5W332 No task has been created-HELP

Hello
We have a problem in workflow area. When trying to create an standard
task TS (transaction pftc) I get transport request and ewerything seems
ok and the message "standard task saved".
However when exiting "pftc" I get message "5W332 No task has been
created".
Later on I can not invoke the task(I get the number in transport
request objects)
For 5W332 I do not find suitable note.
Maybe the problem is that systam was upgraded from 3.0 to 4.7 ext2.0.
How to solve this

Hi,
Once you create the task can you see the same in the Transport Organizer (SE01)? Just go into SE01 and choose to display and browse through and find whether the task is there?
Also within workflow when you are specifying the task to be as a workflow step try using the "TS" prefix to the number.
Hope this helps,
Sudhi

Similar Messages

How to find the date on which notification task has been released?

Hi All,
I am an ABAPer, I have a functional doubt. I have got a functional Spec's for which I have to create a report.
Here, I need to retrieve the field for "Date when the notification RECV task has been released".
I have checked and analysed that the data has to be pulled from 'QMEL' and 'AFIH' tables. I have the notification number with me, I need to pull the "Date when the notification RECV task has been released", there are a lot of date fields in QMEL and AFIH tables, I am able to identify the creation date for particular notification. I need to get the release date?
Could someone please help me, what is the field for release date for the notification in these tables (OR) please let me know the transaction be which we can identify the release date for notification task, I'll get the field name from there.
Please help, I dont have any functional consultants around me.
Thanks,
Vishal.

There are no fields for date for release of notification task in these tables.
Please help!!
Edited by: Vishal Saxena on Jun 15, 2009 8:22 PM

How to get the exact time when condition records has been created?

Hello All,
Can anyone thorw some light on - how to find the exact time on which a particular condition record has been created?
I have tried to get it from KONP {by inputting condition record number}, but unfortunately time is not tracked over there, but the date is tracked.
Await your valuable inputs on the same.
Regards,
Hrishi

Dear Hrishi,
Try with this
Go to display mode of the condition record through VK13 transaction from the condition record overview screen go to menu Environment >Changes>Click on Change report now system will take you to the Change Documents for conditions selection screen here you input proper selection data then execute now system will give the all the details here you can find the time also.
I hope this will help you,
Regards,
Murali.

Error -1074384569; NI-XNET: (Hex 0xBFF63147) The database information on the real-time system has been created with an older NI-XNET version. This version is no longer supported. To correct this error, re-deploy your database to the real-time system.

Hello
I have a VeriStand-Project (VSP) created with my Laptop-Host (LTH) which works with my PXI, while
deploying it from my LTH. Then I have installed the whole NI enviroment for PXI and VeriStand use on a
industrial PC (iPC). I have tried to deploy my VSP from the iPC to the PXI but the following error
message arose on my iPC:
The VeriStand Gateway encountered an error while deploying the System Definition file.
Details: Error -1074384569 occurred at Project Window.lvlibroject Window.vi >> Project
Window.lvlib:Command Loop.vi >> NI_VS Workspace ExecutionAPI.lvlib:NI VeriStand - Connect to System.vi
Possible reason(s):
NI-XNET: (Hex 0xBFF63147) The database information on the real-time system has been created with an
older NI-XNET version. This version is no longer supported. To correct this error, re-deploy your
database to the real-time system. ========================= NI VeriStand: NI VeriStand
Engine.lvlib:VeriStand Engine Wrapper (RT).vi >> NI VeriStand Engine.lvlib:VeriStand Engine.vi >> NI
VeriStand Engine.lvlib:VeriStand Engine State Machine.vi >> NI VeriStand Engine.lvlib:Initialize
Inline Custom Devices.vi >> Custom Devices Storage.lvlib:Initialize Device (HW Interface).vi
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * • Unloading System
Definition file... • Connection with target Controller has been lost.
The software versions of the NI products (MAX/My System/Software) between my LTH and the iPC are
almost the same. The only differences are:
1. LabView Run-Time 2009 SP1 (64-bit); is installed on LTH but missing on iPC. The iPC has a 32-bit system.
2. LabView Run-Time 2012 f3; is installed on LTH but missing on iPC.
3. NI-DAQmx ADE Support 9.3.5; something strage on the LTH, because normally I am using NI-DAQmx 9.5.5 and all other DAQmx products on my LTH are 9.5.5. That means NI-DAQmx Device Driver 9.5.5 and NI-DAQmx Configuration 9.5.5.. On the iPC side all three products are 9.5.5.. That means NI-DAQmx ADE Support 9.5.5, NI-DAQmx Device Driver 9.5.5 and NI-DAQmx Configuration 9.5.5..
4. Traditional NI-DAQ 7.4.4; The iPC has this SW installed. On the LTH this SW is missing.
In order to fix this problem I have formatted my PXI and I have installed the following SW from the iPC:
1. LabVIEW Real-Time 11.0.1
2. NI-488.2 RT 3.0.0
3. NI_CAN 2.7.3
Unfortunately the above stated problem still arose.
What can I do to fix this problem?
I found a hint on http://www.labviewforum.de/Thread-XNET-CAN-die-ersten-Gehversuche.
There it is written to deploy the dbc file againt.
If this is a good hint, so how do I deploy a dbc file?
I would feel very pleased if somebody could help me! :-)
Best regards
Lukas Nowak

