600 X dvd
I have a thinkpad 600 X running ubuntu and when I try to play a dvd it only sees a cd rom. the dvd info is as follows: SD-c2302 Dec 1999, SN 9Z5W104 213.
Does any one know how to set the dvd up so I can watch movies on this machine? I can accsess any cd rom I put in so I know the drive is working.
Any and all help appreciated thanks in advance.
davidtheanimator wrote:
What is my simplest way to do this?
This isn't all just cut and dried and the folks who know how to do this, that know how to design a workflow for this have spent a lot of time and money on educating themselves. Perhaps you should hire someone who knows what they're doing?
Similar Messages
-
hi, do you have the software installed? http://www.debuntu.org/how-to-play-dvd-under-ubuntu-linux I was able to play dvds gtreat on my a22m with fedora. just because the drive plays cds does not mean it is working. I have had MANY dvd drives that would only play cds, so you might want to look into that. try putting a DVD other than a movie, (windows vista install, a new linux install) and see if you can browse through it.
IBM Thinkpad a22m, 850mhz (697mhz) 512mb of ram, 120gb HDD, dual boot windows xp pro, and windows 7 RC (7100)
IBM Thinkpad a21m 700mhz (547mhz) 384mb 40gb, Windows XPThank's both for the reply.
Well, i do have another 3 PC's working, so there is not a big problem on using the DVDDecrypter (which extracts the marker list).
Sometimes, i get a DVD-R from customer rather than DVCAM and the dvd-r has been already authored in another country.
My goal is to demux the accets, create my menus, import all assets including import the chapter marker list, and create the subtitles.
My workflow using the DVDMaestro is great, but i allways wanted to use DVDSP + Motion + LiveType for my workflow.
Again, i can't beleive that there is not any utility on the mac, that reads the chapters of an already authored dvd, and create a txt list of it.
For example: Last week i received a DVD i made in 2003, that i had no backup of the assets and i had to re-author it and include another subtitle and re-create the subtitles menu.
My main movie had 52 chapter markers, and it would be very tedious job to put them by hand (putting them in the i-frames).
Fortunately i used the mentioned utilities in my first post and had everything i wanted.
Are you people using both OS's for Dvd Authoring ?
Regards -
What is the best way to set up iTunes to deal with a massive media library?
I have a really big media library...probably 7k-10k digital photos, close to 1,000 ripped CDs, and over 600 ripped DVDs, all stored on 1.5TB external hard disks in a 4-drive enclosure.
Due to a recent technical glitch, I find myself installing a new drive and moving the current library. My question is, what is the best way to set up iTunes' settings to deal with a media library that is both external to the Mac on which it runs, and spans multiple physical hard disk units?
I generally like the idea of iTunes organizing my library for me (i.e. keeping everything in Media Type>Artist>Album folders via the "Automatically Add to iTunes" folder), but I'm not sure how that's going to work spanning multiple drives.
I just figure since I'm basically starting over with my iTunes installation, maybe there's a better way to do it.
Thanks in advance for any advice you can offer.You can set them up as a software RAID using Disk Utility.
It'll simply be one large disk for all intents and purposes. -
HOW TO ACTIVATE PHOTOSHOP CS6 MAC (CD EDITION) ?
so I've bought a Mac Version of Adobe Photoshop cs6 but can't active it
I've installed it and it then at 100% spits the disc out and no photoshop appears so I've reloaded it but it just goes back to the installing screen
how do i activate a cd version through liveHi Station, and Merry Christmas. I somehow don't expect him to know the fine points (CD 600 MB/DVD 4.7GB typical), but to get the optical media out of the equation, I just got him over to the downloadable installer.
If his serial is valid, it's a go and he is in business.
If not and the serial number fails, he gets his money back (maybe) and learns about counterfeits. -
Hi all,
I went along with the installation of French language on ECC6 netweaver 04s. The system was installed as ECC6 SR2. The DVD that I used belonged to "Language NetWeaver 2004s SR2 FR". We see the tcode descriptions and user menu in English and missing in French.
Is this because we require a "Language ECC 600 / SR2" DVD instead of the "netweaver 04s SR2" dvd during language import?
I have been able to locate "Language ECC 600 / SR3" DVD on marketplace. Could I proceed with ECC language import immediately after "Language NetWeaver 2004s SR2 FR".
