6 in 1 card Reader not found after installing Windows 8 - HP Pavillion Dv6

I am running a dv6874ca and after installing Windows 8 the 6 in 1 card reader no longer works - the system does not read any information. I cannot find the card reader in the device manager. 
Note: I am trying to view a Sony Pro Duo card which was possible before installing Windows 8. The only item that appears under "disk drives" within the device manager is my hard drive. 

Try these drivers:
ftp://ftp.hp.com/pub/softpaq/sp45001-45500/sp45112.exe
I am an HP employee.
Regards,
Vidya
Make it easier for other people to find solutions, by marking my answer “Accept as Solution” if it solves your problem.
***Click on "Thumbs up" button to the bottom right side of my post to say thanks!***

Similar Messages

  • Microphone not found after installing Windows 8.1

    My PC was purchased in Greece 5-6 years ago (I don't remember exactly)
    Initially, it came with Windows 7 and later on I  upgraded it to Windows 8 with no problems at all. Then, on January 2014  I installed Windows 8.1, and as aresult my microphone is not working any longer. Apparently, HP is not supporting it any longer with new drivers. Any ideas?
    Thanks in advance
    Stavros

    Hello @stavrosv52,
    I understand that you are not able to use the microphone on your desktop computer, and I would be happy to help you!
    Since there are no supported drivers for your Microphone in Windows 8 or 8.1, I recommend re-installing Windows 7 once again on your computer. You can attempt to re-install Windows 8, but there is no guarantee the microphone will work, as there are no supported drivers for that operating system as well.
    Best Regards  
    MechPilot
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the right to say “Thanks” for helping!

  • HP Deskjet Ink Advantage K209a Driver not found when installing windows 8

    MY  PRINTER " HP Deskjet Ink Advantage K209a"  OPERATING SYSTEM  Windows 8 32 bit
    Driver not found when installing windows 8 .So,please give me a suggestion & give me new driver for win 8.
    [Personal Information Removed]
    Please give me a suggestion

    Hey 101214,
    I see you have a Windows 8 PC and a Deskjet Ink Advantage All-in-One printer (K209a).  I also see that you need a driver link for this OS and Printer.  Please follow the link below to download the driver for this printer/OS combo.
    http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=al-109242-1&cc=us&dlc=en&lc=en...
    If you need information on how to perform the USB installation on your Windows 8 PC please click here.
    I wish you the best!
    Jason
    -------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------
    I am not an HP employee.

  • Windows XP drive not found after install

    After installing Windows XP on boot camp, I have found that the computer will restart and then fail to find the drive I have just installed windows on giving me an error message something like "Cannot locate boot disk". If i restart into OSX then it finds the drive but i cannot boot into windows because it will just display the error message. If i try installing Vista this works fine but Vista is shockingly awful and i would sooner have XP. Any ideas??

    Evening all
      Have you disabled any Norton, KAS, antivirus anti spyware programs?
      Did you set a restore point prior to installing the Sp3?
     Which method did you install the Sp3 from? full adminstrator account or apply the subinacl program and reset.cmd ?
      There may be other problems prior to install of Sp3, Are the bios,of the systems you are using, the latest version?
      What type of system are you using?
      Are you using the latest W.H.Q.L. Microsoft signed drivers video available for your system? 174.74 from Nvidia, 8.4 catylst for ATI/AMD?
      If you are using X2 processor both the processor driver and the dual core optimizer. You cannot depend on the Sp2 driver for proper operation.
      What about chipset drivers?
      And the mouse, and other perpherials?
      If you have any unsigned drivers you will have endless reboots.
      If you check the system to see if safe mode is available you can trouble shoot what is happening
    *Press f8 prior to the Windows splash screen*
     Log in as adminstrator *Full one*
    If you are using an AMD machine, check the regedit for the following key
    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Intelppm\Start
    If this key exists change it to 04 Hexdecimal and reboot.
     as seen here
    http://forums.microsoft.com/TechNet/ShowPost.aspx?PostID=3072752&SiteID=17
     If you are still having problems see follow the advice at the end of this posting and add what problems you are having. And send the logs after a MSFT team member responds with an address.

  • Envy 15 laptop will not shutdown after installing windows 10

    After installing windows 10, laptop will not shutdown , and cannot wake from sleep mode. I have to hold power button in to turn off .

    corsairman wrote:
    I just upgraded my laptop to Windows 7 and was advised to upgrade my printer driver for the Photosmart 3210 to a Windows 7 driver. After installing my printer will not duplex. On the printer preference page the box shows two sided duplexing (two sided).
    Can you help, also when I had Vista installed the 2nd page printed upside down. I have tried to get the patch for this, but cannot find it.
    You may need to enable the duplexer hardware as described in the Vista Duplex Printing Troubleshooting Guide.  There is also a link there to the patches for Vista back side upside down. When you have the duplexer enabled please post here about the results printing a duplex page.  If the back side is upside down the Vista patch can be applied.
    Bob Headrick,  HP Expert
    I am not an employee of HP, I am a volunteer posting here on my own time.
    If your problem is solved please click the "Accept as Solution" button ------------V
    If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

  • ACR122U smart card reader not recognized after reboot...

    I am new to POS Windows and have been working with wondows for ever. I was using ACR 122u contactless usb smart card reader with windows XP and communicating with it using java with no problems. Then our I changed the OS to windows Pos ready 2009 and we found out that USB card reader has to be unplugged and plugged back in after rebooting the computer. other than the OS everything else is identicle (driver, reader, java program, ect..). Can any one tell me what could cause this problem and what I can do to solve this.
    I have cheked the device manager and under USB controllers it says that it is unrecognized deivice..I tried changing the reader, changing the port and(actually the reader is pluged in to a linksys external usb hub, but changing this to a internal port did not make any difference)  tried chagning some settings in control panel.
    1. I checked the power option of the root usb hub.
    2. Changed the driver.cab to a normal driver.cab obtained from the normal xp version. Uninstall the driver and reinstall it.
    So far this hasnt been working.
    I hope someone could help me with this.
    ~Tharanga

    After extensive tests with Win 7 Embedded and ACR122U, I can confirm the same problem. It seems that reader firmware hangs and the only way to recover is to unplug and plug again the reader. We shall repeat the tests with readers from other manufacturers.
    For the tests, we use a Win7 Embedded Standard PC with an ACR122U connected. We installed and configured the ACS Monitor program to start automatically with windows. We made a small utility to restart the PC every minute and we placed it on the Startup directory.
    Within the first 5-10 reboots, the reader fails and the ACS monitor program shows " No reader connected" and no reaction from the reader. If we shall unplug and plug the reader again to the USB port everything works fine again.
    Kostas P.

