6034 runtime error

I tried to install the iTunes update today. Now iTunes will not start. I tried reinstalling and I am getting a 6034 runtime error, something about C runtime library. How do I fix this? Windows Vista.

Hi fixmefromnc,
Thanks for visiting Apple Support Communities.
To resolve this error, I recommend completely removing and reinstalling iTunes and its related components using these steps:
Check for .dll files
Go to C:\Program Files (x86)\iTunes and C:\Program Files\iTunes and look for .dll files.
If you find QTMovie.DLL, or any other .dll files, move them to the desktop.
Reboot your computer.
Note: Depending on your operating system, you may only have one of the listed paths.
Uninstall and reinstall iTunes
Uninstall iTunes and all of its related components.
Reboot your computer. If you can't uninstall a piece of Apple software, try using the Microsoft Program Install and Uninstall Utility.
Re-download and reinstall iTunes 11.1.4.
You can find the article with these steps and more information here:
iTunes 11.1.4 for Windows: Unable to install or open
http://support.apple.com/kb/TS5376
Best,
Jeremy

Similar Messages

HELP RUNTIME ERROR 6034 Just IS pointless to re-download Itunes.

I have gone over this problem with many others on so many sites. The same MESSAGE..... Runtime error! Program c:\ program files (x 86) R 6034 applacation had made an attempt to load the C RUNTIME LIBARY INNCORRECTLY! CONTACT THE APPS.SUPPORT TEAM FOR MORE INFORMATION!!!!
This Is just CRAZY.I was Not having ANY problems at all until I updated it,I am not sure but I just know That all my music and apps,and movies I have on here for myself and my daughter are just wasting away.I downl;oaded I tunes on a different computer..WITH NO PROBLEMS BUT ALL MY FILES ARE ON THIS COMPUTER so MY IPOD TOUCH CANT AND WILL NOT HAVE ANYTHING OMN IT and I HAVE ALOT OF MEMORY ,SO I NOW AM FORCED TO COPY ALL MY FILES AND TRY TO DOWNLOAD ON THE OTHER COMPUTER which Is Not mine,this Is just a Big problem.
I have Not Fond anything I have done wrong,I have tried to make sure i did everything correctly but it seems that I just cant dowload ITUNES.I NEED SOMEONE TO PLEASE HELP ME! I am at the point to just STOP DEALING WITH APPLE PERIOD ,I just keep having problems its really sad because My daughter adores her games and Now Its upseting her and its ******* me OFF...PLEASE 'SOMEONE JUST HELP ME FIGURE OUT WHATS GOING ON.I DID THE Run and type in all the required Things that one blog said to do yet ITS STILL FAILED! SORRY TO KEEP ON ,ITS JUST REALLY SICK TO HAVE SUCH A PROBLEM LIKE THIS WHEN YOU CANT FIGURE IT OUT! UGH...HEELP

have you tried:
iTunes 11.1.4 for Windows: Unable to install or open
Troubleshooting issues with iTunes for Windows updates

Runtime Error 6034

Are you going to fix this or not ? Runtime Error 6034 .
Best regards
<Email Edited By Host>

First try updating to iTunes 11.1.5.5, using an installer downloaded from the Apple website:
http://www.apple.com/itunes/download/
If you still get the errors after that, try the following user tip:
Troubleshooting issues with iTunes for Windows updates

Can Apple resolve Runtime Error 6034 or do I chuck it

I give up with iTunes - you download their recommended update and then you can't access iTunes, because you receive "Runtime Error 6034" messages - I'm not going to purchhase any more musice from iTunes unles THEY resolve the problem - why should I pay some outside "expert" to resolve it??
Totally disatisfied customer - no more revenue from me!!

You have two choices as far as the Apple Store. First you can call Apple Care to make sure that they will give you a new device to contact Apple Care its 1-800-MY-APPLE. Or for your local Apple Store, you will have to make an appointment online if you do not want to call Apple Care (Apple Care may ship you a new iPhone 4 or make an appointment for you but if you choose not to call here is the link) - http://www.apple.com/retail/
Apple Store will A- Resolve the issue or B- Replace the iPhone 4! Just make sure to make an appointment

J'ai accepté la mise à jour de Itunes. A présent s'affiche en permanence "runtime error 6034" . Que faire? J'ai vu sur la toile que je ne suis pas le seul.

J'ai accepté la mise à jour de Itunes proposée. A présent s'affiche en permanence "runtime error 6034". Que faire?
PC vista.

