610 Database Location Policy Not Configured
I'm getting this error starting the inventory service. Policies are
configured as is search policies. What else am I'm missing to get this up
and running?
Jpaluch,
It appears that in the past few days you have not received a response to your posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Do a search of our knowledgebase at http://support.novell.com/search/kb_index.jsp
- Check all of the other support tools and options available at http://support.novell.com in both the "free product support" and "paid product support" drop down boxes.
- You could also try posting your message again. Make sure it is posted in the correct newsgroup. (http://support.novell.com/forums)
If this is a reply to a duplicate posting, please ignore and accept our apologies and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://support.novell.com/forums/
Similar Messages
-
Error 610 Database location policy is not configured.
Hello,
I'm running ZENworks 6.5 sp1(a).**I*have*an*Inventory*Service*object **called
"Inventory Service_servername".**Should*I*be*renaming*t his*to*the*older
configuration (which I don't have anymore) or try to configure it as is.
startinv no longer will start inventory.**I*had*this*working*since*the
upgrade (a long time ago) but it's no longer working.**I*had*checked*a
number of the TID's on this error but I have not been able to resolve the
problem.**Please*tell*me*where*I*should*be gin*to*look.
Thanks in advance, OksanaIt's now fixed. Looks like it was configured both in the Server Package and
the Service Location Policy, so I removed the settings from the Server
Package, and voila it works!
Oksana wrote:
> With debugging increased:
>
> 12/9/05 12:55:55.537] ZENInv - Server Config: getAttributes of DB Loc.
> Policy returned: 104
> [12/9/05 12:55:55.537] ZENInv - Server Config: DB Location Policy not
> configured properly...
> [12/9/05 12:55:55.537] ZENInv - Server Config: The
> getConfigurationFromDirectory() returned610
> [12/9/05 12:55:55.639] ZENInv - Server Config: Inv Server not configured
> properly. Error code: 610
> [12/9/05 12:55:55.639] ZENInv - Server Config: Error Type 15 Error 610
>
> and later on
>
> [12/9/05 12:55:55.927] ZENInv - Status Reporting: Number of modified
> [records
> are: 0 for DN=CN=Inventory Service_BOREALIS.OU=ARDELT.O=FACS
> [12/9/05 12:55:55.927] ZENInv - Server Config: Error Type 15 Error 610
> [12/9/05 12:55:55.927] ZENInv - Server Config: clearScope() return value 1
>
>
> The db location is specified, so I'm not sure what the problem is, maybe
> the
> correct rights to acces the db aren't in place. Everything else seems to
> be working.
>
> TIA, Oksana
>
> Marcus Breiden wrote:
>
>> On Fri, 02 Dec 2005 16:30:27 GMT, Oksana wrote:
>>
>>> We installed sp1 before sp1a came out and I fixed it and it has been
>>> working
>>> since. However, recently it is not working and I'm not sure why.
>>
>> in that case I would enable debug logging for inventory and take a look
>> at the log file..
>>
>> Try enable debugging....
>>
>> http://www.novell.com/documentation/...rts/zdprts.pdf -
610 error... Database location Policy not found
I realize that this item is not new to this forum and I have tried all the solutions from here and in any TID's I could find. The configuration looks correct. The only thing I can identify is that it stopped working at the same time that I updated the NW6 server with edir873 and jvm141. I have since then applied the patch to edir and jvm142sp3. Is there a resolution that anyone knows of.
Walter,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Do a search of our knowledgebase at http://support.novell.com/search/kb_index.jsp
- Check all of the other support tools and options available at
http://support.novell.com in both the "free product support" and "paid product support"
drop down boxes.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://support.novell.com/forums)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://support.novell.com/forums/faq_general.html
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://support.novell.com/forums/ -
Software Updates Failing - Group Policy Overwritten - Server and Policy NOT CONFIGURED
I have seen a few posts about this issue and group policy overwriting the settings needed by SCCM with the wrong WSUS server. I checked the wuahandlerlog and found this error but it didnt have the server information.
"Group policy settings were overwritten by a higher authority (Domain Controller) to: Server and Policy NOT CONFIGURED"
The only coputer policy that applies to this system does not have WSUS entries in it. Windows update runs ok, and I deleted the WSUS registry keys that were set by a script and reinstall the client still getting the same error. I dont see any GPO local or domain, or reg keys that are setting anything. I have 10 other servers is the same AD container that this is working perfecly on.......
