6020 won`t connect through Irda

I have a 6020 and I`m trying to connect it via PCSuite.
PCSuite 6.83.14.1
WinXP with SP2
I can`t establish a connection trought Irda. I`ve tried to change the maximum speed to all values available but it didn`t help. Also reinstalling the application didn`t do the trick. What else can I try?

No it doesn`t say anything. I only run the 'connection wizzard' as you might call it, in PCSuite and them the application is waiting for the connection. After some time (a couple dozen sec) a pop-up shows saying where can I get help if I have problems with connection (basicly some PCSuite FAQ that doesn`t say much). I`m not sure at this point if my irda adapter isn`t malfunctioning. I`ve tried to get a connection on two different computers and with two different phones and still nothing. So this will either be: the drivers, PCSuite or the adapter itself. I`ve bought a new one in a good store so I don`t suspect that it`s broken but that might be the cause. I just want to try the two first options before I go with the adapter to the service because if I do it I probably won`t see it for next 3 weeks :/ I`ve searched for some updated drivers but there aren`t any. I`ve read on some other forum that people install drivers for some other but similar model of adapter but it doesn`t work for me - Windows doesn`t want to install them and eventually installs some drivers of its own.
I also can`t find the information on the nokia page about which PCSuite is compatible for which cell type so if any of you happen to know the exact URI I`d be greatful.

Similar Messages

TS5209 Airplay won't connect through my Mac Book Pro but works on everything else.

My MacBook Pro (1 year old) cannot connect through Airplay to my Apple TV. I receive an error message that simply says, "Could not connect to Apple Tv."
The Apple TV and computer are completely up to date. The Apple TV works with all other devices and my Itunes Library shows up in Home Sharing.
I cannot figure this out and I am pretty annoyed with the issue.
Any help?

You reformatted the HD, which was originally formatted for Windows (NTFS format is the typical HD format for Windows).
So you did erase completely its content, and now it is formatted in HFS format (HFS is the typical HD format for Windows).
If you want to employ Time Machine, you need a drive formatted as HFS (Mac), and you cannot use it for any other task.
If you want to share the drive content between Macs and Windows computers, the drive must be formatted for Windows (NTFS format), and then you can read & write over it from a Mac if you installa the Tuxera software on your Mac.
Or you can format it for Mac (HFS format), and then read and write to it by installing the MacDrive software on your Windows computer.
Theoretically, a new disk format exists, which is compatible natively both with Windows and Mac. It is called exFAT (also known as FAT64), and is typically employed for external USB storage units. My experence with eXFAT, however, is unsatisfactory: the Mac tends to corrupt the volume, which needs to be "fixed" using a Windows machine.
Currently all my external USB drives are fromatted as NTFS, and hence I had to installa Tuxera on all the Macs owned by me, my wife and my son. This is very reliable, but it does not allow to use Time Macine.
We employ other backup solutions, with more manual control over what is backed up and what is not... And these do not require that the external disk is formatted as HFS (Mac).

Mail won't connect through Verizon DSL

I've been using Mac Mail for 2 years now without any significant problems. I use an imap account for most of my mail. We just got Verizon DSL at home, and I have no problems with the connection through an internet browser, however my Mail doesn't work any more. I ran the Connection Doctor which says the program is connecting to the internet, but the preferences are set up wrong. I haven't changed anything except the internet provider. I've heard Verizon doesn't support Macs very well, I'm just looking for a way to overshoot this problem.
Thanks!

You need to find out from Verizon what the "incoming mail server" is and what the "outgoing mail server" (SMTP) is. Then put those in your Mail account settings.

BIS WON'T CONNECT THROUGH WIFI

So my phone got wiped, lost everything. When i started to set everything up again (wifi etc) i noticed BIS does not connect through wifi anymore. It did before my phone got wiped. Is this temporary or do I need to do some fiddling around?
Thanks.

Anyone? Still have this issue

I have a 2nd internet location that won't connect through my airport. help!

I live in one place in the week and another at the weekend. when i set up my airport i did so at the weekend address. now i want to connect to the internet through airport at my weekday address and i have no connection. What can i do to solve this problem?

chris, Welcome to the discussion area!
Create a 'location' for home and a 'location' for home. Then switch to the appropriate one. See KB 106653, Using network locations in Mac OS X.