Please share your thoughts!
Thank You,
AntarpreetHi All,
Just to add, We have the non-unicode installation!
Thank You,
Antarpreet -
New GTX 770 in existing system won't boot
So I thought I upgrade my PC with a brand new MSI GTX770. The system just won't start. Screen shows B2 in lower right hand corner and a solid cursor upper right. After a while the cursor starts blinking and B2 dissapears. Still a black screen. No possibility to enter bios, no bleeping, all fans are spinning.
When I put back in my good old MSI GTX580 all is fine again.
I am an advanced (MSI) user but never ever experienced this before. Highly frustrating and surely no plug and play experience. What to do? Underneath you'll find my systems components:
OS: Microsoft Windows7 64bit Home Premium Gold (SP1)
SSD (boot): Samsung SSD 840 EVO 250GB
Memory: Corsair Vengeance BLUE,1600-8GB KIT
PSU: Cooler Master Silent Pro M2 720WATT
Mobo: MSI Z77A-GD65, s1155, 4x DDR3, 4x SATA-300, 4x SATA-600
BIOS Version Mobo V10.1/21020208
VGA (new): MSI Geforce GTX 770 2Gb
VGA (old): MSI Geforce GTX 580 1,5Gb
CPU: Intel Core i5 3570K, 1155, 3,4GHz, Box
CPU Cooler: Scythe Mugen 2 Rev. B
HDD: Seagate Barracuda 2TB - 3.5inch
SSD: Crucial m4 , 128GB, 2.5", SATA 600, SSD
DVD: Sony Optiarc DVR DL 24X,SATA
Casing: Corsair Graphite 600T
PS: I did not manage to find a similar problem on this forum let alone a solution to it. I tried BIOS A vs BIOS B to no avail. Somewhere else I read I may have to flesh the new cards BIOS but how to do so if I cannot even get it to work?
Any help is welcome!Today I received the following I was like really???!!!!
"Dear Sir/Madam,
Thanks for contacting MSI Technical Support Team!
Regarding your concern, there are many possibilities on why the system could
not boot up. Therefore, would you kindly please refer to the suggestions below to
troubleshoot the issue?
1) Unplug all the components and devices on the MB, and then reinstall the CPU,
RAM (one piece), VGA card and power supply only. Please add some thermal
gel on the CPU, and then reinstall the CPU fan correctly and tightly.
2) Clear CMOS (How to clear CMOS, you could refer to the manual), and then
enter bios to Load Optimized Defaults->Save & Exit.
3) Try to boot up the minimum system. If it still cannot boot up, please change
another more powerful power supply for a try;
4) If the problem still persists, please change another RAM with different brand to
try.
5) Please confirm the processor installed is compatible with the MB as well as
the BIOS.
6) If these attempts above does not work, we have to suggest you contact your reseller (The place you bought this MB from) and have them test the MB completely for you to check if this MB is faulty or not, then ask for some help.
If the reseller for some reason can not help, you could try to contact MSI distributor from below http://www.msi.com/service/wheretobuy/ near your place or MSI office from below http://www.msi.com/about/contact-us/
Best wishes,
MSI Technical Support Team!"
So adding a MSI card to my MSI Board mean I have to brake down all of my system, even remove my CPU (running fine) and buy some thermal gel. And while I am in the store buy a more powerful powersupply (mine already meets the specs) and/or ask my reseller to help me out checking if my motherboard (working fine) is faulty?
Well I just RMA'd my 770. So much for plug and play; even MSI parts are not compatible. A real bummer. -
10.4 install woes!
Hi All!
Installed 10.4 and having a bunch of wierdness:
- icons do not show correctly and when they do they looked splattered
- attempts to mount a dmg will not show on desktop
- when using Disk Utility it shows that the dmg is mounted, but still can't do anything with it.
My system:
-G3 BW (r.1)/ XLR8 G4/600
-300 Gig Maxtor HD (SATA)/ Firmtek/1s2 HD Controller
Any advice?
Thanks, samI updated this old mac over the last few years..
Added a G4/600 processor, DVD/ CD writer and have been using OSX since it came out with no issues.