Suggestions????Check out this GPO:
Computer Configuration -> Administrative Templates -> System -> Group Policy:
"Turn off Local Group Policy Objects processing"
The help text:
"This policy setting prevents Local Group Policy Objects (Local GPOs) from being applied.
By default, the policy settings in Local GPOs are applied before any domain-based GPO policy settings. These policy settings can apply to both users and the local computer. You can disable the processing and application of all Local GPOs to ensure that only
domain-based GPOs are applied.
If you enable this policy setting, the system does not process and apply any Local GPOs.
If you disable or do not configure this policy setting, Local GPOs continue to be applied.
Note: For computers joined to a domain, it is strongly recommended that you only configure this policy setting in domain-based GPOs. This policy setting will be ignored on computers that are joined to a workgroup."
Rolf Lidvall, Swedish Radio (Ltd) -
Error message when Database details are not configured properly
Hi,
I am using JDeveloper 11.1.1.1.4 and ADF-BC in my project.
I use Weblogic Data Source connection to connect to Database.
I have a requirement that when data base details are not configured properly in Weblogic Data Source or when Database is down,I need to display an error message either when I access application task flows or in login page itself when application starts.
Can I achieve this???Please advice.
Regards,
PraveenPraveen,
Check out Steve's example
https://blogs.oracle.com/smuenchadf/resource/examples#129
-Arun -
610 Database Not Configured Error?
Hello,
We have had Zen 7 installed for quite a while and now are looking to get
some information from the inventory. Of course, now that we are wanting to
use it we have noticed that it hasn't ever been working completely as we
are getting the "610: The Database Location policy is not configured."
error. I have checked and double-checked the Service Location Policy and
the Server Package. Both have the Zenworks Inventory database configured
to the inventory database object for the server.
What else should I be checking?
Timothy M. Musa
Community Consolidated School District 93
Carol Stream, IL
http://www.ccsd93.com/Tim Musa <musat_@_ccsd93.com> wrote in
news:[email protected]:
> Hello,
>
> We have had Zen 7 installed for quite a while and now are looking to
> get some information from the inventory. Of course, now that we are
> wanting to use it we have noticed that it hasn't ever been working
> completely as we are getting the "610: The Database Location policy is
> not configured." error. I have checked and double-checked the Service
> Location Policy and the Server Package. Both have the Zenworks
> Inventory database configured to the inventory database object for the
> server.
>
> What else should I be checking?
>
Well, after poking around a bit more, I cleared the associations for the
policy and the package and re-associated them and the inventory server has
started.
Timothy M. Musa
Community Consolidated School District 93
Carol Stream, IL
http://www.ccsd93.com/ -
CR10 Dev JRC ReportSDKException Report location is not specified in the configuration file error
I'm trying to embed a simple report into a j2ee application running under BEA WebLogic(without
workshop)
using the standalone Java Reporting Component (JRC), but I'm getting the exception
shown below (along with my config and source).
I'm just wondering at the cause of the exception, because I can successfully deploy
this code to jboss.
I've tried moving the CrystalReportEngine-config.xml file everywhere, from the
/WEB-INF/classes/ folder
to the /WEB-INF/ folder to the /WEB-INF/lib/ folder.
I consulted the product documentation on the JRC and its tutorials but it has
me stumped.
I went through the BEA WebLogic Workshop tutorial, which worked for some reason,
but I'm looking to do all the coding manually without any of BEA's controls and
what not.
Any information would be GREATELY APPRECIATED!!!
