6.84, Vista and N95 - Still not working

I was kind of hoping that 6.84 would be the answer to a few problems however there are still problems with the Nokia Flagship and Microsofts Flagship OS.
The Driver for the "Nokia N95 Bluetooth Modem" still is not supported comes up with Code 10 Error. Driver is not automatically detected by windows. I manually used "Nokia Phone Bluetooth Modem" which works OK.
The other Bluetooth Services such as OBEX still do not have drivers available for them.
Still appears to be Malfunctioning really. IMO Perhaps its wise to make sure things interwork with each other rather than rushing to bring them out.
Shunts...
I will mostly be communicating with a Nokia E72 Zodium Black
Nokia E72-1 with Vr 051.018.207.04 Software
If this post helped... Add some kudos!!

I mean that the system is unable to initalise and install device driver for "Bluetooth perhiperal device".
If the stack is unable to support the profiles then the phone should not request them.
Also the driver that is "Nokia N95 Bluetooth" Does not work under Vista - I suspect that its a Windows XP Driver, because it comes back with "Code 10 This device cannot start"
Come on now, Vista has been in Beta for ages and RTM for at least six months there is really no excuse for it.
Shunts...
I will mostly be communicating with a Nokia E72 Zodium Black
Nokia E72-1 with Vr 051.018.207.04 Software
If this post helped... Add some kudos!!

Similar Messages

  • TS1814 I have windows vista and this did not work for my ipod it still will not update PLEASE HELP!

    I have windows vista and this did not work for my ipod it still will not update PLEASE HELP!
    iTunes for Windows: iTunes cannot contact the iPhone, iPad, or iPod software update server

    Try this:
    Close your iTunes,
    Go to command Prompt -
    (Win 7/Vista) - START/ALL PROGRAMS/ACCESSORIES, right mouse click "Command Prompt", choose "Run as Administrator".
    (Win XP SP2 n above) - START/ALL PROGRAMS/ACCESSORIES/Command Prompt
    In the "Command Prompt" screen, type in
    netsh winsock reset
    Hit "ENTER" key
    Restart your computer.
    If you do get a prompt after restart windows to remap LSP, just click NO.
    Now launch your iTunes and see if it is working now.
    If you are still having these type of problems after trying the winsock reset, refer to this article to identify which software in your system is inserting LSP:
    iTunes 10.5 for Windows: May see performance issues and blank iTunes Store
    http://support.apple.com/kb/TS4123?viewlocale=en_US

  • I downloaded Elements 13 to my PC, but my PC has windows Vista and it does not work.  How can I download it to my laptop that has Windows 8?

    I downloaded Elements 13 to my PC, but my PC has windows Vista and it does not work.  How can I download it to my laptop that has Windows 8?

    You can get it at this link and validate with your 24 digit serial number - click here for PSE downloads

  • I downloaded Lightroom version 5.7 in order to support tethered capture on my Nikon D750 and its still not working. Additionally when I was prompted to give my serial number for the update it was no where to be found on my Adobe profile although I purchas

    I downloaded Lightroom version 5.7 in order to support tethered capture on my Nikon D750 and its still not working. Additionally when I was prompted to give my serial number for the update it was no where to be found on my Adobe profile although I purchased, and am paying monthly for my creative cloud for photography. Please help

    Does your Cloud subscription properly show on your account page?
    If you have more than one email, are you sure you are using the correct Adobe ID?
    https://www.adobe.com/account.html for subscriptions on your Adobe page
    If yes
    Some general information for a Cloud subscription
    Cloud programs do not use serial numbers... you log in to your paid Cloud account to download & install & activate... you MAY need to log out of the Cloud and restart your computer and log back in to the Cloud for things to work
    Log out of your Cloud account... Restart your computer... Log in to your paid Cloud account
    -Sign in help http://helpx.adobe.com/x-productkb/policy-pricing/account-password-sign-faq.html
    -http://helpx.adobe.com/creative-cloud/kb/sign-in-out-creative-cloud-desktop-app.html
    -http://helpx.adobe.com/x-productkb/policy-pricing/activation-network-issues.html
    -http://helpx.adobe.com/creative-suite/kb/trial--1-launch.html
    -ID help https://helpx.adobe.com/contact.html?step=ZNA_id-signing_stillNeedHelp
    -http://helpx.adobe.com/creative-cloud/kb/license-this-software.html
    If no
    This is an open forum, not Adobe support... you need Adobe staff to help
    Adobe contact information - http://helpx.adobe.com/contact.html
    -Select your product and what you need help with
    -Click on the blue box "Still need help? Contact us"

  • HT1430 When charging my Ipad mini, it turned off and its still not working, what do i do pls??

