6003f error on OS X Recovery

My MacBook Air (purchased on October 2012) crashed. I erased the drive and used OS X recovery to reinstall Mountain Lion. Since I had already purchased Mountain Lion, once my computer was working again, I downloaded it. Installation of Mountain Lion marked an error towards the end and my computer froze.
I forced restart and upon restart I got the blinking folder. I tried cmd + R to launch OS X Recovery and I got error 6003f. I tried connecting to wifi with option key, and after connecting successfully, I still get the same error. I'm in Mexico so I don't have any available stores. Help please :(

What you to do is to pick up the telephone and call AppleCare, you have 90 days of free AppleCare telephone support with a new Mac. I'm not sure where you are located but if you use the link below you will be able to find the telephone number for your country.
http://support.apple.com/kb/HE57
Please post back with the results and if you have not already bought AppleCare I'd strongly recommend you do. The AppleCare rep can tell you what the advantages of it are or you can read up on it at:
http://www.apple.com/support/products/

Similar Messages

2106f Error Code after Internet Recovery Attempt

Anyone ever get a 2106f Error Code after Internet Recovery Attempt? What next?
Background: Macbook Pro (late 2011) shows startup progress bar, goes ~ 1/10th of distance, freezes, then goes black after ~2min. Did this:
1. Clean startup attempt (shift)
2. Zapped PRAM (option command P R)
3. Reset SMC, Startup
4. Attempted Internet Recovery process (Cmd R) over ethernet connection, but after several hours, got the -2106F error.
MacBook Pro 2.2 i7 Late 2011

How long were you able to watch this movie before it crashed?
Now is it everytime you boot up, you get the BSOD 0xc0000001 ?
Can you start up in SAFE MODE?
"Knowledge should be unrestricted and the most important commodity we can offer to help one another."

Getting error while starting managed recovery

Hi,
I am getting error while starting managed recovery.Please suggest.
Please find below error log
ALTER DATABASE RECOVER MANAGED STANDBY DATABASE DISCONNECT FROM SESSION
Attempt to start background Managed Standby Recovery process (OTP3)
Wed Jun 23 19:24:10 2010
MRP0 started with pid=50, OS id=3350
MRP0: Background Managed Standby Recovery process started (OTP3)
Fast Parallel Media Recovery enabled
Managed Standby Recovery not using Real Time Apply
Warning: Recovery target destination is in a sibling branch
of the controlfile checkpoint. Recovery will only recover
changes to datafiles.
Datafile 1 (ckpscn 296765005228) is orphaned on incarnation#=1
MRP0: Background Media Recovery terminated with error 19909
Errors in file /ora/app/oracle/admin/OTP3/diag/rdbms/otp3/OTP3/trace/OTP3_mrp0_3350.trc:
ORA-19909: datafile 1 belongs to an orphan incarnation
ORA-01110: data file 1: '/ora_ots_gdb1/oradata/OTP3/datafile/o1_mf_SYSTEM_REORG1_.dbf'
Errors in file /ora/app/oracle/admin/OTP3/diag/rdbms/otp3/OTP3/trace/OTP3_mrp0_3350.trc:
ORA-19909: datafile 1 belongs to an orphan incarnation
ORA-01110: data file 1: '/ora_ots_gdb1/oradata/OTP3/datafile/o1_mf_SYSTEM_REORG1_.dbf'
MRP0: Background Media Recovery process shutdown (OTP3)
Completed: ALTER DATABASE RECOVER MANAGED STANDBY DATABASE DISCONNECT FROM SESSION

Hi,
The standby database has been activated previously but since then reverted back into its standby role. Prior to the
RMAN duplicate operation the "alter system reset control_files scope=spfile sid='*';" has not been executed (i.e. the
control files have not been overwritten).
check the incarnation on both the sides i.e primary & standby
list incarnation of database;
RMAN> reset database to incarnation 2;
database reset to incarnation 2
RMAN> exit
hope you can solve by restting the incarnation.
Thanks

I try to restore my iphone but always error. it keep on recovery mode and i can't do anything., i try to restore my iphone but always error. it keep on recovery mode and i can't do anything.

i try to restore my iphone but always error. it keep on recovery mode and i can't do anything., i try to restore my iphone but always error. it keep on recovery mode and i can't do anything.