Hi Lukas,
I think the problem is caused by differenet drivers for the CAN communication.
NI provides two driver for CAN: NI-CAN and NI-XNET.
NI-CAN is the outdated driver which is not longer used by new hardware. NI replaced the NI-CAN driver with NI-XNET some years ago, which supports CAN, LIN and the FLEXRAY communication protocol.
You wrote:
In order to fix this problem I have formatted my PXI and I have installed the following SW from the iPC:
3. NI_CAN 2.7.3
NI CAN is the outdated driver. I think that you should try to install NI-XNET instead of NI-CAN on your PXI-System, to get rid of the error message.
Regards, stephan

Why i'm getting exception InvalidOperationException: Invoke or BeginInvoke cannot be called on a control until the window handle has been created ?

I have a backgroundworker1 dowork event and inside:
private void backgroundWorker1_DoWork(object sender, DoWorkEventArgs e)
BackgroundWorker bgw = (BackgroundWorker)sender;
if (bgw.CancellationPending == true)
return;
else
this.BeginInvoke(new MethodInvoker(delegate
timer1.Stop();
Button1Code();
timer1.Start();
trackBar2.Enabled = false;
trackBar1.Enabled = false;
while (true)
bitmaps = ImagesComparison.get_images_with_clouds(b1);
for (int i = 0; i < bitmaps.Length; i++)
ConvertTo1or8Bit.BitmapToGIF(bitmaps[i], @"c:\convertedgifs\" + i.ToString("D6") + ".gif");
break;
The exception is on the BeginInvoke part.
In the last few days i was running the program many times and i didn't have this exception even once.
And now every times i'm running it i'm getting the exception.
System.InvalidOperationException was unhandled by user code
HResult=-2146233079
Message=Invoke or BeginInvoke cannot be called on a control until the window handle has been created.
Source=System.Windows.Forms
StackTrace:
at System.Windows.Forms.Control.MarshaledInvoke(Control caller, Delegate method, Object[] args, Boolean synchronous)
at System.Windows.Forms.Control.BeginInvoke(Delegate method, Object[] args)
at System.Windows.Forms.Control.BeginInvoke(Delegate method)
at mws.ScanningClouds.backgroundWorker1_DoWork(Object sender, DoWorkEventArgs e) in d:\C-Sharp\Download File\Downloading-File-Project-Version-012\Downloading File\ScanningClouds.cs:line 715
at System.ComponentModel.BackgroundWorker.OnDoWork(DoWorkEventArgs e)
at System.ComponentModel.BackgroundWorker.WorkerThreadStart(Object argument)
InnerException:
Line 715 is: this.BeginInvoke(new MethodInvoker(delegate

Where are you starting the background worker from? Possibly the constructor of the form?
It would be greatly appreciated if you would mark any helpful entries as helpful and if the entry answers your question, please mark it with the Answer link.

