6101 lost all settings and numbers

I've had my 6101 about a year. When I turned it on this morning I discovered that I had lost all of my setting and phone numbers. I tested the SIM card - that wasn't to blame. Strangely some of my games are there plus SMS' I had sent, but no phone numbers, and everything else - wall paper, ring tone, etc had returned to factory settings.
I have spent the morning trying to put my phone back as it was, but am affair I have now lost some numbers permanently. I realise I should have backed-up my phone, but haven’t done so for quite some time.
The battery is fine, still lasts about 4 days, so that can't be it. Can anyone tell me what happened? How I could prevent it from happening again and is there anyway I can return it to the way it was?

@ wendio2007
Hi,
That's really strange .. Try to
1.) remove the battery leave it out for a while,
2.) turn on the phone
3.) restore factory settings
4.) create a new contact and check ot see if it stays.
see if it helps.. of not, maybe you could have the phone checked at a Nokia Service Center..
Cheers
Let me be a ripple in the silent stream of your memory ~ Viveca

Similar Messages

  • Mail lost all settings and does not allow to see old messages

    One day I launched mail and it appeared as if it was starting for the first time. I aborted the procedure, rebooted and relaunched mail but again. So I regave all the necessary parameters. Then I noticed that Mail had actually kept all the previously custom folders but would not show -a part from the most recent ones- all older messages in Inbox. I looked into Library/Mail/mailboxes and found the missing messages but whenever trying to reimport them into mail got the message that Mail could not find messages in a format acceptable to Mac OS. Actually the messages can be opened with the Mail (but not imported) and have extension .emlx
    As an addtional info, the problem appeared shortly after I had switched hosting service but I do not see how this could have affected mails sitting in my hard disk.
    It should also be noted that I am receiving and reading new mails without problem.
    Any suggestion on how to recover my messages and have them again accessible in my Inbox?
    Thanks.
    Stefano

    What you’ve described could be the result of having set up the account differently and Mail not recognizing the account folder already present in ~/Library/Mail/ — see below a more thorough description of this particular issue. If this is a POP account, the most recent messages in Inbox might appear to have been preserved because they were still on the server and Mail downloaded them again as if you had never set up this account in Mail before.
    Under some circumstances (e.g. lack of available disk space, filesystem corruption, repeated crashes), Mail may discard the current ~/Library/Preferences/com.apple.mail.plist preferences file and create a new one. This file is where all the account settings are stored. As a result, all your non-.Mac account settings (but not the messages themselves) are lost. If you had a .Mac account, its settings would appear to have been preserved because Mail would set up that account automatically using the System Preferences > .Mac settings.
    Verify/repair the startup disk (not just permissions), as described here:
    The Repair functions of Disk Utility: what’s it all about?
    After having fixed all the filesystem issues, if any, and ensuring that there’s enough space available on the startup disk (a few GB, plus the space needed to make a backup copy of the Mail folder), quit Mail if it’s running, and make a backup copy of the ~/Library/Mail folder, e.g. by dragging it to the Desktop while holding the Option (Alt) key down, just in case something else goes wrong while trying to solve the problem. This is where all your mail is stored.
    There are three ways you could have solved this problem (#2 is what you did):
    (1) Restore ~/Library/Preferences/com.apple.mail.plist from a backup if you have one. Mail shouldn’t be running while you do this.
    (2) Set up your mail accounts again. If given the option to import existing mailboxes or something like that, don’t. Just enter the account information and Mail will automagically rediscover the data in ~/Library/Mail/ when done. You’ll also have to re-configure most of your settings in Mail > Preferences. For spam-related security reasons, the first thing you should do is go to Preferences > Viewing and disable Display remote images in HTML messages if it’s enabled.
    (3) Mail may have renamed the old preferences file to com.apple.mail.plist.saved. If that’s the case, you may try trashing the new com.apple.mail.plist and renaming the old com.apple.mail.plist.saved back to com.apple.mail.plist. Again, be sure Mail isn’t running while doing this. Given the circumstances, I would expect com.apple.mail.plist.saved to be corrupt, but apparently that often is not the case and the settings can indeed be restored by just renaming it back to com.apple.mail.plist.
    Note: For those not familiarized with the ~/ notation, it refers to the user’s home folder. That is, ~/Library is the Library folder within the user’s home folder, i.e. /Users/username/Library.
    <hr>
    For each mail account, Mail creates a folder in ~/Library/Mail/ whose name starts with the account type (POP, IMAP, Mac), followed by the account username and the incoming mail server.
    When re-creating com.apple.mail.plist, setting up an account with a username and an incoming mail server that exactly match one of the already existing account folders in ~/Library/Mail/ causes Mail to automatically recognize and reuse that account folder. If the username and/or the incoming mail server are different and don’t match an already existing account folder, however, a new account folder is created from scratch, that account behaves as if it had never been set up in Mail before, the old account folder is simply ignored, and the messages it contains become inaccessible other than by manually importing them or setting up the account again.
    If you have more account folders in ~/Library/Mail/ than accounts in Mail > Preferences > Accounts, that means some of the account folders have been created anew whereas others are being ignored by Mail (and hence, you don’t have access to the mailboxes and messages stored within them). You can, however, import their contents doing File > Import Mailboxes, choosing Mail for Mac OS X as the data format, and following the instructions. You can get rid of the unused account folders afterwards.
    Pay attention to the instructions that Mail displays when choosing Mail for Mac OS X as the data format. In the next step, Mail wants you to select the folder that contains the mailboxes to be imported (i.e. the folder where the *.mbox folders to be imported reside), not the *.mbox folders themselves nor the Messages folders within them. If you select the wrong folder, Mail says “No valid Mail for Mac OS X files were found” because it cannot find any *.mbox folders within the folder you’re selecting.
    Alternatively, you may try re-creating com.apple.mail.plist again and this time use the exact same username and incoming mail server that Mail used to name the old account folder.

