6.5 vs 6.2 Dynamic calc member in basis of @allocate function

I just converted from 6.2 to 6.5 and have run across a problem in the @allocate function. It appears that it does not resolve the dynamic calc member. Formula is:"Curr Fcst"=@ALLOCATE("SumInput"->"Curr Fcst", @remove(@descendants(@currmbr(Accounts)),@Descendants(@CURRMBR(Accounts),-1)), "Consolidated"->"Curr Fcst"->&LactlmonTD, ,share); The problem is that &LactlmonTD - a substitution variable is "MAY YTD", which is a dynamic calc member. The formula works fine for a stored member "May" if you want to allocate based on last month only. This formula worked in 6.2, but does not work in 6.5 that I can see. Any ideas short of storing the data for YTD? I am logging it as a bug with hyperion.

OK - Hyperion technical support has solved the issue with an "Undocumented feature". I needed to add the following statement to my Essbase.cfg file:CALCFGDEPOPT FALSEThe explaination was as follows:"This is basically to turn off EVENT 28 in Essbae 6.5. In Essbase 6.2 EVENT28 needs to be turned on manually in the config file, while in Essbase 6.5it is automatically turned on."

Similar Messages

Datacopy from Dynamic Calc member

Hi All,
Within a dense dimension(Accounts) I want to copy data from dynamic calc member to a stored member. Below is the structure of my dimension.
Member X (~, Stored)
Member A (Dynamic calc, TBLast)
----Member A1 (Dynamic Calc)
----Member A2 (Dynamic Calc)
----Member A3 (Member formula, Dynamic Calc, TBFirst)
Now I want to copy data from Member A to Member X. I believe we cannot copy from Member A because it is a dynamic calc member, instead we can write a script which adds the children of Member A1, A2 and A3 provided A3 did not have member formula. I hope i'm right. Any suggestions will be highly appreciated. Using ver 11.1.13.
Thanks

Kevin,
Unfortunately, I think this is the way it works. DATACOPY will not copy dynamically calculated members to stored members.
Although it is not in the DATACOPY Tech Ref documentation, that's the way it works.
Here are some older threads on the "other" board:
http://www.network54.com/Forum/58296/thread/1184768427/DATACOPY+Help
http://www.network54.com/Forum/58296/thread/1054220911/Datacopy+Problem
You are going to have to come up with another way of copying the Scenario by summing the members into the target Scenario. It can be a pain because you're going to have to mind the creation of the blocks. SET CREATEBLOCKONEQ will be your friend on this one.
Regards,
Cameron Lackpour

Dynamic Calc Member in formula not working

Hello,
I am having an issue trying to calculate a dynamic calc member in a calc script.
Lets say this is our outline:
OC_GRANDPA (Dynamic Calc)
OC_PART1 (Dynamic Calc) (+)
Child1 (Calculated at top of calc script - STORED member) (+)
Child2 (Calculated at top of calc script - STORED member) (+)
OC_PART2 (Calculated in middle) of calc script - STORED member [NO CHILDREN] (+)
I need to use OC_GRANDPA in a formula
Final = OC_GRANDPA * .05 Rate;
It is giving me 0 when I run the calc the first time and works if i run it a second time. Is this issue two dynamic calc members? I tried making them twopass and no luck either. I really do not want to make them stored then do a calc dim (accounts) in my calc script. Any other ideas?? If I make my formula use the level 0 members and not the OC_GRANDPA it works but that is not good coding in case I added more Children Id like to automatically pick up. PLEASE HELP!!!! Thanks!

Thanks Cameron! I think I actually posted my mini hierarchy incorrectly as I am trying to put a formula on a different member under grandpa that has no children. Regardless it kept coming up zero -- all of the level 0 members are also calculated in the script. After much trial and error I ended up using the calc script for fomulas for the level 0's then I put a member formula on the member that I could not get to calculate in the script and also made it two pass. So then my calc script has the formulas for the level 0, a Calc Dim (Accounts) to perform the agg and calc the member formula then a calc two pass to calc yet another formula that uses this member.
I do however now have a different question regarding member formulas - do you know if they calculate top down or bottom up?