Thanks,
-Colin
com.crystaldecisions.sdk.occa.report.lib.ReportSDKException: Report location is
not specified in the configuration file---- Error code:-2147
215356 Error code name:fileNotOpened
at com.crystaldecisions.sdk.occa.report.lib.ReportSDKException.throwReportSDKException(Unknown
Source)
at com.crystaldecisions.reports.reportengineinterface.JPEReportSource.<init>(Unknown
Source)
at com.crystaldecisions.reports.reportengineinterface.JPEReportSource.a(Unknown
Source)
at com.crystaldecisions.reports.reportengineinterface.JPEReportSourceFactory.createReportSource(Unknown
Source)
at com.crystaldecisions.report.web.viewer.ReportAgentBase.case(Unknown
Source)
at com.crystaldecisions.report.web.viewer.ReportServerControl.getReportSource(Unknown
Source)
at com.crystaldecisions.report.web.viewer.taglib.ReportServerControlTag.int(Unknown
Source)
at com.crystaldecisions.report.web.viewer.taglib.ReportServerControlTag.doEndTag(Unknown
Source)
at jsp_servlet.__viewreport._jspService(__viewreport.java:197)
at weblogic.servlet.jsp.JspBase.service(JspBase.java:33)
at weblogic.servlet.internal.ServletStubImpl$ServletInvocationAction.run(ServletStubImpl.java:971)
at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:402)
at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:446)
at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:305)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:6350)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:317)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:118)
at weblogic.servlet.internal.WebAppServletContext.invokeServlet(WebAppServletContext.java:3635)
at weblogic.servlet.internal.ServletRequestImpl.execute(ServletRequestImpl.java:2585)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:197)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:170)
My EAR file structure is as follows:
/crystal/ (context)
/reports/qtrade_sp_listing.rpt
/crystalreportviewers10/ -- bunch of crystal viewing stuff
/WEB-INF/classes/CrystalReportEngine-config.xml
/WEB-INF/lib/ -- bunch of crystal jar files
My CrystalReportEngine-config.xml is as follows
<?xml version="1.0" encoding="utf-8"?>
<CrystalReportEngine-configuration>
<reportlocation>../..</reportlocation>
<timeout>10</timeout>
<keycode>A2960-01C00FA-U700063</keycode>
</CrystalReportEngine-configuration>
My relevant Web.xml looks like:
<web-app>
<context-param>
<param-name>crystal_image_uri</param-name>
<param-value>/crystal/crystalreportviewers10/</param-value>
</context-param>
<taglib>
<taglib-uri>/crystal-tags-reportviewer.tld</taglib-uri>
<taglib-location>/WEB-INF/crystal-tags-reportviewer.tld</taglib-location>
</taglib>
</web-app>
My JSP Page Source:
<%@ page language="java" contentType="text/html;charset=UTF-8"%>
<%@ taglib uri="/crystal-tags-reportviewer.tld" prefix="crviewer"%>
<html>
<head>
<title>Web Application Page</title>
</head>
<body>
<crviewer:viewer
viewerName="SPListingReport"
reportSourceVar="_SPListingReport"
displayGroupTree="false"
displayToolbarToggleTreeButton="false"
reportSourceType="reportingComponent">
<crviewer:report reportName="reports/qtrade_sp_listing.rpt"></crviewer:report>
</crviewer:viewer>
</body>
</html>I'm trying to embed a simple report into a j2ee application running under BEA WebLogic(without
workshop)
using the standalone Java Reporting Component (JRC), but I'm getting the exception
shown below (along with my config and source).
I'm just wondering at the cause of the exception, because I can successfully deploy
this code to jboss.
I've tried moving the CrystalReportEngine-config.xml file everywhere, from the
/WEB-INF/classes/ folder
to the /WEB-INF/ folder to the /WEB-INF/lib/ folder.
I consulted the product documentation on the JRC and its tutorials but it has
me stumped.
I went through the BEA WebLogic Workshop tutorial, which worked for some reason,
but I'm looking to do all the coding manually without any of BEA's controls and
what not.
Any information would be GREATELY APPRECIATED!!!