  • Lost all contents and settings during 'routine' update to v1.1

    Hi all,
    Not too sure what went wrong, but I lost all settings and data during what I thought would be a routine firmware update.
    In the middle of the update, the phone hung, and the PC gave me the error message that it needed to restore to what turns out to be factory settings. All settings, data, notes and pictures were gone! (no warning given!)
    Since I didn't have a chance to download these before I got started, I'm not too sure what to say - if you see a way of backing up your phone before you update the firmware, I'd recommend that you do it.
    I've updated a lot of firmware in my life - I'd have to say this is the worst and the first time ever that I've lost data.
    In case anyone from Apple monitors this site - is there a way to seperate the data and the firmware area, so that if this kind of thing happens, you only wipe the firmware area?
    The phone even initially told me I had to re-register and only offered me a way to make an emergency call ...
    -R

    Have you docked your Iphone in before updating? If so your contacts and settings should be saved. Yes your picture's are going to gone because you have to manually save them. According to this post http://discussions.apple.com/thread.jspa?threadID=1069906&tstart=0 it looks like the activation is down with ATT so this is why you are having problems getting all your contacts and settings and having to reactivate.
    Message was edited by: XFaega

  • My wife and i share the same computer to sync our phone with. All of a sudden i lost all my phone numbers and got hers. How do i get mine back. Help Please

    My wife and i share the same computer to sync our phones with. The last time i sync i lost all my phone numbers and got hers. Is there a way to get mine back. Please Help. Thanks

    Have a read here...
    https://discussions.apple.com/message/18409815?ac_cid=ha
    And See Here... http://support.apple.com/kb/HT1495
    Create a New User Account for each User.
    Then Each user will have their own iTunes library..
    More Info Here >  cnettv.cnet.com/use-two-iphones-one-computerl

  • Lost all my phone numbers in my iphone 4 and my iclod account was without any numbers. how can i get my contacts back?

    Lost all my phone numbers in my iphone 4 and my iclod account was without any numbers. how can i get my contacts back?

    If they were on your phone when you last backed up you could try restoring to your backup.  This may restore them if you follow this user tip: https://discussions.apple.com/docs/DOC-4841.

  • I deleted my iCloud because I thought it was not working and I have lost all my phone numbers, how do I get my numbers and/ my account back

    I deleted my iCloud because I thought it was not working and I have lost all my phone numbers, how do I get my numbers and/ my account back?

    i had te same problem, funny it worked too... 
    next questions i have:
    my msn contacts (emails) show up in my calling countact in the iphone, i would like to not see them here, how can i get rid of them?
    i would like my phone number contacts to be saved in outlook in the event i forget my phone home!  is this possible as the only way i see to access them is by the phone...
    thanks alors!

  • Reset all settings and lost everything - help

    I accidently touched reset all settings and without warning - took everything off my iPhone - contacts, photos, apps etc    I am so stressed right now

    There is No Pre-installed Youtube App in iOS 6.
    http://itunes.apple.com/app/youtube/id544007664?mt=8

  • I accidently deleted my iCloud account and lost all calendar and iPhone phone numbers.  Can you help retrieve them?

    I accidently deleted my iCloud Account & lost all Calendar and Contacts List data.  Can you help me retrieve my account and data?

    Welcome to the Apple Community.
    Just log back into your account.

  • I have lost ALL my phone numbers. I have 4s with 7.0.   Can I get them back?

    I don't want iCloud, never did. Yet it is aggressively asking for me to sign in. Sometimes I cannot cancel and held hostage. I have lost ALL my phone numbers by fooling with this unnecessary Apple push. I wanted to see if I had anything I. Cloud and could see a thing.  Can I get the numbers back?  I have 4s with 7.0. update.  I blame Apple for pushing the icloud.

    iTunes backs up your phone everytime you sync, if you have set it up to do so.
    See the link below for how to restore from the most recent backup:
    http://support.apple.com/kb/ht1766
    If that backup contains the contacts you lost, they will be restored. Otherwise they are gone.

  • My IPAD won't accept my wi-fi password. I have tried resetting all settings and network settings but still won't accept it. Can't download to new version of IOS either, says software update server could not be contacted.

    my IPAD won't accept my wi-fi password. I have tried resetting all settings and network settings but still won't accept it. Can't download to new version of IOS either, says software update server could not be contacted.