Shrew Soft VPN won't connect through 4G LTE - using Pantech UML290

Hey everyone,
I'm using Shrew Soft VPN to connect to my companies network and can't seem to connect when using the 4G broadband. I have no issues using Ethernet/wifi but for some reason I can't establish a connection with using 4G.
I'm currently using the Pantech UML290 to connect to the 4G network. I tried to switch to 3G to see if there was some type of encryption causing the issue. That doesn't resolve it.
Has anyone else experienced this and found a solution?

I opened a case with Verizon and it seems the problem is on their end. To get access to VPN again, you have to downgrade the VZAccess, downgrade the Firmware (that is "required") to an older version, and uninstall Verizon firmware updates in Add/Remove programs. This is the email that VZ sent me:
Thank you for contacting the Verizon Wireless Data Technical Support department through our website. We are sorry to learn that you are unable to connect to your company's VPN when using your UML290 Modem. We are pleased to assist you.
We can certainly understand your frustration when your device does not work as expected. You should be able to connect to your company's VPN service when using the UML290. We will be providing you with steps to check your VZAccess Manager Software version.
After updating to MR2 (Maintenance Release 2) software, the UML290 may not be able to connect to some VPNs. The MR2 software was included in the VZAccess Manager build 7.6.3 (2642j). To check the current version that you are currently running on your computer, please complete the steps provided below:
1. Launch VZAccess Manager
2. Click Help
3. Select About VZAccess Manager
If you are running VZAccess Manager 7.6.3 (2642j), please downgrade the software. To do so, please complete the steps provided below:
1. Browse to http://www.vzam.net/download/download.aspx
2. Select your Operating System
3. Select the device you are using
4. Select your hardware i.e. Pantech UML290
5. Click Continue
6. Click the Downgrade Utility link located under the Installation Instructions and/or Device Drivers
You should be able to use the steps provided above to downgrade the VZAccess Manager Software. Once this has been completed, you should be able to connect to your company's VPN when using the Pantech UML290.
Make sure you read the read_me.pdf doc packaged with the firmware downgrade utility. There are some steps that are left out of this procedure that are in that doc. Good luck to everyone.
-daddy

IPhone 5s - Vimeo won't connect through bluetooth.

I have an iPhone 5s. The bluetooth connects to the audio system of my car. YouTube broadcasts through my system, the phone and radio apps, etc. all play. However, I can't get Vimeo to play. Is there a setting on Vimeo that I am missing? Suggestions?
Thanks! Debbie

Sit tight and wait for Apple to resolve. This is an ongoing issue, you can look at today thread see that everyone is having issues also.

I did an update to my wife's iPhone and now it won't connect through the 3G. It says you are not connected to a cellular data service

I Updated my wife's iPhone the other to the new operating system. It asked me first to use iCloud backup so I did. After the update was complete my wife can use wifi but when we try the 3G it says you are not connected to a cellular data service.
IT shows Bell as the provider but we seem to have lost something during this update.
can someone help me please.

Check Settings>General>Cellular and make sure Cellular Data is set to On. If it is, try putting it in Airplane mode for 15 seconds, then turn Airplane mode off again. If it persists, give you carrier a call to confirm that it's properly activated with them and that your data plan is properly provisioned.

Macbook Pro/iTunes won't connect to Airplay ATV

Hey guys,
I have a bit of a weird problem here and can't figure out what the issue can be. I have an Apple TV (2nd Generation) and a Macbook Pro (Early 2008) that won't connect through Airplay. I can see the ATV in my Airplay/speakers options but when I select it it just gives a prompt that says "Connecting to Apple TV" for about 2 minutes. After that the message disappears and I find my iTunes is still not connected to ATV.
Now here's the odd part... ATV can play my library through Home Sharing just fine. My iPhone 4, as well as my wife's Macbook (white 2008) both connect fine through Airplay too.
The only thing that has recently changed in my setup is a new router (Sitecom WLR-4000). I've tried rebooting that, also tried turning off IPv6 on my MBP but both didn't change a thing.
Anybody have a possible solution??

