60005,RF: Interference Profile Failed in radio 2.4GHz, per controller profile settings

Can someone please explain to me what seeing this on WLC Config Analyzer means?
Thanks...

You are seeing this message (also in the log of the WLC) because the level of interference for the 2.4Ghz radio of the particular access-point is higher than the configured (or recommended) threshold.
You can find this information on the WLC on Monitor -> Access Points -> Radios -> 802.11b/g/n. You can tune those threshold on Wireless -> 802.11b/g/n -> RRM -> General.
The question for now is how high are those values and do you have problems because of this and the answer to that question is; it depends. If you think the values are too high or if you experiencing issues I would go to the location with a spectrum analyzer and see if I find the cause of the interference.

Similar Messages

Cisco 4402 LAP1131 Interference Profile Failed for Base Radio MAC:

Dropped connections every day, few times a day.
WLC Was working perfectly fine for about a year then had some dropped connections.
Upgraded to the latest firmaware and also default it to the factory and reconfigured it.
Same problem!
Cisco 4402
Software Version 7.0.98.0
8x Cisco: AIR-LAP1131AG-A-K9 also v/7.0.98.0
Interference Profile Failed for Base Radio MAC:

This is a threshold parameter: "Interference Profile failed" along with some others. All this does is send alerts to the WLC log, to your syslog or to your WCS/NCS or Prime Infrastructure management tool. You need to adjust these for your environment if you see too many alerts being triggered. Interference can be a main issue in downtown big citites and you would bump the value up to reduce the number of alerts you see. Yes interference will cause issues, but this is an alert threshold and will not fix your interference, just tell you that you have interference due to hitting the X value.
Thanks,
Scott
*****Help out other by using the rating system and marking answered questions as "Answered"*****

Save of framework profiles failed

Hi all,
I tried to create one CIC framework and add one Action Box into that. After configuring profile of Action Box, assigned the framework to a CIC profile. When running T-code CIC0, the error message "save of framework profiles failed" would occur. Do you have any idea about that? Any suggestion will be appreciated.
Regards,
Julian

Hi,
Please read note 121627 regarding Number range interval , this should help to solve for you.
Kind Regards
OLivia

Export Profile Failed error message

Hi,
I'm trying to build a profile using DNG Profile Editor and a ColorChecker.
At the end of the process I got the message "Export Profile Failed"
I've checked (and followed) all tutorials available. It should be ok.
I made a search for "Export Profile Failed" and found nothing about it.
Did someone got the same message?
Best regards,
Fernando

Hi!
I am thrilled with the possibility of fast and simple color standardizing, that the new DNG Profile Editor seems to open up. I tried to create profiles for 2 Fuji Cameras (E 900 and S 9600) and a Nikon D200, according to tutorial 5. This worked fine with the Nikon. However, when opening the DNG files from the Fujis, the color circles for white and turqoise had swapped places. I moved them to their proper places, but when I clicked "Create Color Table", I got an error message "Can't read color patches. Please use the four color circles to identify the four corner patches of the chart and try again."
Is there any cure? I'm on a Mac 10.4.11.
Kind regards - Hening Bettermann.

Error: "Retrieving user profile failed. Please try again later"

All day I've been getting "Retrieving user profile failed. Please try again later" when I try webmail,verizon.net. What can I do?

Hi sorry to hear you are having an issue with our website. I would recommend clearing the cache and cookies in your web browser.
If you are using IE you can do the following
1. Open IE
2. Click on Tools
3. Select Internet Options
4. Then click on <delete> under browsing history, and put a check in all the boxes
After it completes re-open IE and try it again.
Shamika_Vz Verizon Support
Notice: Content posted by Verizon employees is meant to be informational and does not supersede or change the Verizon Forums User Guidelines or Terms or Service, or your Customer Agreement Terms and Conditions or Plan.