  • Creative folders not found after install

    This a dbl post in sme ways. I by accident checked solution on my other post. Any way here is what's going on.
    I found the drivers I was looking for but can't understand why this is happening. After installing I still can't see anything related to Creative when I look in ALL PROGRAMS. This means I have no icon that would allow me to change from Game mode to entertainment. It doesn't even show up that I installed the drivers in the add remove section or anywhere ion the hard drive. So even if I wanted to uninstall the drivers they're no where to be found. But here's the crazy part. My speaker icon in the task bar shows I have sound and that's it's creative.
    What is up with all this. I've found the right drivers and even when I install it will say this.
    Please insert disk that contains the file layout.bin
    I've not expeirenced this since I first purchased the card. The funny thing here is I own about 20 Creative sound cards. Most are new from the Extreme music to the X-fi Titanium all the way back to SB LE on XP machines. All have had one issue or another with the drivers but I figured things out. With this issue I have no clue why nothing shows up. I've used driver sweeper and a reg cleaner I trust and works. I've also contacted support last night asking for help with the drivers. Funny thing is the support rep gave me the wrong ones, talk about not knowing your job. That's when I downloaded the right drivers and end up with this crap of an issue.
    Would like some help from a mod please.
    Window 7 Ultimate 64
    i7 980x @ stock
    EVGA X58 SLI
    2GB of Gskill @ 600
    300GB VelociRaptor-Seagate Terabyte-4 external 2 terabye
    MSI GTX 460 in SLI
    X-fi Fatality- original one from 05-06, the red F on the card still even lights up.. surprised
    860 PC POWER & COOLING
    ASUS VE278Q 27" 2ms
    Logitech 5300Z 5.
    G9x-G5-CM STORM GAME MAT
    That's what I'm running in a nut shell. Thing is I can't understand why the cards not showing up anywhere on my C: drive which is the Raptor. Need help as I need sound. I'm a 39 old gamer and in tourneys right now. Can't have no sound or I die. Also means my team mates can'r hear my either.
    Thank you.

    In all my years of running web sites for PC issues and modding info I've never seen one so useless at this one. Obviously you mods are employeed to look this site over and offer assistance. But as I can see your not doing your job. I can also see this place has no forum guru like most sites do. He or she is usally the one answering the questions because the mods are know where to be found.
    Am I upset yes I am. This card worked the other day but after a reload of Windows not one driver works. I'm not even sure the drivers I found are the correct ones. As stated before I contacted support and was given the wrong drivers to install. In fact simple questions couldn't be answered. That leads me to believe they are not from the U.S. And if they can't understand me why even have support for the U.S. So here I sit with a sound card in a $3,500 PC that I can't do much with because I can't hear anything.
    NO CONSOLE LAUNCHER
    This device supported by this application is not detected. The application will exit.
    Please insert disk that contains the file layout. bin
    I've pt in what model X-fi I have which is SB0466 and takes me to the drivers for that card. I then proceed to DL and then install. After that I get to the panel to check for updates. While their I notice it says my card is a Fatality Champion Series. WOW that's new to me as it doesn't show that in the driver section for my card. Any way while it's looking for updates it comes back and says my card is all up to date. Really now, in the past after installing drivers it would look for updates and say these that are critical need to be installed. It really didn't say that but critical means now in my book. Those that were critical were the the console launcher along with Alchemy and some other update.
    So someone please explain to me and everyone else here why Creative drivers are worse then ex wi'ves. Every time I go to instal a new creative card it's like walking into the house and seeing the now ex and knowing it's going to be a living hell. Problem we have here and I know this for sure is know one knows about these issues. I'm talking about those who monitor companies for lack of keeping the customer happy.
    One more thing that is rediculous. Who set up the section for the drivers. Honestly when you go into the area the listing for X-fi can confuse some. Yes even me who has a high understanding of the ins and outs of computers. And still when you type in the model # of the card it gives you the wrong drivers... unbelievable.
    Very unhappy here as this has happened way to many times with Creative. Glad were having a Tech Trade Show here In Milwaukee April st and 2nd. Companies like ASUS, Coolermaster, MSI and so on will be here. Going to ask ASUS and MSI why Creative cards don't work with their products. I'm also going to ask when has it become the norm to ignore the consumer in forums.
    I'm also going to make a video of me doing the installation of the drivers. It will be for any Creative employee who wants to see that I'm not doing anything wrong.

  • (OEL 4.7) -bash: sqlplus: command not found after install of 10g R2

    Hi all
    I'm new to Linux and I would like your help and directions on a few things:
    After 2 days of battle with RPM's (i386 vs x86_64) i was finally able to install 10g R2 on OEL 4.7 x86_64 system without any errors.
    please check if all these settings are correct and help me how to start sqlplus? or create a database with dbca
    I followed all the directions in Doc ID: 339510.1.
    During installation i choose this path as the ORACLE_HOME
    /u01/app/oracle/product/10.2.0/
    I did not however installed the default database.
    I then ran the two scripts at the end of the installation as root.
    Here are my settings:
    oracle bash_profile:
    # .bash_profile
    # Get the aliases and functions
    if [ -f ~/.bashrc ]; then
    . ~/.bashrc
    fi
    # User specific environment and startup programs
    PATH=$PATH:$HOME/bin
    export PATH
    unset USERNAME
    :q
    ORACLE_BASE=/u01/app/oracle
    export ORACLE_BASE
    ORACLE_HOME=/product/10.2.0/db_1;
    export ORACLE_HOME
    export PATH=$ORACLE_HOME/bin:$PATH
    here is my oracle env result
    [oracle@nycoralp01 /]$ env | grep -i ORACLE
    OLDPWD=/home/oracle/oraInventory
    USER=oracle
    ORACLE_BASE=/u01/app/oracle
    MAIL=/var/spool/mail/oracle
    PATH=/bin:/usr/kerberos/bin:/usr/local/bin:/bin:/usr/bin:/usr/X11R6/bin:/home/oracle/bin
    HOME=/home/oracle
    LOGNAME=oracle
    ORACLE_HOME=/product/10.2.0/db_1
    here is my echo $ORACLE_HOME result:
    [oracle@nycoralp01 /]$ echo $ORACLE_HOME
    /product/10.2.0/db_1
    Can someone please tell me what did i miss or did not set?
    When i try to run sqlplus i get this error
    [oracle@nycoralp01 /]$ sqlplus
    -bash: sqlplus: command not found
    Any help appreciated

    I change it in my bash_profile
    $ vi ~oracle/.bash_profile
    # .bash_profile
    # Get the aliases and functions
    if [ -f ~/.bashrc ]; then
    . ~/.bashrc
    fi
    # User specific environment and startup programs
    PATH=$PATH:$HOME/bin
    export PATH
    unset USERNAME
    :q
    ORACLE_BASE=/u01/app/oracle
    export ORACLE_BASE
    ORACLE_HOME=$ORACLE_BASE/product/10.2.0/db_1;
    export ORACLE_HOME
    export PATH=$ORACLE_HOME/bin:$PATH
    and i'm still getting the same error
    -bash: sqlplus: command not found
    Is there anything else i'm missing? do i have to restart anything?