It seems like I have located the issue. I went on the Macbook and checked the IPv6 settings (in Lion) and for some reason these said 'off', an option that Lion typically doesn't give. After turning IPv6 on, the Airplay didn't connect on this computer either. Upon trying to turn it off, the 'off' option had disappeared.
Then I found a discussion elsewhere on this forum detailing how to manually turn off IPv6 completely within Lion and it did the trick. Both for the Macbook Pro and Macbook.
Hopefully that was it. It's still odd as I'm still wondering what exactly in the router is blocking it from working, so if someone on here has an idea that's more than welcome.
Here's the explanation to turning off IPv6 for whoever needs it:
https://discussions.apple.com/thread/3202188?start=0&tstart=0

IPhone not connecting through Bluetooth on iMac 21.5 inch with Nvidia 750 M

On my iMac 21.5 with Nvidia 750 M, both of my iPhones (iPhone 5s and iPhone 6) won't connect through bluetooth. I've tried disconnecting my wireless keyboard and mouse. The same connection error would pop-up. *By the way, you can talk in programmer's terms to me.*

An iPhone will not pair via Bluetooth to a computer (Mac or Windows) except for personal hotspot and then only if your cellular plan supports it. https://discussions.apple.com/docs/DOC-7722
If you are attempting to use Handoff/Continuity, that does involve Bluetooth but the devices are NOT paired; Bluetooth just needs to be on and the devices in range of each other. The following may help with Handoff/Continuity issues: http://support.apple.com/kb/TS5458

My 3rd Gen Touch won't connect

It won't connect through my USB cable to my '07 mac desktop. I tried everything.

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

Forgot password.Tried to wipe by using Find my iPhone but won't connect to wifi even though it is turned on in the lock screen.Then tried to restore through iTunes but couldn't because Find my iPad on. Removed the iPad but iTunes still not working. Help!

My daughter stopped using her iPad when she got an iPhone for Christmas. It has been over one month and she has forgotten her passcode. I tried to wipe it via Find my iPhone but it won't connect to the wifi even though wifi is switched on on the lock screen. I then tried to restore it through iTunes but was unable to becuase Find my iPhine was switched on so I removed the iPad from the device list only to find that it didn't solve anything with the iTunes situation and it still won't connect to the wifi. I ahve tried turning wifi on and off, tried leaving the house and re-entering all to no avail. Is there any other way to restore the iPad????

FORCE IPAD INTO RECOVERY MODE
1. Turn off iPad
2. Turn on computer and launch iTune (make sure you have the latest version of iTune)
3. Plug USB cable into computer's USB port
4. Hold Home button down and plug the other end of cable into docking port. Do not release button until you see picture of iTune and plug (very important)
5. Release Home button.
ON COMPUTER
6. iTune has detected iPad in recovery mode. You must restore this iPad before it can be used with iTune.
7. Select "Restore iPad"...
Note: Data will be lost

I'm unable to send and receive email through Apple Mail 4. I've checked my settings on Preferences, and my password to Gmail is up to date for syncing with IMAP, but it still won't connect. Suggestions?

I'm unable to send and receive email through Apple Mail 4. I've checked my settings on Preferences, and my password to Gmail is up to date for syncing with IMAP, but it still won't connect. Suggestions?

I think it's trying to open it in a gMail eMail & is losing your gMail password that it needs log into gMail, but not 100% positive.
Have you tried Right clicking or Control+click on the eMail link & choose Copy? Works on some, not others.

Hi, my ipod (2nd gen) won't connect to the internet via Safari or through apps but my email does work. Any ideas without needing to reset the ipod?

Hi, my ipod (2nd gen) won't connect to the internet via Safari or through apps but my email does work. Any ideas without needing to reset the ipod?

- Have you tried when connected to other networks? Maybe the router is blocking the ports used by Safari and the other apps.
- What kind of network are you using? a personel or bussines?

HPLJ3055 won't print through HPxb3000, but will print if directly connected to dv9000.

HPLJ3055 won't print through HPxb3000, but will print if directly connected to dv9000.

Hey there @pepsitruck
I understand you cannot print from your desktop however, you can print from your laptop.
Could you please run the Print and Scan Doctor again and let me know the results or post a screen image of the results?
This diagnostic tool will check for any conflicts that could be causing the issue. The tool will show you a report at the end. If there was a problem that the tool could not fix, you will notice it in the results.
You can also try manually stopping and restarting the print spooler and try printing from Notepad afterwards.
1. Click Start
2. Type "Services" in the search field.
3. Open SERVICES
4. At the bottom, click "Extended View"
5. Search for Print Spooler
6. Right-click it and choose Properties
7. Select as Automatic in the drop down box, close the Window
8. Right click on Print Spooler and choose "Stop", wait until it stops and then right click again and "Start".
9. Close out of Services and try your print again.
When you get to your response, please include which version of Windows you're running please.
Which Windows Operating System am I running?
Thank you,
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

6020 won`t connect through Irda

Similar Messages

Maybe you are looking for