6021 and pcsuite in vista

Hi,
Does the pcsuite connection work reasonably reliably with the 6021 and Vista (with latest pcsuite)? I do not need to use the "synch" feature, just want to access SMS messages, contacts and calender via pcsuite. I might buy a 6021 used.
Thanks

I send these enhancements for iTunes today. But I sent those enhancements for QuickTime since I look the overview of "RUNNING QUICKTIME ON VISTA" and I tried it. Once these enhancement feedbacks has been sent to Apple. They should fix it and not to be ignored. I want to see the new look of iTunes and QuickTime UI Running Windows Vista.

Similar Messages

PC Suite 6.8.22.0, 6021 and repeated connection re...

Hello
Has a 6310i with old version of Pc Suite. Worked fine!
Upgraded phnoe to 6021 and downloaded new version of PC Suite - 6.8.22.0. When PC starts and Bluetooth enabled on my phone, I get repeated requests to "connect with my computer".
This didn't happen with previous software. Anyone else had this and how can this be stopped?
TIA
BarkingMad

Hi
ekendraed, I'm not sure about your problem but see this (and try it):
/discussions/board/message?board.id=pcsuite&message.id=11480
barkingmad: Does all PC Suite applications working ok?
anyway, you can set your PC to trusted via phone's BT UI (after that you don't need to accept that connection open request anymore)

Can I use my 2TB WD My Book Essential for the Time Machine feature on the MacBook as well as two other Windows computers (one running 7 and one with Vista)?

Can I use my 2TB WD My Book Essential for the Time Machine feature on the MacBook as well as to store information from two other Windows computers (one running 7 and one with Vista)?

Yes you can but you need to partition the drive into at least 2 separate drives.
To do that you need to use a Windows PC to do the first partitioning. Say you split the drive into two partitions each 1TB (or close to 1TB) each.
Partition fand format both partitions on a Win PC as one NTFS and the other FAT32.
Then move it to the Mac and Reformat the FAT32 partition Mac Extended (Journaled) with a GUID Partition Table.
I have that same drive and that is what I did originally with it. I now have it just for the Mac as I have other externals for the Win systems.
Good Luck.

I wanted to install windows for Mac and I had vista so I put I the disk and installed it then it loses my computer wen I turned it on it went straight to windows and it asked me to install it and put in the windows box code I found out I didn't have Ma.

I wanted to install windows for Mac and I had vista so I put I the disk and installed followed the steps it then it closed my computer wen I turned it on it went straight to windows and it asked me to install it and put in the windows box code I found out I didn't have it so I wanted to go back to Mac I shut it off and it just goes back to windows and asks me to put the box code how do I get rid of it and go back to Mac because no buttons work at the start and i can't take out the disk !! Help

The two other posts are correct... so I'll just clarify. What's happening right now is your system is trying to boot into Windows in order to finish the installation. What you want to do is make it boot into OS X. As mende1 indicated, with your system off, hold down the Option key and continue to hold it while you turn the system on. You will eventually be presented with an option to select which partition you would like to boot from. Choose OS X. After you get into OS X, again, as mende1 indicated, change the Startup Disk to OS X. What this will do is cause your system to automatically boot into OS X when you restart it instead of you having to use the Option key when booting each time.
Relaunching BootCamp Assistant will allow you to remove your Windows installation and partition.

I changed laptops and went from Vista to Windows 8. It requires icloud. I did icloud setup but it will not allow me access and wants to give me a new password. That is OK but it will not send me the promised password

I changed laptops and went from Vista to Windows 8. It requires icloud. I did icloud setup but it will not allow me access and wants to give me a new password. That is OK but it will not send me the promised password even though itunes recognizes my password

This has been posted for almost 2 weeks and not one reply. Thanks a bunch! As a newbie to OOo and Mozilla, I am not impressed with responsiveness to support needs with either. So, the future of my new experiment with going non-Microsoft remains an open question.
Oddly enough, the problem mysteriously went away. I have followed the same routine and changed no settings. Suddenly all of the downloaded spreadsheets were no longer read-only. So I consider the matter resolved.

I am trying to install Adobe Reader my wife's laptop but "installer" hangs up and fails with a blank black screen. The machine is capable and has a Vista OS. My wife blames the machine and wants to "throw it out." She's an idiot but I need to get this fix

I am trying to install Adobe Reader my wife's laptop but "installer" hangs up and fails with a blank black screen. The machine is capable and has a Vista OS. My wife blames the machine and wants to "throw it out." She's an idiot but I need to get this fixed.

run the cleaner (Download Adobe Reader and Acrobat Cleaner Tool - Adobe Labs) and then retry installing.