Thanks,
-Colin
com.crystaldecisions.sdk.occa.report.lib.ReportSDKException: Report location is
not specified in the configuration file---- Error code:-2147
215356 Error code name:fileNotOpened
at com.crystaldecisions.sdk.occa.report.lib.ReportSDKException.throwReportSDKException(Unknown
Source)
at com.crystaldecisions.reports.reportengineinterface.JPEReportSource.<init>(Unknown
Source)
at com.crystaldecisions.reports.reportengineinterface.JPEReportSource.a(Unknown
Source)
at com.crystaldecisions.reports.reportengineinterface.JPEReportSourceFactory.createReportSource(Unknown
Source)
at com.crystaldecisions.report.web.viewer.ReportAgentBase.case(Unknown
Source)
at com.crystaldecisions.report.web.viewer.ReportServerControl.getReportSource(Unknown
Source)
at com.crystaldecisions.report.web.viewer.taglib.ReportServerControlTag.int(Unknown
Source)
at com.crystaldecisions.report.web.viewer.taglib.ReportServerControlTag.doEndTag(Unknown
Source)
at jsp_servlet.__viewreport._jspService(__viewreport.java:197)
at weblogic.servlet.jsp.JspBase.service(JspBase.java:33)
at weblogic.servlet.internal.ServletStubImpl$ServletInvocationAction.run(ServletStubImpl.java:971)
at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:402)
at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:446)
at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:305)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:6350)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:317)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:118)
at weblogic.servlet.internal.WebAppServletContext.invokeServlet(WebAppServletContext.java:3635)
at weblogic.servlet.internal.ServletRequestImpl.execute(ServletRequestImpl.java:2585)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:197)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:170)
My EAR file structure is as follows:
/crystal/ (context)
/reports/qtrade_sp_listing.rpt
/crystalreportviewers10/ -- bunch of crystal viewing stuff
/WEB-INF/classes/CrystalReportEngine-config.xml
/WEB-INF/lib/ -- bunch of crystal jar files
My CrystalReportEngine-config.xml is as follows
<?xml version="1.0" encoding="utf-8"?>
<CrystalReportEngine-configuration>
<reportlocation>../..</reportlocation>
<timeout>10</timeout>
<keycode>A2960-01C00FA-U700063</keycode>
</CrystalReportEngine-configuration>
My relevant Web.xml looks like:
<web-app>
<context-param>
<param-name>crystal_image_uri</param-name>
<param-value>/crystal/crystalreportviewers10/</param-value>
</context-param>
<taglib>
<taglib-uri>/crystal-tags-reportviewer.tld</taglib-uri>
<taglib-location>/WEB-INF/crystal-tags-reportviewer.tld</taglib-location>
</taglib>
</web-app>
My JSP Page Source:
<%@ page language="java" contentType="text/html;charset=UTF-8"%>
<%@ taglib uri="/crystal-tags-reportviewer.tld" prefix="crviewer"%>
<html>
<head>
<title>Web Application Page</title>
</head>
<body>
<crviewer:viewer
viewerName="SPListingReport"
reportSourceVar="_SPListingReport"
displayGroupTree="false"
displayToolbarToggleTreeButton="false"
reportSourceType="reportingComponent">
<crviewer:report reportName="reports/qtrade_sp_listing.rpt"></crviewer:report>
</crviewer:viewer>
</body>
</html> -
Standby Database Location not listed
We have the primary database created and the primary database, server, and agent and the standby server and agent are listed in grid control targets. but when I go to create a new standby database, the standby server is not listed for selection in the list of servers to select for Standby Database Location.
The agent on the server appears to be running and uploading fine.
Windows 2003 server SP2
Oracle 10.2.0.3 on Primary
Oracle 10.2.0.2 repository
Grid Control 10.1.0.4We don't have a standby database because the server isn't listed in the list of Standby Database Locations to choose from. We are trying to create the standby database.
We've tried to Discover the standby server but it seems to already be Discovered because it is listed as a target when all targets are displayed (target type of host).
It's almost like the grid control sees the server but for some reason feels it's inelligible to be a standby server. -
Couldn't not configure Database in Grid Control...