Hi, i had the same problem. Try to find the file "apple" or "itunes" don't know it anymore exactly. Ahm well you need to delet any information or just plug in your iphone into an other computer. important is that your iphone never has been pluged in this computer before. This was what i did, and it worked!

HT201413 having error 1 and on recovery mode

Yes gettinf error no 1 on recovery mode can not resort

well 10x but i tried everything it didnt work i searched abt it n they said its hardware problem i took it to repair center couple of shops they couldnt im hopeless so plz if anyone can help or give me a way to make it work again ill be sooo happy

CTO Error while doing a Recovery

I tried doing a system recovery that with the help of the recovery discs provided by HP. I have a windows 8 laptop and I received a set of 4DVDs, 3 of them are for the OS and 1 is for drivers. Everytime after going through the long process of recovery I get an error message that the windows cannot be recovered.
This is the Error Log:
[12:11:58.56] ------------------------------------------------------------------------------------------
***CTO Error condition has been dtected in [Factory Update] phase !! ***
[12:11:58.58] Suggest to create PIN-log and send to TWN PDC NB-PreinPM for further analysis ...
[12:11:58.58] ------------------------------------------------------------------------------------------
[11:34:19.47] Start BBOffline.cmd...
UPDrv=[C:]
[11:34:19.50] Set UIA Error Code to 951
[11:34:19.80] Delete [FBI] folder.
[11:34:19.80] WinPE is 64bit.
[11:34:44.10] Starts [FixUps].
[11:34:44.13] ---------------------------------------------------------------------
[11:34:44.15] FixUps.cmd...
[11:34:49.26] FixUps.cmd completed...
[11:34:49.26] ---------------------------------------------------------------------
[11:34:49.26] Starts [Tweaks for SSRD].
[11:34:49.30] ---------------------------------------------------------------------
[11:34:49.30] SSRD Tweaks to change user default locale...
[11:34:49.30] Copy C:\System.sav\Util\TDC\MCPP\FBIRES\FBIUSRES.DLL.
[11:34:49.45] Run "Dism.exe /image:C:\ /Set-SKUIntlDefaults:en-US ".
[11:36:12.58] ---------------------------------------------------------------------
[11:36:12.60] Launch PININST.exe for Offline ...
[11:43:03.63] Starts [Sleep 10 sec].
[11:43:13.98] Starts [Create RStoneFUpdate.INI].
[11:43:15.91] Starts [create 1GB Pagefile for offline].
Volume in drive C has no label.
Volume Serial Number is 4ED9-F2E1
Directory of C:\System.sav\bbv
05/19/2014 11:43 AM 1,073,741,824 pagefile.sys
1 File(s) 1,073,741,824 bytes
0 Dir(s) 50,673,041,408 bytes free
[11:43:16.13] Brand detection.
[11:43:16.27] Customize error handling for Specialize ~ BBV1.
0 file(s) copied.
[11:43:16.30] ---------------------------------------------------------------------
[11:54:25.70] Check Win 8 configuration...
[11:54:36.72] Check system ID...
[11:54:46.45] Check OS SKU...
[11:54:54.48] Check option code...
[11:55:18.52] Check brand name...
SKU_DEF_COUNTRY=[113]
SKU_DEF_SYS_LOC=[hi-IN]
Reset country in administrator...
Reset country in Default user...
Reset System locale
Deployment Image Servicing and Management tool
Version: 6.2.9200.16384
Error: 1016
An error occurred while attempting to access the image.
For more information, review the log file.
The DISM log file can be found at X:\windows\Logs\DISM\dism.log
Updated System Locale info...
[12:01:16.72] Start PIN Tweaks...
[12:01:18.02] ---------------------------------------------------------------------
[12:01:18.02] PIN Tweaks to hide All for BurnBoot BBV and BBV2 on restored image...
[12:01:18.02] ----------------------------------------
[12:01:18.04] Tweaks for OOBE's Unattend.xml
[12:01:18.04] to pick up the proper file...
[12:01:18.04] ----------------------------------------
[12:01:18.04] rename unattend.org to unattend.or_
[12:01:21.99] ----------------------------------------
[12:01:21.99] without Light Sensor..
[12:01:22.03] ----------------------------------------
[12:01:22.04] This is Restored image by SSRD [SSRD.flg]...
[12:01:22.06] ---------------------------------------------------------------------
[12:01:23.76] Start MIR Tweaks...
[12:01:25.08] ---------------------------------------------------------------------
[12:01:25.08] [MIR Tweaks] ...
[12:01:25.08] ---------------------------------------------------------------------
[12:01:25.78] Start Factory Update(s)...
[12:11:53.90] Start QFE Offline installation...
[12:11:58.48] PININST_OFF: PASSED...
[12:11:58.55] Found some error on PININST_OFF.log...
[12:11:58.56] Check C:\System.sav\Logs\PININST_OFF.log to see which command failed...
I called the customer care regarding this and they asked me to visit the service center. The service center people told me that my recovery disks are not working properly. I am not convinced as they have been used just once before, they seem to be fine and I dont want to order another set of DVDs without being sure that thats the solution.
KIndly Help
Thank you