  • Process.conf file not found after installing Sun One Portal Server 6.0

    This extract is from the Sun One Portal Server development guide for logging error or logs in log file. This says that to generate the log, entry should be done to enable logging in process.conf file. I could not find any such file after installing Sun One Portal Server 6.0.
    Any help will be appreciated...
    Reporting Errors to the Robot Log File
    When problems occur, robot application functions should return an appropriate response status code (such as REQ_ABORTED), and they should also log an error inthe error log file.
    To use the error-logging functionality, you must include the file log.h in thesdk/robot/include/libcs directory. After you have ensured that log.h exists in the correct place, you can use the cslog_error macro to report errors. The prototype is in the following format:
    cslog_error(int n, int loglevel, char* errorMessage)
    The first parameter is not currently used (may be used in the future) You can pass
    this as any integer.
    The second parameter is the log level. When the log level is less than or equal to the log level setting in the file process.conf, the error message is written in the robot.log.

    Since removing the log settings from magnus.conf failed to fix the problem, the log settings are probably not the source of the problem.
    Did anything else - e.g. ColdFusion configuration changes - occur at about the same time you changed the log settings?

  • Error 404--Not Found - After Installing Essbase 11.1.2.2

    Hi,
    I have experienced error.
    I have one box of EPM 11.1.2.2, using Windows 2008. After installing Foundation and configuring it, there's no problem at all. I can open workspace and interop as well.
    However I added Essbase, installing and configuring it. But after installing Essbase, I managed to turn on Hyperion Shared Service again, it didn't work.
    The error says:
    Error 404--Not Found
    From RFC 2068 Hypertext Transfer Protocol -- HTTP/1.1:
    10.4.5 404 Not Found
    The server has not found anything matching the Request-URI. No indication is given of whether the condition is temporary or permanent.
    If the server does not wish to make this information available to the client, the status code 403 (Forbidden) can be used instead. The 410 (Gone) status code SHOULD be used if the server knows, through some internally configurable mechanism, that an old resource is permanently unavailable and has no forwarding address.
    What I have done is reconfiguring Shared Service, Essbase also. But no luck at all.
    Does anybody have the clue, please advise. Thanks.

