5th Gen IPod not recognized by Windows

My problem seems a bit similar to others but just not quite enough that I have to ask this. Sorry for the long post in advance.
I sync'd my Ipod about ohhh a month ago and last charged it using my laptop (which doesn't have itunes installed on it). My Ipod was already set up to be a hard drive via the Itunes tools.
Now, the problem is, is when I plug in my IPod to known good USB ports nothing at all happens. I have tried this so far:
Reset my Ipod.
Try another Cable. Another USB cable will not work but I can interestingly enough charge my Ipod with a car adapter I bought.
Tried two very different PC's. One a laptop (HP) the other a home built pc.
I checked my services.msc like some have suggested. Both Plug and pray and Terminal services are on.
Only thing that I have installed recently between not working on this computer and working was Sims 2 Pets. The laptop has had no new software installed and still doesn't not see any device plugged into it.
Did not update my Itunes until after the problem happened.
So, I can charge and still listen to what I have on my ipod currently but never sync again. There some kind of limit to times you can plug your Ipod in or something?
If anyone could help me on this I would be very greatful. I am planning on taking my ipod into an Apple store and see if they can do anything. At the moment I am angry and just want to go exchange the darn thing again.

I went to the Apple store in my town today and had them test out my iPod on a mac there. No avail. Even the mac wouldn't recognize my iPod. He even forced it into Disk mode there and it still didn't work. The sales man suggested I contact apple care and get it replaced.
Just as a note to what all I have tried since my last post, i tried another computer that did not have any of the current Windows updates (note: all systems I tested this on was WinXP) and that system didn't recognize it either. Nothing! it is as if Windows just ignores that anything is in the port... very fustrating.
So I am going to try and get a replacement. I let you know if this solved my problem.

Similar Messages

  • 5th Gen Ipod not recognized by windows or itunes. Have tried it all. Any Ideas?

    Hello everyone. I have a 5th generation Ipod I recently purchased that I'm having what seems to be an common issue. When I connect the ipod to my computer via USB, the Ipod is not recognized in windows or Itunes. Occasionally the Ipod will charge when connected but not always. Though this is the same for the old wire I used and the new one I purchased today. Even when shown charging the Ipod is not recognized and there is no noise that a device has been connected. I have tried the 4 R's (without Restore) which I can't do, chaninging the drive letter, disabling start up software,uninstalling and reinstalling all Apple Software. I have tried connecting to another computer and have gotten the same result. When I check the diagnostic screen on the ipod it shows that a usb cable is detected. I have upgraded all my driver software, disabled and reenabled them. I'm almost 3 hours from the nearest store so that it out of the question. I'm curious if anyone has any other ideas and will try anything you think might be the issue and fix. Thank you for time.

    From my experience, the only way you're gonna get a PC afflicted with this disease to work with a 5th gen nano is to roll back to an earlier version of iTunes.  Those affected have been exhausted by this ongoing issue.  To update or not to update?  And I always say never update unless you have to, and turn off all that auto update mess!
    I have two core2duo lappies running 32b vista.  My workflow dictates 32b fyi.  One is acer aspire running itunes v 11.1 (.0.126),  5th gen nano was originally formatted and works just fine on this machine to this day.  My other is the bigger badder lenovo thinkpad and the 5th gen will NOT mount using any version of itunes past 11.0 (.1.12)  Windows mounts it just fine.  itunes is not having it.  no shirt no shoes no service.
    I have both a 4th and 5th gen nano.  The 4th gen works great on both machines, I even successfully tested it with the latest version (11.1.5) before subsequent deletion on the thinkpad!  Weird huh?  I think my next experiment might be to restore my 5th gen w/ a Mac and theeeeen plug it into PC itunez.
    I'm at a loss on the thinkpad.  Scanned for intruders.  Cut the Lenovo bloat.  Executed system and reg maintenance.  Took down msconfig to a safe mode + itunes level to attempt to resolve possible sw conflicts but to no avail.  NO NO NO.  Every single dang port, every time on the thinkpad.  Has me feeling like others might get the same treatment by the next itunes update.  :|
    So in summary for me:
    5th gen nano and thinkpad are a NoGo on 11.1^  last working version for me = 11.0.1
    5th gen nano is working on an acer aspire 11.1.0  but no way in the world am I updating
    4th gen nano is kicking 5th gen nano's @zz so what would make me want to buy a new ipod?

  • 5th gen ipod not recognized by windows, but old ipod min works fine.

    my new ipod is not recognized by windows at all. my old ipod mini works fine. i even uninstalled everything and tried reinstalling the new ipod. after that didnt work, i plugged in my mini, and it reinstalled perfectly.
    I also plugged my new 5th gen into another computer with itunes and it recognized it perfectly.
    is there some sort of software conflict between the mini and other ipods? this is driving me insane.