Just upgraded the HD from 9gigs to a SATA 300 gig drive (firmtek/1S2 HD controller card) and am awaiting some ram to get this up to 1gig, so I'm kinda stuck with this for a while.
OS is currently at 10.4.6 and everything appears smooth, but I have nothing installed, which will be the real test.
Looks like my firewire HD has some issues as an older dmg that was working previously isn't mounting now. Any thoughts on how to repair this external firewire HD? -
Radeon 9600 for mac g5 driver problems
I have a g5 power pc with a radeon 9600 pro. When I hook it up via dvi/hdmi to my 1080 p projector, the projector recieves the correct resolution 1920/1080 but dvd's play choppy. If I change the resolution to 800.600 the dvd's play fine. Why???
Hi Glenn, the 9600 isn't fast enough...
1920 * 1080 = 2073600
800 * 600 = 480000
2073600 / 480000 = 4.32
The higher resolution requires 4.32 times as much VRAM, & 4.32 times the speed Gpu to display the same thing on a larger screen.
See japamacs page here on the best AGP cards for G4s & G5s...
http://www.jcsenterprises.com/Japamacs_Page/Blog/4B4B7BA2-7ABB-47F1-87AC-B03D379 42BEE.html -
DVD burner no longer working on Touchsmart 600
I hope this is the correct forum. I have a Touchsmart 600 series and my DVD burner no longer reads DVDs or CDs, either digital, music or video. When I attempt to burn a DVD through Windows Media Player, WMP goes through all the motions of burning it but the CD is still blank. It had been working intermittently up through September and stopped working in November. The DVD burner didn't always work since I got the machine 2 years ago. Sometimes it would stop reading the disk but would work after a reboot. Now it won't even do that.
I have updated the drivers for it and it didn't seem to have an effect.
OS: Windows 7we have lots of docs on HP.COM and there are a lot of steps in them - I'd try them here are a couple links:
can't read:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01897812&tmp_task=solveCategory&cc=us&dlc=en&ju...
Can't write:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01897819&tmp_task=solveCategory&cc=us&dlc=en&ju...
good luck
bill
I'm a HP employee -
Windows 8 Installation DVD not recognized by TouchSmart 600
I am trying to install Windows 8 on my TouchSmart 600-1305t PC (Product #: XL730AV#ABA ).
The problem is that my computer does not recognize the Windows 8 installation DVD I purchased. Is there a solution to this problem? I would ideally like to dual boot the operating systems at startup. Thank you for your help.Hello,
Thanks for the update and your answer.
In case you need anything else, do not hesistate in contacting us.
Thanks,
Regards
I work for HP! Please remember to provide and if this helped click ON -
I have just bought the pavilian x2 and the 600s external drive. I can find the dvd drive in device manager but that is as far as I can get. I works on my daughters HP laptop but not mine. Where can I find the solution.
Hello Mikeaelgraham,
Did you mean to say "It works on my daughters HP laptop but not mine"?
If so, it shows up in the device manager but not as a drive in This PC (Computer) in Windows 8.1?
I would go back to the device manager and uninstall the drive there, restart the computer and let it reinstall again when you plug it back in.
See if in will play a disk with any dvd player like VLC Player, Cyberlink DVD or whatever you have installed.
If still no joy and considering its brand new, you can contact HP Support directly and get further support or a replacement.
Contact HP -USA Phone Assist | HP® Official Site
If you are not in the USA, click here for the appropriate link to your area for Phone support.
Hope it helps. -
DVD from multiple flash files shows "loading" across 8/600 swf files
I got tossed into the middle of editing a training dvd that is composed of several swf files. I've made minor edits to content (spelling, grammer, etc), when I re-burn the dvd there are 8 files that display "loading" in blue upon opening (all files do this throughout the dvd) but with these particular files it never goes away. It remains on the screen and visible underneath or behind the text. Nearly 2 months ago, a round of edits was necessary and these same 8 files behaved normally. Three of the eight files were not edited in either round, were fine on the last burn, and are now displaying the "loading" constantly. Would anyone have any suggestions to fix this?
The DVD is throwing a bit of a twist into it. I'm assuming you mean data DVD first off and this is all executable projector based content?
