5th gen. keeps reseting itself

Whenever i plug my 5th gen. nano into my docking station, it automatically resets itself. it doesn't do this when i plug it into the computer via usb cable, but it does when i plug it into this dock.

Contact the dock manufacturer. They should have a tech support website or a toll free telephone number listed on the website or in the user manual.

Similar Messages

  • My Ipod just keeps resetting itself.HELP!!!!

    My 60 GB ipod video just keeps resetting itself. I have tried to reset it and plug it into my computer, what should I do??
    Windows   Windows XP  

    Try the standard fixes:
    - Reset. Nothing is lost
    Force an app to close: Hold down the On/Off button for a few seconds until a red slider appears,
    then hold down the Home button until the app quits.
    - Restore from backup
    - Restore to factory settings/new iPod
    If still problem that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.

  • My ipod keeps resetting itself when i plug it in to the computer, now what?

    Basically, I plugged my ipod into my laptop as usual and itunes sprang up with an error message that i can't quite remember. I just remember that it mentioned a file corruption and that i should either restore the ipod settings or i should disconnect and reconnect it. I reconnected it and got the same result, then tried again. This time iTunes didn't recognise it all and within a minute of being connected my ipod reset itself. The laptop registers it, but my ipod just keeps resetting itself and i don't know what to do. I've tried resetting it and restoring default settings, so what more can i do or is a repair the only option?

    Follow the steps mentioned in this article to disable the camera notification: http://support.apple.com/kb/TS1501 , then try again to connect to iTunes.

  • Illustrator 2014: Scratch disk preference keeps resetting itself

    Hello Illustrator community.
    I have recently noticed that in my Illustrator CC 2014 18.0.0, the scratch disk preference setting keeps resetting itself. I'm using a MacBook pro with a single SSD, but I have an external Lacie Thunderbolt SSD that I got to use as the scratch disk for Illustrator and Photoshop. The problem is that if I set the scratch preference to use the external as the primary and my startup as the secondary,  everything is fine and it let's me know that the change will take effect once it's reopened. Upon reopening Illustrator I double check and it's saved, and everything works fine. But if I happen to open Illustrator without my external attached, when I check the scratch preference,  it will revert to using the startup as the main scratch location, which I understand.  But the next time illustrator is opened with my external connected, the scratch setting is still defaulted to using the startup disk. At that point I would need to change the preference, close illustrator and then reopen to make sure Illustrator is using the external as scratch.
    So for some reason it's not saving my preference for the scratch disk, while all other preferences seem to be saved fine. In Photoshop CC 2014, I can set the scratch preference,  which works fine, close Photoshop and reopen without the external attached and then close and reopen with the external reattached,  and it will remember my preference for having the external as the primary scratch.
    Is this just the way Illustrator is meant to work, or is this possibly a bug? Anyone have experience with this?
    I used Illustrator CC 17.x.x before this but didn't notice if it operated the same way, since at that time I didn't have a dedicated scratch disk to use.
    Thank you very much, I look forward to your help and replies!

    The last thing Adobe AI does upon a quit is to write the existing state of the preferences file to disk. If it is using the local HD as scratch, then that is what is recorded in the preferences.

  • My IPOD keeps resetting itself

    When I connect my IPOD to the computer with the updater program running, the unit just keeps resetting itself on its own. The dpdating tool give the error message "can't mount IPOD" and shuts down. As long as I have the IPOD connected to the computer it continues to reset itself. Does any one have any ideas how to fix this problem?

    hi tricky D!
    hmmmm. let's try giving the technique outlined in this document a try:
    Strange iPod behavior when Windows confuses iPod with network drive
    (it sometimes seems to help in these weird cases.)
    keep us posted.
    love, b

  • Can anyone please tell me why my ipad keeps resetting itself and is slow on Internet since last update

    Can anyone please tell me why my ipad keeps resetting itself and is slow on Internet since last update

    I have tried doing restore but nothing is working. It has only been happening since the last updates

  • My ipod video keep reseting itself

    my ipod video keep reseting itself when i do a fast forward during a video is played......
    why would this happen?

