5th gen ipod does not connect to mac desktop or itunes

My ipod does not connect with my desktop or itunes (ie when I plug the ipod in using the original USB cable nothing happens--no charging no recognition that it has been connected). My nano does work with the same cable so I know it's not that. I've followed the support instructions resetting, downloading the latest software and restarting. I cannot, however, restore since the first step of the instruction is to connect the ipod and wait for it to show in the source list in itunes. It is also interesting that when I use the car charger the ipod does charge and shows the charging icon.
Any suggestions?

I guess i can lend my voice to the conversation. my ipod "locks up" when i connect to my computer also. i just updated itunes and have not been able to connect. there is no ipod folder on my computer when i search through ""finder". i have to "reset" it after i disconnect to continue to play it. i have done everything short of "restoring" due to i have over 3000 songs and i'm unable to back up. the manuel refers to a disk to update. i can only play songs, and recharge. need help to.

Similar Messages

  • TS1369 why doesnt my 5th gen ipod nano not connect with windows 8?

    why doesnt my 5th gen ipod nano not connect with windows 8?

    Doublechecking. Have you also tried a complete uninstall of both iTunes and all the other related software components and then a reinstall? If not, try the instructions from the following document:
    Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8

  • 5th Gen Ipod does not show photo tab under preferences

    I am trying to get pics onto my Ipod. The ipod tutorials suggest going to a photo tab which I do not have. I can not update the Ipod because Itunes 7 says that Ipod is already up to date? Is anyone having this problems?
    5th gen ipod   Windows XP   Itunes 7

    The ipod tutorials suggest going to a photo tab which I do not have. I can not update the Ipod because Itunes 7 says that Ipod is already up to date?
    can you check something for me? what icon is showing up in the itunes sourcelist? is it a wee picture of your 5th G, or does it look quite different?
    what version of the firmware is being cited in the "summary" tab you see when you select the ipod in the sourcelist? is that the same version that you see in the "About" screen on your ipod?
    Where's the iPod About screen, and what's in it?

  • 5th gen Ipod does not load video on Itunes

    My 5th gen color Ipod recently began having problems when I updated Itunes software.
    The video that is on my Itunes library does not transfer when synced to Ipod.
    Video on Macbook plays but is not recognized by Ipod and does not load.
    Any help is appreciated.

    Check your settings for sync. The default for videos are that only unwatched videos get synced.

  • Ipod does not mount onto Mac OSX

    My click wheel Ipod does not mount to my desktop nor to my Itunes. I tried resetting it but I cannot restore it because it does not mount. I also cannot open up the Ipod Update software file, it tries to open with Appleworks, then stops.

    I have fixed my iPod blank/black screen problem (i suspect black screen for iPod5G black model, and white screen for the white model) On Black Friday, which was yesterday, after I upgraded the newest releases on QT/iTunes602/osx1044/iPod11, iPod didnt do anything, no mounting to my iBook/iMac/G5PwrMac. Hard reset didnt work, etc.
    I decided to fix the iMac permission with local drive DiskUtility, then reboot the iMac with the Original Tiger iMac DVD software restor disc which comes with the desktop then repair the volume with this method. Then I reboot and then I did an extended hardware test with the same disc, but with the Hardware test disk (which is the same as software restore DVD, iinstead of holding down the c key, hold down the option key when reboot with the disc)
    After all that, iMac restarted and recognize my 5G iPod 60GB, I quickly restore the whole iPod to manufacture setting, hopefully you have all the info backed up somewhere, I did a clean defractmentation, and then used the iPodUpdater from 11-17-2005 to restore the iPod 1.0 version.
    Now I am done and my iPod works like new. Go try it guys... Good luck!

  • HT203175 My Ipod does not sinc with all of my Itunes library, only the first few albums. I recently changed my operating system to XP from Vista, which was a pain, and due to my fault had to reinstate most of my albums and all of the playlists.

    Ipod does not sinc with all of my Itunes library, only the first few albums. I recently changed my operating system to XP from Vista, which was a pain, and due to my fault had to reinstate most of my albums and all of the playlists. How do I get my Ipod to sinc fully when I access Itunes?

    Recover media from iPod
    See this post from forum regular Zevoneer for options on moving your iPod data back to your computer.
    tt2

  • TS1474 I have already reset my ipod shut it off as well. I have upgraded Itunes and the ipod does not want to show up on Itunes anymore. It used to before but now it doesn't. How do I solve my problem?

    I have already reset my ipod shut it off as well. I have upgraded Itunes and the ipod does not want to show up on Itunes anymore. It used to before but now it doesn't. How do I solve my problem?