I have a Mac, IPad, I phones, and 2 Windows Vista Pcs and I'm having trouble with the Windows Laptop staying connected. I have to re-boot after and extended period of time please help

I have a Mac, IPad, I phones, and 2 Windows Vista Pcs and I'm having trouble with the Windows Laptop staying connected. I have to re-boot after an extended period of time please help. Thanks!

I have a Mac, IPad, I phones, and 2 Windows Vista Pcs and I'm having trouble with the Windows Laptop staying connected. I have to re-boot after an extended period of time please help. Thanks!

I have a windows XP computer and a windows Vista computer...

I have a windows XP computer and a windows Vista computer that are dropping the wireless connections every so often. They both stay connected for a period of time, and then they drop the connection. I need help with this problem as soon as possible.

It's important to know more about it...
Does these computers worked together without problems before?
How they are configured?
If you connect both using cable the problem occurs?
[]s
Message Edited by brn on 08-09-2007 10:33 AM

I have samsung corby gts3653 mobile and need to connect internet to mac through it but it doesn't have wifi and pcsuite for mac and how could i able to connect it through gprs? GPRS is active in mobile but unable to link it with macbook pro(using lion os)

i have samsung corby gts3653 mobile and need to connect internet to mac through it but it doesn't have wifi and pcsuite for mac and how could i able to connect it, through gprs? GPRS is active in mobile but unable to link it with macbook pro(using lion os) can any one reply.

Until the MacBook Air was released and supported in 10.5, the Mac did not consider USB to be a valid Networking Protocol. So set the Mac with USB solutions aside.
To connect computer-to-computer, you typically need to be using an Ethernet crossover cable. Assigning the same address to two Ethernet devices is never the solution -- it gives a Network Conflict, just as you said.
If your Windows box has some mechanism for Sharing its WiFi connection over Ethernet, you would have to follow its rules. Whether that means Manually assigning an Ethernet Address in the same range or the PC will provide the Address, I do not know.
Best success may be running an Ethernet cable to your Wired/Wireless Base Station, or using a "gaming adapter" (Ethernet-to-Wireless no drivers required) connected to the Mac's Ethernet port to give it WiFi access. What is your Base Station {Cable, DSL, FIOS, Other} ? Ethernet cables can be up to 100 meters (an American Football Field). Often the Base Station can be moved closer for more convenience.

6021 and Plantronics 640 Bluetooth not working

I try using 'Search for audio enhancements' AND the 'Pair new device' options to try and connect my 6021 and the Plantronics 640 Bluetooth headset and neither work.
According to a site the headset and phone are compatible.
Any help would be much appreciated.
EDIT: Removed link to shop. SerenityMessage Edited by serenity on 23-Aug-2006
10:58 AM

Macaby wrote:
However, this Lamborghini problem is almost sure to be a hardware problem (either cabling or something in the car's audio system.) Regardless, there is almost zero chance that another Lamborghini owner will step up to the plate here and help resolve the issue. Come on, how many Lamborghinis are out there? I've NEVER seen one on the street or on the planet.
I've seen two of them, but none for at least 15 years. I did see a Tesla two months ago, quite an amazing sighting.
There was an earlier post, more of a rant, telling folks that if they have a luxury car (believe the poster had a Jag) don't get an iPhone 3GS; that thread was expunged, I imagine due to its tone. But it appears all the problems posted here do relate to high end cars or specific earphones. My visor mounted BlueAnt Supertooth 3 has made the 2G to 3GS transition just fine .. and I'm sure the lack of any cable connection to the phone is one reason why.
Phil

6230i and PCsuite connects momentarily then discon...

Ok I have posted this as reply elsewhere, but had no response so I am starting a new thread in the hope that someone wiser than myself will see this and offer some help.
So, Im yet another of the gazillion PCsuite users who is suffering from this issue:
PCSuite6.84.10.3 connects bluetooth momentarily before disconnecting from my 6230i.
Ive read through many many threads, and cannot find a consistent response which resolves this issue. PLEASE SOMEONE let me know the fix or where I can find it before I upgrade to a SonyErikson!I had my phone stolen and trying to get my contacts back onto my new phone with ZERO success.
How can so many suffer from this same issue and not a word of advice or at least apology from Nokia!! And if its not fixable please let me know so I can stop wasting my time and simply upgrade to a compatible phone.
Anyway, enough rant. Thanks for your help in advance
copic
PS
I tried
Start -> Run -> services.msc, right-click on Bluetooth Service, hit Start.
it was already active, and repair made no difference.
so thats not it
PPS
service info:
Operating system:
Microsoft Windows XP
Build 2600
Service Pack 2
Language: English
Language for non-Unicode programs: English
Locale: English
Input language: English
Nokia PC Suite:
Version 6.84.10.3
Language: English
Connectivity Cable Drivers:
Version 6.84.4.0
PC Connectivity Solution:
Version 7.22.7.1
Bluetooth stacks:
WIDCOMM Bluetooth stack
Version 3.0.1
Build 803
Microsoft Bluetooth stack
Version 5.1.2600
Build 2180
...............anyone?

