5th Gen iPod would not sync or restore. Now syncing really slowly

Long story, but I hope someone can help.
My 5th Generation iPod stopped working one day. Said it needed to be restored but when I tried, it wouldn't and then kept re-booting from the Apple logo. I used Disk Utility to wipe it out (took lots of work to get it to Disk mode) and then tried to restore again to no avial.
Finally put the iPod on my wife's iMac (knowing her iTunes/iPod worked) and viola! My iPod restored! Back to my iMac to sync and it's been working at it for more than 3 hours and only 320 out of 3245 songs have sync'ed!
Could it be my USB Bus? I changed cables and ports, but nothing seems to be right? Could it be that I have my iTunes library on a separate drive (attached through Firewire)?
Any ideas would be appreciated... the thought of driving an hour to the local Apple store with my mac and ipod isn't too appealing right now.

OK... can someone please help me? Maybe it's the USB bus on the Mac, but it's now been more than 6 hours and only 1,000 of over 3,000 songs have sync'd.
Thoughts? Ideas? Anything?

Similar Messages

  • 5th Gen iPod Video not syncing all video podcasts

    My 5th Gen iPod video is not syncing all of my video podcasts.
    I did specify in the settings to sync all videos, but for some reason it only places 3 of each on the iPod. This is using the latest version of iTunes, OS X 10.4.8, and iPod up-to-date.
    This did work fine with the previous version of iTunes and only seemed to happen since the "upgrade".
    I've tried restoring the ipod - didn't work
    Reinstalled iTunes - didn't work
    Rebooted system - didn't work
    Undocked/Redocked iPod - didn't work
    Please Help.

    Assuming you're running iTunes 7, connect the iPod and wait for it to appear in the iTunes source list. When it does, click on it, and click on the 'podcast' tab. Make sure it is set to sync all podcasts. Check the 'video' tab as well.
    iTunes 7 included several new options for setting just how the iPod will update in iTunes. So, it's a good idea to go through them and make sure they're set exactly how you'd like them to be.
    Hope this helps
    CG

  • I bought a brand new 5th gen ipod touch. im trying to restore from itunes backup. then it says connect to itunes but my hp laptop is not syncing it. when i plug it in it does nothing but say connect to itunes... how do i fix this?

    i bought a brand new 5th gen ipod touch. im trying to restore from itunes backup. then it says connect to itunes but my hp laptop is not syncing it. when i plug it in it does nothing but say connect to itunes... how do i fix this?

    Hey jtom234412,
    Thanks for the question. Based on the information you have provided, it sounds like your device is not detected in iTunes for Windows. The following resource may help resolve this issue:
    iOS: Device not recognized in iTunes for Windows
    http://support.apple.com/kb/ts1538
    Furthermore, if your device is in recovery mode (displaying an iTunes symbol, with a plug), see the relevant information under Step 5.
    Thanks,
    Matt M.

  • My 32GB 5th gen iPod won't sync

    My 32GB 5th gen iPod won't sync. There is still over 10 GB free and my itunes is only 17 GB yet it won't let me sync anything. Can anyone help?

    My ipod 32gb 5th gen will not sync to itunes or any mac computer. An error message appears saying that my ipod touch requires itunes ver10.7. Does anyone know how to get this on my ipod touch 5? I cannot find it, does it need to be installed onto my ipod from a computer?

  • TS1369 why doesnt my 5th gen ipod nano not connect with windows 8?

    why doesnt my 5th gen ipod nano not connect with windows 8?

    Doublechecking. Have you also tried a complete uninstall of both iTunes and all the other related software components and then a reinstall? If not, try the instructions from the following document:
    Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8

  • My 5th generation iPod will not sync to windows 7 ( has in past). shows error in iTunes -124. iPOD WORKS ON OTHER COMPUTERS

    My 5th generation iPod will not sync with my computer (windows7). It has before. Now it shows error -124. It wll sync with other computers. I have tried what they suugest on the computer.

    Try here:
    iPhone, iPad, iPod touch: Device not recognized in iTunes for Mac OS X
    Do not forget this part:
    Additional Information
    In rare circumstances, your device may be recognized after reinstalling iTunes, but after you restart your Mac, the device may not be recognized again. If this happens, and you are using Mac OS X v10.6 (Snow Leopard), please follow the steps in this article.

  • My nano 4th Gen. ipod will not sync album I just purchased from itunes.  It says it is syncing but does not. Can anyone help?

