5si/mx LaserJet problems connecting to new computer

I have a LaserJet 5si/mx with a JetDirect 10Base-T card connected through a router. I am trying to connect it to a new iMac, but the computer won't see it. My internet connection is through the same router and it works. Any thoughts?
Thanks for your help.

Of course there is a USB connector for the ipod mini! http://store.apple.com/1-800-MY-APPLE/WebObjects/AppleStore.woa/wa/RSLID?mco=7E4 EB91E&nplm=MA591G/A . That will take you to the apple website where you can purchase the cord. I don't know why it dosent list the ipod mini under the compatible list maybe because its a bti older but thats the same cord i got with my ipod touch and it works with my mini aswell.

Similar Messages

Problems transferring to new computer. Is Win 8.1 problem?

Problems transferring to new computer. Is Win 8.1 problem?

Hello wjmonti
What issues are you having for moving your music to a new computer? Check out the article below for different ways to move your music to your new computer.
iTunes: How to move your music to a new computer
http://support.apple.com/kb/HT4527
Regards,
-Norm G.

Problems connecting in new place

I recently moved to a new place with a new wireless network. My Airport was working great at my old place so I'm thinking I'm just having connection problems. First my computer couldn't "see" the airport so I plugged it into my computer with an ethernet to set it up. My wireless uses a WEP but only has a 10 digit passcode. I tried to select WEP but it said I needed a minimum of a 13 digit passcode. I tried a few other things and a couple times actually got a green light on the airport and the utility to say it was communicating fine. But then when I would unplug the ethernet it would all be gone. Also, very frustrating that it kept changing my network info in my computer to join the wireless network so I kept losing my internet connection and would have to deal with that. UGH!!! What am I doing wrong?!? Any help or walk-throughs would definitely be appreciated as I am getting VERY frustrated!!!

Hello MichelleVee. Welcome to the Apple Discussions!
I recently moved to a new place with a new wireless network.
Based on one of your comments, I assume that you just want to use the AirPort Express Base Station (AX) to join this wireless network for iTunes streaming ... correct?
My wireless uses a WEP but only has a 10 digit passcode. I tried to select WEP but it said I needed a minimum of a 13 digit passcode.
One of the problems with WEP is that the actual standard relies on a 10 character HEX key for 40bit WEP and a 26 character HEX key for 128bit WEP.
In order to make things easier, vendors use certain algorithms to convert simple alphanumeric passwords (or passphrases) into HEX keys, thus enabling the use of simple easy to remember WEP password rather than lengthy HEX keys. The problem is that different vendors use different algorithms to generate the HEX key and therefore an ASCII password on an AX will be hashed differently on a non-Apple client and vice versa.
Please check out the following Apple Support article to see if it will help: AirPort, Time Capsule: Joining an encrypted wireless network

Installed LaserJet M1212nf MFP on new computer. Prints but wont scan.

I just installed Laser Jet M1212nf MFP printer on a new computer. It installed itself and prints fine. It wouldnt scan so I downloaded the software from the HP website. It still doesnt scan. I don't know what to do next. My computer doesnt pick up the fact that there is a new scanner.

Solved my own problem. the name of the laserjet showed up as 1210 instead of 1212 on my computer. It still isnt working properly, but at least the new computer recognzes the printer. Onto the next problem..

Cannot connect a new computer with vista

Hi !
I have the wireless router WRT54G and I am currently using a computer with Windows 2000 to connect to the router. The router works perfectly with this computer. However, I bought a new sony computer with windows vista. This new computer recognizes the router and is connected to it. However, when I open the explorer and cannot go to any web page. Can anybody help me out with this? Thanks!
Matias

