6085 restarts during data transfer

I've just got a new 6085, and cannot copy data to it, either by cable connection or Bluetooth, from another phone or via Windoze. I can only get the first 50 - 90 contacts to copy to the phone, then the phone re-starts & the copy stops. I have it set to delete all.
At first I only tried using PC Suite, but then I found the same error occurs when doing a Bluetooth transfer from my E70 to this phone.
Maybe the phone is faulty in some way? I've tried to update the phone firmware, but it says it's already up to date.
Any ideas, anyone?

Maybe.The best thing to do is that,bring it to the nearest Nokia care centre.
CheeRiOS!!!!!!!

Similar Messages

Error during data transfer from Lotus Notes to SAP via JCO - Urgent Help Required

Dear SAP Expert:
I need your help! Recently getting error during data transfer to SAP. I need your suggestion!
I am transferring Lotus Notes data to SAP via JCO, recently getting the below error msg, could you pls tell me what could be the reason?
Please suggest me how to fix that kind of issue.
"com.sap.mw.jco.JCO$Exception: (104) RFC_ERROR_SYSTEM_FAILURE: Error in ABAP/4 statement when processing an internal table. table.
at com.sap.mw.jco.rfc.MiddlewareRFC$Client.nativeExecute(Native Method)
at com.sap.mw.jco.rfc.MiddlewareRFC$Client.execute(MiddlewareRFC.java:1244)
at com.sap.mw.jco.JCO$Client.execute(JCO.java:3842)
at com.sap.mw.jco.JCO$Client.execute(JCO.java:3287)
at SAPAdapter.execute(Unknown Source)
at JavaAgent.fillBapiAndWriteBackToNotes(Unknown Source)
at JavaAgent.NotesMain(Unknown Source)
at lotus.domino.AgentBase.runNotes(Unknown Source)
at lotus.domino.NotesThread.run(NotesThread.java:249)
Thanks in advance! Your help would be highly appreciated! Thanks again!

error is clear, check your abap code.

Time Capsule only runs with 1,1Mbit up/down during data transfer, internet speed is ok, TC is used to extend an existing network

Hello Everyone,
I have a new 2TB Time Capsule running with a MacBook Air. I want to use the TC to access data (Aperture library, iTunes library, other Files) and to backup my MacBook Air via Time Machine. I set it up, integrated the TC in my Network (FritzBox) by choosing "extend existing network" and it works. BUT only with 1.1Mbit/second while writing or reading Data to/from it. Internet speed is very good, like it was before. While the 1.1Mbit/second seem to be ok with Aperture and iTunes (streaming music and movies) it is still painfully slow and I'm not realy happy with that
I've read that:
The 1.1Mbit problem is pretty common when Time Capsule is integrated and used to extend a network (bridge modus), it also looses all ethernet connectivity then (that woul explain why connecting it by ethernet didn't help during initial setup and data transfer)
Is there a solution besides ditching the Fritzbox and using the TC to build the network? Because basicly I still need the Fritzbox for its DECT features.
Thank you for any help in advance and have a nice day,
Olli

You have double hop wireless with this setup..
You should bridge the TC.. that is router bridge not wireless bridge, and plug the TC into the Frizyboy by ethernet.
Then you can setup the TC wireless to reinforce the fritzy..
Same wireless name as SSID.
Same security settings... really should be WPA2 AES or in TC personal.
Same password..
Just different wireless channel.
Then you can use 5ghz on the TC if you are up close and personal.

[Solved]Computer slow down and freeze during data transfer syncing

Hello,
Everytime I make a data transfer, my computer slow down, and sometimes freeze during a few seconds, work for a fraction of seconds and freeze again. I don"t understand why.
As an example, here is a bench of files i transfered during a syncing with Grsync
It took about 12h to sync 64Gb.
I've read a lot of topics talking about this problem but nothing works. I tried to switch off the SWAP and setting the vm.dirty_ratio and vm.background_dirty_ratio but nothing works.
I'm making the trasfer between two Western Digital USB 2.0 external hard drive in NTFS.
Does anyone know how to fix this?
Thanks in advance
Last edited by Neldar (2015-03-04 15:54:29)

It seems it was beacause one of my external hard drive was about to die. I performed the same operation with 2 Western Digital external hard drive 1To USB3 and it works perfectly.