Data not rolling up of a dynamic calc member for a particular entity

Hi,
In my planning application data is not rolling up of a dynamic calc member for a particular entity whereas it is working fine for other entity.
Please find below the sample Smartview Retrieve
----------------Member_ALL---Member_None---Member Top---Member_ALL---Member_None---Member Top
----------------Entity 1----------Entity 1------------Entity 1----------Entity 2----------Entity 2------------Entity 2
Acc1------------100----------------#--------------------#---------------122---------------#-------------------122
NOTE: # denotes missing
Member_ALL and Member_None are children of Member_Top. Both Member_ALL and Member_Top are Dynamic Calc whereas Member_None is Store.
As shown above data is rolling upto Member Top for entity 2 while it is not getting rolled up for Entity 1.
Request you to please help in finding the error.
Thanks in Advance'
Joseph

Hi Joseph,
Is Acct 1 Dynamic Calc? In that case will it NOT calculate the combination MemberTop->Entity1 as Member_ALL->Entity1 + Member_None->Entity1.
I beleive it'll calculate the Acct1 member again for Member Top based on the dynamic formula (whatever the logic). If you make it Acct1 Stored, then the aggregation will be correct by first calculating and storing the Acct1 member and then AGG the Member dimension.
Cheers,
Abhishek

Dynamic Calc member has more than 100 children

In my db, I've a dynamic calc member, in say hierarchy Accounts, that has more than 100 members under it (children).
I'm using MaxL scripts to update the Accounts hierarchy i.e. adding new members, tagging UDA's etc.
However, the MaxL command is erroring out with a Network Error: Cannot Recieve/Send data. I understand if I try doing the update via
EAS and try to save the outline, it gives me the more than 100 children warning but still allows me to save it but via MaxL I cannot force
it to do so.
This is just a warning and shouldn't MaxL still save the outline? Is there something else that am missing or is there any solution for this issue.
This is a Sparse dimension. More members will be added to the hierarchy monthly, thereby not reducing the count below hundred.
Any help/advise is much appreciated. Thanks.
@deepak

I am envisioning an entire sparse Accounts dimension with all of the upper levels dynamic. If it is like most accounts dimensions I have seen it has a lot of level zero members and a lot of parent rollups. looking at top level members could be very slow (relative to if they were calculated or dense). We have all done interesting things in our cubes to gain some performance measure trading off calculation and retrieval performance. Doing something like this is an area where a testing is crital

Can i use a Dynamic Calc member as a Shared member

Can i use a Dynamic Calc member as a Shared member in other hierarchy?
is it mandatory to make a member as Stored type if we want to use the same member in other hierarchy as a shared member.?
-KK

Yes we can create a shared member of a Dynamic Calc member.