You need to follow the instructions of tt2 in: https://discussions.apple.com/thread/5822086

ITunes 11.1.4 update failure. Runtime Error 6034

I have had a complete nightmare today following an attempt to update iTunes 11.1.38 to 11.1.4 on my PC running Windows 7 Home Premium.
These are the errors I encountered
During installation the following messages were displayed ..
Service 'Apple Mobile Device' (Apple Mobile Device) failed to start. Verify you have sufficient provileges to start system services.
Whether I clicked Retry or Ignore, this message still appeared.
Clicking Abort triggered a further message ...
The Installer encountered errors before iTunes could be configured. Errors occurred during the Installation. Your system has not been modified.    Please run the installer again or click Finish to Exit
Temporary relief, thinking that iTunes had been rolled back to the previous settings of version 11.1.38
Running the installer again had exactly the same result.
iTunes then failed to launch
An attempt at launching the program triggered the following Error
Runtime Error R6034    An application has made an attempt to load the C Runtime library incorrectly. Please contact Application support team for more information.
This is when I turned to this Forum for help and found the following advice in various posts which have solved the problem Follow the steps in this article to completely remove iTunes from your PC   http://support.apple.com/kb/HT1923
If, like me, you are unable to uninstall Apple Mobile Device Support Check this thread and follow the advice given by b_noir in the 4th post down, which is to download and run this tool http://support.microsoft.com/mats/Program_Install_and_Uninstall    It takes its time so be patient, it did fix it for me.
Reboot.
Re Install iTunes I chose to stick with version 11.1.38, which I knew worked.
This worked for me, I hope it helps

THE ABOVE or    http://support.apple.com/kb/TS5376    WORKS AND IT IS FROM APPLE
Basically it instructs you with a link to get a MS (MicrosoftFixit) software tool that wipes the registry, so you can do a clean install.
Follow the instructions and it should be fine.
I don't know why Apple is not putting this on the front page of itunes.com. Of course they should post a new itunes that does not muck your 'puter, but I think if you tried already it is too late unless you fix what they effed.

I have difficulty installing itune update 11.1.4 i get runtime error 6034 error 7 windows error 1114 pls help

i have difficulty installing i tune update 11.1.4 got this runtime error R6034 and i tune did'nt install correctly Error 7 error 1114 messages.

Solving the iTunes Installation Problems in Windows
1. Apple has posted their solution here: iTunes 11.1.4 for Windows- Unable to install or open - MSVCR80 issue.
2. If the Apple article does not fully resolve the problem for you, then try Troubleshooting issues with iTunes for Windows updates - MSVCR80.

When installing the recommended update, I received the following message: Runtime error R6034 followed by the message: Error 7 (Windows error 1114). Now I cannot access ITunes at all.

How do I fix Runtime error R 6034 and Error 7 (Windows error 1114)?

See Troubleshooting issues with iTunes for Windows updates.
tt2

Runtime Error R6034 visual C++ library

This Program C:\ Program file (X86) R 6034 Microsoft Visual C++ Runtime Library error keeps coming up when I start up my computer, Note I am running Windows 7 How do I fix this? Thank you.

Hi,
A runtime error is a software or hardware problem that prevents a program from working correctly. Runtime errors might cause you to lose information in the file you're working on, cause errors in the file (corrupt the file) so you can't work with it, or
prevent you from using a feature. Unlike stop errors, runtime errors don't typically cause Windows or a program to stop working.
1. I would suggest you to try the steps from the following link:
http://windows.microsoft.com/en-US/windows7/What-is-a-runtime-error
2. I would suggest you to run SFC scan. SFC scan will scans all protected system files and replaces incorrect versions with correct Microsoft versions.
How to use the System File Checker tool to troubleshoot missing or corrupted system files on Windows Vista or on Windows 7
http://support.microsoft.com/kb/929833
3. I would like to suggest you boot in Clean Boot Mode to check the issue.
How to perform a clean boot to troubleshoot a problem in Windows 8, Windows 7, or Windows Vista
http://support.microsoft.com/kb/929135
If the issue disappears in the Clean Boot environment, we can use a 50/50 approach to quickly narrow down which entry is causing the issue.
Meanwhile, you may refer to the links below to check the issue:
C Run-Time Error R6034
http://msdn.microsoft.com/en-us/library/ms235560(v=vs.90).aspx
Hope it helps.
Regards,
Blair Deng
Blair Deng
TechNet Community Support

Runtime error in starting Lightroom

I receive the following message when I try to start Lightroom:
Microsoft Visual C++ Runtime Library
Runtime Error!
Program:...Files\Adobe\Adobe Photoshop Lightroom 1.2\lightroom.exe
This application has requested the Runtime to terminate it in an unusual way.
Please contact the application's support team for more information.
Lightroom ran well for several days and then failed to open with the above message.
I have tried everything I know to do (uninstalled and reinstalled the application, restored the computer to a restore point before Lightroom was originally installed, etc.) and do not know were to go from here. Suggestions would be appreciated.
I am using Windows XP sp2 and have 4 GB of ram and 250 GB of hard disk space.
Thanks,
Cliff Culp

