6.1 in Windows XP Control Pan

Hi?I hvae a X-FI card and running Windows XP Pro. I've set the driver for the X-FI to 6. and syncronized with control panel. But the 6. configuration doesen't exist in XP? I can choose 7., but the the surround in some games doesn't work. Anyway to choose 6. in Windows? Or am I missing something? I can choose 6. on my Windows Vista RC2 installation. I have a 6. speaker system from Creative hooked up to the card.Message Edited by Rieder73 on 0-05-2007:02 AM

"Jeremy R." wrote in message
news:[email protected]..
> It definitely sounds like you have some software issues. For
> clarification, I have some questions for you.
>
> The first question is the most important to ask up front... did you
> install NI-DAQ along with NI-SCOPE? What do you mean when you say "or
> even NI-SCOPE alone"? I assume you mean the NI-SCOPE soft front
> panel. The VI you are running, is it a shipping example that comes
> with the driver? Does this error happen whenever you try to run any
> NI-Scope Example? Do you get the NI-SCOPE Soft Front Panel error in
> LabVIEW also? The last question is was this a clean install on a new
> computer or has there been NI Software installed i
n the past?
>
> Sorry to answer a question with a lot more questions, but your answers
> here can help me pinpoint what's going on. Thanks.
>
> Best Regards,
> Jeremy R.
> NI - Applications Engineer
Thanks for your response. I will respond to your questions in order.
It looks like NI-DAQ was not installed at the same time, based on the
dates of the files. However, it may have been automatically installed when
I installed NI-SCOPE. There was a list of software that was "supposedly"
installed in the IVI folder, but it may have been "related" files and not
the full NI-DAQ. Not sure.
Yes, "alone" means that I was just trying to run SGP by itself just to
see if it would work at all.
The vi I was running was one I got from a university that was custom made.
I haven't run any of the NI_SCOPE examples.
I do get the error in LabVIEW too.
There was existing NI software there in the past.
Another note: I don't have the DAQ card installed in the computer yet I
thought
that the softw
are may run without the card, but that may be a bad
assumption.
Also, I re-install LabVIEW 6.1 over the previous version, and then
uninstalled
and re-installed NI_SCOPE. Same result.

Similar Messages

NO java control panel in windows system control window

Hello together,
there seems to be a bug/feature (?) not allowing me to use the plugin functionality of my J2EEsdk-1_4
Situation:
Before i installed the J2EE i had an already installed java plug-in 1_4_2 working fine on
my Laptop giving my ms explorer 6.0 the Java VM needed. To avoid conflicts, i deinstalled
this plug-in, before i installed the J2EE 1_4_2. The result was disapointing.
There was NO java control panel in the windows2000 system control window after installing J2EE.
There was no corresponding registration key in the registry anymore.
Additionally there was no java related entrance to be seen anymore in the advanced internet and
security options of my ms explorer 6.0.
i have have found several trouble reports mentioned similar problems during the last months but unluckily
no solution working for me.
i did several tests with different java packages i downloaded today to get the actual versions
First:
i deinstalled the J2EE (not to get version conflicts) and installed the Java Plug-in 1.4.2 again.
This was proposed from ms explorer, when i tried to open an internet page with javaplugins included.
This plugin worked fine again. I could see and use the java panel and it enabled
my explorer to use the java plugin.
Second:
i deinstalled the Java Plugin and installed the J2sdk_1_4_2 instead.
The java plugin which is part of this package also worked fine.
Third:
i deinstalled the J2sdk_1_4_2 and installed the J2EEsdk-1_4-windows.exe.
the same misbehaviour as mentioned before. No java panel icon can be seen
in the windows system control, now registration......
as a workaround i have installed now both, the J2eesdk (i want to learn about)
and some additonal 100 MB java plug-in to enable my MS explorer to display
java applets again.
This is working fine again, but i really would prefer to have no need for two JREs.
By the way:
When i first opened the java control panel of the Plug-in and deactivated the update
mechanism , this plugin got really angry immedialtely afterwards. As a result my
laptop rebooted without coming up again. i had to initiate another hard reboot to get
windows back
i really would like to know , whats wrong me or the J2ee and i apriciate
any hint.
Best regards: yours aspirant

One thing you could do if you by all means want to have only one single copy of 1.4.2 on your system is to install standalone J2SE 1.4.2 (this will accomodate your Java console and browser plugin requirements) and then install Application Server only distribution (on the download page this is referred to as "Sun Java System Application Server Platform Edition 8") and sample applications set ("J2EE 1.4 SDK Samples "). In this way you get full content you would get in J2EE 1.4 SDK and all the benefits of standalone J2SE 1.4.2 installation.
This is obviously more convoluted at installation time since there are 3 separate things to install, but it would seem to fit your requirements.
Hope this helps...