    Try Resetting Your iPod while it's connected to the computer.
    Hold down the Menu and Select buttons until you see the Apple logo (or Menu & Play/Pause in older models).
    This will often get it recognized. It may take several attempts.
    Also See:
    Your Windows PC doesn't recognize iPod
    iPod does not appear in iTunes or on the desktop
    iPod appears in Windows Explorer but does not appear in iTunes

  • How to reformat Ipod Nano 5th gen when not recognized by Windows or iTunes?

    I've done all the steps on the site to correct this problem up until the reformatiing part except I tried to update the driver software but Windows says that it encounters an error when trying to install the new software.
    So after going through the steps I noticed that the iPod I just bought was formatted for Mac. It says that in order for me to reformat, I have to restore my iPod in iTunes but since it isn't recognized my my computer or iTunes, I can't do it.
    Suggestions anyone?

    Hello there, HateKnuckle.
    The following Knowledge Base article offers a pretty thorough step-by-step for troubleshooting your issue:
    iPod not recognized in My Computer and in iTunes for Windows
    http://support.apple.com/kb/TS1369
    Thanks for reaching out to Apple Support Communities.
    Cheers,
    Pedro.

  • 5th gen. ipod not recognized by Mac

    My 5th generation 30 gb ipod is no longer recognized by my Mac running 10.3.9 and iTunes 7. I've tried all of the standard troubleshooting except for restore since it can't be recognized to be restored. When it's plugged into the computer, it's charging with an animated icon but the ipod never shows up on the desktop or in iTunes. Help!
    5th gen ipod   Mac OS X (10.3.9)  

    Try Resetting Your iPod while it's connected to the computer.
    Hold down the Menu and Select buttons until you see the Apple logo (or Menu & Play/Pause in older models).
    This will often get it recognized. It may take several attempts.
    Also See:
    Your Windows PC doesn't recognize iPod
    iPod does not appear in iTunes or on the desktop
    iPod appears in Windows Explorer but does not appear in iTunes

  • 5th gen Ipod not recognized and not charging on any computer.

    Hello
    I have a 5th gen Ipod with an odd issue. I have an Ihome radio with Ipod dock in which my Ipod charges and plays everthing just fine. I usually just keep it there to charge and only hook up to my computer if I want to buy something or put other music on it. I tried syncing the other day and nothing happened, would not sync, charge, my computer would not even recognize it. I have tried 2 differnt cables, reset, have tried it with itunes started and not running on my vista computer and have also tried just to charge on a computer with XP that doesnt have Itunes installed. My daughter has in Ipod Touch that works just fine with both my cables and computers.
    Any ideas of whats wrong with my 5th gen?
    Thanks

    Try restarting your computer with your ipod plugged in. You might also try using a different USB port. If all else fails downgrade to itunes 6 here http://www.apple.com/support/
    kEat0n

  • HT1923 6th Gen IPOD not recognized by Windows 7 or Itunes

    Hello,
    Hi, I have a 6th Generation 8 GB IPOD which is not recognized by either Windows 7 Professional or ITunes. I tried all the steps mentioned in IPOD support. However the problem still persists. Need your assistance.
    Thanks

    What displays on the iPods screen when you have it connected?  I assume you have tried another known working USB cable?
    Is iTunes up do date on your PC (currently at 10.7)?
    Have you tried connecting to another PC or Mac?
    B-rock

  • 5th gen ipod not recognized by itunes

    i just downloaded itunes 7, i have no clue what my last version of itunes was, and when i plug my ipod in the screen on the ipod has the 'do not disconnect screen' but itunes does not see my ipod.
    the ipod is however viewable in explorer (im using windows) and itunes recognized it when i plugged it in, until i downloaded itunes 7. any help is greatly appreceated

    Try restarting your computer with your ipod plugged in. You might also try using a different USB port. If all else fails downgrade to itunes 6 here http://www.apple.com/support/
    kEat0n

  • 2nd gen ipod not recognized in windows xp or itunes

    I have been working on this for 2 weeks. I have loaded the latest usb drivers/chipsets. Have followed every suggestion on apple website. Obviously lots of people have this problem. When my shuffle is plugged in the computer sees it as new hardware and trys to load a driver which of course there is not one. The hardware "fails to install" and windows can't see it. itunes diagnostics sees all the controllers but no ipod connected. I am about to return the shuffle as I cannot use it. There is nothing wrong with my usb ports my ipod nano works just fine as do all my other devices (camera, printers, mouse, etc.)
    Has anyone solved this?

    there is no drive letter assigned. ALL that the computer does is when the ipod is plugged in it says "new hardware found" and the word ipod appears in the system tray. Then immediately the Found new harware Wizard starts up. it says, "This wizard helps you install software for: ipod. So I am interpreting that the usb port is working and the driver for the port is reading the device. However, since there is no disk or software to install, eventuall a Found new hardware bubble reappears saying you a problem was encountered and the hardware was not properly installed. I don't get any farther than that. The device is NEVER listed in My Computer. As indicated before, there is an entry in device manager showing the ipod under other devices with the yellow exclamation point and the detail showing a Code 1 - no driver.

