5th gen iPod won't mount on G5 and screws with keyboard!

Is it since the itunes upgrades? I don't know, but I only use my iPOd rarely and so was surprised on plugging it into the computer that it didn't mount on the desktop
restarted: not only does it not mount but the keyboard+mouse has become unresponsive - seriously weird!
Checked all cable conections
had to force shut down
restarted: keyboard works but intermittantly,repaired permissions. Restarted - no change al locked up
Forced shut down
Removed ipod - restarted -everything is fine
except the iPOd which is totally unresponsive and is ON with the 'do not disconnect' sign
I guess it'll stay that way til the batterydies - I hope it isn't completely done for!
any ideas?

Did a search in Apple knowledge base and
http://docs.info.apple.com/article.html?artnum=304997
Solved it

Similar Messages

  • My 32GB 5th gen iPod won't sync

    My 32GB 5th gen iPod won't sync. There is still over 10 GB free and my itunes is only 17 GB yet it won't let me sync anything. Can anyone help?

    My ipod 32gb 5th gen will not sync to itunes or any mac computer. An error message appears saying that my ipod touch requires itunes ver10.7. Does anyone know how to get this on my ipod touch 5? I cannot find it, does it need to be installed onto my ipod from a computer?

  • 5th gen iPod won't show iTunes U

    using an iTune 10 (latest update), and synching with the 5th gen iPod. The synch goes well and when connected to the iTunes i can see the iTunes U on the list but when I disconnect and I can't find iTunes U on the iPod lists and menus... I read in a related post (about 5th gen iPod nano) a reply asking if the guy had set the files to have the 'iTunes U' mediatype. What does it mean and how do I do that?

    Have you set the files to have the 'iTunes U' mediatype?

  • I have a 5th Gen iPod Touch, I  downloaded an album and 2 of the songs had music videos. I didn't like it so I deleted it. But it still shows the song and the cloud sign next to it. How can I permanently removed songs/vids? On iOS 7

    I have a 5th Gen iPod Touch, I  downloaded an album and 2 of the songs had music videos. I didn't like it so I deleted it. But it still shows the song and the cloud sign next to it. How can I permanently removed songs/vids? On iOS 7

    Go to Settings>iTunes and App Store and turn off SHOW ALL

  • 5th gen iPod won't sync with iTunes

    I have recently upgraded my iTunes to version 8. Now my iPod won't mount. I get the following error when I plug in the iPod: "iTunes has detected an iPod in recovery mode. You must restore this iPod before it can be used with iTunes." I've restored at least 6 times and nothing. I have also downgraded to the previous version of iTunes and it still won't work. Please help me. Right now I have a 30Gb lump of coal sitting in my desk. (The restore obviously removed all my music for it.)

    Have you had a chance to look at this troubleshooting page? If not, have a look at the bottom section that covers what to try if the message keeps reappearing: iTunes has detected an iPod in recovery mode - Use iTunes to restore
    Towards the end it says "If after restoring your iPod, the message described above reappears, the iPod drive letter may need to be reassigned. See the "Change the Drive Letter" section of this document for steps to assign a different drive letter" which contains a link to this article: Windows confuses iPod with network drive and iTunes may exhibit strange behavior in relation to the iPod.

  • 5th gen ipod won't connect to usb 3, is there a fix?

    I have an ipod video (5th gen), and it won't connect to my new asus laptop since it only has usb 3 ports (I don't care if it will charge or not, I have a dock), my question is whether it could potentially connect to my computer so I could sync it if I use a usb 2 hub or something similar. My ipod recently formatted itself when it forced a reset, so I have to get my music all back. Anyone know a fix to it? Thanks for any help you guys can give me, really driving me crazy not having music to listen to when I'm out...

    You did install the latest version of iTunes on your new computer, correct?  Installing iTunes is how the software needed for iPods to be recognized as iPod gets installed.  Otherwise, Windows sees it as a generic device.
    https://www.apple.com/itunes/
    If the iPod is recognized by Windows, but not iTunes, you should go through this trouble-shooting document.
    iPod: Appears in Windows but not in iTunes - Apple Support
    FYI - My 3rd gen iPod from 2003 works fine with the latest iTunes; there's no such thing as an iPod that is too old. 