    Yes I have put in the correct password, its all numbers so can't get it wrong really.
    It has connected before as has my iPod and that won't connect either. I have checked that they aren't on the blocked list of the wi fi. Managed to download the new version of iOS and that hasn't made a difference.
    I have the wi fi plugged directly into the computer rather than the booster hub as the computer won't connect to it when its in the hub. I did get the iPad to connect to the internet when it twas in the hub but once I upgraded the iOS it won't accept the wifi password in the hub either.

  • HT201317 Photos from my iphone and ipad are going into my photo stream on the devices but aren't going into the folder on my windows PC. They used to but they suddenly stopped. Has anyone else had this same problem?. I have checked all settings and they a

    Photos from my iphone and ipad are going into my photo stream on the devices but aren't going into the folder on my windows PC. They used to but they suddenly stopped. Has anyone else had this same problem?. I have checked all settings and they appear OK

    Hi AP_In_Surbiton,
    I am really sorry that you have had so much trouble getting your Caller ID up and going.  I'll be happy to help you out with this and get it working for you.
    Could you drop me in an email please? Use the 'contact us' form in my forum profile under the 'about me' section. You can find it by clicking on my username.
    Thx
    Craig
    BTCare Community Mod
    If we have asked you to email us with your details, please make sure you are logged in to the forum, otherwise you will not be able to see our ‘Contact Us’ link within our profiles.
    We are sorry but we are unable to deal with service/account queries via the private message(PM) function so please don't PM your account info, we need to deal with this via our email account :-)”
    td-p/30">Ratings star on the left-hand side of the post.
    If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.

  • I have downloaded the most recent version of Iphoto and it no longer works period. I lost all photos, and the app crashes every time I try to open it. How can this be fixed?

    I have downloaded the most recent version of Iphoto and it no longer works period. I lost all photos, and the app crashes every time I try to open it. How can this be fixed?

    Post the first 50 lines only of the crash report
    Regards
    TD 

  • I have an iPad 1st generation that no longer has working volume buttons but every once in a while the sound turns on.  So I know the speakers still work.  I have tried resetting all settings and made sure that my side switch was auto lock not auto mute.

    I have an iPad 1st generation that no longer has working volume buttons but every once in a while the sound turns on.  So I know the speakers still work.  I have tried resetting all settings and made sure that my side switch was auto lock not auto mute. I have tried the mystical swiping upward on the screen with 4 fingers to get some special sound menu (which I never succeeded in getting).  My headphone jack doesn't work all the time either so some times my kids can hear their games and sometimes they can't.  I am super frustrated at this point.  So any suggestions would be great.  Am I missing something basic or do we just have a soundless iPad now?

    http://www.atreks.com/app-no-sound-on-ipad-4-%E2%80%93-what-to-do/
     Cheers, Tom

  • After updating to the latest iphone 4 software, my triple click to voice over no longer works. I have double and triple checked all settings and it just doesn't work anymore. Advice?

    After updating my iphone 4 last, my triple click to voice over stopped working. I have checked all settings and it just isn't working anymore. Is this an issue with the latest update? Any way to fix this?

    Try resetting your phone:
    Press the sleep/wake button & home button at the same time, keep pressing until you see the Apple logo, then release.
    Then, recheck your Settings: Settings>General>Accessibility>Triple-click Home...

  • I caught my phone 4. Had to buy a new one, lost all contacts, and calendar photos. how can I recover them

    I caught my phone 4. Had to buy a new one, lost all contacts, and calendar photos. how can I recover them?

    What does "I caught my phone 4" mean?
    All contacts, calendars, photos etc should be on your computer as the iphone is designed to be synced to your computer.
    Just sync them to your new iphone.
    iPhone: Transferring information from your current iPhone to a new iPhone

Maybe you are looking for

  • Application error message

    My nokia asha 201 fails to use all apps, facebook, whatsapp, mail, twitter and even fails to go at internet instead it gives me the message of application error, out of memory, memory error so what should i do to restore all these functions on my pho

  • Mega 180 keeps on booting

    a week o 2 ago it started booting itself, usually when playing cs, or when surfinwit firefox as browser.. think it may have done it with ie, aint sure.. and also when playing it minimizes the game into tray.this occurs with nfs most wanted and cs. i

  • Can we pass more than a string as SECURITY_PRINCIPAL to an EJB?

    Hi there, I am wondering if we could pass more than just a String as a SECURITY_PRINCIPAL to an EJB? For example, if I have EJB_1 on server_A that calls EJB_2 on server_B, when EJB_1 creates the InitialContext, I will need to pass in "Username" and "

  • Contextual event on table not triggered

    Using Jdev PS4. Concider following example: http://www.yonaweb.be/ContextualEvent.zip (I know following example can be simplified by using master-detail relation in the data control but it's to illustrate the example) I have two taskflows: EmployeeTF

  • Shared Services Error: Failed to load Tree

    Hi All, I am trying to open up an application in Shared services under the projects folder: path : Projects -> Analytic Servers:<Server Name> -> <Application> When I do this the page just keeps loading for a very long time and then gives me an error