  • 5th gen IPOD not recognized by BMW

    Hi all, I just had the ipod adapter added to my 2007 BMW 550i.
    I plugged in my ipod video, and nothing happened. Mine is a 60gb ipod video, software version 1.2.3, model MA147LL.
    The engineer at the shop had the 30gb version of the same ipod. Same software, but the model is MA146LL. (I suspect that is the model number difference between the 30 and 60gb ipod).
    The engineer's IPOD worked just fine. When it was plugged in, the BMW logo appeared on the ipod's screen and all functions worked.
    With mine, the battery begins to charge but nothing else happens.
    I have 'restored' my ipod but that didn't make any difference.
    My wife's iPhone also works fine in the car, so I don't think the problem is in the car. (and of course neither does the autoshop, so they are no help further)
    Does anyone have any idea? Is there a list of what is compatible or not with various BMW's ?
    Is there some onboard firmware that can be updated on the ipod? (other than the software?)
    thanks for any input

    Buy a Saab.
    Just joking!!
    Did the engineer plug his iPod in before yours? I was thinking that perhaps your car has "married" up to the engineers iPod or something? Can the iPod adapter be reset?
    Also, you may like to try this link: (Expert iPod tips BMW North America) http://bmwusa.com/Standard/Content/Owner/ExpertTips/iPod.aspx
    Good luck with it, let us know how you go.
    Cheers,
    Adam

  • Ipod touch 5th gen will not sync after windows 8.1 update

    ipod touch 5th gen will not sync after windows 8.1 update. Computer see's Itouch as mass storage and charges. Worked with Window's 8 fine, as soon as update was done and restarted computer Itouch doesn't show up. Itouch seen on two other computers.

    See:
    iOS: Device not recognized in iTunes for Windows
    I would start with
    Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
    Run this to help if it identifies the cause
    iTunes for Windows: Device Sync Tests
    Have you tried on another computer to help determine if you have a computer or iPod problem?

  • 5th gen Ipod not playing in any docking station

    I have a 6th generation ipod classic that works great in my pioneer receiver and in both cars. I bought a 5th gen ipod on ebay for my wife and it seems to work just fine.
    I restored it using itunes, then put synced songs to it. Everything works fine when it's connected to Windows but it won't play in any docking station. It gets a charge from the station, but won't play.
    Does the 5th gen ipod not work in docking stations or is it possible mine isn't functioning right. I contacted the manufacturer of the station in one of the cars and they said all ipods should work.

    I have the same problem with a Pioneer X-HM50-K hifi system. My 5th gen ipod (system 1.3 which up-to-date iTunes claims is up-to-date, tried resetting/restoring/all that), when plugged into the docking bay, pauses the music and shows a tick mark after a while with the text "ok to disconnect" beneath it. The tick mark becomes a Pioneer logo after a while but that does not change the fact that the ipod does not react, neither to the command buttons on the Pioneer system (or on the remote control) nor to the buttons on the iPod itself (those do 'click', but have no effect). It does get charged, but doesn't play, just as in the top posting.
    A friend's iPod nano works just fine on the Pioneer, and my iPod works fine for everything else (headphones, iTunes, other docking systems I tried at friends', ...). So there seems to be a specific incompatibility with Pioneer systems.
    How can this problem be investigated and solved ?

