6 plus bluetooth reconnection problem

My 6 plus was able to pairing with Ooma-Telo (IP phone) no problem.  But, if I leave home and come back, it will not automatically reconnected.  Anybody know what is the problem?

That's because you can't connect to other apple devices unless your tethering.  iOS: Understanding Personal Hotspot - Apple Support
iOS: Supported Bluetooth profiles - Apple Support
Connect your iPhone, iPad, iPod touch, and Mac using Continuity - Apple Support

Similar Messages

  • Apple Bluetooth Mouse Problems ?

    Hi my bluetooth mouse is really playing up, for example when i move the mouse the tracking is really off... i have to keep disconnecting then reconnecting to make it work propley.....
    i just repaired the bluetooth connection 6 times to make the mouse work properly.... Has any one had this problem, if so what is the fix ? Also my wifi card has failed i do know the bluetooth card is on top of the wifi card maybe thats casuing the problems?
    Also i have purchased a liace usb 3.0 portable harddrive i did read some where that usb3.0 does interfere with bluetooth connections on macbooks i could be wrong ? Thanks

    Hi, Colin!
    The most closely related Apple KnowledgeBase articles to what you've described that come to mind are:
        • Apple Wireless Mouse: How to Install or Replace Batteries
        • Apple Wireless Keyboard and Apple Wireless Mouse: How to Check the Battery Level
        • Apple Wireless Keyboard and Mouse: Troubleshooting Connection Issues
        • Bluetooth: How to Set Up Your Apple Wireless Mouse. [1]
    These articles are a good place to start with troubleshooting this problem.
    When you're having trouble with your iMac G5, searching the KnowledgeBase can often be a big help. Notice that several categories of resources are available. If you have any difficulty at first adjusting to the search engine (I did), check out the ~new Search Help webpage.
    I'll post back a little later with some further comments about what I've observed of my (& other folks') difficulties and solutions with changing batteries and reconnecting, etc.
    Please post back to share your progress and to discuss this further.
    Hang in there!
    Warm regards,
    Dean
    [1] Please note that having a backup "wired" mouse may be required to resolve Bluetooth connection problems. As the "How to Set Up..." article cited above says:"Use a Wired USB Keyboard and Mouse During Setup
    
During the setup process, you'll need to use a USB mouse before the Apple Wireless Mouse can work. Keep a USB mouse connected to the computer until you've completed setting up the Apple Wireless Mouse. After setup is complete, you can disconnect the USB mouse."
    In my experience, a "wired" keyboard is only required when there's a connection problem for which using a startup keyboard shortcut is a critical troubleshooting tool.   (Some of the startup key combinations for Intel-based Macs are different.)
    [1,995 ⊥ 3,365]

  • IOS 4.3 Bluetooth Headset Problem

    Does anyone have this similar problem?
    My bluetooth headset (handsfree) disconnects intermittently every few minutes (and auto reconnects in 10 to 20 secs). The "Personal Hotspot" option was disabled as I thought it was interferring with the bluetooh connection.
    But after some trial and error, I disabled the Wi-Fi option, and it solved the bluetooth disconnection problem.
    Prior to IOS 4.2, I have never encountered this problem. Does anyone know how I can downgrade back to IOS4.2?

    After upgrading to iOS 4.3, within a few days later my Jabra WAVE encountered problems with its Bluetooth connectivity. I had no problems pairing with both my iPhone4 and my MacBook (aluminium uni-body model). Unfortunately, I can't control my Jabra WAVE's volume control any more which was clearly shown on my iPhone4. Worse of all, I can hear the caller's voice but not vice versa.
    I thought my Jabra WAVE was faulty, and I tested it on Skype via my MacBook. To my surprise it worked flawlessly. I've a hunch that iOS 4.3 is still very buggy, and Apple iOS engineers haven't rectified lots of these bugs since the last version.
    This is a terrible pain for everyone who's upgraded to iOS 4.3. Bummer