    Check out my posting here
    http://discussions.apple.com/thread.jspa?threadID=483451&tstart=0
    Regards
    ./sherif

  • Ipod keeps reseting itself

    so after i had the trouble with my ipod last week and ended up replacing it at the apple store for a small fee of $32.05, this new ipod is giving me more problems.
    so this new ipod keeps reseting itself. for example, i connected it to my computer and the "do not disconnect" sign won't come off and it's not connecting to itunes. so i reset the ipod. it finally connected and then i ejected the ipod no problem. so then from now on, it resets itself, leading me to restore the ipod. so i restored it, and the problem still occured. and then i reset it again and now it's working fine.
    in conclusion, does anyone have some suggestions/comments/idea for this situation?

    that's EXACTLY what is happening to me. i plan to go back to the apple store very soon because i've run out of ideas as to what to do to solve this dilemma. i'm glad though i'm not the only one with this problem although i am sorry you have the problem too lol.

  • IPod keeps reseting itself while updating

    I've had previous trouble with my 60GB iPod Video, but I think this is the last problem... I am trying to update my iPod but while its updating the iPod keeps reseting itself over and over again... please help!!!

    There's nothing you can do but bring it back to the store. Mine does the same thing, it just goes to show that Apple is so busy pushing these new iPods on us and releasing them too soon that the customers end up having to deal with their hardware failures---all because they didn't take the time to test these!!!
    PowerMac G5 2.3 GHZ   Mac OS X (10.4.3)  

  • Finder keeps reseting itself

    Our ibookG4 keeps "reseting" itself (if that's even a good description). Basically, whatever program we are on gets sent to the back as the Finder takes over. As I type this, it has happened several times that inexplicably it goes from Firefox to the Finder and I need to keep "clicking" back and forth. Don't hear any spinning so not sure what it is. Help!

    Hi jaliscoman.
    The most common reason for this is to do with Stuffit and the latest security update.
    Try this:
    Check in System Preferences at the bottom. If you have Stuffit AVR there select it and then the Stuffit AVR tab on the left. Select 'Stop'.
    Good luck,
    Adrian

  • My ipod 5th gen keeps shutting down but today is turned off but it wont turn back on

    my ipod 5th gen keeps shutting down but today is turned off but it wont turn back on

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try on another computer                            
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar                                     

  • My iPhone 5 keeps resetting itself, If I take my device in to apple what will they do and more importantly what will it cost me???

    My iPhone 5 keeps resetting itself, If I take my device in to apple what will they do and more importantly what will it cost me???

    If your iPod Touch, iPhone, or iPad is Broken
    Apple does not fix iDevices. Instead, they exchange yours for a refurbished or new replacement depending upon the age of your device and refurbished inventories. On rare occasions when there are no longer refurbished units for your older model, they may replace it with the next newer model.
    ATTN: Beginning July 2013 Apple Stores are now equipped to do screen repairs/replacements in-house on iPhone 5 and 5C. In some cases while you wait. According to Apple this is the beginning of equipping Apple Stores with the resources needed to do most repairs for iPhones, iPads, and iPod Touches that would not require major replacements. Later in the year the services may be extended as Apple Stores become equipped and staffed with the proper repair expertise. So, if you need a screen repaired or a broken screen replaced or have your stuck Home button fixed, call your local Apple Store to see if they are now doing these in-house.
    You may take your device to an Apple retailer for help or you may call Customer Service and arrange to send your device to Apple:
    Apple Store Customer Service at 1-800-676-2775 or visit online Help for more information.
    To contact product and tech support: Contacting Apple for support and service - this includes international calling numbers.
    You will find respective repair costs in the appropriate link:
    iPod Service Support and Costs
    iPhone Service Support and Costs
    iPad Service Support and Costs
    There are third-party firms that do repairs on iDevices, and there are places where you can order parts to DIY if you feel up to the task:
    1. iResq or Google for others.
    2. Buy and replace screen yourself: iFixit

  • I am experiencing network failures with my Airport Extremes: the main router is a 2nd Gen, the extension a 5th Gen. The 5th Gen keeps on losing connection with the main router. Any ideas why?

    I am experiencing network failures with my Airport Extremes: the main router is a 2nd Gen, the extension a 5th Gen.
    The 5th Gen keeps on losing connection with the main router and thus with the internet.
    Any ideas why?