    Hi John,
    I got error like this on the log:
    <Jun 15, 2012 1:06:18 AM ICT> <Info> <Security> <BEA-090905> <Disabling CryptoJ JCE Provider self-integrity check for better startup performance. To enable this check, specify -Dweblogic.security.allowCryptoJDefaultJCEVerification=true>
    <Jun 15, 2012 1:06:18 AM ICT> <Info> <Security> <BEA-090906> <Changing the default Random Number Generator in RSA CryptoJ from ECDRBG to FIPS186PRNG. To disable this change, specify -Dweblogic.security.allowCryptoJDefaultPRNG=true>
    <Jun 15, 2012 1:06:18 AM ICT> <Notice> <WebLogicServer> <BEA-000395> <Following extensions directory contents added to the end of the classpath:
    C:\Oracle\Middleware\user_projects\domains\EPMSystem\lib\audit-client.jar;C:\Oracle\Middleware\user_projects\domains\EPMSystem\lib\css.jar;C:\Oracle\Middleware\user_projects\domains\EPMSystem\lib\ctg_custom.jar;C:\Oracle\Middleware\user_projects\domains\EPMSystem\lib\ldapbp.jar;C:\Oracle\Middleware\user_projects\domains\EPMSystem\lib\opencsv-1.8.jar;C:\Oracle\Middleware\user_projects\domains\EPMSystem\lib\registry-api.jar;C:\Oracle\Middleware\user_projects\domains\EPMSystem\lib\wlpool.jar>
    <Jun 15, 2012 1:06:19 AM ICT> <Info> <WebLogicServer> <BEA-000377> <Starting WebLogic Server with Oracle JRockit(R) Version R28.2.0-79-146777-1.6.0_29-20111005-1808-windows-x86_64 from Oracle Corporation>
    <Jun 15, 2012 1:06:20 AM ICT> <Info> <Management> <BEA-141107> <Version: WebLogic Server 10.3.6.0 Tue Nov 15 08:52:36 PST 2011 1441050 >
    <Jun 15, 2012 1:06:22 AM ICT> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STARTING>
    <Jun 15, 2012 1:06:22 AM ICT> <Info> <WorkManager> <BEA-002900> <Initializing self-tuning thread pool>
    <Jun 15, 2012 1:06:22 AM ICT> <Notice> <Log Management> <BEA-170019> <The server log file C:\Oracle\Middleware\user_projects\domains\EPMSystem\servers\EPMServer0\logs\EPMServer0.log is opened. All server side log events will be written to this file.>
    <Jun 15, 2012 1:06:58 AM ICT> <Notice> <Security> <BEA-090082> <Security initializing using security realm myrealm.>
    <Jun 15, 2012 1:06:58 AM ICT> <Notice> <Security> <BEA-090083> <Storing boot identity in the file: C:\Oracle\Middleware\user_projects\domains\EPMSystem\servers\EPMServer0\security\boot.properties>
    <Jun 15, 2012 1:07:12 AM ICT> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STANDBY>
    <Jun 15, 2012 1:07:12 AM ICT> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STARTING>
    <Jun 15, 2012 1:07:15 AM ICT> <Error> <JDBC> <BEA-001112> <Test "select count(*) from HSS_COMPONENT_TYPES" set up for pool "EPMSystemRegistry" failed with exception: "java.sql.SQLSyntaxErrorException: ORA-00942: table or view does not exist
    ".>
    <Jun 15, 2012 1:07:43 AM ICT> <Warning> <Munger> <BEA-2156203> <A version attribute was not found in element application in the deployment descriptor in C:\Oracle\Middleware\EPMSystem11R1\products\Essbase\aps\AppServer\InstallableApps\Common\aps.ear/META-INF/application.xml. A version attribute is required, but this version of the Weblogic Server will assume that the JEE5 is used. Future versions of the Weblogic Server will reject descriptors that do not specify the JEE version.>
    <Jun 15, 2012 1:07:43 AM ICT> <Warning> <Munger> <BEA-2156203> <A version attribute was not found in element application in the deployment descriptor in C:\Oracle\Middleware\user_projects\domains\EPMSystem\servers\EPMServer0\tmp\servers\EPMServer0\tmp\_WL_user\APS_11.1.2.0\mizf54/META-INF/application.xml. A version attribute is required, but this version of the Weblogic Server will assume that the JEE5 is used. Future versions of the Weblogic Server will reject descriptors that do not specify the JEE version.>
    <Jun 15, 2012 1:07:45 AM ICT> <Warning> <Munger> <BEA-2156203> <A version attribute was not found in element web-app in the deployment descriptor in C:\Oracle\Middleware\user_projects\domains\EPMSystem\servers\EPMServer0\tmp\servers\EPMServer0\tmp\_WL_user\SHAREDSERVICES_11.1.2.0\dt7o9d\interop.war/WEB-INF/web.xml. A version attribute is required, but this version of the Weblogic Server will assume that the JEE5 is used. Future versions of the Weblogic Server will reject descriptors that do not specify the JEE version.>
    <Jun 15, 2012 1:08:10 AM ICT> <Error> <JDBC> <BEA-001112> <Test "select count(*) from HSS_COMPONENT_TYPES" set up for pool "EPMSystemRegistry" failed with exception: "java.sql.SQLSyntaxErrorException: ORA-00942: table or view does not exist
    ".>
    <Jun 15, 2012 1:08:11 AM ICT> <Error> <JDBC> <BEA-001112> <Test "select count(*) from HSS_COMPONENT_TYPES" set up for pool "EPMSystemRegistry" failed with exception: "java.sql.SQLSyntaxErrorException: ORA-00942: table or view does not exist
    ".>
    COMP ID = oracle.EPMOHPS
    Hyperion Provider Services - Release 11.1.2.2.100.2167
    Copyright (c) 1991, 2012 Oracle and / or its affiliates. All rights reserved.
    connection mode : HTTP
    essbase.properties: C:\Oracle\Middleware\EPMSystem11R1/common/EssbaseJavaAPI/11.1.2.0/bin/essbase.properties
    java System properties -DESS_ES_HOME: C:\Oracle\Middleware\EPMSystem11R1/common/EssbaseJavaAPI/11.1.2.0
    <Jun 15, 2012 1:08:12 AM ICT> <Error> <JDBC> <BEA-001112> <Test "select count(*) from HSS_COMPONENT_TYPES" set up for pool "EPMSystemRegistry" failed with exception: "java.sql.SQLSyntaxErrorException: ORA-00942: table or view does not exist
    ".>
    <Jun 15, 2012 1:08:13 AM ICT> <Error> <JDBC> <BEA-001112> <Test "select count(*) from HSS_COMPONENT_TYPES" set up for pool "EPMSystemRegistry" failed with exception: "java.sql.SQLSyntaxErrorException: ORA-00942: table or view does not exist
    ".>
    <Jun 15, 2012 1:08:13 AM ICT> <Error> <HTTP> <BEA-101216> <Servlet: "JAPI" failed to preload on startup in Web application: "/aps".
    javax.servlet.ServletException: Cannot initialize Provider Services server framework.
         at com.essbase.server.plugins.http.EssbaseEnterprise.init(Unknown Source)
         at weblogic.servlet.internal.StubSecurityHelper$ServletInitAction.run(StubSecurityHelper.java:283)
         at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
         at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
         at weblogic.servlet.internal.StubSecurityHelper.createServlet(StubSecurityHelper.java:64)
         Truncated. see log file for complete stacktrace
    >
    <Jun 15, 2012 1:08:13 AM ICT> <Error> <Deployer> <BEA-149231> <Unable to set the activation state to true for the application 'APS [Version=11.1.2.0]'.
    weblogic.application.ModuleException: [HTTP:101216]Servlet: "JAPI" failed to preload on startup in Web application: "/aps".
    javax.servlet.ServletException: Cannot initialize Provider Services server framework.
         at com.essbase.server.plugins.http.EssbaseEnterprise.init(Unknown Source)
         at weblogic.servlet.internal.StubSecurityHelper$ServletInitAction.run(StubSecurityHelper.java:283)
         at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
         at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
         at weblogic.servlet.internal.StubSecurityHelper.createServlet(StubSecurityHelper.java:64)
         at weblogic.servlet.internal.StubLifecycleHelper.createOneInstance(StubLifecycleHelper.java:58)
         at weblogic.servlet.internal.StubLifecycleHelper.<init>(StubLifecycleHelper.java:48)
         at weblogic.servlet.internal.ServletStubImpl.prepareServlet(ServletStubImpl.java:539)
         at weblogic.servlet.internal.WebAppServletContext.preloadServlet(WebAppServletContext.java:1981)
