6.7 Screen Painter error

Hi all,
I've just installed SBO version 6.7 and when I try to run the Screen Painter I get the following error message:
Run-time error '-7000' (ffffe4a8)':
Form - Invalid
No forms have been opened, the error message displays when I click on the screen painter option in the menu. Does anyone have any suggestions of what's gone wrong? Perhaps I've installed 6.7 incorrectly?
Lita

I think the problem was fixed when I got SBO licensed? The 2004 version will not let you do things like upgrade to a patch unless you have a licensed version.

Similar Messages

Screen Painter Error

Hi friends,
I am trying to load this "Screen Painter Layout" thingy from se80 but I always seem to have an error loading the graphical mode and brings me to the alphanumeric mode.
The error message goes something like " gnetx.exe : No response from Graphic screen painting - Exiting "
Any one has any idea why its doing this? Thanks in advance
Regards,
r3venant

It should be ur GUI problem.
Ask ur admin guy to reinstall and the first aid is to relogin by closing all the sessions and try again.
Regards
Gopi

ABAP : Screen Painter error

Hi Experts ,
I need your help. Actually i have started working in ABAP as welll. need to know that below is the coding being done for Screen Painter and need your help in troubleshooting error. the Error is :
"Program ZSCREENPAINTER1
"TYPE LINE" or "LIKE LINE" expected, not "BEGIN". ."
coding that i have done is :
PROGRAM ZSCREENPAINTER1.
DATA : OK_CODE TYPE SY-UCOMM,
types: BEGIN OF EKPO,
       EBELP TYPE EBELP,
       BUKRS TYPE BUKRS,
       WERKS TYPE WERKS,
       MATKL TYPE MATKL,
       END OF EKPO.
thanks & regards ,
M.S

just to add to all these answers..
'.' (Dot) acts as end of statement in ABAP as ';' works for C..
and ':'(colon) is used for pipeline or chaining more than one statement.. and chained statements are joined using ','(comma)
so
left side : right side1,
             right side2,
             right side3.
"this actually means..
left side right side1. " ends here
left side right side2. " ends here
left side right side3. " ends here
hope you understand now... its BASIC abap...

Screen Painter error when click or moving objects

Hi all,
from the last two or three releases of SAP B1, i get an error when i try to click with the mouse over a control in screen painter.
The object over i click on, become very large (width = large int) and the same with the top property.
Any suggestions ?
Thanks in advance.
Fausto.

Fausto,
Have you tried uninstalling and reinstalling the screen painter?
Eddy

Screen painter error: EU_SCRP_WN32 : timeout during allocate / CPIC-CALL

Dear all
When i using SE51 to open any screen , the screen painter can't give me the graphical layout editor and shows the following message:
EU_SCRP_WN32 : timeout during allocate / CPIC-CALL: 'ThSAPCMRCV'
Message no. 37033
Anyone knows what is the problem?
Detail information :
SAP GUI Version : 710 for window
Fatch Level : 11
thanks for your input.

Dear All... I had same problem for many mounths... My solution has been the "NAME" of my computer. My name contains a special char ( ì ) and the server didn't answer at my "request" to launch the screen painter SAP.
So try to change your "PC-Name" without special char (ex: "office") and try again to launch the Screen Painter.
I'm sorry for my bad english and i hope this reply will be usefull for You.
Paolo
ITALIAN VERSION:
Ciao a tutti, io ho avuto questo problema e non sono riuscito a trovare risposta; nelle innumerevoli ricerche in rete, con colleghi e persone più esperte di me sono riuscito a capire che lo Screen Painter di SAP in realtà è una sorta di "richiesta" che viene fatta al server. Se il Nome del PC contiene caratteri speciali, il server sembra non rispondere e quindi si va in timeout.
In pratica ho risolto formattando il PC ed in fase di re-installazione de S.O. ho dato come nome solo il mio nome di battesimo ed ho risolto. Ho dovuto effettuare un Format perchè nonostante avessi cambiato il nome del PC da schermata di Windows, la modifica non sembrava essere effettuata correttamente.
Ho testato questo problema su diversi computer e il problema si è sempre risolto in questa maniera.
Spero che questo contributo sia utile a tutti Voi.
Rimango a disposizione per qualsiasi chiarimento.
Paolo

Graphical Screen Painter error

When i try to create a screen, the system show a message timeout loading gaphical screen painter, and open a screen painter alphnumeric.
I try this in minisap 6.1 and netweaver, using sapgui 6.4.
Guive me sugestions o solve m problem.
Regards, thanks.