HT4796 Frozen mac during data transfer

My data transfer seems to have froze in the middle of it and I can't figure out how to cancel it on the new mac and start over. This is the first thing I have done on the new computer so I can't log-out or anything. Thanks!

You shouldn't use Migration Assistant to set up a new Mac. You should use Setup Assistant, which launched automatically the first time you started up. Did that happen?

Message 'can only work in client 001 during data transfer

Hello Experts,
Recently I setup a interface between ECC and SCM system for EWM, my data transfer was working fine until last couple of days when I getting this error message on the SCM side.
Message in CFM2 comes up as
Function/Q/SAPAPO/CIF_LOC_INBOUND
Text: You can only work in client 001
And not sure why because I have not made any changes to settings.
Can someone please suggest what might be going wrong and what needs to be done?
Thanks
Bhaskar

Hi Bhaskar,
I have not worked on EWM, and don't know if CIF connectivity is used differently.
But let me try to propose a general way forward based on your error message.
It seems that your CIF data is trying to reach a client where you are not authorized to work, or where CIF settings are not maintained properly.
Should be linked to RFC connectivity between R/3 and APO (unless it's due to some SAP bug).
Check out the following:
1) Which APO client is your CIF model pointing to? You would most likely be able to find this out by seeing the name of "logical system" for your CIF Integration Model (IM). It seems the CIF IM is pointing to some client which is something other than client 001.
Also, my guess would be that this client that you maintained in CIF IM is no longer having settings relevant for CIF, or something else.
2) Go to your APO system, and again cross-check which client you are using. Next go to /n/sapapo/cq and see which R/3 systems are having active connections to your APO system. The "logical system" corresponding to your R/3 system/client should be there in the list. if not, ask your Basis team if they made any changes recently.
PS: I would assume that you should get this same error for CIF of any object, not only material (unless the corresponding IM points to a different client in APO).
Let me know the results of your checks, and if this helps you in finding out the root cause.
PS: Logical system normally would have a naming convention like <System name>CL<Client>. e.g. PR1CL310. Here PR1 is system name and client is 310.
Thanks - Pawan

Handling Network failure during data transfer from ECC to PI

Hi,
We have created a custom program in ECC to push invoice header information to PI using the proxy call.
We're able to successfully now push these data to PI without any issues.
However, there is a comment from client like if there is an unexpected error such as system or network failure during transferring data from ECC to PI, then how is it being handled from ECC side?
I'm left with no answers. I know the messages will be stucked in SMQ2 or SMQ1 but we need to find out how can resend those data to PI in case of such failures. Documents in ECC are either posted or parked or payment totally based on real time process and based on each ECC event such as parked or posted or reveresed, we are sending one message to PI respectively. But how can we resend these invoices incase of an unexpected error?
If we go with an ad hoc process, how do we implement this process for each document which is being created or rejected.
Thanks,
Shamim

Hi,
The queue will automatically restart if the problem was connection issue. In case of system failure you need to check and start them manually.
check http://help.sap.com/saphelp_nw04/helpdata/en/f3/df5f3cb0decb09e10000000a114084/content.htm
To check for any problems you can use CCMS monitoring.
check http://help.sap.com/saphelp_470/helpdata/en/52/12f73b7803b009e10000000a114084/content.htm
Hope this will help you.
Regards
Vinit

[Satellite Pro A200] - slowness during data transfer and heat problems.