    See:
    iOS: Device not recognized in iTunes for Windows
    I would start with
    Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
    or
    Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
    Run this to help if it identifies the cause
    iTunes for Windows: Device Sync Tests
    Have you tried on another computer to help determine if you have a computer or iPod problem?

  • My iPod does not mount to the desktop!

    Under my system profile, my computer recognizes that my iPod is present, yet it does not mount to my desktop or iTunes. What could be wrong?

    Good, I'm not sure if this will work, but it's worth a try.
    Here's a way to do it without Terminal.
    In finder, go to the "Go" menu and choose "Go to Folder". In the box that opens, type "/Volumes". When that opens, you are looking at the devices mounted to the operating system. If no iPod is there, then even though the system sees the device, for some reason it can't mount it at all.
    If you have permissions problems, then you might have to enable the root account. If that's the case I can give you directions on how to do that, but I don't think you'll need it as long as you are an Administrator of the computer.
    If that folder opens, and you don't see your iPod, let me know. Even though I have seen this happen a bunch of times, I'm having trouble recreating it at the moment, so I can't test to see if I can manually mount it. I'd like to try to give you directions to do so.
    Otherwise, if you see an entry for you iPod, try clicking on it and see if you get in.
    Jeremy

  • 5th gen iPod will not unmount

    I have a 5th gen iPod which I use to backup other data files. The iPod setting within iTunes allow for desktop mounting of the iPod. When I attempt to unmount the iPod from the desktop (with iTunes closed) and only the finder (and dashboard) running, I get a message indicating that the iPod cannot be unmounted because it contains files that are still in use. As mentioned above, the only applications running are the Dashboard and Finder. I do have one widget that displayes hard disk usage information, and I have used the Activity Monitor to quit the process just before attempting to unmount the iPod but the unmount status does not change. Is there something else that I should be disabling before attempting to unmount the iPod?
    Power Mac G4   Mac OS X (10.4.4)   iPod 5th gen, iPod nano

    I can't really explain why but sometimes it happens, to mine too, normally if you try unmounting again it should unmount, if not, the next time you have your iPod mounted on your desktop, do a Repair Permission from Disk Utility (Repair Permission on your main HD, not your iPod)
    After that restart again, your problem should go away.
    Cheers

  • 5th Gen iPod Video not syncing all video podcasts

    My 5th Gen iPod video is not syncing all of my video podcasts.
    I did specify in the settings to sync all videos, but for some reason it only places 3 of each on the iPod. This is using the latest version of iTunes, OS X 10.4.8, and iPod up-to-date.
    This did work fine with the previous version of iTunes and only seemed to happen since the "upgrade".
    I've tried restoring the ipod - didn't work
    Reinstalled iTunes - didn't work
    Rebooted system - didn't work
    Undocked/Redocked iPod - didn't work
    Please Help.

    Assuming you're running iTunes 7, connect the iPod and wait for it to appear in the iTunes source list. When it does, click on it, and click on the 'podcast' tab. Make sure it is set to sync all podcasts. Check the 'video' tab as well.
    iTunes 7 included several new options for setting just how the iPod will update in iTunes. So, it's a good idea to go through them and make sure they're set exactly how you'd like them to be.
    Hope this helps
    CG

  • Known issue: 5th gen ipods do not work reliably with 10.6.1 (snow leopard)

    I just got off the phone with Apple support - there is a known issue preventing 5th gen ipods from connecting to Snow Leopard computers.
    I can confirm that it's a 10.6 issue - everything worked fine on 10.5.8 with iTunes 9, but right after the upgrade, no connect (not even in Disk Utility). Apple's working on a fix, but no ETA yet. My 1st gen touch works just fine.
    If you attempt to connect, it'll hang Disk Utility and may require a hard-boot to reset everything.
    So we just need to be patient.

    yeeahhhhh... I just plugged my ipod classic 5th gen, 30g into my brand new macbook pro... and it doesn't show anything up. Didn't even aweknowledge the ipod as a device. and worst of all... it said it was connected so i couldn't take it out but i had to since it wasn't doing anything so i unplugged it and now... it froze...
    If i reset my ipod or wait till the batteries run out and then connect it to my pc. will it work still?

  • 5th gen ipod won't connect to usb 3, is there a fix?

    I have an ipod video (5th gen), and it won't connect to my new asus laptop since it only has usb 3 ports (I don't care if it will charge or not, I have a dock), my question is whether it could potentially connect to my computer so I could sync it if I use a usb 2 hub or something similar. My ipod recently formatted itself when it forced a reset, so I have to get my music all back. Anyone know a fix to it? Thanks for any help you guys can give me, really driving me crazy not having music to listen to when I'm out...