Hi,
they work at the operating system level but the Database instance will not ever come to configure I always get this error
The emctl upload works fine
oracle.sysman.emSDK.emd.comm.CommException: Cannot establish proxy connection: 502 Proxy Error ( The specified Secure Sockets Layer (SSL) port is not allowed. ISA Server is not configured to allow SSL requests from this port. Most Web browsers use port 443 for SSL requests. )
Thanks,2008-06-05 15:43:48 Thread-1 DEBUG TargetManager: call nmedt_waitDynPropertyFinish for <hostname>
2008-06-05 15:43:48 Thread-9 DEBUG TargetManager: Computing dynamic properties for {<hostname>, host}
2008-06-05 15:43:48 Thread-9 DEBUG TargetManager: Computing dynamic property from_cluster of host,<hostname>
2008-06-05 15:43:48 Thread-9 WARN TargetManager: Query returned 0 rows (only one expected) for the dynamic property from_clu
ster
2008-06-05 15:43:48 Thread-9 DEBUG TargetManager: Computing dynamic property getCRSVCategory of host,<hostanme>
2008-06-05 15:43:48 Thread-9 DEBUG TargetManager: Computing dynamic property Config of host,<hostname>
2008-06-05 15:43:48 Thread-9 DEBUG TargetManager: Computing dynamic property esa_dyn_prop of host,<hostname>
2008-06-05 15:43:48 Thread-9 DEBUG TargetManager: Done with dynamic property evaluation for {<hostname>,host}
2008-06-05 15:43:48 Thread-1 DEBUG TargetManager: nmedt_waitDynPropertyFinish for <hostname>, ret=0
2008-06-05 15:43:48 Thread-1 ERROR TargetManager: Skipping target {test, oracle_database}: Missing properties - password
2008-06-05 15:43:48 Thread-1 ERROR TargetManager: Skipping target {dev, oracle_database}: Missing properties - password
2008-06-05 15:43:48 Thread-1 DEBUG TargetManager: call nmedt_waitDynPropertyFinish for LISTENER_<hostname>
2008-06-05 15:43:48 Thread-10 DEBUG TargetManager: Computing dynamic properties for {LISTENER_<hostname>, orac
le_listener}
2008-06-05 15:43:48 Thread-10 DEBUG TargetManager: Computing dynamic property esaMaxRowCount of oracle_listener,LISTENER_<hostbane>
2008-06-05 15:43:48 Thread-10 DEBUG TargetManager: Done with dynamic property evaluation for {LISTENER_<hostname>,oracle_listener}
2008-06-05 15:43:48 Thread-1 DEBUG TargetManager: nmedt_waitDynPropertyFinish for LISTENER_<hostname>, ret=0
2008-06-05 15:43:48 Thread-1 ERROR TargetManager: Skipping target {test, oracle_database}: Missing properties - password
2008-06-05 15:43:48 Thread-1 INFO TargetManager: save to targets.xml success
2008-06-05 15:43:48 Thread-1 WARN TargetManager: Regenerating all Metadata
2008-06-05 15:44:26 Thread-1 DEBUG TargetManager: In getTypeAndNameForHostTarget
2008-06-05 15:44:26 Thread-1 DEBUG TargetManager: getTypeAndNameForHostTarget found host, <hostname>
2008-06-05 15:44:26 Thread-1 DEBUG TargetManager: In getTypeAndNameForHostTarget
2008-06-05 15:44:26 Thread-1 DEBUG TargetManager: getTypeAndNameForHostTarget found host, <hostname>
2008-06-05 15:44:26 Thread-1 DEBUG TargetManager: In getTypeAndNameForHostTarget
2008-06-05 15:44:26 Thread-1 DEBUG TargetManager: getTypeAndNameForHostTarget found host, <hostname>
2008-06-05 15:44:26 Thread-1 DEBUG TargetManager: In getTypeAndNameForHostTarget
2008-06-05 15:44:26 Thread-1 DEBUG TargetManager: getTypeAndNameForHostTarget found host, <hostname>
2008-06-05 15:44:26 Thread-1 DEBUG TargetManager: In getTypeAndNameForHostTarget
2008-06-05 15:44:26 Thread-1 DEBUG TargetManager: getTypeAndNameForHostTarget found host, <hostname>
2008-06-05 15:44:26 Thread-1 DEBUG TargetManager: In getTypeAndNameForHostTarget
2008-06-05 15:44:26 Thread-1 DEBUG TargetManager: getTypeAndNameForHostTarget found host, <hostname>
2008-06-05 15:44:26 Thread-1 INFO TargetManager: TargetManager initialized
2008-06-05 15:44:26 Thread-1 DEBUG TargetManager: In getTypeAndNameForHostTarget
2008-06-05 15:44:26 Thread-1 DEBUG TargetManager: getTypeAndNameForHostTarget found host, <hostname>
2008-06-05 15:44:26 Thread-1 WARN collector: Regenerating all DefaultColls
2008-06-05 15:44:31 Thread-1 INFO TargetManager: save to targets.xml success
2008-06-05 15:44:32 Thread-41 ERROR upload: Error in uploadXMLFiles. Trying again in 60.00 seconds or earlier. -
Not working. Change database location trough VB 6
Hi,
I just finished two reports in Crystal 10 using an Access Database (database location and query are hardcoded in the reports.
I made a small vb 6 application to launch the reports. Now I need to change database location for the reports trough VB 6. I have the following code, but it is not working. The reports do not show any data and I do not get any error. I think the problem is with the hardcoded query. The report is designed on this query and the field reference on the reports are like Command.Field1
I just want tho change database location in VB, but I want the report take the query that is in it.