Hi aniketvyas102,
Thank you for your inqiury, I am happy to help.
Aferr reading your log, it is all related to the software and not hardware. Therefore it is your disks a fault. I suggest contacting HP support and explaining the issue in detail to them. They will be able to provide you some options.
Please call HP technical support at 800-474-6836. If you live outside the US/Canada Region, please click the link below to get the support number for your region HP Technical Support Sitemap.
Sparkles1
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

Satellite L300-1AS - error while creating a Recovery disc

I am trying to create recovery disc for Sat L300-1AS,
I have tried a number of various DVD discs from top quality to DVD-R / DVD+R but each time when the system is verifying the data I get an error message 02016F-3C 00000000
What am i doing wrong please help as frustration is really beginning to kick in now
Thanks

> have tried to update the driver,(T002 & T003) but the systems does not allow it
Seems the firmware has not been released for the CD/DVD drive installed in your notebook.
> only bought it yesterday think I may take it back to the retailer and get a replacement
Yes, maybe you should do this

Re: Error message while creating recovery disc on a satellite L300

I have tried to create my recovery discs on my new L300 laptop. Whilst creating the disc i get the following error:
Failed to read the following file F:\ZZImg|09115XSP.swm (Error code: 020150-20-00000000).
Anyone know what this means, and how to fix this problem? I have a very basic knowledge of IT and haven't got a clue how to sort this out.
Any help would be greatly appreciated. Many thanks in advance.
Luke.

Hi mate
Yes, I know this error
It appears because of usage not fully compatible disks
I had the similar issue and could solve this using another DVD from another manufacturer.
Check this it will help your too..

Error Code 0x116 when recovery install for dv6-3120ew is made - HELP !!

Hello!!
I have a problem with HP DV6-3120ew with Windows 7 Home Premium 64 and ATI ARDEON 5470 HD.
I decided to preinstalled system to new, so I start recovery procedure.
1) I formatted disk C:
2) recovery start unpack files to disk
3) instalation was start, one reset done
4) after restart HP INstallation start install drivers
So right now Blue Screen swhow with code error 0x00000116 and after that sytem restart - loop !!
all the time restart and blue screen ...
I start procedure recovery two times and this same happend.
I used command line and read that system use ATI drivers 8.741.1.1000.
If I start system in Safe Mode Windows can't finished installation and ask me for start sytem as normal.
When I replace atikmpag.sys for vga.sys for standard VGA drivers I receive info that windows can't finished installtion and I have to start installation again.
When after F8 button I try to use VGA resolution - I see black screen without any errors. But system still using I think ATI drivers just resolution is VGA.
So System doesn't work at all.
Right know I want to replace drivers from ATI to standard VGA, how I can do this ?
BR
Zbigi