  • 5th Gen ipod won't sync a video podcast

    I have a 80GB iPod, only a month and a half old, 5th Gen.
    Thing is, I downloaded 5 video podcasts today, all from the same author.
    One of these podcasts WILL sync onto my iPod, however the other four won't, saying that the video format isn't supported, when all five videos have the same format and type.
    I have tried everything from renaming them to converting them and still nothing works.
    Can anyone please help? :]

    I am having the same problem. The difference is that mine was syncing and then suddenly it won't sync anymore. Hope someone answers your question.

  • 5th Gen iPods won't sync

    my 60 & 80 gig iPods won't sync to iTunes. When I connect them, they appear in iTunes, but I cannot add or delete music and several of the playlists don't show up on the iPod. My newer 120 gig iPods work fine. This started on 8-8-10. I am running the current version of iTunes.

    I've been having the same problem ever since I upgraded to iTunes 9. Before the update I never had any issues syncing new songs or playlists. I have purchased several new albums and haven't been able to get them synced to my iPod. When I plug in my iPod I get the syncing message and the "Do Not Disconnect" message shows up on my iPod for about 30 seconds to a minute, but when it finishes nothing has been added and the storage amounts haven't changed.

  • 3rd Gen iPod won't mount via firewire - any ideas?

    After working for a brief spell when I first hooked it up, the progress bar would freeze while I was trying to copy files across to the HD. I unplugged, reset the iPod and tried it in my old clamshell iBook, where it worked fine again.
    I tried resetting the PMU on the Macbook, but this only made things worse - the iPod now refuses to mount, despite still working fine on my old iBook. Tried resetting PRAM too but no difference.
    Do I have a duff port? Or could it be an issue with 10.4.6 on the Macbook?

    I tried a JVC digital handycam while on the phone to AppleCare, which it recognised in iChat, and showed a live picture in iMovie. I don't know how I would check for consistency with this device, but it seemed to be working ok.
    I'm connecting via a dock but have also tried connecting direct - all official Apple cables. No difference.
    I'm now noticing new behaviour. When I plug the iPod in it mounts very briefly, triggers iTunes, then unmounts. It stays charging from the Macbook's firewire port, but the 'do not disconnect' disappears and I can use it as if it was only connected to AC. This is reproducible, and is the same if I turn off the launch iTunes option.
    Once again, it works flawlessly with the old iBook.
    I'm almost tempted to go down to the Apple Store in Regent St. and plug my iPod into a Macbook there to rule out software - unless you have any other suggestions?
    Thanks for your continued support.

  • My 5th gen Ipod won't do anything but show the " Connect to your computer, use itunes to restore" screen. However my computer nor anyone else's will recognize my ipod. What can I do?

    My ipod will not do anything but show a screen that asks to "connect ipod to computer, use itunes to restore" My computer however will not recognize my ipod at all so there is no way to restore my ipod. I am not skilled in computers but if anyone has a step by step that would be great.

    Did you try a hard reset with the iPod still connected to your PC?  Have you tried multiple USB ports, preferably high powered USB 2.0 ports?
    To do a hard reset, first make sure the hold switch is in the Off position, then press and hold both the Select (Center) and Menu buttons together long enough for the Apple logo to appear.
    Have you also worked through each and every single troubleshooting suggestion in this Apple support document?
    iPod not recognized in 'My Computer' and in iTunes for Windows
    B-rock

  • My 5th Gen iPod touch does not keep time and the bluetooth will not turn on. Full restore did not fix.

    Recently my 5th generation iPod Touch stopped keeping time. As long as the screen stays on, it will stay accurate, but once it "sleeps" the time reverts to the last accurate time it had. If I go to Settings>General>Date&Time> and turn Set Automatically off and on, it will catch up, but just for as long as the screen stays on. Not too friendly for battery life that way. Also, maybe unrelated, the Bluetooth function will not turn on. When I try to turn it on, I just get a constant spinning wheel.
    I have tried everything from a simple restart to a full device wipe back to factory default. No change. I took it in to the Genius bar this afternoon. They tried a diagnostic and another wipe. Then they said they didn't know and I could pay $150 to replace it. Not a bad deal, but not what I wanted to hear.
    Any ideas?