    When charging my Ipad mini, it turned off and its still not working, what do i do pls??

    First, try a system reset.  It cures many ills and it's quick, easy and harmless...
    Hold down the on/off switch and the Home button simultaneously until you see the Apple logo.  Ignore the "Slide to power off" text if it appears.  You will not lose any apps, data, music, movies, settings, etc.
    If the Reset doesn't work, try a Restore.  Note that it's nowhere near as quick as a Reset.  It could take well over an hour!  Connect via cable to the computer that you use for sync.  From iTunes, select the iPad/iPod and then select the Summary tab.  Follow directions for Restore and be sure to say "yes" to the backup.  You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod.  Again, say "yes."
    At the end of the basic Restore, you will be asked if you wish to sync the iPad/iPod.  As before, say "yes."  Note that that sync selection will disappear and the Restore will end if you do not respond within a reasonable time.  If that happens, only the apps that are part of the IOS will appear on your device.  Corrective action is simple -  choose manual "Sync" from the bottom right of iTunes.
    If you're unable to do the Restore, go into Recovery Mode per the instructions here.

  • TS1292 My iTunes  will not work at all I've had 7 different people try it and its still not working

    My iTunes  will not work at all I've had 7 different people try it and its still not working

    Cconnect it to your computer with the latest version of iTunes installed.

  • After successful installation of iTunes 10.6.1, iTunes will not open.  Tried complete uninstall and reinstall, still not working.  Cannot sync iPad or access iTunes at all.  Any suggestions?

    After successfully installing the iTunes upgrade to 10.6.1, Now I cannot open and access itunes.  I have tried a complete uninstall and reinstall and it is still not working. I have looked through many support communities for answers.  I added an iPad 2 almost a year ago and all was fine until my upgrade to the "cloud services" and upgrade to new version.  I have been without iTunes on my PC for a month.  Any suggestions on how to resolve this issue?

    I too have only recently encountered this problem. I have been able to burn disks before but it keeps making all these weird sounds. It might be a hardware problem but the fact that everything else that uses a disk works I doubt it.

  • Windows Vista and iTunes does not work

    First Time sorry for my bad English, I'm from Germany and my English is not the best.
    I have the new Windows Vista but iTunes does not work good.
    And I have to use it, to manage my music on my iPod.
    When there will be a Vista compatibles Version of iTunes??
    And when will come an 64-Bit Version?
    Thanks for Help,
    Karsten

    iTunes running under VISTA does not recognize media burned by iTunes Backup (v7.0.2) from a non-Vista machine.
    The original machine recognizes the media just fine, but the new VISTA machine does not recognize the dvd at all.
    Anyone else having a problem with VISTA recognizing burnt media?

  • I have a 32gb iphone 5 the wifi signal is bad and the time doesnt work can someone help i did everything thats in my hands and its still not working

    I have a 32gb iphone 5 the wifi signal is bad and the time doesnt work can someone help i did everything thats in my hands and its still not working

    Do you experience the same issue on other WiFi networks?
    Do any other iOS devices experience the same issue on your network?
    Make sure you follow all steps provided in the article below:
    iOS: Troubleshooting Wi-Fi networks and connections

  • When connecting my ipod nano (5 gen) I get an error messege saying that it was recognized but not properly. Ive tried everything the support site says and it still not working. What do I do now?

    When connecting my ipod nano (5th gen) I get an error messege saying that it was recognized but not propperly. I treid everything that the support site said to do but it still not working. What do I do no?

    This came from another thread, but worked for me.  Problem is with newest iTunes 4.62.  Unistall iTunes, as well as its helper programs (Apple Application Support, Apple Mobile Divice Support, and Apple Software Update).  Reboot, and reinstall iTunes.  It will reinstall all the other ones and you should be able to connect your nano.  Good luck.