Time profile failed

Does anyone got this pop up message saying Time profile failed is the header and message is Time profiles was not authorized by the user.
It happens everytime i open any application since i updated to Mac Os Lion.
Please give some answer if you know anything about it.
Regards,

I recieve this constantly after I installed an older version of Xcode 4.2 alongside the current Xcode 4.2 Developer Preview 7.
I attempted to install the Xcode 4.2 Developer Preview 7 again to hopefully allievate the issue but it still happens and leaves me unable to perform certain tasks. Most importantly: attach the debugger to the iOS Simulator.
Any action that would require elevated permissions, e.g. unlocking a configuration within "System Preferences", will no longer work.
The only temporary resolution that I have found is to restart the system. However, once the first prompt appears I know that I will be unable to perform certain operations.

Installing Configuration Profile Fails

A configuration profile is required to install security certificates to iPad.
Created a configuration profile with iPhone Configuration Utility 2.2. Utility recognizes iPad, but clicking "Install" button on "Configuration Profiles" page does nothing (no error message, nothing). Sending the profile by Email to iPad gives "Mail Cannot Open This Attachment" error when opening configuration profile.
I have previously created and installed profiles successfully to iPhones and the profile created above works in iPhone (3.1.3).

Answering to my own question. I was able to create and install configuration profiles successfully by creating another user account in OS X and using that to install profiles.

I just created a new profile/user on my MacBook Pro. My pointer/mouse. It works fine in my older user profile, but when I go to the new profile my mac will not respond to clicks. Mouse moves but will not click. Already tried restarting and the pram zap.

I just created a new profile/user on my MacBook Pro. My pointer/mouse on my trackpad. It works fine in my older user profile, but when I go to the new profile my mac will not respond to clicks. The Mouse moves but will not click. Already tried restarting and the pram zap. The problem starts when I log out of my main profile. I get to the login screen and my laptop stops responding to clicks. When I manage to make my way back to my main profile the mouse works perfectly. Should I just delete the new profile and try again?

If the modem is also a router, either use the modem in bridge and run pppoe client on the TC.. that is assuming ADSL or similar eg vdsl. If it is cable service.. and the modem is a router, then bridge the TC.. go to internet page and select connect by ethernet and below that set connection sharing to bridge.
Please tell us more about the modem if the above gives you issues.

User Profile Incremental Sync does not views changes in profiles.

User Profile Incremental Sync does not views changes in profiles. I make full sync - all ok. then I change the phone number for example, and then start incremental sync and nothing moves to AD.
All the stages of FIM sync just state 0 records to process. Looks like it does not see the changes
1.profile property is set up to sync with AD attribute (with EXPORT).
2.no errors in Windows logs or FIM UI client, nor in sharepoint UI
3. sharepoint server 2010 SP1, "CU June 2012" 14.0.6123.5002
4. I have just reprovisioned sync service, set up AD connections and property-attribute relations. before
there was this problem http://social.msdn.microsoft.com/Forums/en-US/cb2b8aeb-d1b6-49a6-a788-2491ca45308a/critical-error-6398-userprofileimportjob-problem-profile-sync-malfunction?forum=sharepointadminhttp://social.msdn.microsoft.com/Forums/en-US/cb2b8aeb-d1b6-49a6-a788-2491ca45308a/critical-error-6398-userprofileimportjob-problem-profile-sync-malfunction?forum=sharepointadmin,
which I resolved by clearing timer service cache.
Help with advice, urls or solurions please..

Hi VlH,
According to your description, the issue can be caused by the Profile or Profile Values table.
You can check the event log and ULS log to see detail error message.
To check event log, click the Start button and type “Event Viewer” in the Search box.
For SharePoint 2013, by default, ULS log is at
C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\15\LOGS
For your issue you can refer to the similar thread:
http://social.technet.microsoft.com/Forums/sharepoint/en-US/bc3cd2ff-dc12-4223-a80b-e4cae616e861/user-profile-sync-doesnt-update-the-profiles-from-ad?forum=sharepointadminlegacy
Also a good blog for user profile synchronization:
http://www.harbar.net/articles/sp2010ups.aspx
Best Regards,
Eric
Eric Tao
TechNet Community Support

The new Sony DSC-RX10 Lens Profile does not appear in the Enable Lens Profile Develop Module.