    Is the second Extreme configured to "extend" the network created by the first? If so its position must be such that it has a strong wireless connection to the first Extreme. If it is at the limits of the first one's wireless range its connection will be tenuous. Place them closer together and determine if that makes a difference.

  • My ipod 5th gen keeps turning off whenever I unlock it!

    A few days ago I was on my ipod 5th gen and it randomly restarted itself, I didn't think much of it but as soon as I unlocked my ipod it froze for a second or two and restarted itself again, it happens every time I unlock it, if i stay on the home screen its fine and I can access my music but it wont connect to any wifi and always restarts itself every time i type in the passcode. I've tried going into itunes to back it up and restore it but it needs me to allow access to my ipod by unlocking it (which i cant do) and saying i trust my computer. Nothing ive tried has done anything and i cant back it up cuz i cant unlock my ipod without it restarting itself.
    http://www.pinterest.com/pin/create/extension/

    Try:
    - Reset the iOS device. Nothing will be lost      
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Restore from an existing backup. You may have an iCloud backup. See:                                               
    iOS: Back up and restore your iOS device with iCloud or iTunes
    - Restore to factory settings/new iOS device.                       

  • IPod 5th Gen constantly resets and is not detected

    My iPod 5th Gen erased all my music and constantly resets when plugged in.  I've searched far and wide through support to no avail so I look to the community to aid my quest to load music to my iPod again.  Thanks in advance for the help!
    Situation:
    - music and all data erased suddenly and is currently in factory settings
    - when iPod is plugged in to computer, the iPod screen shows (in order):
         ° "connected, eject before disconnecting" (~5 seconds)
         ° off screen, completely blank (~1 second)
         ° apple logo appears as if restored (~5 seconds)
         ° repeat perpetually
    Attempted Remedies and Scenarios:
    - restore iPod via select / menu buttons
    - try running Disc Mode via select / play buttons
    - restore iPod via iTunes (cannot attempt because it is not detected under devices)
    - reformat and erase all data in iPod via iTunes (cannot attempt because it is not detected under devices)
    - reformat iPod via Disk Utility (iPod is not detected on Mac so cannot select)
    - attempted all of the above with the following variables:
         ° with pc running Windows 7, iTunes current
         ° with Mac mini running Mavericks, iTunes current
         ° with Macbook Air running Mavericks, iTunes current
         ° tried all USB ports on all above computers
         ° tried 2 separate 30-pin USB cables (both USB cables work with my iPhone 4s)
         ° iPod is fully charged
         ° restart all computers

    Hi everyone..  just found the solution... conveniently after I start a thread.  Turns out that my iPod nano had converted all 7.3GB of my 8GB into "Other" space and reset all my settings.
    Solution is as follows:
    - run disc mode while plugged-in (running Macbook Air)
    - restore dialog box appears via iTunes while in disc mode
    - restore iPod nano
    - upload music
    - enjoy

Maybe you are looking for

  • External Hard Drive not Readable & Input/Output Error?

    I was using my OWC 300gb external hard drive for a while and it's worked great. I had a bunch of files on it, but I recently transferred everything to another external HD I have, which worked fine, so I could erase this 300gb one. I can't remember wh

  • PSE7 Restore to different PC fails to update drive letter in catalog

    I'm trying to simply copy my catalog and photos from my desktop to my laptop to have with me when I'm away. From all the discussions it seemed like backup/restore was the best method in order to preserve all the tags and other data associated with th

  • Payment block to set in background

    Hi all, I need to set the payment block (BSEG-ZLSPR) in a background task of a custom workflow, so I developed a custom method in BUS2081. It works when I run it via SWO1, but not through the background task. I know it could be a problem of COMMIT WO

  • Trying to burn an audio book....need some help...

    Ok, I am burning some auidobooks for a friend. Rather than the audio book being broken down into tracks it is one track. The first book went fine though I ran out of CD's. The first book was a mix of brands and contained CDR and CDRW. I purchased the

  • DashBoard, LiveOffice and Dynamic CrossTab

    Hello, 1. I am using Dashboard 4.1 and Live Office for Webi CrossTab reports 2. There are many Webi Blocks that are CrossTabs that I need to connect to and implement in my Dashboard. All my cross tabs in the webi report are dynamic, in that, the colu