Dynamic Calc Member with Formula to Calculate a Rolling 13 Year

I have to create a rollup in my time dimension that will have 13 members representing each month of a 13 rolling forecast. I am having trouble setting this up as dynamic calc members with a formula assigned to it. For example, on of the members has the following formula.
As you can see, I am referencing several substitution variables since I want to make this as most dynamic as possible without having to make any changes to the formula member. Only making changes to the substitution variable. Any help would be much appreciated.
IF((@ISMBR(&Current_Year)) AND (&Act_RF_Last_Month == "Jan"));
"RTM 6" = @MDSHIFT(&Act_RF_Last_Month, -1, "Years", , 5, "Period",);
ELSE #Missing;
ENDIF
IF((@ISMBR(&Current_Year)) AND (&Act_RF_Last_Month == "Feb"));
"RTM 6" = @MDSHIFT(&Act_RF_Last_Month, -1, "Years", , 5, "Period",);
ELSE #Missing;
ENDIF
IF((@ISMBR(&Current_Year)) AND (&Act_RF_Last_Month == "Mar"));
"RTM 6" = @MDSHIFT(&Act_RF_Last_Month, -1, "Years", , 5, "Period",);
ELSE #Missing;
ENDIF
IF((@ISMBR(&Current_Year)) AND (&Act_RF_Last_Month == "Apr"));
"RTM 6" = @MDSHIFT(&Act_RF_Last_Month, -1, "Years", , 5, "Period",);
ELSE #Missing;
ENDIF
IF((@ISMBR(&Current_Year)) AND (&Act_RF_Last_Month == "May"));
"RTM 6" = @MDSHIFT(&Act_RF_Last_Month, -1, "Years", , 5, "Period",);
ELSE #Missing;
ENDIF
IF((@ISMBR(&Current_Year)) AND (&Act_RF_Last_Month == "Jun"));
"RTM 6" = @MDSHIFT(&Act_RF_Last_Month, -1, "Years", , 5, "Period",);
ELSE #Missing;
ENDIF
IF((@ISMBR(&Current_Year)) AND (&Act_RF_Last_Month == "Jul"));
"RTM 6" = @MDSHIFT(&Act_RF_Last_Month, -1, "Years", , 5, "Period",);
ELSE #Missing;
ENDIF
IF((@ISMBR(&Current_Year)) AND (&Act_RF_Last_Month == "Aug"));
"RTM 6" = @SHIFT(&Act_RF_Last_Month,-7);
ELSE #Missing;
ENDIF
IF((@ISMBR(&Current_Year)) AND (&Act_RF_Last_Month == "Sep"));
"RTM 6" = @SHIFT(&Act_RF_Last_Month,-7);
ELSE #Missing;
ENDIF
IF((@ISMBR(&Current_Year)) AND (&Act_RF_Last_Month == "Oct"));
"RTM 6" = @SHIFT(&Act_RF_Last_Month,-7);
ELSE #Missing;
ENDIF
IF((@ISMBR(&Current_Year)) AND (&Act_RF_Last_Month == "Nov"));
"RTM 6" = @SHIFT(&Act_RF_Last_Month,-7);
ELSE #Missing;
ENDIF
IF((@ISMBR(&Current_Year)) AND (&Act_RF_Last_Month == "Dec"));
"RTM 6" = @SHIFT(&Act_RF_Last_Month,-7);
ELSE #Missing;
ENDIF

We use similar logic but its in a calc script, not a dynamic formula.
Here's an example of what we do:
FIX (&Year, &Scenario)
IF (@ISMBR("JAN"))
"Average Usage%" = @AVG(SKIPBOTH, @MDSHIFT("Usage %"->"DEC"->&actYear, -1, "Year",), "Util %"->"JAN"->&actYear);
ELSEIF
ENDFIX
Another example in a different database:
IF (@ISMBR("JAN")) ((@MDSHIFT("Fees"->APR,-1,YEARS,)+@MDSHIFT("Fees"->MAY,-1,YEARS,)+@MDSHIFT("Fees"->JUN,-1,YEARS,)+@MDSHIFT("Fees"->JUL,-1,YEARS,)+@MDSHIFT("Fees"->AUG,-1,YEARS,)+@MDSHIFT("Fees"->SEP,-1,YEARS,)+@MDSHIFT("Fees"->OCT,-1,YEARS,)+@MDSHIFT("Fees"->NOV,-1,YEARS,)+@MDSHIFT("Fees"->DEC,-1,YEARS,)+"Fees"->JAN)/10)*12;

Sparse Dynamic Calc Member

All,
Is it better to have a sparse store member and calculating in Calcscript/Rule or sparse dynmic calc member with formula?
Thank You