Hi @Zbigi ,
Thank you for visiting the HP Support Forums and Welcome. I have looked into your issue about your HP Pavilion dv6-3120ew Entertainment Notebook and system recovery failing. Here is a link to the Graphics driver for your system.
You will have to recover the system with your recovery disks that you created. Here is a link to obtaining recovery discs.
Hope this helps you out.
Thanks.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

Getting error during creation of recovery point and synchronization

hi all
i am using DPM 2012 R2 . i am getting following error during recovery point creation.
No recovery point was created, either because synchronization has not occurred since the last recovery point was created, or because no changes were found during synchronization. (ID 208)
i have tried " create a recovery point after synchronization" 6-7 times but its failed.
kindly help me to get out this issue
thanks in advance.
Early reply should be really appreciated.

hi all
i am using DPM 2012 R2 . i am getting following error during recovery point creation.
No recovery point was created, either because synchronization has not occurred since the last recovery point was created, or because no changes were found during synchronization. (ID 208)
i have tried " create a recovery point after synchronization" 6-7 times but its failed.
kindly help me to get out this issue
thanks in advance.
Early reply should be really appreciated.

Recieved error messages while performing recovery to factory state from the hard drive

HP Touchsmart tx2-1165ea, product no:NM515EA,microsoft vista SP1 operating system.
I keep recieving error messages during recovery to factory state from hard drive and perfoming a recovery from my recovery disc hangs on disc2. Therefore I am unable to update vista sp1 to vista sp2 the reson is: error SMI primitive installer failed (ox8007371c).
Reason for recovery ? performed a clean upgrade to windows 7(as rcommended) but I dont like that operating system
Request: kindly rectify my factory shipped recovery partion errors.

Thank you for the clarification.
Typically, service packs have some requirements before they are listed in Windows update. It's really the build ID that determines what updates are listed through Windows Updates. Various Windows Updates will change the build ID and once that prerequisite is reached, service should be listed. I know that service pack 2 does not show in Windows Update until several updates and restarts later on my Vista SP1 system at home.
Have you tried running Windows Update multiple times making sure to install the important updates or did you go straight to trying to manually install the service pack?
1. recovery disc is on the hard drive shipped in the computer from the factory.
I may be reading too much into this, but does this mean the recovery was performed by pressing F11 during boot or by using disks created using the hard drive's recovery partition prior to upgrading to it to Windows 7?
Also, how many times did you attempt the recovery from scratch? Many users have stated simply doing the recovery again took care of the issue and this seemed to be independent of manufacturer.
You can try the registry edit listed here, but registry edits are a little risky and do so at your own risk. However, try the first solution in the registry edit post.
↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

Iphone Unknown Error 40 stuck in recovery mode

Hi,
My question is... if my iphone is stuck in recovery mode and I return it to the shop I bought it from and they give me my money back/replace it etc, if they then do get the phone to work will they be able to see all my data/photos/messages etc? Or will it only restore personal data if the phone is restored from my itunes?
I updated my Iphone 4 via Itunes yesterday and it's now stuck in recovery mode, every time I try to restore the phone it gets to "waiting for iphone" then Unknown error 40 appears.
I have tried the suggestions here:
http://support.apple.com/kb/TS3694
I am going to take it to the apple store genius next week, but first am returning it to the shop I bought it from as they want to see if they can fix it (it was unlocked when I bought it, they claimed it was an apple unlocked phone but I am concerned it was in fact unlocked by them and this is why I am having problems). Hence my question being, will they be able to restore it to my data without access to my itunes to back it up from? Will it just be a factory setting reset if they fix it (which I'd prefer)?
Thanks in advance!
C

Hi Fkaram,
Sorry to say I haven't found a solution (after hours of searching!) and have bought an android moto g. The only difference from yours is that I replaced the dock connector as I kept getting error 4014, which turned it on after being off for three weeks, and then went to error 40.
If you haven't got a warranty, I can only suggest replacing the dock connector. Its cheap (£5) and pretty easy to fix. I only tried this because changing the leads didn't work, but I kept getting the faulty leads error (4014+40)
Good luck!
ps - check for any bent pins or if there is a red/coloured light in the connector itself. I didn't see any bent pins so was lucky the replacement actually did something
Message was edited by: Harry Jones3

Windows could not complete the installation recovery error message with HP recovery discs

While doing a system recovery on an HP G72-b50US notebook using HP purchased recovery DVD's, the reboot "Welcome" screen always (tried 5 recovery attempts from scratch) generates the error message "Windows could not complete the installation. To install Windows on theis compuiter, restart the installation". any attempt at a reboot, even into safe mode, regenerates this same error message. How does this get fixed to allow completion of the installation process?