Hi Janish,
Reinstall your SAP "Front End"
Regards
Allan Cristian

Error while opening a screen painter

Hi all,
I am trying to modify a screen in SE80. But when i am clicking on the screen painter it shows 'EU_SCRP_WN32 : timeout during allocate / CPIC-CALL: 'ThSAPCMRCV'
Message no. 37033. Please let me know how to resolve this issue. Thanks a lot for your help!
Regards,
Priti

For the Future Problem Facers:
I too faced the same problem and the below steps helped me.
Re: SFLIGHT is NOT defined for the current logical database.
You can check the completeness of the program installation by starting the program gneux.exe locally in the SAPGUI directory (for example, by double-clicking on the program name in the Explorer window).The Layout Editor is displayed with German texts and an empty drawing area for the pseudo screen EUSPDYND 0000.
If the installation is not complete, an error dialog box provides information regarding the cause of the error, for example, sometimes the DLL eumfcdll.dll is missing after reinstalling the SAPGUI. For example, the eumfcdll.dll DLL was sometimes missing after the SAPGUI was reinstalled.

Error in screen painter

Hi all,
I am trying to open layout in screen painter SE51, but i am not able to open it.Instead some editor type screen is opening .
Also I am getting error ' EU_SCRP_WN32:timeout during allocate/CPIC-CALL:'ThSAPCMRCV''.
Can anyone please tell me the solution to this problem ?
Thanks

hi Meena,
There some problem with the installation of GUI ... Contact your basis consultant in this regard...
Regards,
Santosh

Error Installing Screen Painter

Hi..
I have upgraded my SAP B1 to PL 42 but getting error when installing screen painter of this version....
Thanks..
Edited by: Pari Minhas on Nov 3, 2008 11:53 AM

hi,
please once again you unistall ScreenPainter and refresh the company.
then
goto:
C:\Program Files\SAP\SAP Business One
here you can find two files called
AddOnsInstall.sbo and AddOnsLocalRegistration.sbo
delete these two files and install the screenpainter once again.
regards,
varma

ERROR: password is router string,cannot start graphical screen painter

Hi Exprtts,
I remotely Login SAP at home and I want to edit the screen by screen painter. But the system pop-up a message : password is router string,cannot start graphical screen painter. But at office I can start the screen painter and edit the screen.
Any one can tell me why and how to solve this problem??Thanks in advance.
Joe

Dear Allen,
Please have a look at Below Note
SAP Note 898102 - Error message "Password in router string."
Solution in Note is given as below.
SAPGUI Release 620: Import GUI patch 59.
SAPGUI Release 640: Import GUI patch 16.
SAPGUI Release 710: Import GUI patch 03.
Hope This Solve your Issue.
If required also See OSS notes 204910 and 101971
Regards,
Lijo joseph
Message was edited by:
Lijo Vazhappilly

Screen painter initializing error.

Hi all,
This is an error that i am facing while starting screen painter.When starting screen painter from Add on manager it says
User has no license for screen painter.Where as i have allocated addon license from addon manager to user.
I am using SAP B1 2007b Pl 11,MSSQL 2005
With regards ,
Debabrata Kumar

Hi Debabrata Kumar,
Have you also assigned SDK license to the same user? I believe Screen painter need SDK license too.
Thanks,
Gordon

Issue with Screen Painter Add-On after patch updation

Hi Experts,
We are using 2007 B PL10. We upgraded to PL 11 and now we are getting the following error while trying to start the Screen Painter Add-On.
"Wrong Executable digital signature for Add-on"
Please help!
Thanks in advance
Ajith G

Hi Ajith,
Check the thread
Installing addons on client
Regards
Jambulingam.P

ABAP Dictionory type FLTP is nt allowed for screen Painter!!

Hello All,
ABAP Dictionary type FLTP is nt allowed for screen Painter!! am getting this error message if am giving some input.
Thanks
santu
Edited by: santu4u on Oct 23, 2009 1:48 PM

Hi
Instead of FLTP use Quantity or Currency or Packed Decimals type fields for the Screen Elements.
While you save the data into the database if the database field is of type FLTP the values entered would be automatically converted into FLTP type. We need not take care of this.
---?? What do you mean by IDES version --->
You mean in SE11 or SE16, Wherever it may be you can not use FLTP type on Screen Fields.
This is Standard SAP Procedure, As mentioned Above you can use Packed Decimals or Currency or Quantity Fields
Cheers
Ram
Edited by: Ramchander Krishnamraju on Oct 23, 2009 2:10 PM
Edited by: Ramchander Krishnamraju on Oct 23, 2009 2:13 PM

SCreen Painter working not correctly.