I have the following code. How can I make them work.? Is there a better way to do it?
Dim Report As New CR2 'set up the report
Dim conn3 As New ADODB.Connection 'ADO connection
Dim rs As New ADODB.Recordset 'rs connection
Function F_ViewReport()
'On Error GoTo End_FormLoad
Dim sSQL2 As String
gsRootJob = "4850"
Dim sSQL2 As String
gsRootJob = "4850"
"SELECT Material.Job, Material.Indicator, PO_Detail.Order, Source.Act_Qty, Vendor.Name, PO_Header.PO, PO_Detail.Due_Date FROM (((Material LEFT JOIN Source ON Material.Material_Req = Source.Material_Req) LEFT JOIN PO_Detail ON Source.PO_Detail = PO_Detail.PO_Detail) LEFT JOIN PO_Header ON PO_Detail.PO = PO_Header.PO) LEFT JOIN Vendor ON PO_Header.Vendor = Vendor.Vendor WHERE (((Material.Job) Like '" & gsRootJob & "*')) ORDER BY Material.Job, PO_Header.PO, PO_Detail.Line;"
Report.DiscardSavedData
Set conn3 = New ADODB.Connection
conn3.Open "provider=Microsoft.jet.OLEDB.4.0; Data Source=" & App.Path & "\Data tables.mdb"
Set rs = New ADODB.Recordset
rs.Open sSQL2, conn3, adOpenKeyset, adLockReadOnly
Report.Database.SetDataSource rs, , 1
CRViewer2.ReportSource = Report
CRViewer2.DisplayTabs = False
CRViewer2.ViewReport
CRViewer2.Zoom 1
Screen.MousePointer = vbHourglass
Please help!
ccHi Cris,
It seems that you are having issue with SDK's.
Post your question in SDK forum.
[SAP Crystal Reports, version for Visual Studio;
You can download samples from here:
[https://www.sdn.sap.com/irj/boc/samples]
That forum is monitored by qualified technicians and you will get a faster response there. Also, all SDK queries remain in one place and thus can be easily searched in one place.
Thank you for your understanding,
Regards,
Shweta -
EM console HA page says "Data Gaurd not configured for this database"
I am attempting to use EM console's "High Availability Console" to create a standby database, but, the option is not available. Under "Data Gaurd Summary" the page shows "Oracle DataGaurd is not configured on this database."
How do I configure this option so that I can use the console to create Standy databases? I have looked everywhere I can think of and cannot find any instructions!Click on your database name, and you'll be lead to a page which shows you all the statistics of your Db
Click on the "Availability" Sub Tab.
You'll see the option to "Add Standby Database". You can take it from there. (you'll be prompted to log in to your database -- log in with sys)
Now click on "Add Standby Database"
The process I normally follow is this
1. RMAN your primary
2. Create standby control file from primary.
3. Get your init file from primary
4. Copy everything over.
5. Make the init file changes (fal client, fal server on primary, any kind of directory mapping, point the init file to the standby control file on the standby side)
6. Bring up the standby db (doing all the other changes that are required)
Then you can import that Db into OEM,
or you could just use the Wizard from OEM :) -
I am new to ruby on rails.Can anybody tell me how to solve this problem.
i installed ruby,sap,and saprfc-0.11-mswin32.gem .
i create one project and when i try to execute this its showing this error:
C:\rails\sapsample>ruby script/server
=> Booting WEBrick...
C:/Ruby/lib/ruby/gems/1.8/gems/activerecord-2.2.2/lib/active_record/connection_a
dapters/abstract/connection_specification.rb:60:in `establish_connection': devel
opment database is not configured (ActiveRecord::AdapterNotSpecified)
from C:/Ruby/lib/ruby/gems/1.8/gems/activerecord-2.2.2/lib/active_record
/connection_adapters/abstract/connection_specification.rb:53:in `establish_conne
ction'
from C:/Ruby/lib/ruby/gems/1.8/gems/rails-2.2.2/lib/initializer.rb:392:i
n `initialize_database'
from C:/Ruby/lib/ruby/gems/1.8/gems/rails-2.2.2/lib/initializer.rb:139:i
n `process'
from C:/Ruby/lib/ruby/gems/1.8/gems/rails-2.2.2/lib/initializer.rb:112:i
n `send'
from C:/Ruby/lib/ruby/gems/1.8/gems/rails-2.2.2/lib/initializer.rb:112:i
n `run'
from C:/rails/sapsample/config/environment.rb:13
from C:/Ruby/lib/ruby/site_ruby/1.8/rubygems/custom_require.rb:31:in `ge
m_original_require'
from C:/Ruby/lib/ruby/site_ruby/1.8/rubygems/custom_require.rb:31:in `re
quire'
... 9 levels...