         at weblogic.servlet.internal.WebAppServletContext.loadServletsOnStartup(WebAppServletContext.java:1955)
         at weblogic.servlet.internal.WebAppServletContext.preloadResources(WebAppServletContext.java:1874)
         at weblogic.servlet.internal.WebAppServletContext.start(WebAppServletContext.java:3155)
         at weblogic.servlet.internal.WebAppModule.startContexts(WebAppModule.java:1518)
         at weblogic.servlet.internal.WebAppModule.start(WebAppModule.java:487)
         at weblogic.application.internal.flow.ModuleStateDriver$3.next(ModuleStateDriver.java:427)
         at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
         at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:119)
         at weblogic.application.internal.flow.ScopedModuleDriver.start(ScopedModuleDriver.java:201)
         at weblogic.application.internal.flow.ModuleListenerInvoker.start(ModuleListenerInvoker.java:249)
         at weblogic.application.internal.flow.ModuleStateDriver$3.next(ModuleStateDriver.java:427)
         at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
         at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:119)
         at weblogic.application.internal.flow.StartModulesFlow.activate(StartModulesFlow.java:28)
         at weblogic.application.internal.BaseDeployment$2.next(BaseDeployment.java:672)
         at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
         at weblogic.application.internal.BaseDeployment.activate(BaseDeployment.java:212)
         at weblogic.application.internal.EarDeployment.activate(EarDeployment.java:59)
         at weblogic.application.internal.DeploymentStateChecker.activate(DeploymentStateChecker.java:161)
         at weblogic.deploy.internal.targetserver.AppContainerInvoker.activate(AppContainerInvoker.java:79)
         at weblogic.deploy.internal.targetserver.BasicDeployment.activate(BasicDeployment.java:184)
         at weblogic.deploy.internal.targetserver.BasicDeployment.activateFromServerLifecycle(BasicDeployment.java:361)
         at weblogic.management.deploy.internal.DeploymentAdapter$1.doActivate(DeploymentAdapter.java:52)
         at weblogic.management.deploy.internal.DeploymentAdapter.activate(DeploymentAdapter.java:200)
         at weblogic.management.deploy.internal.AppTransition$2.transitionApp(AppTransition.java:31)
         at weblogic.management.deploy.internal.ConfiguredDeployments.transitionApps(ConfiguredDeployments.java:240)
         at weblogic.management.deploy.internal.ConfiguredDeployments.activate(ConfiguredDeployments.java:170)
         at weblogic.management.deploy.internal.ConfiguredDeployments.deploy(ConfiguredDeployments.java:124)
         at weblogic.management.deploy.internal.DeploymentServerService.resume(DeploymentServerService.java:181)
         at weblogic.management.deploy.internal.DeploymentServerService.start(DeploymentServerService.java:97)
         at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
         at weblogic.work.ExecuteThread.execute(ExecuteThread.java:256)
         at weblogic.work.ExecuteThread.run(ExecuteThread.java:221)
         at weblogic.servlet.internal.WebAppModule.startContexts(WebAppModule.java:1520)
         at weblogic.servlet.internal.WebAppModule.start(WebAppModule.java:484)
         at weblogic.application.internal.flow.ModuleStateDriver$3.next(ModuleStateDriver.java:425)
         at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
         at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:119)
         Truncated. see log file for complete stacktrace
    Caused By: javax.servlet.ServletException: Cannot initialize Provider Services server framework.
         at com.essbase.server.plugins.http.EssbaseEnterprise.init(Unknown Source)
         at weblogic.servlet.internal.StubSecurityHelper$ServletInitAction.run(StubSecurityHelper.java:283)
         at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
         at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
         at weblogic.servlet.internal.StubSecurityHelper.createServlet(StubSecurityHelper.java:64)
         Truncated. see log file for complete stacktrace
    >
    <Jun 15, 2012 1:08:13 AM ICT> <Error> <JDBC> <BEA-001112> <Test "select count(*) from HSS_COMPONENT_TYPES" set up for pool "EPMSystemRegistry" failed with exception: "java.sql.SQLSyntaxErrorException: ORA-00942: table or view does not exist
    ".>
    <Jun 15, 2012 1:08:13 AM ICT> <Error> <JDBC> <BEA-001112> <Test "select count(*) from HSS_COMPONENT_TYPES" set up for pool "EPMSystemRegistry" failed with exception: "java.sql.SQLSyntaxErrorException: ORA-00942: table or view does not exist
    ".>
    <Jun 15, 2012 1:08:13 AM ICT> <Error> <JDBC> <BEA-001112> <Test "select count(*) from HSS_COMPONENT_TYPES" set up for pool "EPMSystemRegistry" failed with exception: "java.sql.SQLSyntaxErrorException: ORA-00942: table or view does not exist
    ".>
    Essbase® Administration Services - Version 11.1.2.2.100.2176
    Copyright © 1991, 2012 Oracle and/or its affiliates. All rights reserved. Oracle and Java are registered trademarks of Oracle and/or its affiliates. Other names may be trademarks of their respective owners. No portion hereof may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying, recording, or information storage and retrieval systems, for any purpose other than the recipient's personal use, without the express written permission of Oracle.
    US Patent Number 5,359,724
    US Patent Number 6,317,750
    Current time stamp: Fri Jun 15 01:08:14 ICT 2012
    Server started successfully
    Waiting for client requests
    <Jun 15, 2012 1:08:14 AM ICT> <Error> <JDBC> <BEA-001112> <Test "select count(*) from HSS_COMPONENT_TYPES" set up for pool "EPMSystemRegistry" failed with exception: "java.sql.SQLSyntaxErrorException: ORA-00942: table or view does not exist
    ".>
    <Jun 15, 2012 1:08:14 AM ICT> <Error> <JDBC> <BEA-001112> <Test "select count(*) from HSS_COMPONENT_TYPES" set up for pool "EPMSystemRegistry" failed with exception: "java.sql.SQLSyntaxErrorException: ORA-00942: table or view does not exist
    ".>
    <Jun 15, 2012 1:08:14 AM ICT> <Error> <JDBC> <BEA-001112> <Test "select count(*) from HSS_COMPONENT_TYPES" set up for pool "EPMSystemRegistry" failed with exception: "java.sql.SQLSyntaxErrorException: ORA-00942: table or view does not exist
    ".>
    <Jun 15, 2012 1:08:14 AM ICT> <Error> <JDBC> <BEA-001112> <Test "select count(*) from HSS_COMPONENT_TYPES" set up for pool "EPMSystemRegistry" failed with exception: "java.sql.SQLSyntaxErrorException: ORA-00942: table or view does not exist
    ".>
    <Jun 15, 2012 1:08:14 AM ICT> <Error> <JDBC> <BEA-001112> <Test "select count(*) from HSS_COMPONENT_TYPES" set up for pool "EPMSystemRegistry" failed with exception: "java.sql.SQLSyntaxErrorException: ORA-00942: table or view does not exist
    ".>
    <Jun 15, 2012 1:08:15 AM ICT> <Error> <JDBC> <BEA-001112> <Test "select count(*) from HSS_COMPONENT_TYPES" set up for pool "EPMSystemRegistry" failed with exception: "java.sql.SQLSyntaxErrorException: ORA-00942: table or view does not exist
    ".>
    <Jun 15, 2012 1:08:15 AM ICT> <Error> <JDBC> <BEA-001112> <Test "select count(*) from HSS_COMPONENT_TYPES" set up for pool "EPMSystemRegistry" failed with exception: "java.sql.SQLSyntaxErrorException: ORA-00942: table or view does not exist
    ".>
    <Jun 15, 2012 1:08:16 AM ICT> <Error> <JDBC> <BEA-001112> <Test "select count(*) from HSS_COMPONENT_TYPES" set up for pool "EPMSystemRegistry" failed with exception: "java.sql.SQLSyntaxErrorException: ORA-00942: table or view does not exist
