6.1.B.0.544 flashable on Sola?

6.1.B.0.544 is Xperia P rom, but it is also listed as Xperia Sola update (PTCRB 23aug2012). So... could I manually flash that one to my Sola?

You might try, probably will end up with missing fucnctions, or a brick. though.

Similar Messages

  • I am trying to download iTunes on my new desktop computer (Windows 7, 64 bit).  It starts installing, and then stops with the message- "The System Administrator has set policies to prevent this installation."  I am the sole user- please help.

    I am trying to download iTunes on my new desktop computer (Windows 7, 64 bit).  It starts installing, and then stops with the message- "The System Administrator has set policies to prevent this installation." This is a stand alone computer and I am the sole user.   Please help.

    This is a Microsoft Windows Issue.
    From a MS Support Engineer:
    "Hi,
    ·        Is the computer on a domain?
    ·        Is the issue isolated to only this software or you get the same error message with other software’s as well?
    Try the steps below and check if it helps.
    Step 1:
    Run the software setup file as an administrator and check if it helps.
    a. Right click on the setup file of the software that you are trying to install.
    b. Select “Run as administrator”.
    Step 2:
    Temporarily disable the antivirus software running on the computer and check if you are able to install the software.
    Disable antivirus software
    Warning:
    Antivirus software can help protect your computer against viruses and other security threats. In most cases, you shouldn't disable your antivirus software. If you have to temporarily disable it to install other software, you should re-enable it as soon as you're done. If you're connected to the Internet or a network while your antivirus software is disabled, your computer is vulnerable to attacks.
    Step 3:
    a. Click Start, type "Local Security Policy" (without quotes) and press enter.
    b. Click on Software Restriction Policies.
    c. In the right pane, double click on the "enforcement".
    d. Select “All users except local administrators”.
    e. Click Ok and restart the computer and check if the issue is fixed."

  • 544 Movement ,Qty & value is not getting updated in MC.9

    Dear friends,
    MC.9 & MB5b report is showing difference in Qty & Value.In my analysis i came to know that 544 movement is not getting updated in MC.9. I also Checked the Statistically relev. key as 2 and Consumption posting   G  in OMJJ.
    I require the info about MC.9 configuration or any info related to this.

    Hi,
    Please refer SAP note 581240 for this.
    For these stocks you have three valuation types for selection:
    ' ' = no inventory valuation
    'A' valuation = without reference to sales document ('make-to-stock
    inventory')
    'M' = separate valuation with reference to the sales and distribution
    document/project
    ONLY stock/stock movements with special stock valuation 'A'
    (make-to-stock inventory) are updated in Inventory Controlling.
    Thus, if you find a document which is not updated in the info structures
    of Inventory Controlling (S031-S039) and you require this, check the
    corresponding documents in the materials management tables. You can find
    the special stock indicator and indicator of the valuation of the
    special stock, for example, in document segment table MSEG in the
    following fields:
    MSEG-SOBKZ = Special Stock Indicator
    MSEG-KZBWS = Indicator: Special Stock Valuation
    Only A type (make to stock ) are updated in the info structures.
    Hoping this helps.
    Regards,
    Rajesh.

  • New Nokia C5-03..need sol...

    i bought nokia c5-03 on 14-5-11...i want to know sol for few things....
    1.Hanging-whn i type msg and click add contact..it hangs...n if i try to edit any one pic from my gallary..again it hangs..either i hav to lock n lock or switch off it n on.. thn it vl work..one time even the lock key dint work...these all happened whn thr s no running app.hw to manage it..without hanging?
    2.Whn i try to tak pic in cam..its coming in landscape mode..whn i turn potrait also the cam icons(to tak pic.A)r in landscape mode itself..the auto turn control is in ON only...the same thing whn viewing vidieos..clarity s not good to feel it as 5mp cam
    3.whn i copy songs from pc to mobile using usb cable,in which folder(in memory card) it shld be added?so tht it vl automatically update in music player..i tried all possibilities but no result..tel me in which folder v hav to add those songs..
    4.It s mentioned tht 2gb inbuilt memory card..but whn i recieved the mob its only 1.5gb..!!!!whr s rest .5 gb..?whn i scan memory its showing MIDP,SIS n other file occupied memory...wht r those app?
    pls give me solutions....

    try to download themes at nokia store..there where lot of themes there..