  • Convoy 2 bluetooth connection problems

    We have 48 Convoy 2 phones. Three of these need to use bluetooth. All three of the Convoy 2 phones that need to use bluetooth have problems staying connected to their paired devices. Two of the phones need to connect to Jawbone headsets. We have carefully followed instructions and factory reset the the Jawbones then paired them with the Covoy 2. The connections drop off/on dozens of times per day. The connection distance is only two feet. The third phone has a bluetooth connection to a Jeep Command Center for hands free phone use while driving. It has a connection distance of less than two feet. It drops the connection but does not auto reconnect. One must turn the Convoy 2 off/on to reconnect.
    Has anyone else experienced bluetooth problems with the Convoy 2? Any suggestion regarding the Jawbones? These are expensive two year old headsets with bluetooth v2.0. The Convoy 2 has bluetooth v2.1, which is supposed to be backward compatible with earlier bluetooth versions.

    Does anyone from Verizon read these posts?
    Turns out there is a Verizon Bluetooth website: here. The model of Jawbone with which we are having difficulty is not on the list of devices for the Convoy 2. Does this mean it is not compatible? We purchased the Jawbones (JBT03 and JBT04) in August 2009. The specs of these models say they are compatible with bluetooth v2.1 phones, That's the same version of bluetooth used by the Convoy 2. These Jawbones worked fine with the Verizon phones replaced by the Convoy 2. By the way, we tried pairing the Convoy 2 with a recent Motorola headset. Like the Jawbones, the communication between the Motorola headset and the Convoy 2 phone spontaneously switched off/on dozens of times per day.

  • MSI GE60 0ND and Intel Dualband Wireless-AC 7260 plus Bluetooth

    I recently bought a Intel Dualband Wireless-AC 7260 plus Bluetooth Adapter (Model Number: 7260HMW) for my MSI GE60 0ND to replace the Intel Centrino Wireless-N 135.
    Wifi works without any problem, but bluetooth does not, even with the newest Intel drivers v3.​1.​1309.
    The bluetooth device isnt even listed in the device manager - there are also no unknown devices.
    I´m using Windows 8 - also tried Windows 8.1 and a Fedora 20 Live-CD with the same result.
    There is no bluetooth device listed.
    Could it be possible that bluetooth function of the Intel 7260HMW is somehow disabled in the bios?

    I tried the Intel Dualband Wireless-AC 7260 plus Bluetooth Adapter in a Desktop Asus Maximus V Gene using a mPcie Combo-Adapter. Wifi and Bluetooth worked without any issue.
    The Intel 7260 is definitly working.
    Another issue regarding my MSI GE60:
    I switched back to my Intel Centrino Wireless-N 135 and still have no bluetooth functionality. I thought it would be a driver issue, but there are still no bluetooth devices listed in the device manager Windows 8.1). Under Linux Fedora 20 are also no bluetooth devices present.
    It seems like bluetooth is somehow hardware disabled. In bios are no bluetooth options visible
    Edit: Using Fedora and FN-Key + F9 enabled bluetoth for the Intel Centrino Wireless-N 135 again. Maybe when the SCM / FN-Key Application will work under Windows 8.1, enabling/disabling bluetooth using Windows 8.1 will be possible too

  • Intel iMac; upgraded adobe flash; bluetooth keyboard no longer pairs but magic mouse still OK. With Bluetooth switched on the screen splits into 4 areas and open windows seperate and shrink. Switch off Bluetooth and problem disappears and iMac works OK

    Intel iMac; upgraded adobe flash; bluetooth keyboard no longer pairs but magic mouse still OK. With Bluetooth switched on the screen splits into 4 areas and open windows seperate and shrink. Switch off Bluetooth and problem disappears and iMac works OK with plug-in keyboard and mouse

    Hi, Derek -
    ...the screen splits into 4 areas and open windows seperate and shrink.
    Sounds like Spaces is being activated somehow. With the wired keyboard and mouse in use, select the Exposé & Spaces control pane in System Preferences, click the choice in that pane for Spaces. See what the settings are. There are some activation settings in that pane - by default, F8 activates it.
    It could be that the bluetooth keyboard has some stuck keys and is activating Spaces; or that the activation command has somehow been reset to something that the bluetooth mouse, or bluetooth itself, is triggering.