from C:/Ruby/lib/ruby/gems/1.8/gems/rails-2.2.2/lib/commands/server.rb:4
9
from C:/Ruby/lib/ruby/site_ruby/1.8/rubygems/custom_require.rb:31:in `ge
m_original_require'
from C:/Ruby/lib/ruby/site_ruby/1.8/rubygems/custom_require.rb:31:in `re
quire'
from script/server:3
thanksHi,
It seems that you're in the wrong forum: this one is about Visual Composer (not Visual Administrator).
Regards,
Yaniv. -
I'm trying to do SSO, configured policy in Access Manager as per integration steps in b25347.pdf
I couldn't locate policy.properties or sso directory in Oracle AS10.1.3.1.1
I dont know what i'm missing ?Thank you,Madrid!
I have resolved the problem by setting the
ORACLE_HOME to the right value.
And thank all of you.
But I still can't unstand why I could connect tothe
database through user "system" without setting
ORACLE_HOME environment variable???Hi everyone,
I too, have encountered this problem. The user i
used to install Oracle 10g Express is a member of
ORA_DBA group AND it also has Windows admin. rights.
However, i am not able to connect / as SYSDBA.
Where and how in Windows can I verify ORACLE_HOME
environment variable? and where can i check if it is
pointing to oracle_sid? i have search for this
pattern but was unable to find it.
Thanks all for your help!Thanks everyone for all your replies. I verified and sure enuf, oracle_sid was not set the the db name
Thanks! -
DW Procedures to connect to MS ACCESS database located on remote server
I am confused about the procedures within Dreamweaver CS3 to connect to a MS ACCESS database on a remoter server.
I am working through a tutorial book, "Dreamweaver 8 with ASP, Cold Fusion and PHP Training from the Source", but the instructions are unclear concerning the procedures to connect to a MS ACCESS database located on a remote server.
The book indicates that the server administration has to create the DSN for you and screen shots indicate that you will result in a list of DSNs to choose from when creating the connections .asp file.
I went through the procedures to create a connections .asp and resulting in a connection without and tables (of course) because I do not initially have any connection information from my remote site.
I have generated the required two lines of code as follows for my MS ACCESS database connection on my remote server:
'Database connection info and provider
strCon="Provider=Microsoft.Jet.OLEDB.4.0;Data Source="&_
Server.MapPath("database\trans.mdb") & ";" &_
"User ID=xxx;Password=xxxxx"
The question that I have is:
How does this connection coding relate to the "connections/conn_newland.asp" file that was create within the Dreamweaver screens? How do I merge the ASP coding? The file (/connections/conn_newland.asp) generated within Dreamweaver is as follows:
<%
'FileName="Connection_odbc_conn_dsn.htm"
'Type="ADO"
'DesignationType="ADO"
'HTTP="true"
'Catelog=" "
'Schema
Dim MM_conn_newland_STRING
MM_conn_newland_STRINT = "dsn=newland;"
%>
Any advice would be appreciated. I know that this is simple but debugging an error from an ASP coding merge would be a "bear" to debug!I have not used MS Access myself (fortunately) but I believe it works much like the old, old way of achieving a multi-user database in FileMaker.
That is, it is not a true client-server database but more a peer-to-peer database and that each peer opens the same database file which is available to multiple user via file sharing. Therefore as elikness said it should just be a matter of putting the files on your Lion Server and then sharing that folder/volume using SMB sharing.
However one thing to be aware of, since MS Access is not a true client-server database I would imagine it uses record locking to manage simultaneous direct access to records in the same files. File or Record locking is something that has historically been a bit flakey when using Windows clients with a Mac file server (and probably vice versa).
While I am not proposing it as a solution to consider seriously, it is worth you knowing that FileMaker Pro is a database system that is available for both Mac and Windows and depending on how you configure things can be considered to stretch from a configuration very similar to MS Access at the low end all the way to a high-end MS SQL Server style setup at the top end. See http://www.filemaker.com for details.