  • Problem with SUNWmdr and SUNWmdu in sol-9-u8-ga-sparc (9/05)

    I'm jumpstarting a 280R with sol-9-u8-ga-sparc (9/05) and it's not installing SUNWmdr and SUNWmdu correctly.
    The profile contains:
    root_device c1t0d0s0
    boot_device c1t0d0s0 update
    partitioning explicit
    filesys mirror c1t0d0s0 c1t1d0s0 15000 / logging
    filesys mirror c1t0d0s1 c1t1d0s1 4096 swap
    filesys mirror c1t0d0s6 c1t1d0s6 free /u00 logging
    metadb c1t0d0s7
    metadb c1t1d0s7
    During the jumpstart the 280R displays:
    - Selecting all disks
    - Configuring boot device
    - Configuring SVM State Database Replica on (c1t0d0s7)
    - Configuring SVM State Database Replica on (c1t1d0s7)
    - Configuring SVM Mirror Volume on / (c1t0d0s0)
    - Configuring SVM Mirror Volume on (c1t1d0s0)
    - Configuring SVM Mirror Volume on swap (c1t0d0s1)
    - Configuring SVM Mirror Volume on SWAP_MIRROR (c1t1d0s1)
    - Configuring SVM Mirror Volume on /u00 (c1t0d0s6)
    - Configuring SVM Mirror Volume on (c1t1d0s6)
    Verifying disk configuration
    Verifying space allocation
    - Total software size: 211.94 Mbytes
    Preparing system for Solaris install
    Configuring disk (c1t0d0)
    - Creating Solaris disk label (VTOC)
    Configuring disk (c1t1d0)
    - Creating Solaris disk label (VTOC)
    Creating and checking UFS file systems
    - Creating / (c1t0d0s0)
    - Creating /u00 (c1t0d0s6)
    Creating SVM Meta Devices
    - Creating SVM State Replica on disk c1t0d0s7
    - Creating SVM State Replica on disk c1t1d0s7
    - metadb: waiting on /etc/lvm/lock
    - Creating SVM Mirror Volume d0 (/)
    - Creating SVM Mirror Volume d10 (swap)
    - Creating SVM Mirror Volume d20 (/u00)
    Beginning Solaris software installation
    so all appears ok but then it shows:
    Completed software installation
    Solaris 9 software installation partially failed
    Solaris 9 packages partially installed
    SUNWmdr
    SUNWmdu
    and then
    Installation complete
    - Creating SVM State Replica on disk c1t0d0s7
    - Creating SVM State Replica on disk c1t1d0s7
    - metadb: waiting on /etc/lvm/lock
    - Creating SVM Mirror Volume d0 (/)
    - Creating SVM Mirror Volume d10 (swap)
    - Creating SVM Mirror Volume d20 (/u00)
    - Making SVM Mirror Volume as boot device (/dev/md/dsk/d0)
    - metaroot: acmifsqorc1-js: /a/etc/lvm/mddb.cf: No such file or directory
    - cp: cannot create /a/etc/lvm/md.cf: No such file or directory
    The system manages to boot but it's not using SVM.
    SunOS Release 5.9 Version Generic_118558-11 64-bit
    Copyright 1983-2003 Sun Microsystems, Inc. All rights reserved.
    Use is subject to license terms.
    configuring IPv4 interfaces: ce0.
    Hostname: xxxxxxx
    /dev/md/dsk/d10: No such device or address
    Configuring /dev and /devices
    The system is coming up. Please wait.
    checking ufs filesystems
    /dev/md/rdsk/d20: No such file or directory
    Can't stat /dev/md/rdsk/d20
    /dev/md/rdsk/d20: CAN'T CHECK FILE SYSTEM.
    /dev/md/rdsk/d20: UNEXPECTED INCONSISTENCY; RUN fsck MANUALLY.
    If I repeat the jumpstart with Solaris 9 (9/04) it works without any problems.
    I found the same problem at
    http://supportforum.sun.com/sunos/index.php?t=msg&th=131 3&rid=0
    which says it's fixed in Solaris 9 (9/04). Is it possible that it's broken again in Solaris 9 (9/05)?