SD How to create IDoc once Sales Order Invoice (Billing) has been created ?

Hi,
How to create IDoc once Sales Order Invoice (Billing) has been created ?
I.e Once you click on save button of Invoice , IDoc Should genrate Automatically.
Thanks

Hello,
Go to T.code VV31 and select the billing output type and select the access sequence required and in the details screen of create condition records give all the required entries for eg: may be Billing Type, Sales Organsiation etc.and in the medium choose the option as 6(EDI) and time select as 4 that is immediately after saving the document.Also please ensure that particular partners for whom idoc should be generated they need to have partner profile setup with the billing message types. Hope this helps.

No instance of object type PurchaseOrder has been created. External referen

Hi Friends,
We are on SRM 5.0 SP11, R/3 4.7 backend.
When we try to create a PO manually in SRM PO doesnot get created, but we get this error message in application monitors of RZ20 - "No instance of object type PurchaseOrder has been created. External reference: "
I have looked at the note 973952 but this is not applicable for our system.
any help on this ???
Regards,
Kumar
Edited by: Kumar on Apr 23, 2008 1:35 PM

Hi all,
@Dinesh: I have checked all the settings mentioned by you and they are in place.
@David: the other errors following this issue are
PurchOrder 0800000024: PO header data still faulty
PO 0800000024: Document type ECPO not allowed with doc. category F (Please check input)
PurchOrder 0800000024: Item category not allowed with document type ECPO.
As suggested by Hitender, I tired to push the PO manually throgh the function module and now in RZ20 i get the error as PO 0800000024: Document number 800000024 not within defined inter val
But I checked the number ranges in both the systems and they looks fine...
This is ECS scenario:
In SRM System I have maintained the number ranges for local PO as 08 0800000001 0899999999 800000030
and in R/3 08 0800000001 0899999999 800000030 X(ext flag selected).
Please advice whether this is correct.. I have also checked the Document types item categories.....
Regards,
Kumar

How to change the internal order type when it has been created?

There is an internal order, when it being created, the user chose the incorrect order type and save it. but the internal order number is useful. so we just want to change the order type or delete the order to release the number. so can you give me some solutions to solve it. I can not find the way neither change the order type nor delete it. thanks very much.

You are unable to change the internal order type once an internal order has been created, however you can delete the IO if there haven't been any postings made.
In change mode (tcode KO02), go into the internal order. Go into the following menu: Edit > Deletion Flag > Set. Before you exit the IO, save the master record.
Depending upon your archiving settings, you should then be able to select the menu path: Edit > Set Deletion Indicator.
If the IO isn't deleted, you can "clobber" it by going into the IMG and deleting the IO using the function "Delete Test Data". This should only be done by a technical person to ensure that a mass-delete doesn't occur.
Please note that if the IO was an internally assigned number, you might just want to block it and re-use it later.
Hope this helps.
Kylie

Error: No instance of object type PurchaseOrder has been created.

Hi:
I am using BAPI_PO_CREATE1 to create PO's using webdynpro. I get the following error message when I attempt to create a PO.
No instance of object type PurchaseOrder has been created. External reference:
Please help.
Thanks
Sriram

Ramki:
Yes, I did. The initialization code is as follows
Bapi_Po_Create1_Input input = new Bapi_Po_Create1_Input();
input.setPoheader(new Bapimepoheader());
input.setPoheaderx(new Bapimepoheaderx());
input.addPoitem(new Bapimepoitem());
input.addPoitemx(new Bapimepoitemx());
input.addPoaccount(new Bapimepoaccount());
input.addPoaccountx(new Bapimepoaccountx());
input.addPoschedule(new Bapimeposchedule());
input.addPoschedulex(new Bapimeposchedulx());
input.addPotextheader(new Bapimepotextheader());
Thanks
Sriram

How can I know the new Material Master has been created?