Here's a little background on why sparse dynamic calcs can sometimes (but not always) be bad for retrieval performance:
- Essbase stores data in one of two types of files - the Index file and the Page file. (there can be many of each type of file, depending on how much data is stored in your cube)
- The index file stores all of the combinations of sparse members (where there is data). Think of each sparse dimension as a column in the index file.
- The page file contains "blocks" that are made up of your dense dimension members. Each "cell" in a block is 8 bytes. (a cell being a single combination of members from each dense dimension)
- Each row in your index file points to one and only one block. (this is why you need one member from every dimension to get to a data value)
So let's say we have three members in one of our sparse dimensions. For the sake of simplicity, let's say this is the only sparse dimension in the cube.
- Member "A" is stored.
- Member "B" is stored.
- Member "C" is a dynamic calc equal to "A" - "B".
Question - if you retrieve on member "C", how many blocks does Essbase have to pull into memory? 2 (the blocks for A and B), plus it has to create a block in memory for member "C". (at least I think it creates a block in memory . . . . ) Either way, that's a lot of I/O, relatively speaking.
If "C" were calculated in batch and stored, the same retrievel would only have to pull a single block into memory - the stored block for C. This is less I/O.
So why are some dynamic sparse calcs bad and others aren't? It all comes down to how many blocks the retrieval forces Essbase to pull into memory. (FYI this "memory" is really your database caches)
This is why sparse dynamic calcs like variance scenarios are common. A sparse dynamic calc that compares Actual to Budget doesn't pull a lot of blocks into memory. However, if you set a sparse parent to be dynamic, and it had 100 children, this would be pretty bad for performance.
If you can visualize this concept, you can performance tune a BSO cube. It's all about I/O.
Hope this helps,
- Jake

Dynamic calc problem while calculation another dynamic calc member

I have 6 dimensions. Two of them are dense and are tagged as Accounts and Time. The dimension I am having problem with is called "Metrics". It was originally dense. But because the calc scripts were executing slowly, I decided to make "Metrics" a sparse dimension. Now the calc scripts are all executing pretty fast. However, I now have data issues. For example: Within Metrics, I have a hierarchy that looks as follows: Metrics Input.Amount ~ BW.YAG.EQU Dynamic Calc, Two Pass Pct.YAG.EQU Dynamic calc, Two Pass. Both of these Members have a member formula associated with them. "Pct.YAG.EQU" member refers to "BW.YAG.EQU" within it's member formula. Also, notice "Pct.YAG.EQU" comes after "BW.YAG.EQU" Any other thoughts. Really appreciate all your help in this matter. Thanks

I have 6 dimensions. Two of them are dense and are tagged as Accounts and Time.The dimension I am having problem with is called "Metrics". It was originally dense. But because the calc scripts were executing slowly, I decided to make "Metrics" a sparse dimension. Now the calc scripts are all executing pretty fast. However, I now have data issues.For example:Within Metrics, I have a hierarchy that looks as follows:Metrics Input.Amount ~ BW.YAG.EQU Dynamic Calc, Two Pass Pct.YAG.EQU Dynamic calc, Two Pass.Both of these Members have a member formula associated with them. "Pct.YAG.EQU" member refers to "BW.YAG.EQU" within it's member formula. Also, notice "Pct.YAG.EQU" comes after "BW.YAG.EQU"Any other thoughts.Really appreciate all your help in this matter.Thanks

Dynamic calc member formula problem

Hello Gurús!
We are using a member called "Full Year" that is a Dynamic calc with a member formula that calls another dynamic calc. For any reason, it is not working when we try to retrieve it from Excel Add-in.
Any ideas? Any problem for put a Dynamic Calc as member formula of antoher Dynamic calc?
Thanks for your time!
Regards,
Ariel

that can be the problem, depending on what dimension they are in, the order the two pass occurs could couse you issues. In cases like this I've had to put the entire calculation into the member I wanted to calculate and bypass the dependency

DATACOPY from Dynamic Calc Member not working

Hello,
I have a BR to Copy from one Scenario to another. I let the user chose the Scenario via RTP. When they chose a dynamic calc scenario no data is copied.
Here is the Rule
SET CREATENONMISSINGBLK ON;
SET COPYMISSINGBLOCK ON;
FIX(Dec, "Daten brutto", "Daten_brutto_P_M")
DATACOPY [TEBIT_COPY_Year_Source]->[TEBIT_COPY_Scenario_Source]->Final TO [TEBIT_COPY_Year_Target]->[TEBIT_COPY_Scenario_Target]->Version_1;
ENDFIX
I fix on some specific Members an then copy from a specific Year->Scenario combination the Final Version to another Year->Scenario combination Version_1. Doing this with a store Scenario works, with a dynamic calc Scenario it doesnt.
Thx for your Help.