    I'm jumpstarting a 280R with sol-9-u8-ga-sparc (9/05) and it's not installing SUNWmdr and SUNWmdu correctly.
    The profile contains:
    root_device c1t0d0s0
    boot_device c1t0d0s0 update
    partitioning explicit
    filesys mirror c1t0d0s0 c1t1d0s0 15000 / logging
    filesys mirror c1t0d0s1 c1t1d0s1 4096 swap
    filesys mirror c1t0d0s6 c1t1d0s6 free /u00 logging
    metadb c1t0d0s7
    metadb c1t1d0s7
    During the jumpstart the 280R displays:
    - Selecting all disks
    - Configuring boot device
    - Configuring SVM State Database Replica on (c1t0d0s7)
    - Configuring SVM State Database Replica on (c1t1d0s7)
    - Configuring SVM Mirror Volume on / (c1t0d0s0)
    - Configuring SVM Mirror Volume on (c1t1d0s0)
    - Configuring SVM Mirror Volume on swap (c1t0d0s1)
    - Configuring SVM Mirror Volume on SWAP_MIRROR (c1t1d0s1)
    - Configuring SVM Mirror Volume on /u00 (c1t0d0s6)
    - Configuring SVM Mirror Volume on (c1t1d0s6)
    Verifying disk configuration
    Verifying space allocation
    - Total software size: 211.94 Mbytes
    Preparing system for Solaris install
    Configuring disk (c1t0d0)
    - Creating Solaris disk label (VTOC)
    Configuring disk (c1t1d0)
    - Creating Solaris disk label (VTOC)
    Creating and checking UFS file systems
    - Creating / (c1t0d0s0)
    - Creating /u00 (c1t0d0s6)
    Creating SVM Meta Devices
    - Creating SVM State Replica on disk c1t0d0s7
    - Creating SVM State Replica on disk c1t1d0s7
    - metadb: waiting on /etc/lvm/lock
    - Creating SVM Mirror Volume d0 (/)
    - Creating SVM Mirror Volume d10 (swap)
    - Creating SVM Mirror Volume d20 (/u00)
    Beginning Solaris software installation
    so all appears ok but then it shows:
    Completed software installation
    Solaris 9 software installation partially failed
    Solaris 9 packages partially installed
    SUNWmdr
    SUNWmdu
    and then
    Installation complete
    - Creating SVM State Replica on disk c1t0d0s7
    - Creating SVM State Replica on disk c1t1d0s7
    - metadb: waiting on /etc/lvm/lock
    - Creating SVM Mirror Volume d0 (/)
    - Creating SVM Mirror Volume d10 (swap)
    - Creating SVM Mirror Volume d20 (/u00)
    - Making SVM Mirror Volume as boot device (/dev/md/dsk/d0)
    - metaroot: acmifsqorc1-js: /a/etc/lvm/mddb.cf: No such file or directory
    - cp: cannot create /a/etc/lvm/md.cf: No such file or directory
    The system manages to boot but it's not using SVM.
    SunOS Release 5.9 Version Generic_118558-11 64-bit
    Copyright 1983-2003 Sun Microsystems, Inc. All rights reserved.
    Use is subject to license terms.
    configuring IPv4 interfaces: ce0.
    Hostname: xxxxxxx
    /dev/md/dsk/d10: No such device or address
    Configuring /dev and /devices
    The system is coming up. Please wait.
    checking ufs filesystems
    /dev/md/rdsk/d20: No such file or directory
    Can't stat /dev/md/rdsk/d20
    /dev/md/rdsk/d20: CAN'T CHECK FILE SYSTEM.
    /dev/md/rdsk/d20: UNEXPECTED INCONSISTENCY; RUN fsck MANUALLY.
    If I repeat the jumpstart with Solaris 9 (9/04) it works without any problems.
    I found the same problem at
    http://supportforum.sun.com/sunos/index.php?t=msg&th=131 3&rid=0
    which says it's fixed in Solaris 9 (9/04). Is it possible that it's broken again in Solaris 9 (9/05)?

