    At what point does it freeze?

Maybe you are looking for

  • How to back up a back up

    I have a Macbook. I have iTunes. I have my iTunes folder and contents stored on an external (Lacie) hard drive. I want to be able to back up that external (Lacie) hard drive and my mac using Time Machine to a separate external hard drive. At the mome

  • Using roadmap and select-options

    I'm new to abap web dynpro, i'm using a roadmap with 4 views. This is working fine but, when I try to use select options in view1 they don't show. When I set view1 as default view the select options are working fine. this is how my current web dynpro

  • Run Time error in ALV report

    Dear friends When I try to run the following code, I keep getting a message that says "The field "GT_FIELD" specified here has a different field type.". I have run this in many occassions and it has worked before. I would appreciate if some one can h

  • The files are on a volume that does not support Trash- Mountain Lion CC-Lr5

    I'm trying to delete files in Lr5-CC and I'm running Mountain Lion My files are on an external portable HD.  I'm getting a message that says: "The files are on a volume that does not support Trash." Does anyone know why this happens and how to fix it

  • Is there a way to password protect just email?

    I'd like to be able to set my mail to a password, so that if/when someone else is using my phone they can't read my email. I want the easy access of it on my main screen, but I want to be asked to enter a password before reading it. I don't want to l