Aha! A fix! Please look at this...
http://www.adobeforums.com/cgi-bin
bob frost, "Help! Runtime error after Lightroom 1.1 install!" #10, 27 Jun 2007 6:54 am

Runtime error while executing rule

Hello All,
While executing the DTP for a cube, im facing the error as Runtime error while executing rule -> see long text .
For this source is another Cube, where im loading the data from Cube to Cube.
Error Description are as follows:-
Error Location: Object Type    TRFN
Error Location: Object Name    0T9SCR6Q4VWS1SOPNRRBOY1YD51XJ7PX
Error Location: Operation Type ROUTINE
Error Location: Operation Name
Error Location: Operation ID   00034 0000
Error Severity                 100
Original Record: Segment       0001
Original Record: Number        557
and Also descripton is :-
Diagnosis
    An error occurred while executing a transformation rule:
    The exact error message is:
    Division by zero
    The error was triggered at the following point in the program
    GP4H0CW3MLPOTR3E8Y93QZT2YHA 4476
System Response
    Processing the data record has been terminated.
Procedure
The following additional information is included in the higher-level
node of the monitor:
   Transformation ID
   Data record number of the source record
   Number and name of the rule which produced the error
Let me know ur valuable suggestions on these error...
thanks.

Hello,
I have checked all the transformation and End Routines.All are working fine.Yesterday i have loaded some data into it, but today its gettting errored out.
Checked completely in the forum for threads related to this, but couldnt find proper thread which had solutions....
thanks,
srinivas.

Could someone help me with a Runtime Error while saving a PDF file?

While saving a 28 page PDF file in Illustrator today, I got a window saying, "This application has requested the "Runtime" to terminate it in a unusual way." It said to contact the applications support team for more information. I keep getting the same thing each time I try it. Does anyone know how to fix this issue or how I contact the applications support team ?
Thank you for any insight.
Pam

It is a 13.5x11 inch calendar. There are 14 pages with images on them and
some text. The other pages have text, a grid and a colored background with a
gaussian blur. I saved each page as an "outline".
The printer I am using requested I save all pages in a pdf file. I was
successful in saving all but about six pages, now I can't even open the
file.
What happens is... I open Illustrator
                               I open the pdf file
                               A window appears that says... Runtime Error,
This application has requested the Runtime to terminate it in an unusual
way. Please contact the application's support team for more information.
                               I select ok
                               then a window appears that says... Adobe
Illustrator CS5 has stopped working. A problem caused the program to stop
working correctly. Windows will close the program and notify you if a
solution is available.
                               Then the program closes.
So far I have not been notified of anything.
Please let me know if you need more details.
Thank you so much for helping me with this.
Pam

RunTime Error while saving a Sales Order

Hi All,
When i am saving a Sales Order, the system is throwing a Runtime Error.
The ABAP Code in the Runtime Error screen as follows.
          select * from (t681-kotab) appending table <cond_tab>
                 up to 1 rows
                 where kappl = se_kappl
                 and   kschl = se_kschl
                 and   datbi >= se_date
                 and   datab <= se_date
                 and   (coding_tab).
Till these days, there was no such error while saving a Sales Order.
How to resolve this issue?
Regards
Pavan

Hi,
The below piece of code is trying to get the contents of the table mentioned in T681-KOTAB.
select * from (t681-kotab) appending table <cond_tab>
up to 1 rows
where kappl = se_kappl
and kschl = se_kschl
and datbi >= se_date
and datab <= se_date
and (coding_tab).
The reason could be is someone has screwed up the entries in T681 table. Check that out.
Try to put a break point on this SELECT query and see what the value of T681-KOTAB holds before the SELECT query. Check whether such a table entry exists in DB.
Let me know if you are still stuck up.
If you can send me the ST22 dump of the run time error, i might be able to help you more on this.
Hope this helps.
Thanks,
Balaji