SB Audigy2 w/Vista: Creative Volume Control conflict with Windows Volume Control(sndvol.ex

Hi Everyone,
I'm running Windows Vista on a Dell Dimension 8300 with a SoundBlaster Audigy 2(WDM) card. I have a few no-mind questions about how these things all work together:
. After I installed Creative's Vista driver upgrade for the SB Audigy 2 series, I noticed that there are now two volume control icons in the system tray. One is for the Creative Volume Control. The other is the original Windows Volume Control (sndvol.exe). Should these two controls be running at the same time?
2. The Master Volume is a lot lower in Vista than it was in XP. When I let Vista pick the sound drivers the first time around, I figured the lower volume had something to do with those. So I downloaded and installed the Vista SB Audigy 2 Driver Upgrade from Creative's website. The volume is still very low, however, and I have to peak all my volume controls to hear much of anything. Does anyone have any ideas why this should be so?
Thanks to all who took the time to read this! Have a good day,
Big Al Mintaka

Hi DakkonA,
Have you been in contact with Support? I would advised you to get in touch with them to rectify this issue.
Best of luck,

Maximizing Window while Control Hidden Doesn't Behave Properly

Hi, I've run into a situation where I'm trying to take advantage of the resizing capabilities of LV8.x and I'm running into a snag I was hoping to get some help on.
Basically, when I have a (grouped) control hidden and then maximize the window and then show the control, the control is not where it should be.
I've attached an example VI.
Any ideas?
Thanks, Bruce
Message Edited by bmoyer on 08-13-2009 09:44 AM
Attachments:
Resize Window while Control Hidden Test.vi ‏254 KB

Hello,
When you are resizing your front panel, it only resizes the visible windows. I have tested this out and submitted a corrective action request (CAR #182933). If you want your panel positioned properly, I would suggest forcing the placement of the cluster by adding an event structure for a panel resize event. This will allow you to determine the coordinates of where it should be.
-Zach
Certified LabVIEW Developer

In windows vista control Panel won't open

in windows vista control panel icloud is there but won't open. how do i fix this? also photo stream is not working right.

Ok, I found another thread on here talking about this and in the end I had to manually delete everything in c:\program files\quicktime & in quicktime alternative and all the quicktime files and folders in c:\windows\system32
Some of those files dated back to 2003!
I reinstalled and everything is ok now.

Windows 7 Control Panel won't uninstall Adobe Drive CS4

As I am now running Adobe CS6, I attempted to use the 'Uninstall or change a program' facility in the Windows 7 Control Panel to remove an entry labelled 'Adobe Creative Suite 4 Design Premium'. In fact, all that currently remains under that heading is Adobe Drive CS4. The Uninstall process for Adobe Drive CS4 appears to be working but then ends with the following message.
Done
Some problems occurred while components were
being removed. Please see below.
However, nothing is shown below that message except an Exit button. The uninstall process has no effect no matter how many times it is run.
Any suggestions on how to fix this or which disk locations are relevant for a manual deletion?
David

Creative Cloud help says to uninstall CC apps on a Windows PC to do the following:
Open the Window Control Panel > Programs and Features
Choose an app and click Uninstall/Change
Follow on-screen instructions
This information is NOT correct. Programs and Features does not contain all versions of Adobe software installed via Creative Cloud Desktop. It only shows the most current installation. Photoshop is a great example of why this is so. I currently have five versions of Photoshop installed through my Creative Cloud subscription. Windows has difficulty knowing which version to start, much less which to uninstall because the executable file for each version uses the same name--Photoshop.exe. In terms of designating which file types should be opened by which programs, the problem is equally evident. For example, setting current version Photoshop CC 2014 (version 15.1) as the program to open GIF files is not possible because Windows shows it's already done that with the designated program being Photoshop.exe. Of course, all other versions of Photoshop executable files use the name Photoshop.exe. So, it's not surprising that Windows is confused. But that does not help the rest of us.
The original questioner asked how they could get Windows Programs and Features to list CC applications. I don't think that's possible given the way Adobe has configured and named the executable files that Windows relies on. So, I'd add a question for Adobe: How do I uninstall versions of Photoshop and other CC applications that I no longer use. Programs and Features cannot help me--the programs simply are not listed. So, how does Adobe envision users uninstalling CC apps that don't appear in Programs and Features?