ok, so spoke to Nokia (moody support), who also suggested the problem may be with WIDCOMM stack, then also spoke to DELL support (as always amazingly helpful).
So yes I have unistalled WIDCOMM and my PC automatically activated Microsoft BT stack. AND WADDYAKNOW it WORKS! Brilliant! I have succesfully updated my contacts, havent tried anything else. But that is all I care about. Thankyou for your help and advice.
Interestingly when I had the same problem a year ago, DELL suggested I updated and reinstall WIDCOMM BT. WHich I did, and for a while this resolved the issue. Now it seems that MICROSOFT BT stack resolves the issue. Go figure.
Perhaps this is to do with the current versions of firmware and PCsuite?
Anyway just happy to have contacts sorted. thanks again.
copic

Sychronising 6300 and Windows Calendar (Vista Home...

Help please - I have previously been able to sychronise my calendar on my Nokia 6300 and my previous laptop (which used Windows XP) with no problems at all. I have had to buy a new computer and this runs Vista (Home Premium edition).
I have downloaded the appropriate Nokia suite but I still cannot sychronise the calendar on my phone with Windows Calendar. When installing Nokia Suite it did not 'find' the windows Calendar.
Can anyone out there help please, what am I missing? Thanks

You mean use windows calendar with an oracle calendar server back-end ? 99% chance this is a no-go.

Problem with Java and Windows (Mainly Vista and UAC)

Hi all,
I am having a problem with a program that I've devoloped. The program itself is packaged as a jar and I plan to deploy it across multiple platforms eventually however right now i am only concerned about windows based systems. I have made an installer for a windows baised systems using NSIS to install the software files. I made the installer as I need several java packages to be installed so the program would work (JAI, J3D, JAI ImageIO) and I also require the program to have fileassociations on windows.
I know that this is not what java is about, however the majority of the users will be on windows baised systems so I've decided that OS specific installers is the best option.
During the process I have noticed that there are several key problem with java for this type of application!
The first issue that I have come across is getting file associations to work on java. As a .jar is not an excutable it is not possible to directly associate a filetype with it in java so to overcome this I currently run the program from a .bat files and also the program requires large memory so this also allows me to run the program with -xmx. The batch file that I use is :
<code>
cd PATH TO PROGRAM
start javaw -Dsun.java2d.noddraw=true -Xmn100M -Xms500M -Xmx1000M -jar "PATH TO PROGRAM\program.jar" %1 -vram 134217728
pause;
</code>
Ok so all this appears to work fine and allows windows to have file associations and start the program and thats all works perfectly but this is a non-ideal solution. Has anyone got any advice on improving this?
The next problem that I have appears to be a problem with Vista and UAC (user access control). When a user installs the program and installs the program into the program files directory I found that the program did not work and kept saying that I did not have access to the files in the current directory. This is a problem as I read and write settings files during program execution.
On a Vista system UAC prevents file write operations into the Program Files directory unless the program has requested elevated status even if the user is a full administrator. The probem is that there appears to be no real way to achieve this under java that I'm aware of...
Has anyone else had this probem and has a suitable solution?
Any advice on these issues would realy be appricated.
Regards
Joey

Ok so i've kinda found a solution, its not ideal but its very good. I found this program called Elevate
A link to the site I got it was
http://www.wintellect.com/cs/blogs/jrobbins/archive/2007/03/27/elevate-a-process-at-the-command-line-in-vista.aspx
This program allows you start java with a UAC dialog for high access using
Elevate java -jar myjar.jar
This then allows you to have full access using java... I guess it could be dangerous but it does the job.

Drive format for Mac and PC running Vista?

I teach in a Mac lab and have students who have PC's at home. In the past, I advised them to reformat their portable HD as FAT 32. Now, based on communication from one student and research I have done online, it seems that Vista cannot read a FAT 32 partition.
Is this true?
If so, is there another format that can be used on both Mac OSX v. 10.5 and Vista?