Does anyone have been tried about how to trigger the new Material Master has been created at a time interaval(maybe an hour or a day)?
I want to transfer the new Material Master within a given period from SAP R/3 4.6C to .NET Application through standard BAPI or RFC and .NET Connector 2.0. How can I do?
Any suggestion is wellcome. Thank You.

Thank you Jiri Ehrlich for answering my question..
I choose the third way as you suggest..
".. 3) Create your own ABAP function to export whole Material Master, call this function from your .NET application and do synchronizing on .NET side (so your .NET application will be RFC client).."
I've tried RFC that retrieve Material Detail by using BAPI_MATERIAL_GETLIST. It works fine but if I want to retrive the new Material or modified within a given period of time(for example 15 or 30 minutes). How I can do? Is there any standard BAPI or RFC to call from .NET or I have to write new RFC.
I have little background of ABAP so help me please. If I have to create new RFC, is there any ABAP Function to call or which table I can retrive those information.
Anyone can suggest?? Thanks in advance

Error workflow has been created successfully, but failed to publish and will not be listed in the Project Center

hello,
when i try creating projects in Project center am posted on with this error.
Your new XXXX workflow has been created successfully, but
failed to publish and will not be listed in the Project Center.For more information on the failure, visit the My Queue Jobs page or contact your administrator.
Any help would be appreciated!!!!!
Thanks regards, Vignesh.

hello Rouyre,
Thanks for ur reply
Am using
Microsoft Project Server 2013
15.0.4420.1017
Yes! It is Custom EPT with Custom Workflow(Declarative Workflow) built through VS2012
after associating the Site workflow with EPT i try creating Projects using my Custom EPT since then am posted on with this error.
ULS Error:Log
07/04/2014 10:21:38.03 Microsoft.Office.Project.Server (0x1840)
0x06B8 Project Server
Queue
ad3fy Critical
Standard Information:PSI Entry Point: <unknown> Project User: <unknown> Correlation Id: <unknown> PWA Site URL: SA Name: <unknown> PSError: <unknown> A queue job has failed. This is a general
error logged by the Project Server Queue everytime a job fails - for effective troubleshooting use this error message with other more specific error messages (if any), the Operations guide (which documents more details about queued jobs) and the trace log
(which could provide more detailed context). More information about the failed job follows. GUID of the failed job: 39cd36d6-3603-e411-b33e-00155d00091f. Name of the computer that processed this job: 3eebbc1d-7558-4050-bf5d-d985b23b89f5 (to debug further,
you need to look at the trace log from this computer). Failed job type: ReportWorkflowProj...
2c1ea19c-5849-002d-b89f-50aaf0a752fd
07/04/2014 10:21:38.03* Microsoft.Office.Project.Server (0x1840)
0x06B8 Project Server
Queue
ad3fy Critical
...ectDataSync. Failed sub-job type: ReportWorkflowProjectDataSyncMessage. Failed sub-job ID: 1. Stage where sub-job failed: (this is useful when one sub-job has more than one logical processing stages).
2c1ea19c-5849-002d-b89f-50aaf0a752fd
07/04/2014 10:21:38.03 Microsoft.Office.Project.Server (0x1840)
0x06B8 Project Server
Queue Jobs
ad3fy Medium
Error is: GeneralQueueJobFailed. Details: Queue Attributes: 39cd36d6-3603-e411-b33e-00155d00091f 3eebbc1d-7558-4050-bf5d-d985b23b89f5 ReportWorkflowProjectDataSync ReportWorkflowProjectDataSyncMessage 1 2c1ea19c-5849-002d-b89f-50aaf0a752fd
. Standard Information: , LogLevelManager Warning-ulsID:0x000DD158 has no entities explicitly specified.
2c1ea19c-5849-002d-b89f-50aaf0a752fd
07/04/2014 10:21:38.03 Microsoft.Office.Project.Server (0x1840)
0x06B8 Project Server
Project Server Database
ah91z Medium
Successfully got the connection string (database name=[ProjectWebApp_Practice], id=1f6004ae-5d8a-41d2-81f9-e424a31484aa, type=Consolidated). Requested access level=ReadWrite: Data Source=XXXX;Initial Catalog=ProjectWebApp_Practice;Integrated Security=True;Enlist=False;Pooling=True;Min
Pool Size=0;Max Pool Size=100;Connect Timeout=15
2c1ea19c-5849-002d-b89f-50aaf0a752fd
07/04/2014 10:21:38.04 Microsoft.Office.Project.Server (0x1840)
0x06B8 Project Server
Queue Jobs
ad3fz Medium
PWA:http://XXXX:10000/PWAPactice, ServiceApp:Project Server Service Application, User:PROJECTSERVER\system, PSI: [QUEUE] receiver http://XXXX:10000/PWAPactice: Group 3bcd36d6-3603-e411-b33e-00155d00091f type = ReportWorkflowProjectDataSync aborted at
Message 1, LogLevelManager Warning-ulsID:0x000DD159 has no entities explicitly specified.
2c1ea19c-5849-002d-b89f-50aaf0a752fd
07/04/2014 10:21:38.04 Microsoft.Office.Project.Server (0x1840)
0x06B8 Project Server
Queue Jobs
ad3f2 Medium
PWA:http://XXXX:10000/PWAPactice, ServiceApp:Project Server Service Application, User:PROJECTSERVER\system, PSI: [QUEUE] receiver http://XXXX:10000/PWAPactice: Group 3bcd36d6-3603-e411-b33e-00155d00091f correlation 82705dc5-3603-e411-b33e-00155d00091f
type = ReportWorkflowProjectDataSync failed at Message 1 Errors: GeneralQueueJobFailed, LogLevelManager Warning-ulsID:0x000DD15C has no entities explicitly specified.
2c1ea19c-5849-002d-b89f-50aaf0a752fd
Thanks regards, Vignesh.