  • My ipod is not working it shows ipod is disabled but i tried everything to recover it and its still not working what do i do now

    i tried everything to disable my ipod but ti still shows ipod is disable

    Disabled
    Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
    iOS: Forgot passcode or device disabled
    If recovery mode does not work try DFU mode.                        
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings        
    For how to restore:                                                             
    iTunes: Restoring iOS software
    To restore from backup see:
    iOS: Back up and restore your iOS device with iCloud or iTunes       
    If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
    You can redownload most iTunes purchases by:           
    Downloading past purchases from the App Store, iBookstore, and iTunes Store        
    If problem what happens or does not happen and when in the instructions? When you successfully get the iPod in recovery mode and connect to computer iTunes should say it found an iPod in recovery mode.

  • 4.0 EA3 -- SQL Server Drag and drop still not working

    My clients love SQLD D because they can access SQL Server and Access as well as Oracle of course.
    Drag and Drop of tables  from the table view have not worked in a while.
    appear to only see things in the Master Database. Even if you retrieve the list of databases and set you still en up only in the MASTER.
    You then have to fully qualify to retrieve a table.

    What exactly is your question here?

  • Bluetooth Mouse and keyboard STILL Not working can someone help me?

    i have an apple Bluetooth Keyboard and wireles mighty mouse. Since i have installed leopard months ago it was working fine but then my mouse and keyboard stopped pairing with my Powerbook it recognises the devices but the refuse to pair i changed the batteries and installed the software that cam ith the keyboard and mouse and still nothing works.
    Can someone help me please

    After updating to 10.5.2 I am still experiencing problems with my Apple wireless mouse and keyboard. This is a Leopard issue ( here is just one blog on the topic
    http://aralbalkan.com/1086 ) in 2005 I purchased a Mac Mini which I love and never experienced a Bluetooth problem till I installed Leopard several months ago, now at least once a week, on average 2-3 times a week, I loose connection with the keyboard or the mouse and it takes awhile to re-establish the connection. I was hoping the last upgrade would address this issue but no such luck.

  • HT3258 my software is correct and it still not works

    i was about to install the new software and then suddenly this message popped out and said my software is wrong mine isn't i checked like 5 times and when i searched for the needs to be updated folder i couldn't find ANY results thanks to apple now i cant get the new software HELP ME

    Try:                                               
    - iOS: Not responding or does not turn on           
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try another cable              
    - Try on another computer                                                       
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar                                     

  • I was changing my iphone 4 font when it was downloading the apple came out and now i cant do nothing with it the apple has been there all night i have turned it off and on and it still not working how do i fix that

    i was changing the font on my iphone yesterday and the apple came out saying it was going to respring or restart springboard i dont really remember now it has not came on since yesterday i have turned it off and on a couple of times and it does not do nothing the apple comes up and it seems like its going to start up but it freezes what do i do to fix it i really need my phone i have a child and im by my self most of the time with my son

    Is your iPhone jailbroken? If so see: http://support.apple.com/kb/HT3743

Maybe you are looking for

  • I upgrated for the latest version of itunes and now my Macbook Pro its 1000000 time slower

    I downloded some update for the Itunes, and now my Macbook Pro its toooooo slow, I dont know what do to anymore. I even reinstalled the whole system. Can anybody help me???

  • Blue screen of death if I have photos on my iphone 3gs!

    Hi all, Need a little help. If I have photos on my camera roll and I plug the iphone into my laptop I get the BSOD. If I then delete the photos off the iphone and plug into my laptop all is fine. I only get a problem when I have photos on the iphone.

  • Switch profile peers not reachable

    Hello: I have a couple of N5k 5.2(1)N1(1). I'm trying to create a switch profile for all vPC configuration. They are connected to a OOB network through their mgmt0 interface, and ping is succesful. However, the show switch-profile status command show

  • Program BBP_UPLOAD_PAYMENT_TERMS

    Hi experts I have a job for BBP_UPLOAD_PAYMENT_TERMS that transfer new payment terms created in R/3 to SRM, the problem is for each time the program rum the payment terms of vendor master data in SRM in transaction BBPMAININT. Is it a bug? Thanks Nil

  • TabIndex not working

    I have an application that I am creating in Flex Builder that uses swc components from Flash created using the Flex Component Kit. Those components have text input fields in them from Flash. The trouble I am having is when I try to set the tabIndex o