    ".>
    <Jun 15, 2012 1:08:18 AM ICT> <Error> <JDBC> <BEA-001112> <Test "select count(*) from HSS_COMPONENT_TYPES" set up for pool "EPMSystemRegistry" failed with exception: "java.sql.SQLSyntaxErrorException: ORA-00942: table or view does not exist
    ".>
    <Jun 15, 2012 1:08:18 AM ICT> <Error> <JDBC> <BEA-001112> <Test "select count(*) from HSS_COMPONENT_TYPES" set up for pool "EPMSystemRegistry" failed with exception: "java.sql.SQLSyntaxErrorException: ORA-00942: table or view does not exist
    ".>
    <Jun 15, 2012 1:08:18 AM ICT> <Error> <JDBC> <BEA-001112> <Test "select count(*) from HSS_COMPONENT_TYPES" set up for pool "EPMSystemRegistry" failed with exception: "java.sql.SQLSyntaxErrorException: ORA-00942: table or view does not exist
    ".>
    <Jun 15, 2012 1:08:18 AM ICT> <Error> <JDBC> <BEA-001112> <Test "select count(*) from HSS_COMPONENT_TYPES" set up for pool "EPMSystemRegistry" failed with exception: "java.sql.SQLSyntaxErrorException: ORA-00942: table or view does not exist
    ".>
    <Jun 15, 2012 1:08:18 AM ICT> <Error> <JDBC> <BEA-001112> <Test "select count(*) from HSS_COMPONENT_TYPES" set up for pool "EPMSystemRegistry" failed with exception: "java.sql.SQLSyntaxErrorException: ORA-00942: table or view does not exist
    ".>
    <Jun 15, 2012 1:08:18 AM ICT> <Error> <JDBC> <BEA-001112> <Test "select count(*) from HSS_COMPONENT_TYPES" set up for pool "EPMSystemRegistry" failed with exception: "java.sql.SQLSyntaxErrorException: ORA-00942: table or view does not exist
    ".>
    <Jun 15, 2012 1:08:18 AM ICT> <Error> <JDBC> <BEA-001112> <Test "select count(*) from HSS_COMPONENT_TYPES" set up for pool "EPMSystemRegistry" failed with exception: "java.sql.SQLSyntaxErrorException: ORA-00942: table or view does not exist
    ".>
    <Jun 15, 2012 1:08:18 AM ICT> <Error> <JDBC> <BEA-001112> <Test "select count(*) from HSS_COMPONENT_TYPES" set up for pool "EPMSystemRegistry" failed with exception: "java.sql.SQLSyntaxErrorException: ORA-00942: table or view does not exist
    ".>
    <Jun 15, 2012 1:08:18 AM ICT> <Error> <JDBC> <BEA-001112> <Test "select count(*) from HSS_COMPONENT_TYPES" set up for pool "EPMSystemRegistry" failed with exception: "java.sql.SQLSyntaxErrorException: ORA-00942: table or view does not exist
    ".>
    <Jun 15, 2012 1:08:18 AM ICT> <Error> <JDBC> <BEA-001112> <Test "select count(*) from HSS_COMPONENT_TYPES" set up for pool "EPMSystemRegistry" failed with exception: "java.sql.SQLSyntaxErrorException: ORA-00942: table or view does not exist
    ".>
    <Jun 15, 2012 1:08:18 AM ICT> <Error> <JDBC> <BEA-001112> <Test "select count(*) from HSS_COMPONENT_TYPES" set up for pool "EPMSystemRegistry" failed with exception: "java.sql.SQLSyntaxErrorException: ORA-00942: table or view does not exist
    ".>
    <Jun 15, 2012 1:08:19 AM ICT> <Error> <JDBC> <BEA-001112> <Test "select count(*) from HSS_COMPONENT_TYPES" set up for pool "EPMSystemRegistry" failed with exception: "java.sql.SQLSyntaxErrorException: ORA-00942: table or view does not exist
    ".>
    <Jun 15, 2012 1:08:19 AM ICT> <Error> <JDBC> <BEA-001112> <Test "select count(*) from HSS_COMPONENT_TYPES" set up for pool "EPMSystemRegistry" failed with exception: "java.sql.SQLSyntaxErrorException: ORA-00942: table or view does not exist
    ".>
    <Jun 15, 2012 1:08:19 AM ICT> <Error> <JDBC> <BEA-001112> <Test "select count(*) from HSS_COMPONENT_TYPES" set up for pool "EPMSystemRegistry" failed with exception: "java.sql.SQLSyntaxErrorException: ORA-00942: table or view does not exist
    ".>
    **********Getting connection from hub connection pool..Testing JNDI connection....
    <Jun 15, 2012 1:08:19 AM ICT> <Error> <JDBC> <BEA-001112> <Test "select count(*) from HSS_COMPONENT_TYPES" set up for pool "EPMSystemRegistry" failed with exception: "java.sql.SQLSyntaxErrorException: ORA-00942: table or view does not exist
    ".>
    <Jun 15, 2012 1:08:19 AM ICT> <Error> <JDBC> <BEA-001112> <Test "select count(*) from HSS_COMPONENT_TYPES" set up for pool "EPMSystemRegistry" failed with exception: "java.sql.SQLSyntaxErrorException: ORA-00942: table or view does not exist
    ".>
    <Jun 15, 2012 1:08:19 AM ICT> <Error> <JDBC> <BEA-001112> <Test "select count(*) from HSS_COMPONENT_TYPES" set up for pool "EPMSystemRegistry" failed with exception: "java.sql.SQLSyntaxErrorException: ORA-00942: table or view does not exist
    ".>
    <Jun 15, 2012 1:08:19 AM ICT> <Error> <JDBC> <BEA-001112> <Test "select count(*) from HSS_COMPONENT_TYPES" set up for pool "EPMSystemRegistry" failed with exception: "java.sql.SQLSyntaxErrorException: ORA-00942: table or view does not exist
    ".>
    <Jun 15, 2012 1:08:19 AM ICT> <Error> <JDBC> <BEA-001112> <Test "select count(*) from HSS_COMPONENT_TYPES" set up for pool "EPMSystemRegistry" failed with exception: "java.sql.SQLSyntaxErrorException: ORA-00942: table or view does not exist
    ".>
    <Jun 15, 2012 1:08:19 AM ICT> <Error> <JDBC> <BEA-001112> <Test "select count(*) from HSS_COMPONENT_TYPES" set up for pool "EPMSystemRegistry" failed with exception: "java.sql.SQLSyntaxErrorException: ORA-00942: table or view does not exist
    ".>
    <Jun 15, 2012 1:08:19 AM ICT> <Error> <JDBC> <BEA-001112> <Test "select count(*) from HSS_COMPONENT_TYPES" set up for pool "EPMSystemRegistry" failed with exception: "java.sql.SQLSyntaxErrorException: ORA-00942: table or view does not exist
    ".>
    <Jun 15, 2012 1:08:19 AM ICT> <Error> <JDBC> <BEA-001112> <Test "select count(*) from HSS_COMPONENT_TYPES" set up for pool "EPMSystemRegistry" failed with exception: "java.sql.SQLSyntaxErrorException: ORA-00942: table or view does not exist
    ".>
    <Jun 15, 2012 1:08:19 AM ICT> <Error> <JDBC> <BEA-001112> <Test "select count(*) from HSS_COMPONENT_TYPES" set up for pool "EPMSystemRegistry" failed with exception: "java.sql.SQLSyntaxErrorException: ORA-00942: table or view does not exist
    ".>
    <Jun 15, 2012 1:08:19 AM ICT> <Error> <JDBC> <BEA-001112> <Test "select count(*) from HSS_COMPONENT_TYPES" set up for pool "EPMSystemRegistry" failed with exception: "java.sql.SQLSyntaxErrorException: ORA-00942: table or view does not exist
    ".>
    <Jun 15, 2012 1:08:19 AM ICT> <Error> <HTTP> <BEA-101216> <Servlet: "WorkflowEngine" failed to preload on startup in Web application: "interop".
    javax.servlet.ServletException: DSF initalization error null
         at com.hyperion.cesdsf.server.framework.DsfServer.init(DsfServer.java:64)
         at weblogic.servlet.internal.StubSecurityHelper$ServletInitAction.run(StubSecurityHelper.java:283)
         at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
         at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
         at weblogic.servlet.internal.StubSecurityHelper.createServlet(StubSecurityHelper.java:64)
         Truncated. see log file for complete stacktrace
    >
    <Jun 15, 2012 1:08:19 AM ICT> <Error> <Deployer> <BEA-149231> <Unable to set the activation state to true for the application 'SHAREDSERVICES [Version=11.1.2.0]'.
    weblogic.application.ModuleException: [HTTP:101216]Servlet: "WorkflowEngine" failed to preload on startup in Web application: "interop".
    javax.servlet.ServletException: DSF initalization error null
         at com.hyperion.cesdsf.server.framework.DsfServer.init(DsfServer.java:64)
         at weblogic.servlet.internal.StubSecurityHelper$ServletInitAction.run(StubSecurityHelper.java:283)
         at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
         at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