  • HP Officejet Pro 8600 Plus "unspecified printer problem"

    I just set up my HP Officejet Pro 8600 Plus e-All-in-One.  The set-up seemed to go okay, but when I go to the "devices" tab for "HP Connected" it has a yellow yield sign and says that I have a problem with my printer.  When I click on the yield sign symbol, the box says that "An unspecified problem was reported. Please check your printer."   When I check the printer pannel, there are no problems reported.  The machine seems to print okay, but I'd like to clear up this error that is shown.  Any ideas?
    Also, I've already done the restart and sign-off/sign-in stuff, so we can move on to second-order trouble shooting.  Thanks.
    This question was solved.
    View Solution.

    HELP!
    I am having exactly the same problem. I am simply swapping out an existing Deskjet 3512 that worked perfectly at all levels, so i KNOW i dont have router/port/network issues. eprint was and is flawless. I just plugged it back in to check and it still works just fine with eprint.
    Using my new Pro8600, I send emails to my eprint address and they seem to go...and then nothing. they just don't print.
    I get the"Officejet Pro 8600 Plus "unspecified printer problem"" message but my front panel reports no issues.
    I'm a step away from taking this back and buying an Epson.
    My experience with their support has bee stellar at a commercial printer level.
    This seems to be a very common problem and I just dont have hours to monkey around with something that should work out of the box.
    any help will be appreciated.

  • Mac Mini Bluetooth hardware problems ?

    I own a Mac Mini Intel Core 2 Duo 1Gb bought last October, an Apple wireless keyboard and an Apple wireless mouse, both I formerly use without any problems with my old Powerbook G4. By now, I used them with my Mac Mini it worked perfectly fine. But since two or three weeks, I’ve got big Bluetooth connection problem. Randomly, after one or two hours of use, both keyboard and mouse loose connection and the Bluetooth symbol change itself into a strange one. I had a look on your site to learn the meaning of it and the symbol is see which is a Bluetooth symbol with a horizontal zebra means that no Bluetooth hardware can be found! Does my Mac Mini built-in Bluetooth card have problems?
    Since I haven’t got any wired USB keyboard or mouse I have to reboot my Mac Mini quite roughly. Sometimes one reboot is enough to make the Bluetooth of Mac Mini to work again, sometimes not and I have to wait a little bit more (more than ten minutes). I can see it works again as the Bluetooth symbol is the right one again (the one with the dots).
    It is very annoying. And I am a bit sad to have such problems with Apple stuff. Is there something I could do to avoid such a waste of time? Or shall I call Apple Care for fear it should be a hardware problem.
    Of course, I use brand new batteries for both of them.
    Message was edited by: Christophe Canus

    ***
    My mini is doing it as well. Just started doing 2-3 weeks ago. Logitech Denovo or Apple Bluetooth. Doesn't matter which. Loses it in about an hour or so. Al Keyboards and mice were purchased at about the same time as the core 2 duo mini, ~ last October.
    Must power cycle the machine to get it back and it must be paired again. Very annoying. Can't remember if it coincides with an Apple update.
    This mini has had the superdrive replaced twice, once within 6 weeks of purchase. Ever since Leopard, it's been close to the best media head. now this...
    Sigh.
    (What makes it not the best? Frontrow doesn't sort titles correctly [1, 10, 2, 3 - wrong!], doesn't force mount aliases in the movies directory, doesn't put out 1080p without hacking. And I'd so love eyeTV integration with Frontrow. It'd be perfect then.)

  • Any Bluetooth audio problems since upgrading to ICS?

    Hi.
    Was wondering if anyone has had any Bluetooth audio problems since upgrading to ICS?  In particular, have you had any stuttering and/or pauses in streaming since the upgrade?
    I use a MW600 with my phone and I get stuttering and pauses every few minutes between the phone and the MW600 which is very annoying - to the point where I can't reliably use the phone for audio any more.
    Thanks
    Savcom

    Sorry but it seems to be a problem some users are experiencing. It's already been reported so hopefully there will be a fix for this soon.
     - Community Manager Sony Xperia Support Forum
    If you're new to our forums make sure that you have read our Discussion guidelines.
    If you want to get in touch with the local support team for your country please visit our contact page.