    All I can suggest is
    Try DFU mode and then restore again to factory settings/new iPod              
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    If still problem that means a hardware problem

  • 5th Gen iPod won't sync using new iTunes and new Firmware

    I updated the iTunes software and firmware for my iPod, and I was excited about how cool it looked. Unfortunately, it doesn't work. It synchronized once. Since then, it hasn't worked. iTunes just freezes up and the "Do Not Disconnect Screen" never goes away. It will just sit there for hours doing nothing and telling me that it is updating, when it fact it is doing nothing. I have even gone through all of the steps of reseting, re-installing, and reformatting it. It still won't sync, but now I have the pleasure of having a 6-month old 60 gig blank hard drive. Has anyone else experienced syncing problems? Any ideas on how I can get this to work again?

    I am having the same problem. The difference is that mine was syncing and then suddenly it won't sync anymore. Hope someone answers your question.

  • My 5th Gen. iPod won't charge

    I recently got my iPod replaced when the screen was cracked. So I got a brand new one and a yesterday it wouldn't charge. It worked fine for about a month. I didn't get a new cable, I kept the one I had that worked fine. I plug it in and it just won't charge. I tried other sources like my iPod speaker that also worked fine before. It even plays music through it, which means I know it's connected, but it's not charging! I really do not think that it's the cables. Please help!

    - See:      
    iPod touch: Hardware troubleshooting
    - Try another cable. Some 5G iPods were shipped with Lightning cable that were either initially defective or failed after short use.
    - Try another charging source
    - Inspect the dock connector on the iPod for bent or missing contacts, foreign material, corroded contacts, broken, missing or cracked plastic.
    - Make an appointment at the Genius Bar of an Apple store.
      Apple Retail Store - Genius Bar                 

  • 5th Gen. iPod won't sync game

    Bought tetris and it won't update. I went to devices>games and the box where it says sync games cannot be checked. It says I have to update iPod, but it's already updated...Help.

    Have you tried reinstalling your iPod's firmware? For more info, read here -> Reinstalling iPod's firmware
    -Kylene
    If any post helps or solves your problem, please click the "Solved" or "Helpful" buttons on top of that post. Thank you for helping the boards!

  • 5th gen ipod won't turn off

    Anyone have a suggestion as to how to get my 60 gig ipod to turn off. i know how it is supposed to be done, but it just won't shut down. every other function seems to work. thanks.

    As it answered your question, you may also want to click solved next to Bryan's post. This alerts others which post answered your question and gives Bryan credit (in the form of points) for the help!
    btabz

Maybe you are looking for

  • How do I install ios 5.1.1 to my iPhone 4 (running on ios 5.0.1) if ios 6 is out?

    I am currently trying to install ios 5.1.1 on my iPhone 4 (who is running on ios 5.0.1) but iTunes says "the device is not eliglble for the build". I have been trying to install it from a chosen ipsw as I don't want ios 6 to get into my iPhone. Does

  • How do set operation timeout in tomcat server?

    hi all suppose i have one endless loop program(jsp) that program run under tomcat server, so it's keep on runing in tomcat server. i want, after some time the server send error message like operation timeout. how do set operation timeout in tomcat se

  • Misalignment between FEBA and GL account of the corresponding bankaccount

    Hi, For CCXXXX the balance in FEBA for the USD bank account does not agree to the balance in the GL account. The difference is too big to originate in the revaluation. According to the GL account, the balance is AUD 203.400, according to FEBA, the ba

  • Curious about object trace

    When I trace an object - say an instance of myMenu named myMenu, I get the following: trace (myMenu); // returns [object, myMenu_1]; I'm very curious about the _1 at the end of myMenu...  why is it there?  What does it signify.  I would think it woul

  • How connect to SAP?

    Hi, i want do an application, but i don´t know how connect to sap... In webdynpro i create a new model, and call the BAPIs... i want do the same in MI, can i? Thanks,