I wish I could tell you.
I also used the HP factory recovery disks on an 8200 Elite CMT. I used them once before with no problem.
The second time was a show-stopper. The recovery process would ask for all 4 disks, then the recovery installation would begin, reboot continue on, everything normal.
Then on the last reboot, when the recovery program stated it was configuring windows, it just quit and stated Windows could not complete the installation.
I made sure that I had absolutely nothing connected to the PC except the keyboard, mouse and monitor.
The only thing I can possibly think of was that I installed a Radeon HD 6570 video card which I replaced the Radeon HD 6350 card with. However, both cards are supported in the PC, and I cannot remember if I did the restore with the 6350 the last time or the 6570.
Now, the reason the ISO file will work is because this is a plain and simple Microsoft Windows 7 ISO file--the very same one that you download when you purchase W7 online from the very same download site.
It is not PC-specific and will install on any PC in the world.
A recovery disk is PC-specific, and is a very complicated mish-mash of programs, drivers, operating system, all customized for your specific model PC. Even something like installing a new hard drive or memory can foul up the works.
The downside of using the plain MS disk is the only programs and drivers you can install are the ones found on your notebook's support and driver page.
The upside of using the plain W7 installation, is you normally end up with a better performing PC, free of bloatware and unnecessary running processes.
For someone like me, it is a non-issue, but for others, they may miss some of the included software.
But that is better than having a computer that is of no value with no operating system installed, wouldn't you agree?
Paul

Error code = 0xEFFFF01 - HP recovery manager

Hello
I have made backup of my files through HP Recovery and Backup manager, due to some problems i had with my HP PC. I have reinstalled the PC, and now i want to recover my backup. But when i run the HP Recovery and backup manager through the restore.exe file in the backup folder, on my USB-device, I get an error which says Error Code = 0xEFFFF01, and I can't get any futher in the recovery process. I have tried to find an answer to the problem, without luck, which made my way to this forum. I Hope you kan give me some answers about why i can't recover my files.
Thank you in advance
Andreas

Hi @Jørge
Welcome to the HP Support Forums! I see that you are having some problems getting your backed up files from your USB. I also did some research into that error code and didn't find anything either. Let me start by getting your product number so I know what we are working with. Have you tried all the USB ports? You mentioned that you “reinstalled the PC” by that do you mean you used recovery media to bring the computer back to defaults or did you install it from an installation CD?
Please click “Accept as Solution ” if you feel my post solved your issue.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Thank you,
BHK6
I work on behalf of HP

Error: ME is in recovery state (also does not come back from sleep)

Hi,
my name is Ifor and I bought a Lenovo X220 (4290-44G) exactly 2 years ago.
The following happened:
-I noticed an error while booting. The screen said: ME is in recovery state. After that I noticed my computer won't wake up from sleep after I closed the lid. So I installed a fresh windows 7 ultimate install. All the drivers have been downloaded from Windows Update or the Lenovo site.
The error still is not fixed, so I updated my BIOS with the newest .iso file from the Lenovo support site. The error still persists!
Also, my processor gets really warm and my screen sometimes flicker. I've had no problems or what-so-ever before.
All I found was this link and I updated my bios already: http://en.community.dell.com/support-forums/laptop/f/3518/t/19456189.aspx
I would be really grateful if someone could help me.
Kind regards,
Ifor

Same problem with my T420. The Intel(R) Active Management Technology - SOL (COM4) doesn't work either.
Fresh windows 7 pro installed, latest BIOS from Lenovo, flashed CMOS, installed drivers with Lenovo system update software...

6003f error on OS X Recovery

Similar Messages

Maybe you are looking for