Project Managers to know when a task has been updated for the last time

Hi,
I would like know if there is any timestamp feature in Project Server 2007, so that it can be possible for Project Managers to know when a task has been updated for the last time.
Thanks in advance

Hi,
If you are using the My Tasks to drive the task updates then you can use the 'Applied Requests and Errors' available under 'Go To' in the Task Updates area. Here the PM can find when requests have been approved and how many updates he/she received for a
particular task (by clicking the task name) etc.
Hope this helps
Paul

I have written an ebook that has been created for kindle. How can I export the book into iBooks author?

I have written an ebook that has been created for kindle. How can I export the book into iBooks Author?
I have tried converting the book to different files like, mobi, epub, pdf. By using an app on my iphone.
I still cannot add it to iBooks Author.
I'm stuck, Please help me!

Either use copy/paste and then format/style as desired, or take it to Pages or WORD and insert chapters - which may still require resettling.
If you're looking for a 1:1 port, with all styles and layout intact, you may be dissapointed, tho.

How to find the date when the users has been created in Hyperion Essbase

Please let me know, if there is any option or way to find the date when the users has been created in Hyperion.
Essbase - 9.3.1.0.0
Sun Solaris SPARC (32-bit) - 5.8
If not in Hyperion, could you please let me know if it gets stored in the repository. If yes, please let me know the table name in Oracle.

I don't know of a way of getting this information from Shared Services via the standard web UI. However you can see when a native user was created in openLDAP. If your users are all native then you can use an ldap browser to view the CreateTimestamp.
Port: 58089
User DN:CN=911,ou=People,dc=css,dc=hyperion,dc=com
Password: Your shared services admin user password
You should see each new native user under the ou=People and each CN will have a create timestamp.
I can't help if all you users are external or your using the old Essbase native security.
Gee

I am having problems with creating my apple id. On the phone it is advising me that the ID is not created and then when i do it online it says that it has been created. Can you advise me on what to do please?

I am having problems with creating my apple id. On the phone it is advising me that the ID is not created and then when i do it online it says that it has been created. Can you advise me on what to do please?

Apple ID FAQ http://support.apple.com/kb/HE37

5W332 No task has been created-HELP

Similar Messages

Maybe you are looking for