    My Nano 4th gen. ipod will not sync my new album I just purchased from itunes store.  It says it is syncing but does not transfer music.  can anyone help?  I am using windows 7.
    thanks,
    B.H.

    yes i have a solution to my problem only because of a recent phone call from apple they were great.......... in the right hand side of itunes my i pod was displayed.  click on the ipod symbol........at the top of the page you will see summary,,,,,,music,,,,,,movies,,,,,,tvshow,,,,,,photo,,,,,on this ipod.
    click on music check mark music done and sync
    problem solved
    thanks apple

  • Podcasts listened to on classic (5th gen) iPod don't sync to iPhone

    I have the feeling this has been covered before, but I get lost in threads of various ages talking about various versions of iOS, various versions of the Podcasts App, etc. 
    I have an iPhone 5C with the most current version of iOS (7.1.1) and the Podcasts (2.1.2) app.  My 17" MBP has the most recent version of Mavericks (10.9.3) and iTunes. (11.2.2).  I also have a 60GB, 5th gen iPod.
    Before I got my iPhone, I would plug my classic iPod into the Mac to sync.  Worked flawlessly.  I would download new podcasts episodes into iTunes, plugging in to sync would update the played count on both the computer and iPod depending on where I played them, and mark the played episodes to delete, and push new episodes to the iPod. 
    When I set up my iPhone, there was some oddness originally with random old episodes showing up on the iPhone, which then propogated back to the mac.  I marked those as played, which got rid of them, and haven't had that problem again.  I have my iPhone set up with the Sync tab on, refresh at every 6 hours, limit episodes off, delete played episodes on, cell data off.  I have the download episdoes off for now, so the phone itself only updates episodes when I sync to the computer.  I recently changed that.  I'm not sure if it will effect anything.  I generally sync the iPhone over the wifi, although I do plug it into the laptop to charge at night - I'm not sure if this intiates a sync or not with the laptop lid closed.
    The podcast app seems to work perfectly if I use the iPhone as my listening device.  I listen to something there, and it shows up as listened to on the Mac, changes propogate there well.  Later, if I plug in the iPod, it reflects those changes.
    The only problem I seem to be having so far is listening to podcasts on the iPod.  If I listen there, when I plug it in to sync with the Mac, those changes show on the mac.  Later, if I sync the iPhone, however, changes that originated on iPod do not sync to the iPhone, even if the Mac is reflecting those changes, do not sync to the iPod.  So I play one of three new episodes of a podcast on my iPod, sync it, my Mac now shows only two new episodes of that podcast, my iPhone still shows three unplayed episodes, even after a sync. 
    Is there anything I'm missing?

    Well i have a solution that does not get messy.
    very simple:
    1. Make Sure your all your iPod songs are backed up.
    2. Restore iPod to factory settings
    3. re-sync iPod media
    4. enjoy.
    Hope this helped
    ~Fox

  • 5th Gen iPod Still Not Updating to Latest Software

    Since my last qery I've not done much with my iPod but yesterday I decided to bite the bullet and go for it. I formatted my 5th Gen iPod in Windows and deleted all content from it.
    After re-starting my PC iTunes started and recognised my iPod and started the update process. It downloaded and unzipped the software and started to update - farther than I've got before so things were looking up. Then "Error 1418..." again!!
    My iPod seems to be destined to be stuck on version 1.2.3 firmware unless any of you kind and knowledgable people out there have any new ideas because the 5 R's a format and numerous update and restore attempts have all failed.
    Any suggestions please?
    P.S. Happy Easter!

    You may refer to this tutorial, it's about how to fix iTunes sync problem with iPod. Hope it helps. Feel free to email me if you need further help.

  • 5th gen iPod Classic not recognized

    Hi, I have a 5th gen iPod classic 30GB that my friend gave to me a few months ago. It was recognized on my computer and itunes at the start and I was able to sync and perform all the needed tasks. I recently had to reformat my computer and now the ipod isn't recognized by USB, or in itunes. The Device manager for Windows XP SP3 says "Unknown Device" and that the drivers for the device are missing. I've tried installing older itunes verions, searching for drivers myself, used 3 different Apple USB cables, restarting the ipod with the center + menu buttons, and checked the format (windows). I also have a 2nd gen ipod nano which is recognized with no trouble. All the tests on the classic, with the exception of firewire, passed and the hard drive works fine. The classic also isn't recognized on 2 other Windows 7 computers. If I try to put the ipod in disk mode, it just says "ok to disconnect" without giving me any other options. Also, the ipod charges on both wall USB and the computers USB. I have also tried all 6 USB ports. I've searched the web for days and have tried everything I could find to fix this, to no avail though. If anyone knows anything and can help, please post whatever you think will work. Thank you!