Preview Livecycle PDf in Windows 7 Preview Pane

Is there a way to preview Livecycle PDF's in the Windows 7 Preview Pane?

Hi,
when you save an XFA form as PDF, it creates a shell PDF that surrounds the complete XFA contents.
This shell PDF itself is a simple one page PDF with a message for the users if the PDF viewer wasn't able to read the XFA contents.
This message looks this way.
In the Windows Explorer you will only see this message in the preview, because it dosn't support XFA.

Cannot login from Windows iCloud control panel, but that not all...

I set up my Apple Id and downloaded the Windows iCloud control panel, but when I try to sign in from my PCI get this message: "You can't sign in because of a server error." But when I check the status of icloud everything is operational. But if I go to the icloud page directly, I can sign in normally. The reason this is an issue is that I cannot setup icloud on my computer properly and with all of the options I want without signing in from the icloud control panel. This really bites, and any help would be appreciated immensly.
Thanks, Scott

I am having the same problem. I really need a solution. My Admin is flying blind without being able to see my calendars.

TS3989 in windows iCloud Control Panel 3.0, photos checkbox grey out! what should i do?

in windows iCloud Control Panel 3.0, photos checkbox grey out! what should i do?

Have had some success with multiple computers running Windows 7, Vista, and Windows Server 2008 doing the following with iCloud Control Panel 3.1 (combination of several different remedies posted in forum):
Sign out of iCloud Control Panel
Open Task Manager and End all Apple iCloud and Photostream processes
Delete the files from the Directory C:\Users\[your user name]\AppData\Roaming\Apple Computer\Mediastream
Open iCloud Control Panel and sign in with apple ID
If Photo option is still greyed out, sign out and sign back in with iCloud email address and password.
This has worked for seven users that I support across several different windows hardware platforms. Good luck!

Windows Explorer Preview Pane

The Windows Explorer Preview Pane - For windows 8
How do I change or add a preview handler to the windows explorer preview pane, for MEDIA FILES. Preview handlers for pdf files can be changed by changing the default program used to open the file. Programs such as Adobe reader, Foxit reader
and Nitro reader all have a preview handler, how can I use vlc media player's preview handler?
If there is no way to change the default media preview handler, I would humbly like tolike to appeal that Microsoft allow third party video players such as the
largely popular gom player and vlc media player be allowed to add a preview handler for the windows explorer preview pane. Such as how third party pdf readers have, such as foxit reader of nitro reader.
Or if you could please improve the preview pane Media handler, it is very slow in startup and supports a limited number of video filetypes. File preview is a very important feature when dealing with many files, it makes it easier to choose the file
you would like to view before opening it. Much like Mac's Quicklook - which supports almost all file types.
I am a die-hard windows user and as such I am asking this favor as a die-hard windows user, it would be a very welcomed change for windows 8.

MEDIA FILE comes with a file extension, and each file extension associates with a CLSID. You need to register a COM server for your preview handler for your media file extension with the CLSID specified.
VLC Media Player's preview handler is free and open to use. You should be able to get it by asking VLC team on SourceForge.net.
Neither Foxit nor Nitro reader, till today, supports Windows 8 as far as I know. You would probably create your MEDIA FILE preview handler or package VLC preview handler in your own application according to the ready
PDF Preview handler for Windows 8.
To the best of my knowledge, only two PDF preview handlers on Windows 8,
PDF Previewer for Windows 8 by Wondersoft (France company) and
PDF Preview for Windows 8 by Vivid Document Technologies AG (German company).
The setup package created for the latter is much better than the former. You can study how the preview handler is set up by the installer.
PDF preview handler is used to
preview PDF document, usually the cover page (though the former provides preview multiple pages of a PDF file page by page), however, your MEDIA FIlE preview handler is to preview only the first frame of your media stream. That's the difference.

Input Controls pane - How to force Input Controls pane to visible on WebI?

We are planning to distribute WebI reports to our users. The reports would be scheduled daily and the users would get an email containing a hyperlink to the Webi report. Upon clicking, the hyperlink it would launch the WebI and refresh data to the latest instance of the report.
Is there a way to force the Input Controls pane to visible on this report when users click on the link?
Thanks

Hi Rohit,
I do not think this can be set in WebI. Nevertheless, I understand this suggestion as a very interesting enhancement for the tool. What about submitting it on Idea Place?
Thanks for the suggestion and your interest with input controls,
David.