Hi folks.
I have a 1.5 y.o Toshiba Satellite Pro A200 with standard 200GB HDD. Since some time its behaviour is just... weird.
Sometimes system slows. It just behaves sluggish, it frequently freezes for a second during simple tasks such as entering the text. It;s more frequent during intensive data transfers (such as copying files through FTP from my LAN or copying from pendrive) but sometimes it happens even when no other app than the Firefox is working. It's not that apparent, so I wonder - will service take it under warranty conditions (which means - is there a probability that they'll say that everything is perfect and charge me for this?)
The computer was on the warranty repair once, they replaced HDD with other one. Is it possible that the other one has some troubles as well (S.M.A.R.T. check discovers nothing). Or maybe it's faulty SATA controller?
Other thing is the temperature. During normal work (Internet, MS Word) both cores works at 60*C. When gaming the temperature can rise above 90*C and the computer sometimes shuts down. I assume that the problem is the dust accumulated inside the laptop but I can't see how can I clean it up.
Would you go to the service with such problems?

Virus scanners can slow a system down considerably, what Virus Scanner are you using?
If you have many programs installed, maybe its time to backup your data and reinstall Windows. I do it myself every year since Windows tends to get bloated and slow after a while.
As for the dust, you can blow it out using a Can of compressed Air sprayed through the main air vent (while the system is off).
Or if the dust buildup is really bad, you may need to send it to an Authorised Service Provider to get it dismantled and cleaned up.

Deployment '2700002' to target 'tar152' encountered a system level deployment error during data transfer.

Hi All,
I got this error in atg bcc on UI and console as well when i doing full deployment.
I triyed through snap-shot id but i think this is different issue.
So please tell me where is problem happend.
Thanks in Advance.
--Kakasaheb.

Are you working with a customer with a support contract?
Cause
One potential cause is corrupted data in the epub_file_folder table in the versioned schema and examining the table contents is necessary. This data may be the result of a deployment containing VFS assets that did not complete successfully
The BCC application assumes that the virtual folder structure contained in epub_file_folder is built upon a single root folder. This folder has the name 'root' and has a NULL parent_folder. If another folder in this table has a NULL parent_folder, then the application does not know which is the true root folder. As a result, based purely on chance, the BCC will choose one of them as the root folder of the VersionFileStore (VFS). Depending on which assets are contained beneath that folder, some file assets may not appear correctly in the BCC UI. Another symptom is the inability to deploy any project, including a full deployment.
To check for this particular corruption, perform the following SQL query.
select * from epub_file_folder order by parent_folder;
Putting the table data in a spreadsheet makes it easier to sort the data on various columns for analysis.
If you sort by parent_folder check for data similar to that shown in the following table. Note that there are two folders whose parent_folder is NULL. Here are the relevant columns from epub_file_folder:
folder_id
folder_name
parent_folder
asset_version
is_head
version_deleted
version_editable
ff102063
CorruptFolder
NULL
1
1
0
0
root
root
NULL
1
1
0
0
Solution
Note: Exercise caution when directly modifying the versioned database schema. For assistance identifying this problem and implementing the solution, please open an SR with Oracle Support.
1. Analyze Versioned Folder Data
How you resolve this corruption will depend on whether or not you need to retain the corrupt folder. Examine whether the folder has an asset version that is checked in, marked as deleted, or marked as the head version. If there is no checked-in version with is_head=true, then this indicates the folder may have been part of a failed deployment.
Trace through the hierarchy of folders underneath the corrupt folder. Determine whether there are any folders or files within that hierarchy that you need to retain. In some cases, it may be a single folder created unintentionally by a BCC user. In other cases, there may be more significant folder structure underneath it that is needed by the front-end application.
2a. Corrupt Folder Not Needed
If you do not need the corrupt folder, set its version_deleted=1.
This will mark the folder as Deleted in the versioned repository. As far as the BCC is concerned, neither it nor anything under it will exist and will not appear in the BCC UI. The data will still be retained in the database, though.
2b. Corrupt Folder Needs Correct Parent
If you do need the corrupt folder, determine the true parent folder. Set its parent_folder to the ID of the actual parent.
See the folder_id column for the correct parent folder and substitute that ID for NULL in BadFolder's parent_folder.
3. Restart BCC and Re-Test
After modifying the data for the corrupt folder, restart the BCC so that the repository picks up all the changes.
++++
Thanks
Gareth
Please mark any update as "Correct Answer" or "Helpful Answer" if that update helps/answers your question, so that others can identify the Correct/helpful update between many updates.