Kevin,
Unfortunately, I think this is the way it works. DATACOPY will not copy dynamically calculated members to stored members.
Although it is not in the DATACOPY Tech Ref documentation, that's the way it works.
Here are some older threads on the "other" board:
http://www.network54.com/Forum/58296/thread/1184768427/DATACOPY+Help
http://www.network54.com/Forum/58296/thread/1054220911/Datacopy+Problem
You are going to have to come up with another way of copying the Scenario by summing the members into the target Scenario. It can be a pain because you're going to have to mind the creation of the blocks. SET CREATEBLOCKONEQ will be your friend on this one.
Regards,
Cameron Lackpour

Replicated Partition - Dynamic Calc member

I am trying to do a replicated partition where the source has 5 dimensions (Time, Account, Country, Product and Scenario) and the target has 4 dimensions (Time, Account, Country and Scenario).
I am trying to map "Product" to "void" because it's not needed in the target. However, Essbase won't let me because "Product" is dynamic calc.
Does replicated partition not allow dynamic calc members? In this case I am mapping that to "void", why would that matter?

What error is it giving you? I have a similar situation in which I am using a replicated partition and mapping a dynamic calc dimension to (void). It seems to be working fine for me.

Function @Parent with Member Dynamic calc

Hi Everybody,
I have a simple Business Rule where i need to assign the Parent value to a child. The parent is a Dynamic Calc and using the function @Parent Essbase doesn't retrieve the data. The formula is as follows:
Fix (
Account_1,
product_1
Version_X = @Parent(Currmbr(Account))->@Parent(Currmbr(product))->Version_Y;
Endfix
The parent of Account_1 is a Dynamic Calc member. I already tried with @Parentval, but it isn't the solution.
Thank you all guys
Maurizio
Maurizio

Thanks for your reply Soul but it didn't work in my case. I tried using @Ancest function but when the business rule is launched Essbase returns missing value. The member on which i'm assigning value is a Sparse Dimension Member (Version) whereas the Dimension member from which i'm trying to retrieve value (Dynamic Calc Member) is a Dense Dimension Member (Account).
I also tried the SET FRMLRTDYNAMIC....
Thank you anyway.... if you have any other idea please tell me... otherwise i will have to use @Sumrange function to obtain the value of the childrens of that Account Member.
Tks
Maurizio

Data not replicated with partition and dynamic calc

HI
I am using Essbase 11.1.2.1.
I want to use a replicated pratition wetween two Essbase BSO applications.
But in my source application, I have to send an account ACCOUNT (level 1) with several stored members and 1 dynamic calc member with formula. Due to this Dynamic calc account, the partition doesn't work (data are not replicated).
How could I do?
Thanks
Fanny

You're right, dynamic calc account are not issues. I am using them in partition.
But py issue is there :
The source dimension is like this :
TAX (Dynamic Calc)
- 6xxxxxxx
- 6yyyyyyy
- 6zzzzzzz (Dynamic Calc) = formula
The target dimension is like this :
TAX
And so I need to send TAX (Source) to TAX (cible).
I don't think it is possible, but I would like a confirmation before using something else.
I hope it is clearer now.
thanks
Fanny

Unable to use Dynamic Calc members on webform Column.

Hi All,
I am getting an error 'invalid webform' if i keep a dynamic calc member in webform column. For example if i keep scenario "Variance", a dynamic calc member with a formula "Actual -Budget" on webform column, the form is giving me the error.
What could be the issue. I am using 11.1.2.1. It is working fine in our old version 9.3.1.
Many Thanks

Have you checked the essbase application log as it may be generating an error, could need the cache increasing.
Cheers
John
http://john-goodwin.blogspot.com/

6.5 vs 6.2 Dynamic calc member in basis of @allocate function

Similar Messages

Maybe you are looking for