The new Sony DSC-RX10 Lens Profile does not appear in the Enable Lens Profile Develop Module.
The wrong lens F3.5/6.3 profile is checkmarked and I can not find the new RX10 Sony 70-200 F2.8 G SMM11 profile. The meta data in the Library module correctly list the Sony RX10 and the Correct lens.
How may I select the correct lens profile for my Sony DSC-RX10?

Ask in the PS/ LR/ ACR forums
Mylenium

When I open Firefox, I'm prompted to create a profile, but every time I click the create profile button, the window opens and immediately shuts.

I've uninstalled and reinstalled mozilla several times. I've read online about looking for a profile.ini file, that file does not exist on my computer. Everytime I open firefox, the choose user profile box appears, and when I click create profile, a window opens and immediately closes.

If even the Mozilla folder isn't there then it is possible that Firefox already crashes before being able to create that folder structure.
Try to do a clean reinstall and delete the Firefox program before (re)installing a fresh copy of the current Firefox release.
*Download the full Firefox installer and save the file to the desktop http://www.mozilla.org/en-US/firefox/all.html
If possible uninstall your current Firefox version to cleanup the Windows registry and settings in security software.
*Do NOT remove "personal data" when you uninstall your current Firefox version, because this will remove all profile folders and you lose personal data like bookmarks and passwords including data in profiles created by other Firefox versions.
Remove the Firefox program before installing that newly downloaded copy of the Firefox installer.
*(32 bit Windows) "C:\Program Files\Mozilla Firefox\"
*(64 bit Windows) "C:\Program Files (x86)\Mozilla Firefox\"
*It is important to delete the Firefox program to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
*http://kb.mozillazine.org/Uninstalling_Firefox
Your bookmarks and other personal data are stored in the Firefox profile folder and won't be affected by an uninstall and (re)install, but make sure that "remove personal data" is NOT selected when you uninstall Firefox.
*http://kb.mozillazine.org/Profile_folder_-_Firefox
*http://kb.mozillazine.org/Profile_backup
*http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Clean_reinstall
Boot the computer in Windows Safe Mode with network support (press F8 on the boot screen) as a test.
*http://www.bleepingcomputer.com/tutorials/how-to-start-windows-in-safe-mode/
Do a malware check with several malware scanning programs on the Windows computer.
Please scan with all programs because each program detects different malware.
All these programs have free versions.
Make sure that you update each program to get the latest version of their databases before doing a scan.
*Malwarebytes' Anti-Malware: http://www.malwarebytes.org/mbam.php
*AdwCleaner: http://www.bleepingcomputer.com/download/adwcleaner/ http://www.softpedia.com/get/Antivirus/Removal-Tools/AdwCleaner.shtml
*SuperAntispyware: http://www.superantispyware.com/
*Microsoft Safety Scanner: http://www.microsoft.com/security/scanner/en-us/default.aspx
*Windows Defender: http://windows.microsoft.com/en-us/windows/using-defender
*Spybot Search & Destroy: http://www.safer-networking.org/en/index.html
*Kasperky Free Security Scan: http://www.kaspersky.com/security-scan
You can also do a check for a rootkit infection with TDSSKiller.
*Anti-rootkit utility TDSSKiller: http://support.kaspersky.com/5350?el=88446
See also:
*"Spyware on Windows": http://kb.mozillazine.org/Popups_not_blocked

Failed to start service 'Web Farm Controller Service (WebFarmService)'