Error 8 during data transfer from PSA - Cube

Hello,
when I want to load data from PSA to Cube I get "error 8 in update".
I already had error 7 oder error 4 in the past, but what does this error 8 mean and how can I solve it?
Thanks in advance

The reason is this
that if you try to load data records to the cube which is already archived. Please note that until the archives are not reloaded
back, the same interval cannot be loaded.
workaround in case of semantic lock is
is to reload the data from archive -> semantic lock disappears -> load/update the data -> archive data again.

What is the best way to shut down an iMac that has frozen during a data transfer? The disk I was writing to will not eject. Stopping "copy items to" doesn't work either_ it is frozen as well. Is there a way to force eject the disk so I can shut down?

Some more information on the above: OS: 7.2
1. None of the shutdown commands would work so I held the power button down and received a prompt that asked if I wished to force eject the drive, I selected
the force eject and then shut down.
2. Just recently I installed an eSATA _ Thunderbolt_ port multiplier compliant PCIe card (Seritek Q6G) into a thunderbolt external chassis (OWC Helios) (seritek Q6G).
This freeze data transfer also happened when I connected a Firmtek 5PM external tower to the iMac via thunderbolt cable.
The driver for the seritek Q6G was installed in the iMac previous to connection of any of the devices.
Both external towers mount ok on the iMac but have frozen during data transfer.
The initial freeze was with the Firmtek 5PM which is (JBOD)_ I thought that might have had something to do with the freeze_ it being JBOD_ so next I tried the Mercury Elite AL Pro Q2- which is formated in RAID 5. But then froze too.
Anybody have any experience with this?
Maybe I need another driver?
Or maybe some update to my OS?
Any suggestions welcomed.
Thank you

Hello BDAqua, thanx for the suggestions. Before I saw this reply I tried to first quit the finder and then to relaunch the Finder but that resulted was a blank gray screen.
In the end I ended up having to power down the iMac.
Fortunately the RAID array that was "active" seems to be fine and also has a firewire 800 connection so I can use it_ just not with thunderbolt until this issue is solved.
I'm going to check in the Applications>Utilities>system log to see if any clues are evident_ thank you for the suggestion.
PS: Nothing of note was obvious as a root cause in the Activity Monitor though.
hmmm....I was told that the Helios and seritek card were compatable and that the Helios didn't require any drivers..it will be a drag if there isn't an easy fix for this since this new PCIe card from seritek is the first to offer port multiplier compatibility for eSATA to thunderbolt...since they are both new I'm hoping that an OS upgrade will be the fix (presently7.2)...we shall see.

Data Transfer Issue from R/3 Prod to BW Prd

Hello All,
We have recently connected our BW PRD system to R/3 PRD system.
During data transfer its giving an Message " Error Opening an RFC Connection"
So we have to go to the Transact RFC mode & Forcefully transfer the data.
we have given below profiles to the ALEREMOTE & BIWREMOTE users in R/3 & BW
SAP_ALL, SAP_NEW, S_BI-WHM_RFC, S_BI-WX_RFC, S_RS_ALL
Any thing is missing, please let us know
Regards
Lalan

Hi,
If you are using SAP R/3 Plug-In 2004.1
For BIWREMOTE profile S_BI-WHM_RFC (Business Information Warehouse, RFC user in the Warehouse) is sufficient to extract the data.
For ALEREMOTE profile SAP_ALL covers all authorizations.
Check following configurations for both systems
RFC connections
ALE settings
Partner profiles
Port
IDoc types
IDoc segments
BW settings
All the above configuration is fine, still you are facing same problem check the OSS note: 150315
Regards,
RC