Hi,
In se53 when we go to screen painter it's not coming properly..
some line is coming.
and we got EU_SCRP_WN32 : timeout during allocate / CPIC-CALL: 'ThSAPCMRCV' error message.
we have sap gui 710 with patch level 7.
the dumpfile also generated.
Runtime Errors STORAGE_PARAMETERS_WRONG_SET
Date and Time 22.07.2008 12:44:27
Short text
The system is configured incorrectly.
What happened?
The current program had to be terminated because of an
error when installing the R/3 System.
The program had already requested 453411792 bytes from the operating
system with 'malloc' when the operating system reported after a
further memory request that there was no more memory space
available.
What can you do?
Note which actions and input led to the error.
For further help in handling the problem, contact your SAP administrator
You can use the ABAP dump analysis transaction ST22 to view and manage
termination messages, in particular for long term reference.
In the system profile, set the parameters
-abap/heap_area_dia and
-abap/heap_area_nondia
to a maximum of 453411792. To be on the safe side, reduce the value by 10,000,
000.
Then restart the SAP system.
Error analysis
When the program was running, it was established that more
memory was needed than the operating system is able safely
to provide. To avoid a system crash, you must prevent this
situation from occurring.
Last error logged in SAP kernel
Component............ "EM"
Place................ "SAP-Server mtw02sdec01_DE7_00 on host mtw02sdec01 (wp
1)"
Version.............. 37
Error code........... 7
Error text........... "Warning: EM-Memory exhausted: Workprocess gets PRIV "
Description.......... " "
System call.......... " "
Module............... "emxx.c"
Line................. 1881
The error reported by the operating system is:
Error number..... " "
Error text....... " "
How to correct the error
Report the error to the group responsible for installing your
R/3 System.
Please help.
regards
deepak

Dump is telling you what to do...
Review abap/heap_area_dia and abap/heap_area_nondia
I presume you try that before posting right?...
Whats the issue then?
Regards
Juan

[Help]Screen Painter

Hi experts,
Lately I'm using PL07 and now I uninstalled my SAP Client and installed PL04 after that, I'm having a problem with Screen Painter. Please check the image below. Help me about this.
http://www.webforone.com/images/5dwd2lodq9rsjs3aiaf.jpg
Thanks,

hi hikaru,
Symptom
Add-on fails to upgrade on the client when there is a new add-on version available on the server in the common DB.
SAP Business One displays an error message:
"Add-on <Name of add-on>: Add-on installation failed because another version is already installed. Please ensure that the version number is higher than the version previously installed."
Add-on status is then set to pending.
Cause
Consulting.
This issue occurs when both of the following conditions are met:
There is a version of the add-on available on the server in the SARI table of the common DB that is newer than the one on the client.
The server name or IP address registered in the AddOnsLocalRegistration.sbo file on the client for this add-on is different than the name or IP address registered with the license server for the SAP Business One database server.
For example, this issue can occur after upgrading to SAP Business One 8.8 and "(local)" is listed as the server name in the AddOnsLocalRegistration.sbo file. But according to new security policies, "(local)" is no longer a valid server name and the server name registered with the license server will have changed when upgrading to release 8.8.
The following would occur in such a case:
The SAP Business One 2007 client connects to the (local) server.
The client registers an add-on from the server.
The server is upgraded to release 8.8, and is registered with the license server with an IP address or server name. The client upgrades to release 8.8, and continues to work with the same server. The local AddOnsLocalRegistration.sbo file is unchanged by the upgrade.
The add-on is upgraded on the server.
At the next logon, the client checks the version of the add-on on the server and finds that it has been upgraded. The client attempts to upgrade the add-on using the information in the AddOnsLocalRegistration file. But the upgrade fails because the server name in the file is incorrect.
Solution
(1) Open "AddOnsLocalRegistration.sbo" file
(2) Locate the "Common" node under the "AddOn" node and update the "Name" Attribute to the DB Server machine name which is currently used.
(3) Repeat step(2) to update the "Name" Attribute for all AddOns.
(4) Lanuch the SAP Business One and AddOn should upgrade as usual.
Other terms
SAP Business One client, AddOnsLocalRegistration.sbo, add-on upgrade, 8.8 add-on upgrade fails
regards,
Fidel

6.7 Screen Painter error

Similar Messages

Maybe you are looking for