The best thing you can do to start is play the content in the Flash IDE so the debugger has a chance to show you any errors. Load the project and then run the debugger (CTRL/CMD + SHIFT + ENTER) and let us know if you see any errors show up. Chances are you're hitting a snag and it's no longer running code properly. -
HP TouchSmart 600 PC Windows 7 64-bit TS-T633P CDDVDW Drive wil not read CD DVD Media
Is there a firmware or driver for the TS-T633P CDDVDW drive that will allow it to read CD AND DVD discs. Have tried troubleshooting resources from HP and Windows with no results. The CDDVDW drive make a loud huming sound and stops
trying to read. The drive is recognized by windows and windows states the driver is up to date. I have review many suggestions from other sites and thought I would seek help here. Any good suggestions? Also tried to change the region to 1 which is the USA and for some reason it will not allow me to reset it from region 4. I am not from South America. Dont know how this happen.
Have uninstall driver and get the same results.Hello again,
Try to do this, press F11 to boot into your recovery manager when you reach the options for your recovery press
ALT GR+D, a admin command prompt should appear.
Insert a CD/DVD and try to find the drive letter for your drive, either E,F,etc...try to insert a data CD and type "dir" to show you the content of the drive.
If this fails, you must replace your drive.
Thanks,
I work for HP! Please remember to provide and if this helped click ON -
HP TouchSmart 600 PC Windows 7 64-bit TS-T633P CDDVDW Drive wil not read CD DVD Media Options
My computer crashed and I had to take it back to factory settings.....but it will not recognize the CD/DVD ROM.....can someone please tell me how or where I can download the correct driver.....? I have uninstalled and let windows reinstall .....and it still will not recognize it.
Thanks!
This question was solved.
View Solution.Hi:
Please see if the Microsoft fix-it tool restores the drive for you.
http://support.microsoft.com/mats/cd_dvd_drive_problems/
If the automatic fix it tool doesn't work try the manual fix (Let me Fix it Myself) which you can read at the link below regarding editing the registry.
http://support.microsoft.com/kb/982116
Paul -
Hi everyone! The problem is basically it just doesn't want to write/burn any brand of cd/dvd anymore . It worked just fine for little more than year and recently developed that problem. I'm sure its not the media brands as I've tried with many. The problem persists with Nero, Alcohol120%, MagicISO, PowerISO, Burn4Free, no matter what I try to burn- ordinary data, audio, programs or images. Note that I'm able to write with Alcohol successfully but there's actually nothing on the CD and Nero burns the data also but fails to verify afterwards and gives an error. Writing on DVD R/RWs is completely unsuccessful creating coasters. Also the drive opens itself with no reason and whenever it wants. I have Toshiba A200-1MB notebook running original Vista Home Premium. Here is an error report, hope it'll help. Thanks and any help given is much appreciated!!!
Windows Vista 6.0
IA32
WinAspi: -
NT-SPTI used
Nero Version: 9.2.6.100
Internal Version: 9, 2, 6, 100
(Nero Express)
Recorder: <TSSTcorp CD/DVDW TS-L632D>Version: TO04 - HA 1 TA 0 - 9.2.6.100
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : via Inquiry data
CD-ROM: <TSSTcorp CD/DVDW TS-L632D>Version: TO04 - HA 1 TA 0 - 9.2.6.100
Adapter driver: <IDE> HA 1
=== Scsi-Device-Map ===
=== CDRom-Device-Map ===
TSSTcorp CD/DVDW TS-L632D E: CdRom0
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
BUFE : 0
Physical memory : 2037MB (2086276kB)
Free physical memory: 864MB (885052kB)
Memory in use : 57 %
Uncached PFiles: 0x0
Global Bus Type: default (0)
Check supported media : Disabled (0)
13.10.2009
CD-ROM (ISO)
02:27 ????. #1 Text 0 File SCSIPTICommands.cpp, Line 452
LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL
02:27 ????. #2 Text 0 File Isodoc.cpp, Line 6940
Iso document burn settings
Determine maximum speed : TRUE
Simulate : FALSE
Write : TRUE
Finalize CD : FALSE
Multisession : TRUE
Multisession type: : Start multisession
Burning mode : TAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE
02:27 ????. #3 Text 0 File Burncd.cpp, Line 3257
TSSTcorp CD/DVDW TS-L632D
Super Link activated
02:27 ????. #4 ISO9660GEN -11 File Geniso.cpp, Line 3349
First writeable address = 0 (0x00000000)
02:27 ????. #5 Text 0 File ThreadedTransferInterface.cpp, Line 1017
Removed 2 run-out blocks from end of track 0. Length: 2885 -> 2883.