  • Error while copy document in Sol Man

    Dear friends,
      I am working in Sol Man 4.0.
    I have loaded the doc 'ABC" in SOLAR02. Now i want to copy the document in RMAMAIN using the option
    "Assign Document" ---L> as a copy, i am getting the following error
    "FOLDER CLASS IWB4FOLDER is NOT valid for objects of info object class SOLARGEN"
    Please guide to solve this..
    Regards
    Kumar

    Also have a look at the following notes:-
    =>  Note 26050 - FIPP:Posting not poss. (SAPMF05A,0700,batch input)
    =>  Note 800177 - FB01: No batch input data for SAPMF05A 0700
    thanks
    G. Lakshmipathi

  • Error While manually updating xperia sola to android 4

    hi
    I did the following download and install the latest Fashtool software ( flashtool-0.9.10.1-windows ) and I had installed the drivers .exe in the drivers folders
    and selected all the devices and I am not able to flash sola to the new version of android
    the log file at the link
    Please help guys :'(
    Solved!
    Go to Solution.

    Haha
    Glad to hear things worked out!
     - Official Sony Xperia Support Staff
    If you're new to our forums make sure that you have read our Discussion guidelines.
    If you want to get in touch with the local support team for your country please visit our contact page.

  • Generation of Configuration document through Sol Man

    Dear Friends,
       We are using Solution Manager for our R/3 implementation. In realization phase, we are capturing all transports in BC sets through Sol Man. Via Sol Man, i am executing t.code SCPR3 (Maintain BC set), after capturing all the confugurations in BC set, i am maintaining configuration related details in the same BC set, as below.
    In SCPR3 t.code, in top menu,
    Edit-----Add documentation.
    Here i am maintaining all configuration related details. And saving as "Raw version".
    The same way, for all the BC sets, i am maintaing the configuration related details within the same BC set itself.
    My client requirement is:
    1. Now i am calling all the BC set in Sol Man (t.code SOLAR02,  "Configuration" tab, under "type" coloum, i am selecting, "BC set".
    2. <b>Now, if i generate "Configuration Guide", the system has to automatically pick the the configuration details, what i have maintained in the BC set (as Add documentation).</b>
    How to do this?
    regards
    Senthil

    Dear Friends,
       In SCPR3 t.code, in top menu,
    Edit-----Add documentation. can we make this "Add documentation" to be mandatory? So without entering the details, one should not possible to SAVE the BC set.
    Can we make any settings for this?
    Thanks
    Senthil

  • How to Migrate Sol 8/SDS 4.2 Raid 1 disks to Sol 10 VM

    I have a system running Solaris 8 with S/w mirrorring of the system & data disks that has to have the O/S upgraded to Solaris 10. Due to the size of a couple of system mount pts it looks like I'll have to do the Solaris 10 initial install option and either combine these smaller partitions back into root or expand them for Solaris 10. Do I have to undo the mirrors & concat/stripes I already have before going to Solaris 10 (just on the system disk and/or the data disk) in order to use Sol 10's VM?

    I have a system running Solaris 8 with S/w mirrorring of the system & data disks that has to have the O/S upgraded to Solaris 10. Due to the size of a couple of system mount pts it looks like I'll have to do the Solaris 10 initial install option and either combine these smaller partitions back into root or expand them for Solaris 10. Do I have to undo the mirrors & concat/stripes I already have before going to Solaris 10 (just on the system disk and/or the data disk) in order to use Sol 10's VM?

  • I have an iPad mini and water has been spilled on it all over! So I'm wondering can it be fixed? I don't have a warranty as I got it as a gift am I sol?