There is also a a third-party tool available for migrating databases to or from FileMaker Pro and it can convert MS Access databases to FileMaker Pro see http://www.fmpromigrator.com/
You could use FileMaker Pro just on Windows machines if you wish. -
I'm getting this error and is there any way to resolve this without re-creating the service/s again, etc. Just curious if there are any suggestions/steps I may have missed, if not, I'll drop and recreate the services again
Anyway, I have a backup of the emkey.ora and put it in the sysman/config directory, but still doesn't work... please see below...
C:\Documents and Settings\abigail>emctl status emkey
Oracle Enterprise Manager 11g Database Control Release 11.2.0.1.0
Copyright (c) 1996, 2010 Oracle Corporation. All rights reserved.
Please enter repository password:
The Em Key is not configured properly or is corrupted in the file system and doe
s not exist in the Management Repository. To correct the problem:
1) Copy the emkey.ora file from another OMS or backup machine to the OH/sysman/c
onfig directory.
2) Configure the emkey.ora file by running "emctl config emkey -emkeyfile <emkey
.ora file location>".
C:\Documents and Settings\abigail>emctl config emkey -emkeyfile E:\app\abigail\p
roduct\11.2.0\dbhome_1\sysman\config
Oracle Enterprise Manager 11g Database Control Release 11.2.0.1.0
Copyright (c) 1996, 2010 Oracle Corporation. All rights reserved.
Please enter repository password:
The Em Key is already configured. To override the current configuration, run "em
ctl config emkey <options> -force".
C:\Documents and Settings\abigail>emctl config emkey -emkeyfile E:\app\abigail\p
roduct\11.2.0\dbhome_1\sysman\config -force -sysman_pwd ********
Oracle Enterprise Manager 11g Database Control Release 11.2.0.1.0
Copyright (c) 1996, 2010 Oracle Corporation. All rights reserved.
The Em Key could not be configured. Unable to access file E:\app\abigail\product
\11.2.0\dbhome_1\sysman\config.
C:\Documents and Settings\abigail>emctl secure dbconsole -sysman_pwd ********
Oracle Enterprise Manager 11g Database Control Release 11.2.0.1.0
Copyright (c) 1996, 2010 Oracle Corporation. All rights reserved.
http://ABIGAIL:5501/em/console/aboutApplication
DBCONSOLE already stopped... Done.
Agent is already stopped... Done.
Securing dbconsole... Started.
Please enter repository schema password:
Securing dbconsole... Failed.
EMKey is misconfigured.Sorry but I'll have to ignore your suggestion, and don't worry about how I spend my time
AND OHMYGODD IT WORKSS!!! For future reference, this is how I solved it based on my searches, actually based on one particular search:
http://franjv.blogspot.com/2013/08/emkey-problems-in-oracle-rac-11gr2.html
Thank youuu whoever wrote that and... is it the same "Fran" who helped me the last time?!? Coincidence??
ANyway, thank youuuu
Maybe you are looking for
-
Error while compiling in JDev 9.0.4.1.1(Build 1436)
Hi, I am using JDeveloper Version 9.0.4.1.1 (Build 1436) and Java Version 1.5.0_04. But when I compile even a simple HelloWorld.java program also it is giving error: Error: initialization error: class file has wrong version 49.0, should be 45.3 or 46
-
Hi, I have few set of load test scenarios, I would like to add each of these test scenarios to "AutoPilot" and run each different scenario profile at different number of iterations. As in Oracle Load Testing the "Set Up AutoPilot" tab I see a sectio
-
Hard drive settings for Ultra 2, IBM DNES-309170, 390-0007 drives
I recently acquired an Ultra 2 workstation without hard drives. I found some working IBM DNES-309170 drives from a Dell Pentium 2 server and see that they are Sun part 390-0007 for use in the Ultra 2. When I try to load Solaris 8, an error appears th
-
Required attribute in dsp input tag
Hi dsp:input tag is unable identify the required attribute if i keep like this <dsp:input bean="something" type ="text" required="required"/> but it is working if i keep like this <dsp:input bean="something" type ="text">
-
Seagate Back Up Plus Desk/ Why can't I back up to my mac?
I have a Seagate back up plus desk but when I try to back anything up to it the disk is locked. I know I can reformat this disk but it may wipe anything that I have saved on my Windows machine Thanks