Rec - data transfer

Hi
While transferrring data from recrutiment to PA, i want only those infotypes which are updated by user in recruitment to be transferred to PA(apart from the mandatory infotypes). I am using operation MOD still the IT updated in recrutiment does not pop up during data transfer.
Please help me in this regard
Regards
Minal

Thanks Nicole for your inputs.
Need to confirm some more unsderstanding
- where is master data of E rec stored? and is thr any storage period to be define for the data.
I understand that attachements are stored in DMS and we can define the storage period for the same but what ant the object data, activity record data, etc...
Ext cand is attached to CP to BP but where are these stored ECC or whr?
- Regarding integration aspect I was told that PSA will be mapped with location in E rec, Ed fields in PA will be available in E erc is it correct? I have to take requirement for each object from client eg.-functional area list, industrry etc..so do I need to consider any PA integration data which will be available in e rec and jst need to add the list...
- When job posting is viewed by external candidate does it hit ECC for details?
- How to consider Virus scan for documents attached..
Regards

How to debug a transfer rule during data load?

I am conducting a flat file (excel sheet saved as a CSV file) data load. The flat file contains a date field and the value is '12/18/1988'. In transfer rule for this field, I use a function call to transfer this value to '19881218' which corresponds to BW DATS format, but the monitor of the InfoPackage shows red error:
"Value '1981218' of characteristic 0DATE is not a number with 000008 spaces".
Somehow, the last digit or character of the year 1988 was cut and the year grabbed is 198 other than 1988. The function code is (see below in between two * lines):
FUNCTION ZDM_CONVERT_DATE.
""Local Interface:
*" IMPORTING
*"     REFERENCE(CHARDATE) TYPE STRING
*" EXPORTING
*"     REFERENCE(DATE) TYPE D
DATA:
c_date(2) TYPE c,
c_month(2) TYPE c,
c_year(4) TYPE c,
c_date_combined(8) TYPE c.
data: text(10).
text = chardate.
search text for '/'.
if sy-fdpos = 1.
concatenate '0' text into text.
endif.
c_month = text(2).
c_date = text+3(2).
c_year = text+6(4).
CONCATENATE c_year c_month c_date INTO c_date_combined.
date = c_date_combined.
ENDFUNCTION.
Could experts here tell me what's wrong and also tell me on how to debug a transfer rule during data load?
Thanks

hey Bhanu/AHP,
I find the reason. Originally, I set the character length for the date InfoObject ZCHARDAT1 to 9, then I find the date field value (12/18/1988)length is 10. Then I modified the InfoObject ZCHARDAT1 length from 9 to 10 and activated it already. But when defining the transfer rule for this field, before the code screen, click the radio button "Selected Fields" and pick the filed /BIC/ZCHARDAT1, then continue to go to the transfer rule code screen, but find the declaration lines for the infoObject /BIC/ZCHARDAT1 is as following:
InfoObject ZCHARDAT1: CHAR - 000009
    /BIC/ZCHARDAT1(000009) TYPE C,
That means even if I've modified the length to 10 for the InfoObject and activated it, but somehow the transfer rule code screen always takes the old length 9. Any idea to have it fixed to take the length 10 in the transfer rule code screen defination?
Thanks

Issues with data transfer / connectivity

Hi,
I bought a Curve 8320 last week and activated BIS. The issue that I am facing is:
- Mails do not get delivered and connectivity to the internet is lost even though the data signal (EDGE) is available. I can see an upload arrow flashing on the right top corner
- What I have noticed is that the connectivity gets resumed when I do any of the following:
a. Switch on WiFi (immediately the data connection starts receiving and sending messages and internet connectivity is resumed). Even after switching off the WiFi, it works fine
b. Switch off the device and restart
Can someone help me? Please let me know if you need any more details.
Thanks

You can try using FExplorer and using it to delete the file C:\system\shareddata\101ff93b.ini from the phone. It should reset the Data Transfer app.
FExplorer you can find here:
http://www.gosymbian.com

6085 restarts during data transfer

Similar Messages

Maybe you are looking for