         at weblogic.servlet.internal.StubSecurityHelper.createServlet(StubSecurityHelper.java:64)
         at weblogic.servlet.internal.StubLifecycleHelper.createOneInstance(StubLifecycleHelper.java:58)
         at weblogic.servlet.internal.StubLifecycleHelper.<init>(StubLifecycleHelper.java:48)
         at weblogic.servlet.internal.ServletStubImpl.prepareServlet(ServletStubImpl.java:539)
         at weblogic.servlet.internal.WebAppServletContext.preloadServlet(WebAppServletContext.java:1981)
         at weblogic.servlet.internal.WebAppServletContext.loadServletsOnStartup(WebAppServletContext.java:1955)
         at weblogic.servlet.internal.WebAppServletContext.preloadResources(WebAppServletContext.java:1874)
         at weblogic.servlet.internal.WebAppServletContext.start(WebAppServletContext.java:3155)
         at weblogic.servlet.internal.WebAppModule.startContexts(WebAppModule.java:1518)
         at weblogic.servlet.internal.WebAppModule.start(WebAppModule.java:487)
         at weblogic.application.internal.flow.ModuleStateDriver$3.next(ModuleStateDriver.java:427)
         at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
         at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:119)
         at weblogic.application.internal.flow.ScopedModuleDriver.start(ScopedModuleDriver.java:201)
         at weblogic.application.internal.flow.ModuleListenerInvoker.start(ModuleListenerInvoker.java:249)
         at weblogic.application.internal.flow.ModuleStateDriver$3.next(ModuleStateDriver.java:427)
         at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
         at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:119)
         at weblogic.application.internal.flow.StartModulesFlow.activate(StartModulesFlow.java:28)
         at weblogic.application.internal.BaseDeployment$2.next(BaseDeployment.java:672)
         at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
         at weblogic.application.internal.BaseDeployment.activate(BaseDeployment.java:212)
         at weblogic.application.internal.EarDeployment.activate(EarDeployment.java:59)
         at weblogic.application.internal.DeploymentStateChecker.activate(DeploymentStateChecker.java:161)
         at weblogic.deploy.internal.targetserver.AppContainerInvoker.activate(AppContainerInvoker.java:79)
         at weblogic.deploy.internal.targetserver.BasicDeployment.activate(BasicDeployment.java:184)
         at weblogic.deploy.internal.targetserver.BasicDeployment.activateFromServerLifecycle(BasicDeployment.java:361)
         at weblogic.management.deploy.internal.DeploymentAdapter$1.doActivate(DeploymentAdapter.java:52)
         at weblogic.management.deploy.internal.DeploymentAdapter.activate(DeploymentAdapter.java:200)
         at weblogic.management.deploy.internal.AppTransition$2.transitionApp(AppTransition.java:31)
         at weblogic.management.deploy.internal.ConfiguredDeployments.transitionApps(ConfiguredDeployments.java:261)
         at weblogic.management.deploy.internal.ConfiguredDeployments.transitionApps(ConfiguredDeployments.java:220)
         at weblogic.management.deploy.internal.ConfiguredDeployments.activate(ConfiguredDeployments.java:170)
         at weblogic.management.deploy.internal.ConfiguredDeployments.deploy(ConfiguredDeployments.java:124)
         at weblogic.management.deploy.internal.DeploymentServerService.resume(DeploymentServerService.java:181)
         at weblogic.management.deploy.internal.DeploymentServerService.start(DeploymentServerService.java:97)
         at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
         at weblogic.work.ExecuteThread.execute(ExecuteThread.java:256)
         at weblogic.work.ExecuteThread.run(ExecuteThread.java:221)
         at weblogic.servlet.internal.WebAppModule.startContexts(WebAppModule.java:1520)
         at weblogic.servlet.internal.WebAppModule.start(WebAppModule.java:484)
         at weblogic.application.internal.flow.ModuleStateDriver$3.next(ModuleStateDriver.java:425)
         at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
         at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:119)
         Truncated. see log file for complete stacktrace
    Caused By: javax.servlet.ServletException: DSF initalization error null
         at com.hyperion.cesdsf.server.framework.DsfServer.init(DsfServer.java:64)
         at weblogic.servlet.internal.StubSecurityHelper$ServletInitAction.run(StubSecurityHelper.java:283)
         at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
         at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
         at weblogic.servlet.internal.StubSecurityHelper.createServlet(StubSecurityHelper.java:64)
         Truncated. see log file for complete stacktrace
    >
    <Jun 15, 2012 1:08:20 AM ICT> <Error> <JDBC> <BEA-001112> <Test "select count(*) from HSS_COMPONENT_TYPES" set up for pool "EPMSystemRegistry" failed with exception: "java.sql.SQLSyntaxErrorException: ORA-00942: table or view does not exist
    ".>
    <Jun 15, 2012 1:08:20 AM ICT> <Error> <JDBC> <BEA-001112> <Test "select count(*) from HSS_COMPONENT_TYPES" set up for pool "EPMSystemRegistry" failed with exception: "java.sql.SQLSyntaxErrorException: ORA-00942: table or view does not exist
    ".>
    <Jun 15, 2012 1:08:20 AM ICT> <Error> <JDBC> <BEA-001112> <Test "select count(*) from HSS_COMPONENT_TYPES" set up for pool "EPMSystemRegistry" failed with exception: "java.sql.SQLSyntaxErrorException: ORA-00942: table or view does not exist
    ".>
    <Jun 15, 2012 1:08:20 AM ICT> <Error> <HTTP> <BEA-101216> <Servlet: "prefs" failed to preload on startup in Web application: "workspace".
    EPMCSS-00001: Failed to initialize EPM Shared Services security instance. Component SYSTEM9/FOUNDATION_SERVICES_PRODUCT/SHARED_SERVICES_PRODUCT is null in EPM System Registry. Verify EPM System Registry configuration.
         at com.hyperion.css.registry.RegistryManager.initRegistry(RegistryManager.java:111)
         at com.hyperion.css.registry.RegistryManager.<init>(RegistryManager.java:95)
         at com.hyperion.css.registry.RegistryManager.getInstance(RegistryManager.java:134)
         at com.hyperion.css.CSSSystemFactory.getCSSMode(CSSSystemFactory.java:103)
         at com.hyperion.css.CSSSystemFactory.getCSSSystem(CSSSystemFactory.java:71)
         Truncated. see log file for complete stacktrace
    >
    <Jun 15, 2012 1:08:20 AM ICT> <Error> <Deployer> <BEA-149231> <Unable to set the activation state to true for the application 'WORKSPACE [Version=11.1.2.0]'.
    weblogic.application.ModuleException: [HTTP:101216]Servlet: "prefs" failed to preload on startup in Web application: "workspace".
    EPMCSS-00001: Failed to initialize EPM Shared Services security instance. Component SYSTEM9/FOUNDATION_SERVICES_PRODUCT/SHARED_SERVICES_PRODUCT is null in EPM System Registry. Verify EPM System Registry configuration.
         at com.hyperion.css.registry.RegistryManager.initRegistry(RegistryManager.java:111)
         at com.hyperion.css.registry.RegistryManager.<init>(RegistryManager.java:95)
         at com.hyperion.css.registry.RegistryManager.getInstance(RegistryManager.java:134)
         at com.hyperion.css.CSSSystemFactory.getCSSMode(CSSSystemFactory.java:103)
         at com.hyperion.css.CSSSystemFactory.getCSSSystem(CSSSystemFactory.java:71)
         at com.hyperion.css.CSSSystem.initCSSSystem(CSSSystem.java:318)
         at com.hyperion.css.CSSSystem.getInstance(CSSSystem.java:272)
         at com.oracle.workspace.Repository$PrefsStore.initialize(Repository.java:2917)
         at com.hyperion.bpm.prefs.PrefsServlet.init