Hi,
Has any one had a similar issue when trying to set up the Web Site Cloud REST point?
I am trying to install the 'Web Sites service and third party dependencies' but I get the following error when trying to set up this feature:
500 Internal Server Error - Failed to configure databases and services: Failed to start service 'Web Farm Controller Service (WebFarmService)'.
The event logs show the following:
Service cannot be started. Microsoft.Web.Farm.WebFarmException: The type 'HostingController.HostingConfigManager' could not be loaded. The configuration settings may not be valid ---> System.Reflection.TargetInvocationException: Exception has been
thrown by the target of an invocation. ---> Microsoft.Web.Hosting.WebHostingObjectNotFoundException: No default connection string was found.
at Microsoft.Web.Hosting.SiteManager.GetDefaultConnectionString()
at Microsoft.Web.Hosting.SiteManager..ctor(RetryPolicy retryPolicy)
at HostingController.HostingConfigManager.ControllerHealthCheck()
at HostingController.HostingConfigManager..ctor(WaitCallback changeCallback)
--- End of inner exception stack trace ---
at System.RuntimeMethodHandle._InvokeConstructor(Object[] args, SignatureStruct& signature, IntPtr declaringType)
at System.Reflection.RuntimeConstructorInfo.Invoke(BindingFlags invokeAttr, Binder binder, Object[] parameters, CultureInfo culture)
at System.RuntimeType.CreateInstanceImpl(BindingFlags bindin...
everything is running using a domain admin account, I have tried to start the service manually but it fails with the following error message:
Windows could not start the Web Farm Controller Service service on Local Computer: Error 0x80131500: 0x80131500
Any Help would be appreciated.
Thanks
Doug

I uninstalled the Web Farm Framework and reinstalled it from the Web Platform Installer. That worked. The next error was:
Could not find stored procedure 'runtime.hostingConfigurations_getHostingConfiguration_v25' and to fix that I set the connection string to find the Hosting database with this PowerShell
Import-ModuleWebSites
Set-WebSitesConnectionString -ConnectionString "Server=denalidue;User Id=sa;Password=xxxxxx;Initial Catalog=Hosting" -Type Hosting
now Web Sites service completes and then in Management Server I am getting crypto errors (Unexpected
cryptographic
exception
occurred) even when I run the simple PowerShell:
Get-WebSitesServer
-ServerType
Controller

When loading multiple profiles, Flash based pages crash the last launched profile

I launch multiple profiles to load groups of web pages. Anywhere from 1-4 profiles in the morning (but not all at once). If one profile is completely loaded and has flash elements, when I launch the next profile that has flash based elements, the last profile launched will crash that instance of Firefox. This did not happen in Beta 11, but does happen in Beta 12 or RC1.
I am running Win7 64-bit with the latest version of Flash (10.2.152.32). 24GB of RAM, Dual Xeon's, Intel SSD.

If this isn't support then why oh why does Firefox have a Profile Manager to do this?

I created an administrator pseudo profile and made my profile standard. but when i restarted there another profile in my log-in page. when i log in to that unknown profile i cannot log-in. what is that profile and how can i delete it? thanks

i have a rmbp 15" osx.. my case is this: i created an administrator pseudo profile and made my profile standard. wel i read from another forum, to strengthen my malware security.. but when i restarted there's another profile in my log-in page stating "needs updating". when i log in to that unknown profile i cannot log-in. what is that profile and how can i delete it? thanks

Resetting User Account Password (10.7 +)
1) Boot into your Recovery Partition holding down command + R at the startup chime
2) Select 'Terminal' from your Utilities Menu Bar
3) Type the following bolded command in: resetpassword
4) From the window that appears, select your boot volume and the appropriate user account
5) Type in the new password and confirm the new password
6) Click Save, close this pane and quit Utilities
7) Select your boot volume when presented with choose startup disk and reboot your machine

Multiple iTunes Match accounts (one per Windows profile)?

Hi,
Forgive me if this subject had been covered before (I did have a quick dig), but is it possible to have seperate iTunes Match accounts, one per Windows profile (on the same box)?
Our Windows 7 system has multiple users and we don't want to merge music into one library just to get Match working. Is it the case that it's limited by MAC address / physical hardware? (I don't want to go down the route of having one network interface per windows profile either!)
If somebody from Apple reads this, are there any plans to support this future iTunes releases? It would bring you more revenue with a household willing to pay for more than one subscription...
Many thanks,
Matt.

You can authorize a single copy of iTunes to up to five iTunes Store accounts. So yes, you can have both your account and one for your daughter in the same system.

60005,RF: Interference Profile Failed in radio 2.4GHz, per controller profile settings

Similar Messages

Maybe you are looking for