02:27 ????. #6 Text 0 File Burncd.cpp, Line 3587
Turn on Track-At-Once, using CD-R/RW media
02:27 ????. #7 Text 0 File ThreadedTransferInterface.cpp, Line 1017
Removed 2 run-out blocks from end of track 1. Length: 2885 -> 2883.
02:27 ????. #8 Text 0 File ThreadedTransferInterface.cpp, Line 1017
Removed 2 run-out blocks from end of track 1. Length: 2885 -> 2883.
02:27 ????. #9 Text 0 File DlgWaitCD.cpp, Line 294
Medium type in the drive: Unknown
Lowest/Highest CLV write speed: 3x/1219560x
Recorder min/max supported write speed: 4x/9226724x
02:27 ????. #10 Text 0 File DlgWaitCD.cpp, Line 313
Last possible write address on media: 359846
Last address to be written: 2884
02:27 ????. #11 Text 0 File DlgWaitCD.cpp, Line 325
Write in overburning mode: NO (enabled: CD)
02:27 ????. #12 Text 0 File DlgWaitCD.cpp, Line 2882
Recorder: TSSTcorp CD/DVDW TS-L632D;
CDRW code: 00 97 10 00; CD manufacturer unknown
ATIP Data:
Special Info [hex] 1: D1 00 C6, 2: 61 0A 00 (LI 97:10.00), 3: 4F 3B 4A (LO 79:59.74)
Additional Info [hex] 1: 02 4A B0, 2: 5C C6 26, 3: 00 80 80 (invalid)
02:27 ????. #13 Text 0 File DlgWaitCD.cpp, Line 500
>>> Protocol of DlgWaitCD activities: <<<
=========================================
02:27 ????. #14 Text 0 File ThreadedTransferInterface.cpp, Line 744
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2885 (2885) = #2885/0:38.35
relocatable, disc pos for caching/writing not required/ required
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2883 blocks [E: TSSTcorp CD/DVDW TS-L632D]
02:27 ????. #15 Text 0 File ThreadedTransferInterface.cpp, Line 946
Prepare [E: TSSTcorp CD/DVDW TS-L632D] for write in TAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc not fixated
Tracks 1 to 1: Idx 0 Idx 1 Next Trk
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 307200 6215680, ISRC ""
DAO layout:
===========
___Start_|____Track_|_Idx_|_CtrlAdr_|_____Size_|__ ____NWA_|_RecDep__________
-150 | lead-in | 0 | 0x41 | 0 | 0 | 0x00
-150 | 1 | 0 | 0x41 | 0 | 0 | 0x00
0 | 1 | 1 | 0x41 | 2885 | 0 | 0x00
2885 | lead-out | 1 | 0x41 | 0 | 0 | 0x00
02:27 ????. #16 Text 0 File ThreadedTransferInterface.cpp, Line 1017
Removed 2 run-out blocks from end of track 1. Length: 2885 -> 2883.
02:27 ????. #17 Text 0 File SCSIPTICommands.cpp, Line 242
SPTILockVolume - completed successfully for FSCTL_LOCK_VOLUME
02:27 ????. #18 Text 0 File Burncd.cpp, Line 4320
Caching options: cache CDRom or Network-Yes, small files-No (<64KB)
02:27 ????. #19 Phase 24 File dlgbrnst.cpp, Line 1767
Caching of files started
02:27 ????. #20 Text 0 File Burncd.cpp, Line 4442
Cache writing successful.