    When you plug in the iPod does it even appear in Device Manager?  See this article for more details.
    http://support.apple.com/kb/TS1496
    Otherwise, I have a feeling that the USB ports on the Netbook don't output enough power to allow the iPod to fully communiate properly with the Windows Vista O/S.
    B-rock

  • 5th Gen Ipod does not show photo tab under preferences

    I am trying to get pics onto my Ipod. The ipod tutorials suggest going to a photo tab which I do not have. I can not update the Ipod because Itunes 7 says that Ipod is already up to date? Is anyone having this problems?
    5th gen ipod   Windows XP   Itunes 7

    The ipod tutorials suggest going to a photo tab which I do not have. I can not update the Ipod because Itunes 7 says that Ipod is already up to date?
    can you check something for me? what icon is showing up in the itunes sourcelist? is it a wee picture of your 5th G, or does it look quite different?
    what version of the firmware is being cited in the "summary" tab you see when you select the ipod in the sourcelist? is that the same version that you see in the "About" screen on your ipod?
    Where's the iPod About screen, and what's in it?

  • 5th gen iPod will not unmount

    I have a 5th gen iPod which I use to backup other data files. The iPod setting within iTunes allow for desktop mounting of the iPod. When I attempt to unmount the iPod from the desktop (with iTunes closed) and only the finder (and dashboard) running, I get a message indicating that the iPod cannot be unmounted because it contains files that are still in use. As mentioned above, the only applications running are the Dashboard and Finder. I do have one widget that displayes hard disk usage information, and I have used the Activity Monitor to quit the process just before attempting to unmount the iPod but the unmount status does not change. Is there something else that I should be disabling before attempting to unmount the iPod?
    Power Mac G4   Mac OS X (10.4.4)   iPod 5th gen, iPod nano

    I can't really explain why but sometimes it happens, to mine too, normally if you try unmounting again it should unmount, if not, the next time you have your iPod mounted on your desktop, do a Repair Permission from Disk Utility (Repair Permission on your main HD, not your iPod)
    After that restart again, your problem should go away.
    Cheers

  • Known issue: 5th gen ipods do not work reliably with 10.6.1 (snow leopard)

    I just got off the phone with Apple support - there is a known issue preventing 5th gen ipods from connecting to Snow Leopard computers.
    I can confirm that it's a 10.6 issue - everything worked fine on 10.5.8 with iTunes 9, but right after the upgrade, no connect (not even in Disk Utility). Apple's working on a fix, but no ETA yet. My 1st gen touch works just fine.
    If you attempt to connect, it'll hang Disk Utility and may require a hard-boot to reset everything.
    So we just need to be patient.

    yeeahhhhh... I just plugged my ipod classic 5th gen, 30g into my brand new macbook pro... and it doesn't show anything up. Didn't even aweknowledge the ipod as a device. and worst of all... it said it was connected so i couldn't take it out but i had to since it wasn't doing anything so i unplugged it and now... it froze...
    If i reset my ipod or wait till the batteries run out and then connect it to my pc. will it work still?

  • IPod Nano (5th Gen.) will not sync certain artist!

    My iPod nano will not sync this one artist to my iPod and i have no idea why!!

    Hello Doesitmatter (Nice ,
    And welcome to Apple Discussions!
    Have you doubled check for this Artist's songs from under the Songs category on your iPod? If you can find them there, the Artist's tracks are probably marked as "part of a compilation" from under the Info tab of the *Get Info* window in iTunes. Double check that setting and if you make any changes, re-sync your iPod to apply the changes and see if that helps.
    B-rock

  • 5th Gen IPOD - Won't Sync and Not Seen by Windows

    Help!!!
    Tried the 5 R's. I have the IPOD in Disk Mode but whilst it will happily charge, it still is not seen by ITunes or Windows Explorer (though is visible inDisk Defragmenter). I have already un-installed and re-installed ITunes etc.
    Prior to putting it into Disk Mode the IPOD still had my library on it and owuld happily work.

    Have you had a chance to look at these troubleshooting pages? They may be of some help:
    iPod missing in My Computer and in iTunes
    iPod is not recognized properly by computer when USB drivers are not installed properly or are out of date
    If you are using a laptop, this page might help: iPod not recognized when connected to Windows laptop over USB

Maybe you are looking for

  • G/L account and Purchasing Organization

    Hi, I am new to SRM and have the following problem. I have the Item GUID. For this item, I want to get the G/L account in the program that I am writing. 1)Is there any function module that can give me the G/L account number for that item? or what tab

  • Defining G/L Account for product category and account assignment category

    We are using the standard configuration to default in a G/L account for a given product category and account assignment category combination.  This works well for us when it comes to the shopping transactions (i.e. BBPSC01, BBPSC02, etc.), however we

  • Facebook app wont download

    is there a problem with the facebook app

  • Regarding the Master Data and the MRP maintained.

    Hi, i have one query,my client has 4 plant,for manufacturing a product there are 10 operation.The 4 operation is taking on Plant A.The 5th and 5th operation is is in Plant B.The 7th operation is at Sub-contractor to vendor and return back to Plant A,

  • Video podcast not playing in separate window

    for some unknown reason, when I click onto the small video window where the artwork shows, it doesn't show the video podcast in its own window any longer the window appears on the taskbar, but it doesn't maximize I downloaded the latest version of iT