Titanium Dolby Digital - Windows Volume Controls Not Function

I am extremely happy with the Titanium because it finally elminated the 4GB Snap-Crackle-Pop issues I've been having since I owned this motherboard.
However, I've noticed that when I enabled Dolby Digital encoding over an optical output the master windows volume controls and muting do not affect the audio output at all.
Using the master windows volume controls with the analog or unencoded digital optical outputs work fine. It is only when using Dolby Digital encoding that I see this strange behavior. In-game and application-level volume controls & muting work fine; it is only the master windows volume controls that are 'ignored' when using Dolby Digital.
I'm still happy to see Dolby Digital encoding on this card, and very pleased that I'm using 4GB now without crackling in games or during music, but hopefully this Dolby Digital issue can be fixed.
Have any other users observed this odd Dolby Digital behavior?

Unfortunately (for me) the two of you are correct and windows volume controls have no effect in Vista.
Auzentech has this on their FAQ:
Q : After installing the sound card and connecting it to my surround sound system using S/PDIF output, keyboard and Control Panel adjustments to Volume and Balance either do not work or have minimal affect. Is that normal
A : With Digital Audio output, output levels are controlled by the wave volume settings. Multimedia keyboards and remote controls only adjust the master volume. The third-party application "Volume Tracker" corrects the situation by linking wave volume and master volume. Volume Tracker is compatible with Windows 2000, XP and Windows Media Center.
I also found this article:
"Another direct consequence of transmitting a compressed audio signal instead of an uncompressed audio signal (more commonly known as PCM) is that the volume of that signal cannot be modified once it has been encoded. Because the bits in an encoded signal no longer directly correspond to the volume of that signal, it is impossible to increase the volume until it is decoded. This explains why your PC cannot control the volume of your sound when you are using Dolby Digital or DTS as the output. The connected device will be the only place where the volume can be changed."
http://windowsvistablog.com/blogs/windowsvista/archi've/2008/03/04/using-s-pdif-to-send-audio-from-your-pc.aspx
So it would seem that this behavior is not only intended, but apparently unchangeable in Vista. In XP there is a utility (Volume Tracker) that can fix this, reportedly. This utility has no effect in Vista.

Wireless says windows cant control this device

I am using boot camp with windows xp sp2 i loaded the drivers from the apple disk but whenever i try to select a wireless network it comes up saying that windows cant control the wireless device, and references wireless zero config. I have tried to start this service per Microsoft's instruction but every time I get a error message saying "Error 1075: The dependency service does not exist or has been marked for deletion." I have searched trying to figure out how to solve this problem but havent come across anything. Can someone out there help me?

i am having the same problem on my mac pro when i try to use the airport card to connect to the wireless network in my house. I was using a Hawking wireless G USB adapter that worked fine on the windows partition nut would cause kernal panics in OSX. Hopefully someone can help us out because it is very frustrating.

Mixing Wave and MIDI output for recording - Windows Record Control limitatio

I am using a SoundBlaster Li've! card with Magix MIDI Studio 2005. When I create a score that combines MIDI tracks with Wave tracks, I cannot record the combined audio stream using an internal recording program like Magix Audio Studio. It all sounds fine over the speakers, but I cannot record what I am hearing.
MIDI Studio and Audio Studio are not aware of each other directly - they appear to use the Windows Play Control and Record Control to set which channel should be used to provide audio to the recording program.
Unfortunately, Windows Record Control does not allow more than one channel to be used as the recording source. If I select MIDI, then Wave is deselected. If I select Wave then MIDI is deselected. I can record each separately, but I cannot sync them, since they don't send SMPTE or anything other than audio across the channel.
Is this reflecting a limitation of the sound card or is there some utility I need to use to override the Windows Record Control? Or is there some program or some hardware feature I need to make sure that the audio output from MIDI and from the Wave source are mixed down to the Wave recording channel?
I have already seen some recommendations to patch the audio out of the sound card to the line in. I am not interested in a solution such as this, since two conversions between digital and analog are bound to degrade the result significantly.
If I need a higher level sound, that's fine, just point me to the right one.
Thanks in advance!

Duplicate thread.
Cat

Windows Parental Controls

Hello,
I can’t access Windows Parental Controls
I got this message:
Unable to make changes to parental controls setting.
If this problem persists, see your system administrator.

Check out the settings in this knowledge base article: [[Block and unblock websites with parental controls]]

6.1 in Windows XP Control Pan

Similar Messages

Maybe you are looking for