ohhh..too complicated... you dont need to customize the settings if its already connected to the network.
>>If its already connected, make sure its getting an ip address coming from the router with a valid dns servers.
>>Try to ping router's default gateway and check if its communicating with it.
>>ping a website *(ex. ping yahoo.com)*. check if its getting replies.
Its just a simple and basic networking procedure.
xavier.
PROBLEM •► Reconfiguration of the Printserver
HISTORY •► Working fine before
RELEVANT NETWORK INFO:
•► Wired: 3 dt OS: xp
Wireless:1 lt built in OS:xp
•► Linksys Model#2: wps54g v
Serial Number: si4005802038 Warranty Expiresec 2008
•► Linksys Model#1: wrt54g v1.1
Serial Number: cdf20c902024 Warranty Expires:Jan 2007
TROUBLESHOOTING:
Specific Step-by-Step procedures taken with Customer. USE DETAIL.
█► CLient confirmed to me that the internet connection is working behind the linksys router and the only device left for reconfiguration is the printserver.
• Wireless settings needs to be check and reconfigured
• Successfully Charged
█► Access ui of the router
• EDit wireless settings [ userdefined ssid, channel 11 and wep is disabled ]
• Hardwire Desktop to the router - printserver - printer.
• Print the ip address - 192.168.1.103
• Syncronize wireless SSID - set static ip, subnet and gateway
█► Powercycle the printserver and the router
• Status is ONLINE
• Configured for LPR Printing - successfull
• Able to print wired
█► POwercycle the printserver and the router
• Able to Print wirelessly !!!
CLOSING REMARKS:
Mentioned Disclaimer: no
Mentioned 7 days: yes
Customer agreed to close the case: Yes
Customer agreed issue was: Resolved
Customer satisfied: Yes

Connecting a new computer through linksys router

I have a WRT54G wireless router ... I want to connect a new laptop through it ... but I need either a network key or a password ... cant locate these .. can anyone help?

To get network key, connect your computer to one of the four ports on router using ethernet cable. Open setup page of router by typing http://192.168.1.1 in browser’s address bar, and typing password as "admin" and no user name. Use your password if you have changed it earlier. Go to wireless tab. Go to wireless security sub-tab. If security mode is wpa or wpa2 note down passphrase/shared key, if security mode is WEP note down wep key number 1. This will be your network key

I have a brand computer and I have an ipod nano generation 7. How do you download your music from itunes to your ipod. I did it on the old computer but am having problems with the new computer. Please help. Thanks

Please help. I have a new computer and an ipod nano 7th generation. I am having problems getting my music from Itunes library to my ipod. How do you do it?

Hello Sandy
You can transfer the purchases from your iPhone to your new computer by following the steps in following article.
iTunes Store: Transferring purchases from your iOS device or iPod to a computer
http://support.apple.com/kb/ht1848
If you have music that was not purchased from the iTunes Store, then you will not be able to move it from the iPhone to your computer. Instead you will need to follow the steps in this article that helps with moving the library from the old to the new.
iTunes: How to move your music to a new computer
http://support.apple.com/kb/ht4527
Thanks for using Apple Support Communities.
Regards,
-Norm G.

Problems booting my new computer

Hello!
I have a real newbie problem that I hope someone could help me with. I have just started up my new computer with P4M890M mothercard but all I get is the message "reboot and select proper boot device or insert boot media in selected boot device and press a key". I was equipped with a CD "drivers and utilities" from MSI but somehow the computer cannot read it. I have tried to access the BIOS setup to see if it maybe is looking for a floppy (with TAB during start up) but even that does not work.
Could someone please help me?

Thanks for your help!!
I have set the SATA as RAID and enabled SATA BIOS Execute but all it does is giving me the messages "media test failure " and "exiting intel PXE ROM" followed by the same old boot message. I also get the message that I shouldn´t use PROM creation operation if I install LINUX partion RAID driver.
What am I doing wrong here?

Speakers won't connect to New computer

I have a new computer and I'm using my speakers from my old computer and when put it on to the computer it doesn't seem to work I check on my control panel to see if its the volume problem but it says that there isn't any audio device linked so whats the problem.. Information that may be needed:Speaker System 2.0 SBS260 Windows XP

What are your specs on your new PC? Does your soundcard show up in Device Manager?
Dell XPS 600 Intel Pent D 830 3.0ghz
Chipset- Nvidia nForce4 SLI Intel Edition
WD 60gb HD
2gb Ram
DVD-ROM
DVD-RW (Plextor 760A)
Creative XF-I Extreme Music
Logitech X-540 speakers
EVGA 7950GT
Dell 2007WFP (I-SPS panel)
Win XP SP2
BIOS A

Problem printing with new computer

Hello...
I have a new iMac (10.7.3) that I'm using with my older printer...Brother MFC 8440. I downloaded and installed the latest driver for 10.7. However, when I hooked up the printer via USB it did not see the printer, therefore, I can't print. I used the same cord on my old computer and it recognized it. Is there something different about the USB connection on the new computer?
Thanks...