    You did install the latest version of iTunes on your new computer, correct?  Installing iTunes is how the software needed for iPods to be recognized as iPod gets installed.  Otherwise, Windows sees it as a generic device.
    https://www.apple.com/itunes/
    If the iPod is recognized by Windows, but not iTunes, you should go through this trouble-shooting document.
    iPod: Appears in Windows but not in iTunes - Apple Support
    FYI - My 3rd gen iPod from 2003 works fine with the latest iTunes; there's no such thing as an iPod that is too old. 

  • 5th gen iPod Classic not recognized

    Hi, I have a 5th gen iPod classic 30GB that my friend gave to me a few months ago. It was recognized on my computer and itunes at the start and I was able to sync and perform all the needed tasks. I recently had to reformat my computer and now the ipod isn't recognized by USB, or in itunes. The Device manager for Windows XP SP3 says "Unknown Device" and that the drivers for the device are missing. I've tried installing older itunes verions, searching for drivers myself, used 3 different Apple USB cables, restarting the ipod with the center + menu buttons, and checked the format (windows). I also have a 2nd gen ipod nano which is recognized with no trouble. All the tests on the classic, with the exception of firewire, passed and the hard drive works fine. The classic also isn't recognized on 2 other Windows 7 computers. If I try to put the ipod in disk mode, it just says "ok to disconnect" without giving me any other options. Also, the ipod charges on both wall USB and the computers USB. I have also tried all 6 USB ports. I've searched the web for days and have tried everything I could find to fix this, to no avail though. If anyone knows anything and can help, please post whatever you think will work. Thank you!

    When you plug in the iPod does it even appear in Device Manager?  See this article for more details.
    http://support.apple.com/kb/TS1496
    Otherwise, I have a feeling that the USB ports on the Netbook don't output enough power to allow the iPod to fully communiate properly with the Windows Vista O/S.
    B-rock

  • 5th Gen iPod Still Not Updating to Latest Software

    Since my last qery I've not done much with my iPod but yesterday I decided to bite the bullet and go for it. I formatted my 5th Gen iPod in Windows and deleted all content from it.
    After re-starting my PC iTunes started and recognised my iPod and started the update process. It downloaded and unzipped the software and started to update - farther than I've got before so things were looking up. Then "Error 1418..." again!!
    My iPod seems to be destined to be stuck on version 1.2.3 firmware unless any of you kind and knowledgable people out there have any new ideas because the 5 R's a format and numerous update and restore attempts have all failed.
    Any suggestions please?
    P.S. Happy Easter!

    You may refer to this tutorial, it's about how to fix iTunes sync problem with iPod. Hope it helps. Feel free to email me if you need further help.

  • Ipod does not connect to computer or show up in itunes

    I plug my ipod into the computer and it does not show up in itunes. It worked when I first bought it 3 months ago and suddenly will not connect...
    I have tried other computers as well as rebooting and then connecting but still nothing...
    It is incredibly frustrating. Any ideas?

    Same Problem. I have a 4 year old 40G click wheel. all was fine until today. now when i connect to my PC i do not hear the audible tone and nothing happens except my iPod turns on but i do not get the "Do not Disconnet" message and my iPod does NOT show up in iTunes. also, it causes my computer to lock up and i have to turn off the computer and reboot just to use my computer. tried reset; tried the disk mode. still not working. it did this yesterday once and i reset my iPod and all was fine. today, that doesn't work. any ideas????
    HP nc6320   Windows XP  
    HP nc6320   Windows XP  

Maybe you are looking for

  • Qosmio G30-194 What type of Vista (Home, Business or Ultimate)?

    I have two Qosmio G30. One at work (G30-153) and one at home (G30-194). I use both for working and also to play movies, games, etc. At work I use a domain. Please advise me about what version of Vista is better to use. I prefer to have the same versi

  • Has anyone experienced an image in the workspace suddenly going dim?

    Using CS 4 with Windows 7.  Sometimes when working with an image it will suddenly go dim.  The rest of the screen stays bright (tools, panels, tool bar etc.)  This seems to happen when I switch to something else such as My Pictures and upon returning

  • Input Tax  - difference between sap version 4.7 and version 5

    Hi All I done total customising of input tax on sap version 4.7 as well as version 5. now I want to enter following invoice through t.code F-43:-    Raw Material Cost                           50,000.00 Add:-  Excise                                  

  • Hierarchy: How to suppress duplicated/repeated rows in a BEx query

    Hi Gurus. I have a BEx query which displays data based on a Cost Element hierarchy.  When the hierarchy is expanded to leaf level (or any level), all key figures and characteristics are displayed for the leaf level but are also repeated throughout al

  • Change e-mail property

    Hi, I have a question regarding the e-mail property in the control panel. A Groupwise user A is specified there. This user logs in to the Groupwise client. Now, user B logs in to the Groupwise client. However, user A is still entered in the e-mail pr