  • Lircd: command not found after install of lirc

    Hi!
    I've had some problems with lirc and had to uninstall it from my system. I also deleted
    the files named lirc* after I uninstalled. I then cleaned the pacman cache and reinstalled
    lirc.
    I did this in a hope of getting a complete reinstall of lirc. The installation went fine, but my
    system doesn't seem to see that lirc has been reinstalled. When I do #lircd (which used to
    start lircd) I get #bash: lircd: command not found
    I've tried to reinstall several more times by #pacman -S lirc and it runs through the installation.
    I still get #bash: lircd: command not found though.
    What am I doing wrong? Why won't lirc go back to working like it should do after reinstallation??

    azleifel wrote:
    The lircd daemon expects to be run at startup and needs root permissions because it will create device nodes in /dev.  Try "man lircd" for more information.
    To run lircd at startup, add it to the DAEMONS line in /etc/rc.conf.  If needed, add any necessary kernel module to the MODULES line of /etc/rc.conf while you're there.  As an example, I have MODULES=(lirc-mceusb2) for my trusty Microsoft MCE remote control and DAEMONS=(@lircd).
    That did it!! Thanks.
    I spent hours and hours yesterday trying to figure out how to autostart lircd. Now everything works.
    When I try #irw every button I push is mapped with the right name and function. But in Freevo things are not that smooth. It seems
    freevo only understands a few of the buttons.
    I've seen that in myth there's a config file (or something) that seems to map out the remote functions in relation to myth itself. Do I
    need a similar config file for freevo?
    EDIT: nwm... I found out that yes, I do.
    Last edited by Perre (2008-04-13 10:59:09)

  • Entry point not found after installing last update (itunes 11.1.4.62)

    itunes just prompted me to install an update, so I did.  Now I can not open iTunes at all.  I recive the following message:
    iTunes.exe - Entry Point Not Found
    The procedure entry point
    ?videoTracks@QTMovie@@QBE?AV?$Vector@VQTT
    rack@@@***@@$0A@VCrashOnOverflow@2@@***@@XZ
    could not be located in the dynamic link library :\Program Files
    (x86)\Common Files\Apple\Apple Application
    Support\WebKit.dll
    I have already tried to restart, and repair both iTunes and Apple Application Support.
    I had no problems prior to installing the latest update.  What can I do?

    iTunes.exe - Entry Point Not Found
    The procedure entry point
    ?videoTracks@QTMovie@@QBE?AV?$Vector@VQTT
    rack@@@***@@$0A@VCrashOnOverflow@2@@***@@XZ
    could not be located in the dynamic link library :\Program Files
    (x86)\Common Files\Apple\Apple Application
    Support\WebKit.dll
    Try the following user tip:
    iTunes for Windows 11.1.4.62: "The procedure entry point: ?videoTracks@QTMovie@ [...] could not be located ..." error messages when launching iTunes

  • Entry point not found after installing odp

    When installing odp on a Win200 machine with 8.1.7 client leads to installation failure when odp installer tries to access net8-assistent. Afterwards oracle tools (like tnsping) don't start and come up with an 'Entry point nog found' message, something with 'JREW.EXE'. It could not be located in the dynamic link library msvcrt.dll.
    Has anyone experienced the same problems ?
    Thanx in advance!

    iTunes.exe - Entry Point Not Found
    The procedure entry point
    ?videoTracks@QTMovie@@QBE?AV?$Vector@VQTT
    rack@@@***@@$0A@VCrashOnOverflow@2@@***@@XZ
    could not be located in the dynamic link library :\Program Files
    (x86)\Common Files\Apple\Apple Application
    Support\WebKit.dll
    Try the following user tip:
    iTunes for Windows 11.1.4.62: "The procedure entry point: ?videoTracks@QTMovie@ [...] could not be located ..." error messages when launching iTunes

  • SD card reader not functioning after update to Mavericks

    SD card reader no longer functioning after update to Mavericks

    Had the same problem.
    In Terminal, enter the command
    Killall Finder
    Worked for me - - SD card showed up when I next inserted it.

  • Page not found - after installing htmldb_2.0.zip

    On my W2000 PC installed XE ok and everything seemed fine on...
    http://127.0.0.1:8080/apex
    Then installed htmldb_2.0.zip and now nothing works...
    http://127.0.0.1:8080/apex
    The requested URL /apex/f was not found on this server
    http://127.0.0.1:8080/pls/htmldb
    The requested URL /pls/htmldb was not found on this server
    Any ideas?
    Thanks

    Hi
    Why do you install htmldb 2.0?
    It's already included (apex ist htmldb2.0)
    APEX use the integrated webserver from xdb.
    If you install htmldb you must install a external apache or configure a dad ("pls") in xdb.
    Greetings
    Sven

Maybe you are looking for