Is this true?
No. Vista can't boot from FAT32 drives, but can read and write them.
(47153)

Guide for installing and tuning a Vista 64 PC

Yes, I'm going to tax your patience again. This is a guide to setup Vista 64 for NLE work, well it actually applies to any kind of work, but NLE machines may profit more than an Office/MSN machine. One caveat: What I suggest here is a lean and mean machine that is mainly dedicated to NLE work.
First: It is always best to start with a clean install and a complete reformat of the disk. That will ensure that your registry is clean and leaves no leftovers from a previous install. Do not partition the drive, format the whole disk as one.
After installation has completed, first select Control Panel and Personalize. Select Change Desktop icons and ensure that at least Computer is selected. You can choose other icons as well if you want to. I have all 5 selected.
Next check Device Manager (right click This Computer, select Properties and then Device Manager) that you have no problems with drivers for any of your hardware. If there are any yellow exclamation symbols, solve these issues first by having Vista search for drivers and if it comes back with the message that no drivers could be found, get the latest 64 bit driver from the internet for this device.
Once Device Manager has no more problems, go to Windows update and install all critical updates. Nothing more at this moment. After installation and rebooting, again check Device Manager for problems. There should be none. Otherwise get on the internet again and reinstall the latest Vista 64 drivers. Next right chick This Computer and select Manage and go to Event Viewer. Open the Windows Logs and click on System. Scroll through the events and check out any errors or warnings you see. Search the Microsoft Technet for solutions. This is the link to the very informative Technet site to help you solve any issues you may have: Microsoft Technet
Next go to Control Panel, select Programs and Features and select turn Windows features on or off. You may not need anymore than these Windows Features and possibly less, for instance if you don't use a network printer. Also this may be a good moment to turn off User Account Control via Control Panel/Security Settings.
Next go to Vista Services and use the instructions and the table shown to modify the services, so only those are started that are needed in your situation. Anything not needed will only increase boot time and will consume resources, placing a higher overhead on the system than needed.
After rebooting, update all your drivers if you have not already done so. For instance, if you have an ATI card, download the latest drivers, but remember you can do without the Catalyst Control Center. Their drivers are typically denoted by y.m (year, month) so currently the latest is version 9.5
Now go to Control Panel, System and select Advanced system settings, select Visual Effects and select Adjust for best performance, apply and then select the Advanced tab, click on Performance settings, select the Advanced tab, Select Adjust for best performance of programs and then change the Virtual memory. Setup your pagefile with a custom size with equal numbers for Initial and Maximum size on another drive than your C disk and set the C drive to No paging file. If you have read my Storage rules for an editing rig guide, you know you need a fixed size of around 1 to 1.5 times installed memory, unless you have lots of RAM, then you can easily go lower.
Reboot and right click on This Computer, select Manage and select Disk Management. Select drive C, right click Properties and make sure that Index this drive for faster searching and Compress this drive to save disk space are both turned off. Click Disk Cleanup and clean what can be deleted. Repeat these steps for all of your drives. Next go to the Tools tab and select Defragment Now and defrag all drives. While you are at the Disk Defragment window, setup a daily defragging schedule, for instance during your lunch break. That will keep your disks optimized.
This will make sure that the space previously occupied by the pagefile on the C drive is reclaimed and that the new pagefile on another drive is not fragmented and at the very beginning of the drive in the fastest location (at least if the disk was newly formatted and not used).
If you haven't done so yet, completely turn off the Sidebar and do not have it autostart.
No application has been installed yet, so it is time to start with some essential utilities.
The first thing I do is turning off Windows Defender and install Symantec Endpoint Protection.
Next I install Ccleaner. A very handy freeware tool to keep your system and the registry clean and to remove or disable registry based auto startup programs.
The next one to install is the Sysinternals Suite and most notably Process Explorer, Process Monitor and Autoruns. Depending on your use, other utilities in the Suite may be nice to install as well. Installation is done by extracting the relevant files to the C:\Windows directory. Run Process Explorer once and in the Options menu select Replace Task Manager.
Other utilities I install (but of course you may have different favorites) are Beyond Compare, HWMonitor, SpeedFan, SnagIt and 1ClickPCFix
You are now ready to install your regular software. After installation, registration and activation of all your software use Ccleaner, Tools to check for unnecessary Startup entries in the registry. Disable or remove them. Next check your registry by scanning for issues and fix selected issues. Defragment all your disks again and make a restore point.
If you want to get rid of the ridiculously large shortcut arrow at this moment, go to this site: Remove Shortcut Arrow and follow Method 1.
Reboot and you are ready to go with a hopefully much faster and efficient Vista machine.
If you encounter difficulties and have problems that want to ask about on the forum, be prepared to include a screenshot from Process Explorer and either HWMonitor or Speedfan and a link to DXDIAG.txt
Thanks for your patience and I hope you have found some tips and tricks to improve performance.

Quoted from Harm's original post:
"First: It is always best to start with a clean install and a complete reformat of the disk. That will ensure that your registry is clean and leaves no leftovers from a previous install. Do not partition the drive, format the whole disk as one."
I guess I started off on the wrong foot. I just restored my computer to factory condition, which includes a partitioned "Factory Image" which enabled me to restore the machine. Should I be concerned with this? The system drive is actually a 2-drive RAID 0 from factory.
Could I have done this differently?

6021 and pcsuite in vista

Similar Messages

Maybe you are looking for