    My I pad mini had a lot of water spilled on it! So now is it toast?? Can it be replaced? I don't have a warranty on it because I got it as a Christmas present. Am I SOL?? If so can you please tell me how do I get my pictures that are on there? I have iCloud yes and in that also my iPhone can never be backed up apparently my iPad has taken all the storage? How do I get to my pictures?? Can my iPad be fixed?? Please help! I'm new to these products! HELP!

    Service Answer Center - iPad - http://support.apple.com/kb/index?page=servicefaq&geo=US&product=ipad  <-- enter correct country in drag-down menu once on page.
    Had you activated Photo Stream?
    Photo Stream - http://www.apple.com/icloud/features/photo-stream.html
    iCloud: Photo Stream FAQ - http://support.apple.com/kb/HT4486 - "With Photo Stream, when you take photos on an iOS device or import photos from your digital camera to your computer, your new photos will be automatically uploaded to iCloud and pushed to all your other devices. You can also view the photos in your Photo Stream with Apple TV."

  • Siteinfo.sol file path too long

    Hopefully someone here can help with this problem. First, I'm
    running Windows XP Pro. Every night I do an automatic backup of my
    C: drive to an external hard drive (Maxtor) using Maxtor's backup
    software, EMC Retrospect Express HD 2.0. However, the backup quits
    when it tries to write a particular Flash file because the file
    path is too long. The file at the end of the path is siteInfo.sol
    and it is in a folder that is nested within 13 other folders. The
    file path is:
    C:/Documents and Settings/[my username]/Application
    Data/Macromedia/Flash Player/#Shared
    Objects/5WGFZ2N2/assets.cobalnitra.com/teams/repository/export/535/e93087b291004840/b0003 ba76d6c7/535e9308/7b291004840b0003ba76d6c7.swf
    From the "teams" folder on down through the nesting, there
    are no other files in any of the folders. The simplest solution
    would be to delete the "teams" folder, and thus all of the folders
    within it and the siteInfo.sol file, but I need to know if these
    folders (from "teams" on down) and this file are necessary for the
    operation of Flash Player. If they are, does anyone have another
    solution? I could go into the backup program and manually designate
    that every folder and file on my C: drive other than these be
    backed up, but that's a pain. I would love to call Adobe technical
    support, but there is no phone support for the free version of
    Flash Player.
    Thanks in advance for any help that anyone can provide.
    Todd Serota

    Todd,
    This is a Flash Shared Object that was written to your
    machine by cobalnitra.com. It's like a 'cookie' inside of Flash.
    You can safely get rid of it, though you might lose perhaps some
    saved game settings (or something saved by cobalnitra.com).
    Basically if that site is something you use a lot and does
    something important to you, then keep it. Otherwise you can delete
    everything under the #Shared Objects folder.

  • Booting from alternate disk in Sol 10 x86 1/06

    Hey all--
    I'm trying to set up a mirrored root filesystem on an x86 box with two IDE disks. It's running solaris 10 1/06. I've done this plenty of times on sparc boxes, but only once on an x86 box and after the metaroot, I had to edit bootenv.rc to point back to the "first" disk to get it to boot. That was with an older Solaris 10 release.
    I'm reading what I think is conflicting information from the SVM doc in the Solaris 10 book at docs.sun.com, various blog entries ( like this one from Mr Jelinek -- http://blogs.sun.com/roller/page/jerrysblog?entry=solaris_volume_manager_x86_root ) and I'm confused now.
    My main question is, do I need to manually put bootblocks on the second drive? My disks appear to have identical x86 partitioning as well as Solaris partitioning, and don't contain the now-deprecated x86 boot partition.
    Page 126 of the current (12/05) SVM manual says:
    You must specify slice 2 of the disk as the device, and slice 2 must comprise the
    entire disk.
    # installboot /usr/platform/i86pc/lib/fs/ufs/pboot \
    /usr/platform/i86pc/lib/fs/ufs/bootblk /dev/rdsk/c1t1d0s2but.. pboot appears to be missing in the latest Solaris 10 release.
    So does anyone know what the current situation is? Do you need to put bootblocks on the second disk in the latest Solaris 10? And if so, how? :) thanks!