  • 5th Gen iPod Not Being Recognized by iTunes

    5th Gen iPod w/Updater 1.3. iTunes Ver. 7.6.2.9
    Two weeks ago purchased music with no problems; sync'ed library w/iPod w/no problems.
    Purchased music a few days ago- no problems. Started iTunes today to sync iPod and got msg saying registry values missing for certain drivers for burning discs, etc. Cause could be from other programs that burn discs etc.(???)
    Plugged in iPod, got the tone beep and then a message that iTunes doesn't recognize the iPod attached. Disconnect and reattach. Did this several times - still doesn't work. I can play tunes from my iTunes library and my iPod OK - just can't sync them up. Anyone got a solution??
    Thanks, Unicorn39

    Well,after digging into the 1000's of msgs regarding problems similar to mine I found something I thought might help at (http://support.apple.com/kb/TS1538). I teied it and found that my drivers were OK so that wasn't the problem. While trying things I suddenly got the iPod recognized and it started sync'ing. I think the solution to my issue was to connect the iPod first; wait for it to be recognized by the pc (the tone beep) then go thru the acceptance of iTunes agreement, etc., iTunes then opened and the sync process began. I tried it with iTunes open and it won't work. It sounds like a hokey way to do it but at least I have my library and iPod in sync.
    My next problem to work on is there seems to be registry problem with iTunes drivers for importing and burning CD's. Got to figure that out and fix.
    Since I do have CopyTrans I may just re-install a back-level of iTunes and copy my iPod into the new iTunes library.
    Unicorn39

  • Ipod not recognized by windows and wont syns

    5th gen ipod comes up unrecognized device, reset ipod, still nothing. an older ipod syncs and windows recognizes no problem on same cord and same usb input.
    a damaged conector in ipod?, plays music ok

    thanks for the info guys, ive never used my ipod on a mac (not that im aware of) and i would try using the usb but my computer does not have that 2.0 high speed usb thing so im forced to use the firewire. its weird cuz yesterday i uninstalled itunes and the ipod and when i installed everything, my computer recognized the ipod and it updated but now its doing the same thing again. dont nkow what the problem is? u guys think its the firewire?

  • Ipod not recognized by windows, itunes, and will not charge with pc.

    yesterday, when i went to sync some new music onto my 1gen nano, it did not work (duh). i plugged it in 3 times:
    -1st, it displayed the "do not connect screen" for one second, and itunes flashed the screen it shows when your ipod is connected, but then the ipod disconnected itself after that one second.
    -2nd, windows gave me a message saying the hardware could not be recognized.
    -3rd, nothing at all happened, as has been happening each time i try to plug it in since then.
    i've done the 5 R's .. and i've tried all the suggestions shown on posts that sound like mine, including these: Windows XP cannot detect an iPod.
    USB drivers are not installed properly or are out of date.
    iTunes 7 doesn't recognize the iPod.
    my ipod will charge when plugged into a wall charger, and it plays normally. also, my brother's ipod (2nd gen nano) is recognized by windows/itunes.

    Hello
    I have been having nearly the same problem as Crashcup for the past month. Differences being I am operating with Windows Vista and my iPod is a 160GB Classic. I have gone through all the steps in the troubleshooting documents to no result. I attach my iPod and it is not recognized by Windows, iTunes or even in Device Manager. Not even as an "Unknown Device".
    I know there is nothing wrong with the USB ports as two different external hard drives and a video game controller work perfectly fine through them. Same goes with the iPod itself; it continues to play and function normally, and is recognized by a charging device completely separate from my laptop. Just when attached to the computer there is no sign of it.
    I am very frustrated that there is no further instruction with regard to what to do with an iPod Classic (as referred to by Crashcup: "...it says to take a photo with an iPhone, or a screenshot with an iPod touch or iPad. WHAT ABOUT THE IPOD CLASSIC????)
    Any help would be much appreciated.l=

Maybe you are looking for

  • 6500 Classic NO VALID CERTIICATE error when downlo...

    Hi, I have a Nokia 6500 Classic.  I have it unlocked and now set up to use 3 Mobile UK.  I have been using the WAP which works fine but when i try to download any app it say NO VALID CERTIFICATE and wont let me download anything, Does anyone know how

  • Problem about Cups!

    Hey AF. I just got a Keycera FS3800 Laser printer - And want to setup this for networking printing! I have my server where I have installed Cups and edited along the wikiguide to cups. But each time I want to print a testpage - it stops the printer.

  • Libraries panel kills tool shortcuts

    Since updating PS recently, I've encountered a frustrating problem with the Libraries panel. Here are the steps to replicate it: Select a tool (any tool) Click inside the Libraries panel to put it in focus Try to select a different tool with a keyboa

  • Query regarding implementation of HashSet and TreeSet and AbstractSet

    I have found that the treeSet and HashSet extends AbstractSet and implements Cloneable and Serializable interfaces. What happens if AbstractSet itself implements Cloneable and Serializable interfaces, so that The HashSet and TreeSet need not to imple

  • Delete JDBC Asynchronoues Messages from Communication Channel

    Hello everybody, I have a lot of messages that I can see in the coomunication channle monitoring of a JDBC Receiver, now this messages are asynchronous tha channel was stopped, now the thing is that I need to Start the communcation channel but I need