  • Having bluetooth connection problem after using Yosemite for a week

    After installing and using Yosemite for a week, I experienced bluetooth connection problems with my magic mouse and headphone, my model is macbook pro retina early 2013, hope to fix this soon

    Hello there Oranger84,
    If I understand correctly you are having some sort of Bluetooth issue between your computer and Magic Mouse and Headphones after installing Yosemite. Depending on the particular symptoms you are seeing, I would recommend the following article to help you get that resolved:
    Troubleshooting wireless mouse and keyboard issues
    Thank you for using Apple Support Communities.
    All the best,
    Sterling

  • 9780 and Playbook bluetooth connection problem

    I have never experienced bluetooth connecting problems between my 9780 and Playbook 64 previously ... but for last few days I cannot connect them. I have deleted both devices and re-paired successfully. I have turned both fully off (removed 9780 battery) and still no connection.
    I have tested both devices by successfully connecting each of them to other bluetooth devices. They just will not connect to each other for some reason.
    The only change was the recent Playbook Software update.
    I use the Bridge and Tethering all the time and so need Bluetooth to be working ... thanks for any assistance.
    Solved!
    Go to Solution.

    maybe you can uninstall then reinstall the Bridge app on your 9780.
    The search box on top-right of this page is your true friend, and the public Knowledge Base too:

  • Experiencing problems with connecting my iPhone 6plus to my Hyundai sonata phone kit via Bluetooth, Experiencing problems with connecting my iPhone 6plus to my Hyundai sonata phone kit via Bluetooth

    Experiencing problems with connecting my iPhone 6plus to my Hyundai sonata phone kit via Bluetooth, Experiencing problems with connecting my iPhone 6plus to my Hyundai sonata phone kit via Bluetooth

    Hello NiiTeye,
    I'm sorry to hear you are having these issues with your iPhone. If you are having issues connecting to your car stereo via Bluetooth, you may find the troubleshooting steps outlined in the following articles helpful:
    Get help using your iPhone, iPad, or iPod touch with your car stereo - Apple Support
    iOS: Troubleshooting Bluetooth connections - Apple Support
    Sincerely,
    - Brenden

  • TS1398 iphone 3gs wifi grayed out and wont turn on plus Bluetooth in continuous search mode

    iphone 3gs wifi is grayed out and will not turn on, plus bluetooth is in contiuous search mode, please help, I have tried everything thats suggested online, nothing works.

    iOS: Wi-Fi or Bluetooth settings grayed out or dim - Support - Apple

  • Reconnectivity problem (2G/3G/Edge) on the new iPad.

    When do we get the up-date to solve the reconnectivity problem (2G/3G/Edge) on the new iPad? When will Apple admit to the proble?

    Never.They only want our money.

  • Major Reconnection Problems

    Hey all,
    An editor just emailed me the project file of a rough cut for a feature we're both working on, and I've been having pretty major reconnection problems. Despite the fact that we're working with exactly the same files on two identical drives, when I try to reconnect all the media I get the message:
    +"The file does not have proper content to reconnect to "(clip name)" at time (timecode) in sequence "(sequence name".+
    +Click "OK" to make this item independent and go to the next clip or "Cancel" to skip all clips from this file."+
    When I click "OK" (which I have to do 200 times, as this problem reoccurs over and over with many different clips at many different points in time), it eventually reconnects.
    However, though it appears that the clips have all successfully reconnected, the sync for the entire project is almost completely off. Sometimes it reconnects to the wrong part of the correct audio clip, sometimes it substitutes the incorrect clip altogether.
    Does anyone have any idea how to solve this problem? It's been driving me crazy for weeks.

    Stumbled upon these problems today. Final Cut Pro did not way want to reconnect the media to the capture scratch files. Only thing I did was I moved them to another drive.
    What solved the problem: rename all scratch files by adding the extension '.mov'. Confirm they are now decent quicktime movies.
    You might want to learn the single unix terminal command to do this for the entire batch at once.

Maybe you are looking for