Maybe resetting the printing system will help:
System Preferences>Print & Scan, control+click or right click on a printer on the left (or in the white space where they would normally be listed) and select 'reset printing system'. All printers will be deleted and need to be added again.
Are these the latest drivers you downloaded and installed from the Apple site? Brother Printer Drivers 2.8.1

No connection to new computer

we have a wireless router and i just bought a new computer and i have internet to my other 2 pc's and my laptop but i cant get internet to me new computer i have a wrt150n router Can anyone help me out please

hi.
pls. state if your new pc is w/less or wired.
if it's w/less do you have your rtr's w/less settings like your network name or ssid & if w/less network is secured do you know whats your security code or password for w/less network?
if it's wired, just connect it to any numbered ports on the rtr via ethernet cable.

Lost music off ipod when connected to new computer....

Found an ipod (never had one before and don't know much about it). Plugged it into my new computer, and all the music on the ipod disappeared. Didn't show up in my iTunes library. Found some of the music in My Computer, but not all music was listed there. I thought all songs had been deleted, but iPod shows most of it's memory is still being used. Question #1: Why are only some of the songs showing in My Computer? Question #2: Is there any way to retrieve all the "lost" music? Question #3: Why is iPod memory so full if I can't see any music on the iPod? Sorry to be so clueless!

This ipod was lost at a ski resort and we gave the owner 2 years to inquire about it, which he never did. After a customer has been contacted about a lost item and doesn't reply that season, the item is donated or given to employees to pick and choose from. We gave him 2 years.
You would be suprised how many ipods, cell phones, car keys, etc. are lost and never inquired about.
I reset the ipod to it's original factory settings and have a buddy who is going to download the songs from his ipod to mine. Since we like the same type of music this will work best for me since most of the music originally on the ipod was crap anyway.
Thanks for you snide comment instead of answering my question Chris.

Problem connecting windows 7 computer to ezxs55w switch

I've got a simple wired network with a ezxs55w switch uplinked to a befsr41 router. My win 2K system and a canon network printer work fine on the switch, but a new dell running windows 7 does not make a connection when plugged into the switch, but it does work when plugged into a port the router. When plugged into the switch there are no lights on the computer nic. The switch seems to recognize something as all three leds for the port come on but turn off immediately and then repeat the process every few seconds. The cables and ports all work ok with the win2k computer. Ideas?
Solved!
Go to Solution.

my first try - didn't work, also 100/half dp failed. 10 works either way. this is a faithful but v2 hardware switch - as we get older the timing seems to go... Clearly the move to gigabit transmission nic's is showing problems with timing for auto sensing in earlier switches etc. Another of those things that would always work passes on. Good thing in w-7 is you can change settings, click ok, and immediately see by the leds if it works or not. Just for interest it would be neat to see what the difference (in a very condensed form) between the router ports and the switch port logic/timing is for us geeks. Meanwhile my multi-gigahertz quad core boat anchor sees the world at 80's speed, but there's a birthday coming up -

IPad connection to new computer. 2 options: 1) set up as new iPad, 2) restore from (non-existent) backup. Will option 1) wipe all my data, setting

How do I connect my iPad to iTunes on my laptop (not done so before) without losing apps, settings & data. Option 1 is the only one that I can do as there is no backup, but option 1) sounds like it will wipe everything and set iPad up as factory-fresh device?
I need to connect to upgrade to ios8 as there is insufficient memory on the iPad to download the update files.
Thanks
Stephen

It will wipe everything from your device. You can transfer any iTunes store purchases (music, apps, etc.) using the instructions in the article below. However, you need to make sure that you import your photos before doing the "Set up as New":
iTunes Store: Transferring purchases from your iOS device or iPod to a computer
PHOTO IMPORT IOS TO MAC/PC
Best of luck,
GB

Problems connecting my new macbook to our wireless network

Hello!
I recently received my new macbook and have tried connecting it to our WEP encrypted network that has been set up on a PC and runs from a Netgear DG834 router.
I have tried setting up a new network on my macbook, inputting the WEP (hex)key. I have also tried to put a $ before the key, but can't.
We have added the macbooks mac address to our network.
Is there anything else I can try? Has anyone had a similar probelm and found the answer?I am desperate!
Thanks
eva
macbook Mac OS X (10.4.8)

If you can, try disabling WEP and then trying to connect. This will tell you whether your problems are because of WEP or something more fundamental. The new C2D macbooks seem to have a problem whereby they won't connect to some third party access points.
If you've got an older mac around, try to connect with that - this should also help determine where the problem lies.
If you can, it might also be worth checking if the router is updated to the latest firmware.

5si/mx LaserJet problems connecting to new computer

Similar Messages

Maybe you are looking for