    bad 12/05 SVM manual..bad! :)
    If I had done the RTFM thing like one is supposed to, I would have seen this bit of information:
    # man installboot
         The installboot utility is a SPARC only program. It  is  not
         supported   on   the    architecture.    users   should  use
         installgrub(1M) instead.I assume "the architecture" here could be better written as "the x86 architecture" :)
    and of course, this makes sense, since the Sol 10 x86 1/06 release clearly boots with GRUB. I suppose I should also get my learn on for the other binaries:
    # man -k grub
    bootadm         bootadm (1m)    - manage bootability of GRUB-enabled operating system
    grub            grub (5)        - GRand Unified Bootloader software on Solaris
    installgrub     installgrub (1m)    - install GRUB in a disk partition or a floppyI'll confirm boot-ability later today when I take the machine into the lab. But I think I'm on the right track.
    This is a great forum and I've learned a lot by reading it. many thanks to all the posters!

  • Problem in moving project from Old Sol Man 3.1 to New Sol Man 4.0

    Hi All,
    I am trying to move a project from solution manager 3.1 version to a new solution manager 4.0 version. I followed the below steps:
    1.Slected and transported the project using solar_project_admin tcode and created the transort requests in the old sol man version 3.1.
    2.Copied the cofile and datafiles from old sol man and kept in trans directory of new Sol man 4.0 version at OS level.
    3.Imported the requests into the new Sol Manager 4.0 successfully
    4.When I tried to open the imported project it told me to run the "solman_log_comp_mgr program" to convert the project to the central logical components. I just did it and it went well.
    I can see the project and do see the document types but no document names and getting all sorts of error messages when I tried to open these documents. Also I dont see the logical components under system landscape.
    Before importing, I just have configured servers/hosts, databses and all the components of system landscapes in the new solution manager.
    I request you to help me solve this issue. I also would like to know whether i followed proper procedures that i listed above? If not please suggest what procedures I should have follwed.
    Thanks in advance.
    Aravind Serikar

    Hi Aravind,
    to transport a project from 3.1 to 4.0 I would not use SOLAR_PROJECT_ADMIN to "migrate" a project. There for we developed SOLAR_MIGRATION there you can transport system landscape info, also you can transport projects. You should only transport system landscape info if in 4.0 SMSY is EMPTY. To transport projects you have only to specify your project and define a local folder. In this folder we store a few important information. Then all information will be collected in a batch job and automatically exported. Then you have to copy the data file and the cofile into the new trans folder. BUT do NOT forget the i-file. In the folder cofiles you will find a i-file, because we export knowledge warehouse content. This file is important, if you forget it you will get a return code 8. You do NOT have to add the files in the import buffer, we will do this automatically. To import the project, you have to call SOLAR_MIGRATION in SolMan 4.0 there you have to select import, then specify the folder with the few important information. We upload the info and start the import. That is it
    Regards,
    uDo

  • Latest DVDs of Support Package Stack for NW7.0, ERP 6.0, and Sol Man. 4.0

    Hi all,
    I want to request SAP the latest DVDs of Support Package Stack for NW7.0, ERP 6.0, and Sol Man. 4.0, is it possible & how to do it?
    Thanks,
    Toan Do

    Hi Toan,
    It's possible to order them or download them from SAP Marketplace
    http://service.sap.com/swdc
    Regards
    Juan

  • SAP Sol Man 4.0 Config guide

    Can some one tell me where i can find SAP Solution Manager 4.0 config guide?
    Also can some one send me any material for Sol Man certification exam.
    will reward points
    thanks
    PR

    Hi PR,
    please have a look at: www.service.sap.com/instguides -> SAP Components -> SAP Solution Manager -> Release 4.0 for the Configuration Guide and other related Guides such as the Master Guide etc... Here you will also find links to other material.
    For configuring the Solution Manager you need to go to transaction SPRO in your SolMan. Here you'll find the configuration of the Basic Setting, whcih you need to get it running and the scenariospecific settings, which are relevant for the scenarios.
    Best regards,
    Annett

Maybe you are looking for