02:27 ????. #21 Phase 25 File dlgbrnst.cpp, Line 1767
Caching of files completed
02:27 ????. #22 Phase 28 File dlgbrnst.cpp, Line 1767
Speed measurement started
02:27 ????. #23 Text 0 File ThreadedTransferInterface.cpp, Line 2676
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
02:27 ????. #24 Text 0 File ThreadedTransfer.cpp, Line 273
Pipe memory size 590400
02:27 ????. #25 Phase 29 File dlgbrnst.cpp, Line 1716
Speed measurement completed: 307.7x (46???*160 KB/s)
02:27 ????. #26 Phase 36 File dlgbrnst.cpp, Line 1767
Burn process started at 4x (600 KB/s)
02:27 ????. #27 Text 0 File ThreadedTransferInterface.cpp, Line 2676
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
02:27 ????. #28 Text 0 File MMC.cpp, Line 21875
Set BUFE: Super Link -> ON
02:27 ????. #29 Text 0 File ThreadedTransfer.cpp, Line 273
Pipe memory size 83836800
02:27 ????. #30 Text 0 File MMC.cpp, Line 17311
<TSSTcorpCD/DVDW TS-L632D> start Close Track #2
02:28 ????. #31 Text 0 File DVDPlusDualLayer.cpp, Line 1424
SetDriveCaps: Set LAST LBA of layer 1 to 0
02:28 ????. #32 Phase 37 File dlgbrnst.cpp, Line 1767
Burn process completed successfully at 4x (600 KB/s)
02:28 ????. #33 Phase 78 File dlgbrnst.cpp, Line 1767
Data verification started
02:28 ????. #34 Text 0 File ThreadedTransferInterface.cpp, Line 1017
Removed 2 run-out blocks from end of track 1. Length: 2885 -> 2883.
02:28 ????. #35 Text 0 File ThreadedTransfer.cpp, Line 273
Pipe memory size 590400
02:28 ????. #36 SPTI -1064 File SCSIPassThrough.cpp, Line 215
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1064)
CDB Data: 0x28 00 00 00 00 00 00 00 01 00 00 00
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x21
Sense Qual: 0x00
Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 21
Buffer x0a5a6500: Len x800
02:28 ????. #279 SectorVerify 20 File Cdrdrv.cpp, Line 11185
Read errors from sector 0 to 1055
02:28 ????. #280 CDR -1222 File Writer.cpp, Line 203
Verification aborted, too much errors
E: TSSTcorp CD/DVDW TS-L632D
02:28 ????. #281 Phase 81 File dlgbrnst.cpp, Line 1767
Data verification failed
02:28 ????. #282 Text 0 File SCSIPTICommands.cpp, Line 289
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME
02:28 ????. #283 Text 0 File Cdrdrv.cpp, Line 11243
DriveLocker: UnLockVolume completed
02:28 ????. #284 Text 0 File SCSIPTICommands.cpp, Line 452
UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL
Existing drivers:
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon
Message was edited by: velkoto
Message was edited by: velkotoTry removing the CD/DVD Filters from the Registry.
When CD/DVD related software is installed (such as iTunes, Nero, virtual CD software), they install filters into the registry, which can cause compatibility problems.
1) Run Regedit (Start -> Run -> Regedit)
2) Navigate to HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class\{4D36E965-E325-11CE-BFC1-08002BE10318}
3) In the right pane, delete the "UpperFilters" key, and delete the "LowerFilters" key.
4) Reboot.
If your CD/DVD programs stop working, you will need to reinstall them (preferably with an updated version).
This utility can remove the filters for you:
http://www.csd.toshiba.com/content/support/bulletins/su2065061/RmvFltrs.exe
Also remove any dust on the lens using a clean microfiber cloth.
Maybe you are looking for
-
500k profile after disruption and new line install...
Hello, Status: I have an open fault logged with BT; Phone line ok but broadband speed low, profile appears stuck at 500k. History: sporadic BBand connection and noisy phone line followed by outright failure of both. Engineers visited and confirmed
-
When will FireFox work with Avast?
There wasn't anywhere to post this question and I'm not going to upgrade to 10 to submit it. I'm on 3.6 and Firefox is going to lose a customer because Firefox won't work with Avast. Firefox is up to v.10 and I haven't seen any indication or informat
-
Reinstalling Tiger from Leopard on a iMac G-5
Can I reinstall Tiger from Leopard on iMac G-5 without loosing data? I would like to use OS9 again. Thanks. Ken Thomson
-
Help- something has happened in that mhy iCloud/find my iPhone is not opening up- all I see is a blue background and the whirling wheel...
-
Photoshop touch not compatable with Galaxy Note 3?!
The google play store says neither the phone version or tablet version is compatable with my Verizon Galaxy Note 3 (using android version 4.3). Can you please do something to fix this so I can download the app?