WHILE DELETING A SALE ORDER GETTING A RUNTIME ERROR

hi to all experts,
whenever i try to delete a particular sale order im getting a runtime error
stating that
Short text
    Screen: Illegal message
What happened?
    The current screen processing action was terminated since a situat
    occurred where the application could not continue.
    This is probably due to an error in the ABAP program or in the cur
    screen.
Error analysis
    The program attempted to issue a " " message during "Exit Command" processing.
    This is an illegal operation.
    The program was terminated.
    Screen name.............. "SAPMV45A"
    Screen number............ 4001
Trigger Location of Runtime Error
    Program                                 SAPMV45A
    Include                                 MV45AFZZ
    Row                                     370
    Module type                             (FORM)
    Module Name                             USEREXIT_SAVE_DOCUMENT
SourceCde
              message e001(zm) WITH text-335 ltab-kunnr text-334.
            else.
              if ktab-jkunnr <> ltab-kunnr.
                ktab-jkunnr = ltab-kunnr.
                jobsitecode = ltab-kunnr.
                CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
                EXPORTING
                  input = jobsitecode
                  IMPORTING
                  output = jobsitecode.
                SELECT SINGLE * FROM kna1 WHERE kunnr = jobsitecode.
                IF sy-subrc = 0.
                  ktab-jname1 = kna1-name1.
                  ktab-jstras = kna1-stras.
                ENDIF.
                chg_flg = 'X'.
              endif.
            endif.
          else.
            message e001(zm) WITH text-336.
* Validation for relationship between Sold-to Party and Ship-to Party
*          if ktab-ckunnr+0(4) NE ktab-jkunnr+0(4).
*            message e001(zm) WITH text-335 ktab-jkunnr text-337 ktab-ckunnr.
*          endif.
          custcode1 = ktab-ckunnr.
          CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
            EXPORTING
              input = custcode1
            IMPORTING
              output = custcode1.
          jobsitecode1 = ktab-jkunnr.
          CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
            EXPORTING
              input = jobsitecode1
            IMPORTING
              output = jobsitecode1.
          SELECT SINGLE * FROM knvp
          WHERE kunnr = custcode1
            AND vkorg = vbak-vkorg
            AND vtweg = vbak-vtweg
            AND spart = vbak-spart
            AND parvw = 'WE'
Error analysis
    The program attempted to issue a " " message during "Exit Command"
    This is an illegal operation.
    The program was terminated.
    Screen name.............. "SAPMV45A"
    Screen number............ 4001
Trigger Location of Runtime Error
    Program                                 SAPMV45A
    Include                                 MV45AFZZ
    Row                                     370
    Module type                             (FORM)
    Module Name                             USEREXIT_SAVE_DOCUMENT

Hi,
Seems there is some problem with the user exit USEREXIT_SAVE_DOCUMENT..
Put a breakpoint and see.
Regards,
Nagaraj

WHILE DELETING A SALE ORDER GETTING A RUNTIME ERROR " Screen: Illegal message"

Hi Experts,
While deleting a sales order giving run time error. PFB runtime error details.
If you know any OSS message, please let m know. I tried, but there is no luck.
Short text
    Screen: Illegal message
What happened?
    The current screen processing action was terminated since a situation
    occurred where the application could not continue.
    This is probably due to an error in the ABAP program or in the current
    screen.
What can you do?
    Note which actions and input led to the error.
    For further help in handling the problem, contact your SAP administrator.
    You can use the ABAP dump analysis transaction ST22 to view and manage
    termination messages, in particular for long term reference.
Error analysis
    The program attempted to issue a " " message during "Exit Command" processing.
    This is an illegal operation.
    The program was terminated.
    Screen name.............. "SAPMV45A"
    Screen number............ 4001
How to correct the error
    The program must be modified to correct the error.
    The modification must be made in "Exit Command" processing.
    If you cannot solve the problem yourself and want to send an error
    notification to SAP, include the following information:
    1. The description of the current problem (short dump)
       To save the description, choose "System->List->Save->Local File
    (Unconverted)".
    2. Corresponding system log
       Display the system log by calling transaction SM21.
       Restrict the time interval to 10 minutes before and five minutes
    after the short dump. Then choose "System->List->Save->Local File
    (Unconverted)".
Source Code Extract
Line SourceCde
    1 *---------------------------------------------------------------------*
    2 *       FORM YVBEP_LESEN                                              *
    3 *---------------------------------------------------------------------*
    4 *       Lesen der Tabelle YVBEP (nicht sortiert)                      *
    5 *---------------------------------------------------------------------*
    6 FORM YVBEP_LESEN USING US_POSNR
    7                        US_ETENR
    8               CHANGING CH_TABIX.
    9
   10   YVBEP = SPACE.
   11   YVBEP-MANDT = VBAK-MANDT.
   12   YVBEP-VBELN = VBAK-VBELN.
   13   YVBEP-POSNR = US_POSNR.
   14   YVBEP-ETENR = US_ETENR.
   15   READ TABLE YVBEP.
   16   IF SY-SUBRC > 0.
   17     MESSAGE E506 WITH US_POSNR US_ETENR.
   18   ENDIF.
>>>>>   CH_TABIX = SY-TABIX.
   20
   21 ENDFORM.
Could you please help on this issue.
Thanks
Srinu

Hi Srinu,
it looks like you got the error message Schedule line &1 &2 is missing in table YVBEP while deleting the sales order.
It seems, that there are no SAP notes regarding this issue. Do you have this issue with all orders or with a single order?
If only a single order causes this issue, maybe something was wrong during an update.
If you get this error for many orders, then custom code (modification, enhancement, user exit in MV45AFZZ, ...) may be the reason for it.
If you have no custom code in module pool SAPMV45A, then contact SAP for this issue.
Regards,
Klaus

6034 runtime error

Similar Messages

Maybe you are looking for